Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Quality Assurance and DCMA Compliance Support

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract supports the Defense Logistics Agency under the Department of Defense by delivering comprehensive quality assurance documentation, inspection planning, and operational support to ensure adherence to defense quality standards. The work focuses on facilitating DCMA audits and in-process inspections, requiring detailed documentation practices and proactive compliance strategies to meet federal defense requirements. The subcontractor will be responsible for aligning all quality activities with established protocols to maintain continuous regulatory readiness and operational integrity across defense supply chain operations. The NAICS code 541330 indicates the work falls within scientific and technical consulting services, underscoring the specialized expertise required for defense quality systems. The contract was posted on July 17, 2026, with performance activities tied to the broader DLA mission, though specific location details are not provided.

General Info

Provide quality assurance and inspection support for DLA defense supply chain compliance under NAICS 541330.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 17

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide QA documentation, inspection planning, and support for DCMA audits and in-process inspections to ensure compliance with defense quality standards.

Similar Contracts

Same NAICS industry code

Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide Construction Management services under an Indefinite Delivery/Indefinite Quantity contract for a range of major construction initiatives. These services will support all phases of project delivery including planning, design, construction, and closeout for various delivery methods such as Design Build, Progressive Design Build, and other alternative delivery approaches. The contractor will be responsible for ensuring that all projects align with approved schedules, budgets, and quality standards, acting as a key partner in the successful execution of the Port’s capital improvement efforts. The contract does not specify a set-aside type and is categorized under NAICS code 541330, reflecting its focus on architectural and engineering services related to construction management. Primary point of contact for inquiries is Hala Rabbo, with additional support available from Project Manager Ann Davidson. Both can be reached via phone and email provided through the Port’s official channels. The solicitation is posted as a forecast with no solicitation number assigned yet, indicating it is an upcoming opportunity for industry engagement. There is no designated place of performance specified beyond its association with the Port of Seattle, suggesting work may occur across multiple project sites within the Port’s jurisdiction. All prospective bidders should refer to the official UI link for updated details and future solicitation releases.

Construction Management

POSTED

about 5 hours ago

DEADLINE

Retro-Commissioning, TAB, Controls, and Regulatory Support IDIQThe consultant will deliver retro-commissioning, test/adjust/balance, controls, and regulatory support services across Seattle-Tacoma International Airport’s facilities and infrastructure systems, operating within a demanding 24/7/365 environment. The scope includes identifying and correcting deficiencies in mechanical, HVAC, plumbing, lighting, Direct Digital Controls, smoke control, and fire protection systems to enhance performance, energy efficiency, occupant comfort, system reliability, and longevity while ensuring compliance with safety and regulatory standards. All work will be executed through Service Directives and coordinated closely with Aviation Facilities and Infrastructure to meet defined deliverables and operational needs. The contract is structured as an IDIQ vehicle under NAICS code 541330, managed by the Port of Seattle’s Aviation Facilities and Infrastructure division. Primary point of contact is Jason Gates, with Jim Farris serving as project manager; all inquiries and coordination should be directed through the provided contact information. Work will occur at the airport and is intended to support continuous, safe, and efficient operations without disruption to daily flight activities.

Aviation Facilities & Infrastructure

POSTED

about 5 hours ago

DEADLINE

PROFESSIONAL ON-CALL AIRPORT PLANNING SERVICES FOR EAST GEORGIA REGIONAL AIRPORTThe City of Swainsboro is soliciting proposals for professional on-call airport planning services to support the Airport Capital Improvement Plan at East Georgia Regional Airport. The contract seeks a qualified aviation consulting firm to provide expert planning, design, and technical advisory services as needed over the term of the agreement, ensuring alignment with federal, state, and local aviation standards. All work will be performed in Georgia and is intended to enhance the airport’s infrastructure, operations, and long-term development goals. Proposals must be submitted by August 13, 2026, and the solicitation number is PE-66723-NONST-2026-000000019. The contracting authority is the City of Swainsboro, with Jerry Cadle of Cadle Law Firm serving as the primary point of contact for inquiries, reachable via email at Jerry@cadlelawfirm.com. This is a state and local government procurement under the SLED category, and while no specific set-aside or NAICS code is listed, the solicitation is open to qualified firms with demonstrated experience in airport planning and capital improvement projects.

