Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

QPL-Approved Polysiloxane Enamel Supplier

Active

Federal

Response Deadline10/21/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract through the DLA DIST SAN JOAQUIN requires a QPL-approved manufacturer or distributor to provide high-durability, two-component polysiloxane coating for prime contractors. The specific requirement is for 18 cartridges of Class 2 semi-gloss, Grade B low solar absorbent enamel pigmented in Haze Gray, conforming to MIL-PRF-24635. Each 940 ML cartridge must have a minimum shelf life of 24 months and be accompanied by a Safety Data Sheet in compliance with 29 CFR 1910.1200. The opportunity is categorized under NAICS code 325510 and is associated with the Department of Defense. Performance for this contract will take place in Tracy, California. Interested parties should note the response deadline of October 21, 2026.

General Info

Agency

Department Of Defense → DLA DIST SAN JOAQUIN

NAICS

325510 - Paint and Coating Manufacturing

Place of Performance

TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE8ES-27-T-0097.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

ENAMEL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 15

subcontract

Response DeadlineOct 21

Submission deadline

Response Deadline

10/21/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA DIST SAN JOAQUIN

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA DIST SAN JOAQUIN

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies two-component, high-durability polysiloxane coating for prime contractors delivering DLA supply contracts. Manufactures or distributes Class 2 semi-gloss, Grade B low solar absorbent enamel pigmented in Haze Gray (color 26270) conforming to MIL-PRF-24635. Provides product in 940 ML cartridges with 24-month shelf life and SDS per 29 CFR 1910.1200. Manufacturer must be QPL approved. Delivers 18 cartridges of enamel.

Similar Contracts

Same NAICS industry code

MIL-SPEC Primer Coating ServicesThis subcontract for the DDSP New Cumberland Facility involves the provision of specialized primer coating services for fan components. The selected contractor will be responsible for surface preparation and the application of TT-P-645 primer coatings, adhering to modifications of MIL-F-18953B. All work must be performed in industrial coating facilities capable of meeting military-grade application and inspection standards, and the contractor must provide certification of compliance with TT-P-645 to ensure components are ready for final assembly. The opportunity is categorized under NAICS code 325510 and is managed by the Department of Defense. Interested parties must submit their responses by October 26, 2026. Performance of the contract will take place in New Cumberland, Pennsylvania.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE8ES-27-T-0097

Solicitation SPE8ES-27-T-0097 is a request for quotations for the procurement of enamel, identified by NSN 8010016753709, for the Department of Defense via DLA Distribution San Joaquin. The requirement consists of three units, specifically 18 cartridges of 940 ML each, with each cartridge requiring a shrink-wrapped static mixer. The product must be a two-component, high-durability polysiloxane coating, Class 2 semi-gloss, Grade B low solar absorbent pigmented in Haze Gray (color 26270), conforming to MIL-PRF-24635. The item is subject to a non-extendable shelf life of 24 months and requires the manufacturer to be QPL approved at the time of award. Delivery is required within 68 days, shipped FOB Destination to the DLA Distribution San Joaquin facility in Tracy, California, where both inspection and acceptance will occur. Due to the hazardous nature of the material, suppliers must comply with IP025 and 29 CFR 1910.1200, providing approved Safety Data Sheets and Hazard Communication Standard labels prior to award. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific attention to special marking code 32 for shelf life. The contract incorporates the Buy American and Balance of Payments Program and requires electronic invoicing through the Wide Area WorkFlow system. All quotes must be submitted via the DIBBS portal by October 21, 2026.

DLA DIST SAN JOAQUIN

POSTED

about 6 hours ago

DEADLINE

Rain Erosion Resisting Coating Kit SupplierThis subcontract involves the supply of eight rain erosion resisting coating kits, identified by NSN 8010-01-315-3897, to prime contractors supporting DLA supply contracts. The project is managed under the Department of Defense through DLA Dist San Joaquin, with performance taking place in Tracy, California. The supplier must adhere to strict packaging and safety standards, utilizing friction closure cans in accordance with MIL-STD-2073-1E and MIL-STD-129. Because the materials are hazardous, they must be shipped in 4G boxes, stored at temperatures between 70 and 100 degrees Fahrenheit, and accompanied by Safety Data Sheets as required by 29 C.F.R. 1910.1200.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Polyurethane Coating Supplier (NSN 8010017119846)This subcontract involves the supply of specialized Type I polyurethane coating, identified by NSN 8010017119846, for prime contractors supporting the Department of Defense at the DDSP New Cumberland Facility. The supplier is responsible for delivering five gallons of coating FOB Destination, ensuring the material maintains a 24-month shelf life. All shipments must adhere to strict military standards, specifically MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Compliance with hazardous materials regulations is mandatory, requiring adherence to IP025 and the submission of Safety Data Sheets and Hazard Communication Standard labels. The opportunity is categorized under NAICS code 325510, with performance taking place in New Cumberland, Pennsylvania. Interested parties must respond by October 20, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Turf Maintenance Tool and Paint SupplierThis subcontract opportunity is for a supplier to provide consumables and manual tools necessary for turf and bunker maintenance on City of Fort Worth Park and Recreation Department projects. The selected vendor will be responsible for the provision and delivery of tournament-grade bunker rakes, core field maintenance tools, and high-visibility turf-safe marking paint, all of which must strictly adhere to City of Fort Worth specifications. The contract is categorized under NAICS code 325510 and is managed by the City of Fort Worth in Texas. Interested parties must submit their responses by the deadline of October 20, 2026.

