This Combined Synopsis/Solicitation opportunity from Department Of The Army was posted on June 3, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Quaestor 8000 Standard

Closed

W911S225U0848Federal

Submission Closed06/12/2025, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334519

New

SLED

Flagler Scale Replacement

Solicitation # DOT-SS-27-9024-JM

The Florida Department of Transportation, Office of Motor Carrier Size and Weight, is initiating a single source procurement for the Flagler Scale Replacement project, identified by solicitation number DOT-SS-27-9024-JM. The project involves a static scale partial replacement at the I-95 Northbound and Southbound locations in Florida to reduce average wait times for overlength trucks. The scope of work includes extending existing scales to a 50-foot platform and modifying the scale pit configuration by extending it by 10 feet. The agency intends to award the contract to Mettler-Toledo, LLC, as their proprietary electronic scales and Weigh-In-Motion software are essential for critical system functions, including auto calibration, center of gravity assessment, auto release, and WIM record verification. The estimated contract value is 866,046.00 dollars with a performance period of 8 months. This procurement is being handled as a sources-sought notice to determine if the required services are available from a single source. Prospective vendors were required to submit information regarding their capabilities by November 19, 2026. The primary point of contact for this action is Jocelyn Moore, with the request originating from Pamela Blake of the Motor Carrier Size and Weight office.

Florida Department of Transportation

POSTED

DEADLINE

Supply of Incandescent Lamps (NSN 6240-01-563-9037)This subcontract through the Defense Logistics Agency involves the supply of 220 specialized incandescent lamps, specifically part number M6363/9-2 under NSN 6240-01-563-9037. The contractor is responsible for manufacturing or sourcing lamps that strictly adhere to MIL-DTL-6363J Revision J and MIL-DTL-6363/9A Revision A standards. All deliverables must meet rigorous quality assurance protocols per MIL-STD-1916 or ASQ H1331, with marking requirements following MIL-STD-129 and packaging compliant with RP001 and ASTM D3951. The project is subject to strict regulatory requirements, including mandatory compliance with the Berry Amendment and the Buy American Act. Performance for this contract is centered in Phoenix, Arizona, under NAICS code 334519. Interested parties must submit responses by November 9, 2026, to support prime contractors on DLA Troop Support projects.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Fire Detector Sensing Elements (NSN 6350-37-530-6235)This subcontract involves the manufacture or sourcing of fire detector sensing elements meeting NSN 6350-37-530-6235 specifications for prime contractors supporting Department of Defense DLA supply contracts. The scope of work includes the production, marking, and labeling of radioactive materials with activity exceeding 0.002 microcuries per gram in strict accordance with safety regulations. The selected provider is responsible for delivering the packaged and labeled elements to the designated DLA delivery point in New Cumberland. Administrative requirements for this opportunity include mandatory registration in both SAM and WAWF. The contract falls under NAICS code 334519 and is associated with the DDSP New Cumberland Facility. Interested parties must submit their responses by the deadline of November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Supply of Fluorescent Lamps (NSN 6240-01-582-8354)This subcontract involves the supply of fluorescent lamps under NSN 6240-01-582-8354 for prime contractors supporting Defense Logistics Agency Troop Support. The contractor must adhere to the DLA Master List of Technical and Quality Requirements RA001, with packaging and marking following MIL-STD-2073-1E, RP001, and MIL-STD-129 using Special Marking Code 01. All deliverables must comply with the Buy American Act and the Berry Amendment. The scope of work requires the delivery of 73 packages, each containing 40 lamps, shipped FOB Origin to Phoenix, Arizona. This procurement falls under NAICS code 334519 and is managed by the Department of Defense.