City of Swainsboro

POSTED

about 22 hours ago

DEADLINE

On-Call Planning, Resilience, and Community Development ServicesThe Coastal Bend Council of Governments is seeking qualified firms and multidisciplinary consultant teams to provide on-call professional services under an Indefinite Delivery/Indefinite Quantity contract for planning, resilience, community development, housing, economic development, and infrastructure planning. These services will support a wide range of local, regional, state, and federally funded initiatives across the Coastal Bend region, beginning with the preparation of a Comprehensive Plan for the City of Refugio, Texas, with additional task orders expected to serve other municipalities, counties, special districts, and grant-driven projects as funding becomes available. The solicitation aims to establish a pool of capable providers who can deliver timely, high-quality technical assistance to regional stakeholders. Firms interested in participating must submit Statements of Qualifications by the August 31, 2026 deadline, and selections will be made based on demonstrated expertise, capacity, and relevance to the anticipated scope of work. The contract is managed by the Coastal Bend Council of Governments, based in Corpus Christi, Texas, with primary point of contact Mary Afuso and Executive Director Emily Martinez available for inquiries. There is no set-aside designation, and the contract will remain open to qualified firms nationwide, with the goal of securing one or more providers to meet ongoing and future needs across the region. All submissions and correspondence must be directed through the designated contacts listed in the solicitation.

COASTAL BEND COUNCIL OF GOVERNMENTS

POSTED

about 23 hours ago

DEADLINE

in about 1 month

Consultancy Services for Car Park and Solar Farm Integration TFACCThe Department of Correctional Services under the Government of Jamaica is seeking consultancy services to integrate a car park with a solar farm at the Tamarind Farm Adult Correctional Centre. The solicitation, identified by number 1662/267, was posted on July 24, 2026, with a response deadline of August 19, 2026, inviting qualified professionals or firms to submit proposals for comprehensive design, planning, and implementation advice regarding the co-location of parking infrastructure and renewable energy generation. The project aims to enhance sustainability and operational efficiency at the correctional facility by combining vehicle parking with photovoltaic solar energy systems, requiring expertise in civil engineering, solar energy systems, spatial planning, and government compliance standards. All work is to be performed at the Tamarind Farm site in Jamaica, with no specific set-aside provisions or NAICS code designated, and the contract is open to any eligible party meeting the technical and procedural requirements outlined in the solicitation. Proposals must be submitted through the official eProcurement portal before the deadline to be considered.

Department of Correctional Services

POSTED

about 23 hours ago

DEADLINE

PROFESSIONAL ON-CALL AIRPORT ENGINEERING, ARCHITECTURAL & CONSTRUCTION INSPECTION/ADMINISTRATION CONThe City of Swainsboro is soliciting qualified aviation consulting firms to provide on-call professional services related to the Airport Capital Improvement Plan at the East Georgia Regional Airport. The scope of work encompasses a full range of engineering, architectural, and construction inspection/administration services including project planning, geotechnical and subsurface investigations, topographic surveying, environmental assessments, preliminary and final design, bidding support, and ongoing construction oversight. The firm selected will be expected to deliver comprehensive technical expertise across all phases of airport infrastructure development, ensuring compliance with regulatory standards and efficient project execution. Responses to this solicitation must be submitted by August 13, 2026, at 5:00 PM, and the opportunity is posted under solicitation number PE-66723-NONST-2026-000000017, with a posting date of July 24, 2026. The contract is issued by the City of Swainsboro in Georgia and is intended for use by state, local, or educational entities. All inquiries and communications should be directed to Jerry Cadle at jerry@cadlelawfirm.com. The services will be performed at the East Georgia Regional Airport, and the selected vendor will be required to maintain a high standard of professionalism and technical competence in support of the airport’s long-term infrastructure goals.