City Of Fort Worth

POSTED

DEADLINE

Enamel Paint SupplierThis subcontract involves the supply of specialized enamel paint to prime contractors supporting Defense Logistics Agency supply contracts for the USAF Prepositioning Program. The supplier is required to provide two quarts of enamel paint matching NSN 8010-00-472-5512, ensuring all materials are packaged according to MIL-STD-2073-1E standards, specifically utilizing QUP001 and PRESV MATT00. The completed shipment must be delivered FOB Destination to Al Udeid Air Base in Qatar within 60 days of the order. This procurement falls under NAICS code 325510 and is managed through the Department of Defense.

Defense Logistics Agency

POSTED

DEADLINE

QPL Polysiloxane Enamel SupplierThis subcontract, issued by the Department of Defense DDSP New Cumberland Facility, seeks a supplier for high-durability, one-component, semi-gloss, low solar absorbent pigmented polysiloxane enamel. The required product, identified by NSN 8010015870853, must strictly conform to MIL-PRF-24635F, FED-STD-595/26008, and QPL-24635-17 standards. The contract is for the delivery of one unit of conforming enamel on a FOB Destination basis to New Cumberland. Eligible suppliers must hold QPL approval and maintain full compliance with the Buy American Act and the Berry Amendment. Additionally, the contractor is required to provide HAZMAT shipping certification to ensure the safe transport of the materials. The solicitation was posted on October 14, 2026, with a response deadline of October 20, 2026, under NAICS code 325510.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Supply of Gray Primer Coating (Aerosol)This subcontract involves the supply of gray primer coating in aerosol form to support prime contractors delivering DLA supply contracts. The requirement consists of 78 total cans, delivered as 13 boxes containing six 12-ounce cans each of NSN 8010015107186. All supplied primer must have a minimum shelf life of 24 months and be delivered FOB Destination to DLA Distribution San Joaquin in Tracy, California. The contractor is responsible for strict adherence to military standards, including packaging and marking per MIL-STD-2073-1E and MIL-STD-129, and palletization according to RP001. Additionally, the provider must ensure all safety requirements are met by providing SDS and Hazard Communication labels in compliance with 29 C.F.R. 1910.1200. This procurement falls under NAICS code 325510 for the Department of Defense.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Supply of MIL-PRF-85285E Polyurethane CoatingThis subcontract involves the supply of 30 aerosol cans of specialized two-component polyurethane coating for prime contractors working on Department of Defense projects at the DDSP New Cumberland Facility. The coating must strictly adhere to MIL-PRF-85285E specifications, specifically Type 1, Class H, Form M, Grade N, and be provided in Flat Gray according to FED-STD-595. The provider is required to ensure all hazardous materials are packaged per IP025 and labeled in accordance with MIL-STD-129. Additionally, the contract mandates full compliance with the Buy American Act and the Berry Amendment. Delivery is set as FOB Destination to New Cumberland, Pennsylvania.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

MIL-PRF-85285 High-Solids Polyurethane Coating SupplierThis subcontract involves the supply of a two-component high-solids polyurethane coating kit intended for prime contractors on DLA supply contracts. The required coating must be manufactured in Gloss Gold per FED-STD-595 17043 and adhere to MIL-PRF-85285 specifications, consisting of a clear aliphatic isocyanate and pigmented polyester resin. The supplier is responsible for delivering one kit that maintains a minimum shelf life of 12 months. To be eligible, the provider must hold QPL approval for MIL-PRF-85285 and ensure full compliance with 29 C.F.R. 1910.1200 safety standards. This procurement falls under NAICS code 325510 and is managed by the Department of Defense. Interested parties must respond by October 20, 2026.

