Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

Purchase of Real-Time Spectrum Analyzer for use with DRAO Reverberation Chamber

Open
26-58221International

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The National Research Council of Canada is soliciting the procurement of a low-noise, ultra-sensitive real-time spectrum/signal analyzer (RTSA) for use with the Dominion Radio Astrophysical Observatory (DRAO) reverberation chamber. The device is intended to characterize electromagnetic emissions from a device under test and qualify them against telescope protection levels. Key technical requirements include a frequency range from 100 kHz to 26.5 GHz, an acquisition bandwidth of 1.2 GHz or greater for streaming I/Q data in a non-proprietary format, an acquisition time of at least 500ms at 1200 MHz, and an internal RF preamplifier with an average gain of 20 dB. Bidders must also meet a mandatory technical criterion of a typical DANL ≤ -160 dBm for frequencies up to 20 GHz. The contract is a fixed-price agreement with an initial term of one year following the award, and all deliverables must be received by March 31, 2027. The successful contractor must provide a one-year full warranty, with an option to extend to 24 months, and ensure full technical support from the contractor and original equipment manufacturer for at least five years. Delivery is based on DAP Incoterms 2020, and the contract is governed by the laws of British Columbia. There are no set-aside requirements for this solicitation, and no security clearances are required. Offers are evaluated based on technical and financial criteria, with pricing submitted in Canadian dollars.

General Info

NRC seeks a low-noise real-time spectrum analyzer for the DRAO reverberation chamber.

Place of Performance

Canada, South America, United States of America, Mexico, Europe, North America, World, CAN

Set-Aside

NONE

Documents

8
PDF, High priority: read this firstrfp
High
PDF, High priority: read this firstrfp
High
PDF, High priority: read this firstbid-schedule
High
PDF, High priority: read this firstspecifications
High
PDF, High priority: read this firstspecifications
High
PDF, High priority: read this firstspecifications
High
PDF, High priority: read this firstrfp
High
PDF, High priority: read this firstrfp
High

Read all 8 documents

Due in 25 days

Every page of every file, in your free workspace.

Read the documents

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

View Full Breakdown
Due in 25 days

Everything you need to bid on this one

Open the full contract in your free workspace.

  • 8 solicitation documentsRead every page
  • AI contract breakdown12 sections, Uniform Contract Format
  • Buyer contactEmail and phone
Open the full contract

Ask CLEATUS

I've read this contract. Ask me anything.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyGovernment of Canada → National Research Council of Canada
Contacts1 person available
OfficeN/A

Full Description

Show more
To procure a 1.2 GHz acquisition bandwidth real-time spectrum/signal analyzer (26.5 GHz) to capture and stream in-phase and quadrature (I/Q) data. The I/Q data streamed in a non-proprietary data format will be used to reconstruct complex time domain signals to perform frequency domain integration

Similar Contracts

Same NAICS industry code

NAICS: 334515
New
Federal
TRANSDUCER,PRESSURE
Solicitation # N0010426QNE87
This contract, issued by NAVSUP Weapon Systems Support Mech, is a solicitation for the teardown, evaluation, repair, and modification of 16 pressure transducers (NSN 016190354). The scope of work requires that all repaired items meet the operational and functional requirements of Cage Code 09L6 and reference number PX2421Z-50, adhering to the standards specified in 81349 MIL-P-24212/PGT-D-SG-SW-600G4. The contractor must perform all inspection and testing according to original manufacturer specifications, with final inspection and acceptance occurring at the origin. A critical requirement is that the materials must be mercury-free to prevent contamination on submarines and surface ships. The government will make a single award based on the most advantageous offer, prioritizing past performance over price. Technical acceptability is required for consideration, and the government reserves the right to award to other than the lowest priced offer. Key performance metrics include a requested Repair Turn Around Time (RTAT) of 509 days, with price reductions applied for failure to meet this timeline. The contract includes an option to increase quantity within 365 days of award. Packaging must comply with MIL-STD-2073, and marking must follow MIL-STD-130. Payment and invoicing are to be processed electronically via the Wide Area Workflow (WAWF) system.
Navsup Weapon Systems Support Mech

POSTED

about 5 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334515
New
SLED
Input Modules
Solicitation # TTI-ITB-1503
Texas A&M University has issued solicitation TTI-ITB-1503, an Invitation for Bid for the procurement of National Instruments input modules. This is a sole-source procurement where no substitutions of the manufacturer will be accepted, as the exact items are required to ensure complete compatibility with existing equipment. Bidders must certify a thorough review of all specifications and provide a minimum twelve-month warranty covering all parts and labor against defective materials, workmanship, and failures. The solicitation is open from November 19, 2026, with a response deadline of November 24, 2026, at 2:00 PM CST, and all submissions must be made via the AggieBid online portal. The award is based on technical compliance and adherence to administrative requirements, including agreement to Net 30 payment terms and Agency Terms and Conditions. Domestic deliveries must be shipped FOB Destination, Freight Prepaid and Allowed, while international deliveries must be shipped DDP to College Station, TX, with the vendor acting as the Importer of Record. Because the procurement is partially funded by federal sources, the winning vendor must comply with 2 CFR Part 200 Appendix II and certify they are not debarred or suspended from receiving federal funds. Additionally, vendors must comply with HB 127 regarding prohibited software and Executive Order GA-48, and must disclose any export controls under ITAR or EAR. This agreement is subject to cancellation without penalty if funds are not appropriated by the Texas Legislature.
Texas A&M University

POSTED

about 18 hours ago

DEADLINE

in 4 days
View Details

More opportunities from Government of Canada → National Research Council of Canada

Same awarding agency

NAICS: 541330
New
International
Windows upgrade services – Phase 1 (Corridor Link & Roofing)
Solicitation # 26-58209
The National Research Council Canada (NRC) is seeking a consulting firm or joint venture to provide construction administration and supervision services for the Window Upgrade Services – Phase 1 (Corridor Link and Roofing) project located at 1 Arctic Avenue, St. John’s, Newfoundland and Labrador. The selected consultant will act as the agent for the NRC Departmental Representative from the contract award through the completion of the warranty period, which typically lasts one year following the final certificate of completion. Key responsibilities include coordinating bi-weekly construction meetings, reviewing the Contractor Construction Safety Plan, developing a seasonal maintenance plan for the new windows and roofing, and conducting a final walk-through to document warranty issues. Deliverables for this project include bi-weekly inspection and status reports, a Final Commissioning Report, and As-Built CAD drawings provided in AutoCAD format. All work must adhere to the NRC Construction Documentation and Deliverables Manual and the NRC Engineering and Construction CAD Standards. The contract will be awarded to the compliant offer with the lowest evaluated price. The consultant must maintain professional liability insurance of at least $1,000,000 per claim for five years after completion. There is no set-aside status for this solicitation. Proposals must be submitted electronically by December 3, 2026, and include a separate financial proposal and certification documents.
Engineering Services

POSTED

about 12 hours ago

DEADLINE

in 13 days
View Details

Get AI-powered intelligence on this solicitation and the ones like it

Every solicitation package arrives shredded into a compliance breakdown and matched to your past performance, with incumbent history and alerts on amendments and award.

Miguel
Hillary
Keith Deutsch
Christine

Join 900+ contractors already using CLEATUS