City of Swainsboro

POSTED

about 23 hours ago

DEADLINE

Quality Inspection and Compliance ServicesThe contract requires third-party services to perform mechanical testing, dimensional verification, and quality assurance on U-bolt hardware to ensure adherence to implied government and industry standards before acceptance in Texas. These inspections are critical to verifying that the hardware meets required performance and safety criteria, with all work to be completed in compliance with applicable regulations without explicit written specifications. The scope is focused strictly on pre-acceptance validation to mitigate risk and ensure compatibility with state transportation infrastructure demands. Issued by the Texas Department of Transportation under NAICS code 541330, this subcontract is open for response until August 14, 2026, with a posting date of July 24, 2026. The place of performance is in Texas, though specific location details are not provided. The contract does not specify a set-aside type or point of contact, and inquiries must be directed through the public portal linked in the posting. All submissions must demonstrate capability to deliver accurate, verifiable testing results aligned with industry norms governing U-bolt reliability under load and environmental stress.

Texas Department of Transportation

POSTED

DEADLINE

Independent Quality Assurance / Owner’s Verification Firm (OVF)The contract seeks an Independent Quality Assurance / Owner’s Verification Firm to perform independent reviews and verifications of design documents, construction plans, and contractor submissions to ensure full compliance with contractual obligations and applicable regulatory standards. The firm will serve as a neutral third party tasked with validating the accuracy, completeness, and adherence of all technical and procedural elements throughout the project lifecycle, acting on behalf of the owner to mitigate risk and uphold quality expectations. This role requires deep expertise in engineering and construction standards, as well as the ability to identify discrepancies or noncompliance before they impact project delivery. The opportunity is classified as a subcontract under NAICS code 541330, which pertains to engineering services, and is issued by the Georgia office of the Department of Transportation. The solicitation was posted on July 24, 2026, with a mandatory response deadline of August 24, 2026. No specific place of performance or set-aside criteria are indicated, and while contact information is not provided in the data, interested parties must respond through the official portal linked in the solicitation. The nature of the work demands rigorous attention to detail, technical proficiency, and a proven track record in independent verification within public infrastructure projects.

Department of Transportation-2

POSTED

DEADLINE

Transportation Engineering Design ServicesThe contract seeks qualified firms to provide comprehensive civil and transportation engineering design services focused on the alignment of express lanes, modifications to interchanges, installation of signage, and geometric layout adjustments. All design work must strictly adhere to technical standards set by the Georgia Department of Transportation and the Federal Highway Administration to ensure safety, efficiency, and regulatory compliance. The scope requires detailed engineering analysis and documentation to support infrastructure improvements aimed at enhancing traffic flow and system integration within the state’s transportation network. Bidders must submit proposals by August 24, 2026, with the solicitation classified as a subcontract under NAICS code 541330 for architectural and engineering services. The contract is issued by the Georgia Department of Transportation under the agency designation Department of Transportation-2, and while specific location details are not provided, performance is expected to occur within Georgia. Interested parties can access full solicitation information through the provided state portal link, and proposals must demonstrate technical expertise, experience with state and federal transportation standards, and the ability to deliver precise, compliant engineering solutions.

Department of Transportation-2

POSTED

DEADLINE

RFQ 484-082426 GEC and OVF Services for I-75 South Express Lanes PI #0020636The Georgia Department of Transportation is soliciting proposals for General Engineering Consulting and Owner’s Verification Firm services related to the I-75 South Express Lanes project under PI number 0020636. The solicitation, identified as PE-48401-RFQ-2027-000000616, was posted on July 24, 2026, with responses due by August 24, 2026. The work will be performed entirely within the state of Georgia and encompasses technical engineering support and independent verification services to ensure compliance with project standards, safety protocols, and contractual obligations. This engagement will require qualified firms to provide expert consultation throughout the design and construction phases, including review of plans, specifications, and construction progress, as well as verification of contractor performance and adherence to state and federal regulations. The contract is open to vendors under a sole source or competitive solicitation framework with no specific set-aside designation, and all interested parties must submit proposals through the designated state procurement portal. Temekia Arnold of the Georgia Department of Transportation serves as the primary point of contact, available via phone and email for inquiries regarding technical requirements, submission guidelines, and evaluation criteria. Proposals must demonstrate relevant experience in transportation infrastructure projects, particularly with express lane systems, and a proven ability to deliver objective, real-time verification services. Contractors will be expected to maintain close coordination with state engineers and respond promptly to emerging project needs without disrupting ongoing operations.