DLA PACKAGING REQUIREMENTS FOR PROCUREMENT FOR KIT SIZES BETWEEN

POSTED

DEADLINE

Polyurethane Coating Material SupplierThis subcontract, issued by the Department of Defense for the DDSP New Cumberland Facility, requires the supply of 12 gallons of high-performance polyurethane coating. The material must strictly adhere to NSN 8010-01-644-1286 specifications, specifically accepting Axalta or DuPont part number 864356EP. The supplier is responsible for ensuring the coating is warranted and delivered to the designated destination point in New Cumberland. Compliance is mandatory regarding MIL-STD-2073-1E packaging standards and 29 CFR 1910.1200(g) safety data sheet requirements. Additionally, the material must maintain a non-extendable shelf life of 24 months in accordance with RS016. Interested parties must respond by October 20, 2026, under NAICS code 325510.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Semigloss Green Enamel Supplier (NSN 8010-01-344-5101)This subcontract involves the supply of 50 containers of semigloss green enamel, identified by NSN 8010-01-344-5101, for prime contractors supporting DLA supply contracts. The enamel must be manufactured or sourced to meet MIL-DTL-24607B and FED-STD-595 color number 24585, Type 2 specifications, ensuring a minimum extendable shelf life of 12 months. All materials must be packaged and marked in accordance with MIL-STD-129 and MIL-STD-2073-1E standards. The contract is managed by the Department of Defense through DLA DIST SAN JOAQUIN, with performance taking place in Tracy, California. Compliance with the Buy American Act and OSHA/29 CFR 1910.1200 safety regulations is mandatory. Interested parties must respond by October 20, 2026, under NAICS code 325510.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA DIST SAN JOAQUIN

Same awarding agency

Supplier of Aluminum Oxide Abrasive Wheels (NSN 3460-00-528-3113)This subcontract involves the supply of 317 marked aluminum oxide abrasive wheels for prime contractors supporting DLA Distribution San Joaquin. The required wheels must be manufactured to specific dimensions of 4.000 inches in diameter, 0.062 inches in thickness, and a 0.500 inch arbor hole, featuring a 60 grit, Q hard bond grade with a rubber binder. Delivery is set as FOB Destination to Tracy, California. Compliance is mandatory with the Buy American Act and the Berry Amendment. Additionally, all products must adhere to MIL-STD-129, ASTM-D-3951-98, and RP001 packaging standards. The solicitation was posted on October 15, 2026, with a response deadline of October 26, 2026, under NAICS code 333515.

Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 6 hours ago

DEADLINE

Cybersecurity and Export Compliance ConsultingThis subcontract opportunity, titled Cybersecurity and Export Compliance Consulting, supports prime contractors working on DLA Weapons Support projects for the Department of Defense. The scope of work focuses on ensuring regulatory adherence through the preparation of firms for CMMC Level 2 Third-Party Assessments, the establishment of ITAR and EAR export control protocols, and the management of US/Canada Joint Certification Program certifications. Key deliverables include the creation of comprehensive security plans and detailed audit readiness reports. The project is associated with NAICS code 541690 and will be performed in Tracy, California. Interested parties should note that the solicitation was posted on October 15, 2026, with a response deadline set for October 26, 2026. The contracting agency is DLA DIST SAN JOAQUIN.

Other Scientific and Technical Consulting Services

POSTED

about 6 hours ago

DEADLINE

HazMat Packaging and LogisticsThis subcontract for HazMat Packaging and Logistics involves the specialized packaging, marking, and transportation of battery assemblies for prime contractors supporting DLA Weapons Support projects. The contractor is responsible for ensuring all items are packaged according to RP001, marked per MIL-STD-129 with specific shelf-life and special marking codes, and labeled in compliance with 29 CFR 1910.1200 and IP025. A mandatory HazMat shipping certification is required to perform these services. The scope of work concludes with the delivery of the processed batteries to DLA Distribution San Joaquin in Tracy, California. This opportunity falls under NAICS code 484220 and is managed through the Department of Defense. Interested parties must adhere to the response deadline of October 26, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 6 hours ago

DEADLINE

Battery Enclosure and Hardware FabricationThis subcontract for Battery Enclosure and Hardware Fabrication involves the production of outer casings, terminals, connectors, and mounting hardware to support DLA Weapons Support battery assembly projects. The selected provider will be responsible for precision machining and the application of corrosion-resistant coatings to ensure all components meet strict technical drawings. Notably, the contract explicitly prohibits the use of additive manufacturing processes in the fabrication of these parts. Managed by the Department of Defense through DLA DIST San Joaquin, the work is to be performed in Tracy, California. The solicitation was posted on October 15, 2026, with a response deadline of October 26, 2026. The project falls under NAICS code 332312 and requires the delivery of completed housings and hardware kits to prime contractors.