Defense Logistics Agency

POSTED

DEADLINE

Reciprocating Counter ManufacturingThis subcontract involves the manufacture of 87 reciprocating counters under NSN 6680-01-390-8625 for prime contractors supporting the DLA Weapons Support Nuclear Reactor Program. The scope of work requires precision machining and assembly to produce completed and tested units that strictly adhere to quality standards RA001, RC001, RP001, RQ002, and RQ011. Quality assurance must be maintained through zero-based sampling in accordance with MIL-STD-1916 or ASQ H1331. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 334519 and is managed by the Department of Defense. Performance for this contract will take place in Tracy, California. Interested parties must respond by November 9, 2026, to provide the required hardware for the nuclear reactor program.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Supply of Fuel Flow Meter (NSN 6680011855660)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Radiation Sensing Elements & Electronics SupplyThis subcontract opportunity is for the supply of radiation-sensing tubes, detectors, and military-grade electronic circuit boards to support DLA Weapons Support Maritime Supply Chain projects. The selected provider will deliver electronic and sensing component kits for six units, ensuring all PCBs and sensors meet specific technical requirements for detecting designated radiation types. The contract is designated as a Total Small Business Set-Aside under NAICS code 334519. Performance will take place in New Cumberland, Pennsylvania, and requires strict adherence to ITAR/EAR compliance and Hazard Communication Standards. Responses are due by November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Radiacmeter Precision Assembly & IntegrationThe Radiacmeter Precision Assembly and Integration subcontract is a total small business set-aside issued by the Department of Defense for the DLA Weapons Support Maritime Supply Chain. The project requires the final assembly, integration, and calibration of six Radiacmeters, adhering strictly to TDP Rev A Gen 1 and specific technical drawings. Work will be performed in New Cumberland, Pennsylvania, under NAICS code 334519. Due to the nature of the equipment, the contractor must hold US/Canada Joint Certification Program certification to ensure full ITAR and EAR compliance. Interested parties must respond by November 9, 2026, to provide the specialized technical services required for these prime contractor deliverables.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of Incandescent Lamps (NSN 6240-01-564-9098)This subcontract involves the supply of 97 incandescent lamps to prime contractors supporting the Defense Logistics Agency. The required items are identified by NSN 6240-01-564-9098 and Textron part number 45-35-0008. All deliverables must be shipped FOB Origin and must strictly adhere to packaging and marking standards per MIL-STD-129 and RP001, while meeting FED-STD-313 and TQ requirement IP025 for hazardous materials. The contractor is required to maintain full compliance with the Buy American Act and the Berry Amendment. Performance for this contract is centered in Greensboro, North Carolina, under NAICS code 334519. Interested parties must submit their responses by the deadline of November 9, 2026.

Defense Logistics Agency

POSTED

DEADLINE

Display Unit Manufacturing and SupplyThis subcontract involves the manufacture and supply of nine electronic Display Units, identified by NSN 7025-01-587-3102, to support prime contractors under DLA Troop Support supply contracts. The Department of Defense requires that all units be produced in strict accordance with the OEM Source Control Drawing and the DLA Master List of Technical and Quality Requirements. To be eligible, the provider must obtain OEM approval or a Source Approval Request certification and ensure full compliance with the Buy American Act and Section 889 regulations. The project focuses on the delivery of nine fully completed and tested units, with performance taking place in New Cumberland. This opportunity falls under NAICS code 334519 and is managed by the Construction and Equipment T & IFO EQ agency. Interested parties must adhere to the specified timeline, with a response deadline set for November 9, 2026.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

Supply of Humidity-Temperature Probes (NSN 6685008037705)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, requires the procurement of 12 specialized humidity-temperature probes identified by NSN 6685008037705. The selected provider must manufacture or source these probes in strict compliance with OEM specifications and provide comprehensive documentation regarding the brand, model, and OEM part numbers for the defense telecommunications equipment. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 334519, with the place of performance located at Tinker AFB. Interested parties must submit their responses by November 5, 2026, to support prime contractors delivering on DLA Weapons Support ASC contracts.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Humidity-Temperature Probe ManufacturerThis subcontract involves the manufacture of three high-precision humidity-temperature probes, identified by NSN 6685008037705, for prime contractors supporting DLA Weapons Support ASC projects. The manufacturer is required to fabricate the probes in strict accordance with MIL-DTL-27723F and MS27188 standards, utilizing inspection systems that comply with SAE AS9003 or ISO 9001. Additional technical requirements include sensor resistance monitoring and the provision of Safety Data Sheets and Hazard Warning Labels as mandated by 29 CFR 1910.1200. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, with the place of performance located at Robins Air Force Base. Interested parties must adhere to the timeline established by the posting date of October 28, 2026, with a response deadline set for November 5, 2026. The work falls under NAICS code 334519.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days

AI Contract Overview

The contract pertains to the procurement of a Quaestor 8000 Standard testing instrument designed for comprehensive testing of respiratory and breathing apparatus, including full-face masks, compressed air breathing devices, and closed-circuit systems. The device must be fully automatic, capable of testing Drager PSS 7000SCBA and Pas-Colt Escape paks, and equipped with features such as an external microphone, gauge holder, low-pressure measuring point, and a test head with a gel face. It should support various pressure ranges, including high, medium, and low-pressure inlets and outlets, with a breathing volume capacity of at least 134 liters per minute and a breathing frequency adjustable from 5 to 38 strokes per minute. The instrument must meet specific accuracy standards, operate within defined pressure and temperature ranges, and include necessary adapters for different system pressures, along with a 24V power supply compatible with 110/230V sources. Additional components covered under the contract include a case for the Quaestor 8000, a set of bypass relief valves, a spare bar module with output, and training for the Quaestor 8000. The solicitation, issued by the Department of the Army at Fort Drum, NY, is a total small business set-aside under NAICS code 334519, with a response deadline of June 12, 2025. The contract emphasizes the need for compliance with detailed technical specifications and includes points of contact for further inquiries.

General Info

Department of the Army seeks Quaestor 8000 test instrument procurement, small business set-aside, deadline June 12, 2025.

Agency

Department Of The Army → W6QM Micc-ft Drum

NAICS

334519 - Other Measuring and Controlling Device Manufacturing

Place of Performance

James FerraroBldg. 773 Indiana Ave.Fort Leonard Wood, MO 65473, 65473

Set-Aside

SBA

Documents

W911S225U0848_S2P2_Brand_Name_or_Equal_Ferraro__James_A_CIV_USARMY_MSCOE__USA__2025_06_02_08_52_36__EST_.pdf

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedJun 3

Combined Synopsis

Response DeadlineJun 12

Deadline has passed

Submission Closed

06/12/2025, 09:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of The Army → W6QM Micc-ft Drum

Contacts2 people available

OfficeFORT DRUM, NY, 13602-5220, USA

Organization / Agency

Department Of The Army → W6QM Micc-ft Drum

Office AddressFORT DRUM, NY, 13602-5220, USA

Contacts

James Ferraro

Joy Davis

Full Description

Salient Characteristics:001: Quaestor 8000 Standard: (R63260) Must be able to test Drager PSS 7000SCBA?s and Drager Pas-Colt Escape paks Must be a fully automatic test instrument for thetesting of full-face masks, compressed air breathing apparatus and closed-circuit breathingapparatus Must have training on new equipment provided by seller Must have an externalmicrophone Must have a gauge holder Must have a low-pressure measuring point Musthave a test head with gel face Must have a storage area for components Must have a CPSfilling connection Must have a medium pressure extractable inlet and a rotatable outletMust have a high-pressure inlet and outlet Must have a breathing volume of at least 134L/min The breathing frequency of the artificial lung must be at least 5 to 38 strokes a min.Must have a pressure sensor accuracy less than 1 according to DIN EN 837 Must havepermitted air pressure no less than 22 inHg and no more than 36 inHg Must weigh at least45 lbs. Must have a permitted low storage temperature of -20F and a permitted high storagetemperature of 136F Must have a high-pressure range of at least 350 bar Must have amedium pressure range of at least 25 bar Must have a low-pressure range of at least -40 to+30 mbar Must have adapters for 4500 psi systems and adapters for 3000 psi escapedevices Must have a connection for external microphone and external microphone must beprovided Must have a 24V power adapter for 110/230V power supply.002: Case Quaestor (3712635)003: Set Q6/8k bypass relief valve (3731941)004: Bar module, Spare set 200 bar module with output. (R58367)005: Quaestor 8000 Training