Department of Transportation-2

POSTED

DEADLINE

Engineering & Grant Management Services for Water and Wastewater System Resiliency ProjectsThe contract seeks engineering and grant management services to enhance the resilience of water and wastewater infrastructure in Darien, Georgia, in response to the impacts of Hurricane Helene. It encompasses three key projects: upgrading the New River Road Pump Station by replacing outdated pumps, installing a reliable generator, expanding the waterproof wet well, and increasing forcemain capacity; improving the Public Works Pump Station through pump replacement, control panel upgrades, and adding a backup generator to ensure continuity during outages; and modernizing the Wastewater Treatment Plant by replacing aging equipment, adding a new headworks system for pre-treatment redundancy, repairing existing headworks, and implementing electrical improvements to reduce vulnerability to failures. These upgrades aim to strengthen system reliability, prevent service disruptions, and build long-term resilience against future extreme weather events. The solicitation, identified as PE-66435-NONST-2027-000000002, was posted by the City of Darien under the State and Local Government (SLED) category and is open for responses until August 27, 2026. Primary contact for inquiries is Amy Hitt, whose email is listed for correspondence. The work will be performed entirely within Georgia, with no specific city or ZIP code provided in the address details. The goal is to secure expert support for technical design, grant compliance, and project management to ensure efficient use of funds and successful implementation of infrastructure improvements critical to public health and environmental protection.

POSTED

DEADLINE

in about 1 month

Request for Proposal –Potash Bay Culvert, Tributary Floodplain, Shoreline Restoration and Wood Additions - Preliminary DThe Vermont Association of Conservation Districts is soliciting proposals for engineering services related to the Preliminary Design phase of a floodplain and stream restoration project situated along Potash Bay in Addison, Vermont. The work encompasses an existing conditions analysis, conceptual design plans, and a 30 percent preliminary design for two subprojects including culvert replacement, tributary floodplain restoration, shoreline stabilization, and the addition of woody debris to enhance habitat function. The project aims to improve hydrological flows, restore natural stream processes, and increase ecological resilience in a sensitive riparian area. All deliverables must align with the project development report and support future permitting and construction phases. Proposals are due by August 7, 2026, at 9:00 a.m., with the solicitation posted on July 24, 2026, under solicitation number 73982. The request is issued by the Vermont Department of Economic Development through the Vermont Association of Conservation Districts, with Rory Malone serving as the point of contact for inquiries. The work will be performed on-site in Addison, Vermont, and no set-aside provisions are specified. Interested firms must submit responses through the Vermont Business Registry portal using the provided link, ensuring compliance with all technical and procedural requirements outlined in the RFP.

Department of Economic Development

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

ITAR Compliance and Technical Data ManagementThe contract requires comprehensive management of ITAR-controlled technical data, ensuring strict adherence to U.S. export control regulations and seamless coordination with the Directorate of Defense Trade Controls and the Joint Certification Program. The contractor will be responsible for implementing and maintaining compliance protocols to safeguard sensitive defense-related information, handling all aspects of documentation, access controls, and reporting procedures mandated by ITAR. This includes establishing internal processes to monitor, classify, and transfer technical data while ensuring all personnel and partners follow export compliance standards and engage effectively with DDTC and JCP requirements. As a subcontract under the Department of Defense through the Defense Logistics Agency, the engagement demands a high level of operational precision and regulatory expertise, particularly in navigating the complex landscape of international defense trade controls. The work is governed by NAICS code 541611, indicating a focus on management consulting services related to administrative and general management. The response deadline is August 3, 2026, and performance may occur at any location as no specific place of performance is defined, allowing flexibility for remote or distributed operations as long as compliance obligations are fully met without compromise.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Secure Military Packaging and MarkingThe contract titled Secure Military Packaging and Marking requires full compliance with MIL-STD-2073-IE and RP001 standards for the packaging, preservation, labeling, and marking of military equipment and supplies. This includes accurate barcoding, application of special marking codes, and adherence to strict preservation techniques to ensure product integrity during storage and transit. All packaging and labeling must meet Department of Defense specifications to support reliable identification, handling, and logistics operations across the supply chain. The work is classified as a subcontract under NAICS code 561910 and is being managed by the Defense Logistics Agency under the Department of Defense. Responses are due by August 3, 2026, with the solicitation posted on July 24, 2026, and performance locations are not specified beyond the overarching jurisdiction of the agency.