Fabricated Structural Metal Manufacturing

POSTED

about 6 hours ago

DEADLINE

Battery Cell and Component SupplyThis subcontract opportunity with the Department of Defense, managed by DLA Distribution San Joaquin, involves the supply of raw battery cells, electrodes, separators, and specialized chemical components for DLA Weapons Support battery assembly projects. The selected provider will manufacture cells according to prime specifications, ensuring all materials meet shelf-life Code 32 and are accompanied by Safety Data Sheets in compliance with Federal Standard 313. Performance for this contract will take place in Tracy, California, under NAICS code 335911. Due to the nature of the technical data involved, strict adherence to ITAR and EAR regulations is required. Interested parties must submit their responses by October 26, 2026.

Storage Battery Manufacturing

POSTED

about 6 hours ago

DEADLINE

Specialized Chemical Packaging and Static Mixer SupplierThis subcontract with the Department of Defense, specifically DLA DIST SAN JOAQUIN, involves the supply of 18 shrink-wrapped static mixers and specialized packaging designed for prime contractors fulfilling DLA supply contracts. The supplier is required to provide one static mixer for every 940 ML polysiloxane cartridge, ensuring all materials meet strict military standards. Performance takes place in Tracy, California, and requires strict adherence to MIL-STD-2073-1E and MIL-STD-129 for packaging and marking, including the application of special marking code 32 for shelf life. Additionally, the supplier must comply with IP025 hazardous material packaging standards to ensure safe and compliant delivery of the components.

All Other Miscellaneous Manufacturing

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE7L7-27-T-0274

Solicitation SPE7L7-27-T-0274 is a request for quotations for the procurement of 37 power supply units, identified by NSN 6130-01-486-3226 and Rockwell Automation part number 1756-PA72. This is a Service-Disabled Veteran-Owned Small Business set-aside cascade, though other small businesses may be considered if no qualified SDVOSB offers are received. The procurement is managed by DLA Distribution San Joaquin, with a need ship date of January 30, 2027, and an original required delivery date of June 5, 2027. Delivery is FOB destination to the DLA Distribution San Joaquin facility in Tracy, California, where both inspection and acceptance will occur. The contract mandates strict adherence to technical and quality requirements via the DLA Master List, specifically referencing RA001, RC001, RP001, and RQ011. Packaging must comply with MIL-STD-2073-1E and RP001, while marking must follow MIL-STD-129. A critical restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions. Offerors must comply with the Buy American Act and the Berry Amendment, and any items produced via additive manufacturing are ineligible for award. Invoicing and payment are to be processed electronically through the Wide Area WorkFlow system.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 6 hours ago

DEADLINE

BATTERY ASSEMBLY

Solicitation # SPE7L7-27-T-0278

Solicitation SPE7L7-27-T-0278 is a fixed-price request for the procurement of 10 battery assemblies (NSN 6140-01-558-5093) for the Department of Defense, specifically DLA Weapons Support. The items are to be delivered FOB Destination to DLA Distribution San Joaquin in Tracy, California, with a need ship date of May 4, 2027, and a final required delivery date of July 17, 2027. The procurement is categorized under NAICS code 335910 and includes a price evaluation preference for certified HUBZone small business concerns. This contract carries stringent technical and security requirements, including CMMC Level 2 certification and strict adherence to export controls under ITAR and EAR, requiring approved US/Canada Joint Certification Program certification for data access. Packaging must comply with MIL-STD-2073-1E and RP001, with specific marking requirements per MIL-STD-129, including shelf-life code 32. Because the items may be hazardous, contractors must provide a Safety Data Sheet and ensure labeling complies with 29 CFR 1910.1200. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for all electronic invoicing and payment requests.

Battery Manufacturing

POSTED

about 6 hours ago

DEADLINE

WHEEL, ABRASIVE

Solicitation # SPE85-27-T-0239

Solicitation SPE85-27-T-0239 is for the procurement of 317 abrasive wheels (NSN 3460-00-528-3113) for the DLA Distribution San Joaquin facility in Tracy, California. The specified wheels must be 4.000 inches in diameter, 0.062 inches thick, with a 0.500 inch diameter arbor hole, featuring aluminum oxide, 60 grit size, Q hard bond grade, and a rubber binder. All units must be marked with their maximum RPMs. Delivery is required by September 11, 2026, with a need ship date of September 29, 2026, and terms are set as FOB Destination. The contract mandates strict adherence to packaging and marking standards, including MIL-STD-129 for labeling, ASTM-D-3951-98 for commercial packaging in new and unused containers, and RP001 for palletization. Inspection and acceptance will occur at the destination. Compliance requirements include the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. Offerors must provide size status representations and disclose any covered defense telecommunications equipment used in the performance of the award.

Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE8E7-27-T-0204

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE8E4-27-T-0089

Nonferrous Forging

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE8E6-27-T-0291

Welding and Soldering Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS