This Government Contract opportunity from Government of Canada was posted on May 26, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Quality Assurance and Certification Services

Closed

Canada

Submission Closed06/10/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380

New

SLED

South Concourse Renovation and Enabling Project Testing and Special InspectionsThe Port of Seattle is preparing to procure Testing and Special Inspection Services for the South Concourse Renovation and Enabling Project, a capital improvement initiative aimed at extending the useful life of the South Concourse and ensuring compliance with current building and safety codes. This undertaking involves comprehensive structural, seismic, and building system upgrades alongside the modernization of passenger areas to enhance functionality, safety, and accessibility. The primary objective of the procurement is to engage qualified third-party inspectors and testers to verify that all construction activities adhere strictly to applicable codes and standards, providing independent assurance of quality and regulatory compliance throughout the project lifecycle. The work is expected to support the long-term operational integrity of a key facility within the Port’s infrastructure. The solicitation, identified under NAICS code 541380 for Architectural, Engineering, and Related Services, is currently available as a forecast with a posted date of July 11, 2026. Although no solicitation number has been assigned yet, interested parties can access further information through the Port’s internal procurement portal. Point of contact for inquiries is Denise Casson, Port Contact, reachable via email at casson.d@portseattle.org. The project is located at the Port of Seattle’s facilities, with performance expected to occur on-site at the South Concourse location, though precise city and state details are not specified in the provided data. The procurement will be managed by the Construction Management division, with no set-aside provisions indicated.

Construction Management

POSTED

DEADLINE

Retro-Commissioning, TAB, Controls, and Regulatory Support IDIQA five-year indefinite delivery/indefinite quantity contract is in place to deliver retro-commissioning, Test/Adjust/Balance, and controls support services across the Port of Seattle’s aviation facilities and infrastructure systems. The consultant will assess and optimize mechanical systems including HVAC, plumbing, and lighting, identifying inefficiencies, correcting operational deficiencies, and ensuring compliance with safety and regulatory standards. The work aims to improve system performance, occupant comfort, and longevity while promoting energy efficiency and operational reliability. All activities will be initiated and managed through service directives issued by Aviation Facilities and Infrastructure, with direct collaboration between the consultant and Port staff to meet defined deliverables. The contract provides an ongoing framework for performance-based support without specifying exact volumes or timelines upfront, allowing flexibility to respond to facility needs as they arise. Primary point of contact is Jason Gates at the Port of Seattle, with Jim Farris serving as the project manager for coordination and oversight.

Aviation Facilities & Infrastructure

POSTED

DEADLINE

Uniform Quality Inspection and Compliance TestingThe County of Kauai is seeking a subcontractor to perform third-party testing and certification of uniforms to ensure full compliance with NFPA 1975 standards and specific county requirements. The purpose of this procurement is to verify that all uniforms meet the necessary safety, durability, and performance criteria mandated by national fire protection standards and local regulations. The work involves independent laboratory evaluation, documentation of test results, and formal certification to confirm adherence to the specified benchmarks. All testing must be conducted by accredited and qualified third-party entities with expertise in protective clothing standards. This solicitation is open for response until July 31, 2026, and is classified under NAICS code 541380 for other technical and scientific consulting services. The contract is not subject to any set-aside programs and is intended for subcontractors who can deliver reliable, auditable compliance verification. While no specific point of contact or physical address is provided, the bidding process is managed through the County of Kauai’s public procurement portal, and all proposals must demonstrate technical capability, relevant experience, and a clear methodology for testing and reporting. Successful bidders will be expected to deliver timely, accurate, and government-accepted certification documentation for each uniform batch tested.

POSTED

DEADLINE

Lead Sample Analysis Services for the Department of State Health Services located in Austin, TX.The Texas Health and Human Services Commission is soliciting competitive bids for lead sample analysis services to support the Environmental Lead Investigators under the Blood Lead Surveillance program of the Department of State Health Services in Austin, Texas. This procurement, identified as solicitation number HHS0017054v2, is open to qualified vendors who can provide accurate and timely lead testing of environmental samples, with the resulting contract to be used by both HHSC and DSHS. The solicitation was posted on July 10, 2026, with responses due by July 31, 2026, at 10:30 a.m. Central Time, following a deadline for questions on July 15 and an addendum release on July 17. Interested bidders must also submit their HUB Subcontracting Plan by July 18 for courtesy review. The anticipated contract start date is September 1, 2026, and the primary point of contact for inquiries is Leticia Cortes, reachable via phone or email. The services are required to be performed in Texas, with no specified city beyond Austin, and the procurement is administered under the State and Local Government (SLED) category. There is no set-aside specified for small, minority-owned, or other classified businesses, and no NAICS code has been provided. All submissions must be made through the Texas SmartBuy electronic system, and vendors are expected to comply with all procedural requirements outlined in the solicitation documents. The contract will enable essential public health monitoring efforts by providing reliable laboratory analysis of environmental lead, thereby supporting state-wide efforts to identify and mitigate lead exposure risks.

Department of State Health Services

POSTED

DEADLINE

Water Sampling & Laboratory Testing ServicesThe contract requires the collection of water samples from both potable and non-potable sources across Ventura, California, with the exclusive purpose of conducting Legionella testing using approved culture or PCR methods at an accredited laboratory. All sample collection and testing must comply with applicable health and safety standards, ensuring accurate detection and reporting of Legionella bacteria to support public health and regulatory requirements. The work is being procured as a subcontract under the California Department of Veterans Affairs, with performance expected in Ventura and no set-aside provisions specified. The solicitation was posted on July 10, 2026, and responses are due by July 28, 2026, indicating a tight turnaround for qualified vendors. The NAICS code 541380 classifies this as environmental consulting services, implying the successful bidder must possess technical expertise in water sampling protocols and laboratory analysis. The contract does not include specific point of contact details, and the place of performance is limited to Ventura without further geographic expansion. The procurement is administered through California’s eProcurement system, emphasizing compliance with state procurement rules and timelines.

California Department of Veterans Affairs

POSTED

about 24 hours ago

DEADLINE

in 16 days

AI Contract Overview

The contract involves the provision of airworthiness and conformance certifications for supplied cylinders, requiring the issuance of recognized aviation compliance documents such as FAA Form 8130-3, EASA Form One, or TCCA Form One. These certifications must be delivered within two years of the contract award to ensure the cylinders meet international regulatory standards for use in aerospace applications. The work is classified as a subcontract under NAICS code 541380, indicating specialized engineering and technical services related to quality assurance and certification. The contract is issued by the Government of Canada under the Department of National Defence, with a response deadline of June 10, 2026, and a posted date of May 26, 2026. Performance is expected to occur within Canada, though specific location details are not provided. There is no set-aside designation, and the contract does not specify a point of contact. The requirement is focused on compliance with regulatory authorities across North America and Europe, emphasizing the need for precise, timely, and documentation-intensive certification processes to support aviation safety and operational readiness.

General Info

Provide airworthiness certification for cylinders within two years under Canada’s DND contract.

Agency

Government of Canada → Department of National DefenceView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

Canada, CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedMay 26

subcontract

Response DeadlineJun 10

Deadline has passed

Submission Closed

06/10/2026, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Department of National Defence

ContactsNo contacts available

OfficeN/A

Organization / Agency

Government of Canada → Department of National Defence

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Provision of airworthiness and conformance certifications for supplied cylinders, including issuance of FAA 8130-3, EASA Form One, or TCCA Form One within two years of contract award.