Packaging and Labeling Services

POSTED

DEADLINE

Product Verification and First Article TestingThe contract requires the contractor to perform First Article Testing (FAT) and support Product Verification Testing (PVT) for defense-related products, encompassing both destructive and non-destructive evaluation methods to ensure compliance with technical specifications and quality standards. Testing activities are critical to validating design and manufacturing processes prior to production scale-up, with results directly influencing acceptance decisions for defense systems. The work is classified as a subcontract under NAICS code 541380, indicating it falls within engineering services, and is managed by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on July 24, 2026, with responses due by August 3, 2026, and performance is expected to occur at an unspecified location under the agency’s jurisdiction. No set-aside preferences or specific geographic requirements are indicated, and the contract is accessible through the DIBBS portal for eligible subcontractors to respond.

Testing Laboratories and Services

POSTED

DEADLINE

Qualified Supplier of Bipod Raw Materials and ComponentsThe contract seeks qualified suppliers to provide defense-qualified raw materials and subcomponents, including steel forgings, pins, and springs, exclusively from sources listed on the Qualified Products List or Qualified Manufacturer List. These materials must meet stringent military standards for use in defense applications, ensuring reliability, durability, and compliance with defense specifications. The opportunity is structured as a subcontract under NAICS code 331110, indicating primary focus on iron and steel mills and ferroalloy manufacturing, and is managed by the Defense Logistics Agency under the Department of Defense. Interested parties must respond by the deadline of August 3, 2026, with proposals demonstrating proven ability to supply certified materials from authorized sources. The contract does not specify a set-aside category, meaning it is open to all eligible contractors regardless of business size or demographic designation. Performance location details are not provided, implying nationwide or global delivery capability subject to defense transport and security requirements. All submissions must align with the Defense Logistics Agency’s procurement guidelines, and interested suppliers should reference the official DIBBS portal link for detailed solicitation terms and submission instructions.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

DEADLINE

Phosphate Coating and Surface TreatmentThe contract pertains to the application of phosphate coating in accordance with specification RQ036, encompassing all stages from surface pre-treatment through coating application to final post-inspection verification ensuring full compliance with required standards. The work must be performed to meet stringent technical and quality benchmarks, with attention to consistency, durability, and adhesion of the phosphate layer to meet defense-grade requirements. This subcontract, issued by the Defense Logistics Agency under the Department of Defense, is classified under NAICS code 332812 and was posted on July 24, 2026, with a mandatory response deadline of August 3, 2026. Performance location details are unspecified, but the work is intended to support military or defense-related applications. Interested parties must submit proposals before the deadline to be considered, and all deliverables must align precisely with the technical specifications outlined in RQ036 to ensure acceptance and compliance.

Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

POSTED

DEADLINE

Precision Machining of Bipod Leg AssemblyThe contract specifies the precision CNC machining, milling, and finishing of the left-hand machine gun bipod leg in strict accordance with military drawings and technical specifications. The work requires high-accuracy manufacturing processes to meet stringent defense standards, ensuring dimensional integrity, material consistency, and surface finish quality critical for operational reliability in field conditions. All components must be produced using approved methods and materials, with full compliance to government-mandated quality control protocols. Submitted by a subcontractor, the contract is issued under the Defense Logistics Agency within the Department of Defense and classified under NAICS code 332710 for metal forging and stamping. The opportunity was posted on July 24, 2026, with responses due by August 3, 2026, indicating a limited window for qualified vendors to bid. Performance location details are not specified, but execution must align with defense logistics requirements, and the work will support a critical small arm component in a military platform. All submissions must adhere to military-grade tolerances and documentation standards to qualify for award.

POSTED

DEADLINE

Specialized Electronics Testing and Verification (PVT)The contract entails specialized product verification testing for electromagnetic relays to ensure full compliance with military environmental and electrical performance standards. This work is performed under a subcontract arrangement designated under NAICS code 541380 and is managed by the Defense Logistics Agency under the Department of Defense. The testing process is critical for validating the reliability and functionality of relays under extreme operational conditions mandated by defense specifications. The contract was posted on July 24, 2026, and is officially linked to the award record SPE7M226P3364, though specific performance location and point of contact details are not provided. The scope is focused exclusively on technical verification activities and does not include manufacturing, procurement, or general logistics support.

Testing Laboratories and Services

POSTED

DEADLINE

Cybersecurity Compliance and CUI Safeguarding SupportThis contract entails the implementation and assessment of cybersecurity controls aligned with NIST Special Publication 800-171 and the Defense Federal Acquisition Regulation Supplement clause 252.204-7012 to ensure the protection of covered defense information throughout contract performance. The work requires a thorough alignment of organizational policies, technical safeguards, and procedural controls to meet federal standards for safeguarding controlled unclassified information. All activities must be conducted with strict adherence to the requirements designed to prevent unauthorized access, disclosure, or compromise of sensitive defense data during execution of subcontracted services. The contract is classified as a subcontract under the North American Industry Classification System code 541512, indicating it involves computer systems design and related services. It is managed by the Defense Logistics Agency within the Department of Defense and is intended to support operational cybersecurity resilience across the defense supply chain. The place of performance and specific location details are not enumerated, but the work is expected to be carried out in alignment with federal cybersecurity mandates regardless of geographic location. Compliance will be continuously monitored and assessed to maintain the integrity and confidentiality of covered defense information.

Computer Systems Design Services

POSTED

DEADLINE

Defense-Compliant Packaging and Labeling ServicesThe contract requires the packaging, marking, and labeling of relays to fully comply with MIL-STD-2073-1E and MIL-STD-129 standards for military shipment and storage. This ensures that all packaging methods, external markings, and labeling requirements meet rigorous Department of Defense specifications for durability, identification, and logistical handling during transport and warehousing. The work is performed under a subcontract, with the Defense Logistics Agency as the overseeing agency under the Department of Defense. The North American Industry Classification System code 488999 indicates specialized support activities for transportation, underscoring the logistical nature of the services. The contract was posted on July 24, 2026, and the place of performance is not specified, suggesting the work may be performed at various contractor facilities as long as compliance is maintained. Full adherence to the military standards is mandatory for acceptance and delivery.

All Other Support Activities for Transportation

POSTED

DEADLINE

Qualified Manufacturer of Electromagnetic RelaysThe contract awards the manufacture and supply of eight electromagnetic relays designated by NSN 5945-01-062-5154, each required to meet the stringent military specifications MIL-R-5757/1K and MIL-DTL-5757N Sup 1, ensuring reliability and performance under demanding operational conditions. The relays must be pre-qualified under the Qualified Products List and Qualified Manufacturer List standards, confirming the manufacturer’s proven ability to consistently produce components that satisfy defense-grade quality and durability requirements. This is a subcontract issued by the Defense Logistics Agency under the Department of Defense, classified under NAICS code 334310 for electronic component manufacturing, with the solicitation posted on July 24, 2026, and performance duties tied to the broader defense supply chain without a specified geographic location for delivery.

Audio and Video Equipment Manufacturing

POSTED

DEADLINE

Packaging and Marking ServicesThe contract specifies the proper packaging, palletization, and marking of shipments containing sealing compound in full compliance with military logistics standards. All activities must adhere to stringent defense department requirements to ensure safe handling, transportation, and inventory management across military supply chains. The work is classified as a subcontract under the NAICS code 493190, indicating it pertains to other transportation and support activities related to freight. The contract is managed by the Defense Logistics Agency under the Department of Defense, with performance expected to meet operational readiness criteria without geographic restriction specified. The solicitation was posted on July 24, 2026, and the award details are accessible through the DIBBS system using the contract number SPE8ES26P1049.

Other Warehousing and Storage

POSTED

DEADLINE

Radioactive Materials Notification (If Applicable)The contract pertains to the provision of radiological testing services to determine whether a sealing compound exceeds regulatory thresholds for radioactivity. If testing reveals levels above permissible limits, the contractor is required to issue a formal notification to the appropriate authorities. This work falls under the NAICS code 541380, which covers other scientific and technical consulting services, and is issued as a subcontract by the Defense Logistics Agency under the Department of Defense. The requirement is triggered only if radioactive materials are suspected or detected, making it a conditional but critical compliance obligation. Performance is expected to align with federal regulations governingradiological safety, though the specific location of performance is not detailed. The contract was posted on July 24, 2026, and is accessible through the DIBBS system under contract number SPE8ES26P1049.

Testing Laboratories and Services

POSTED

DEADLINE