Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Quality Assurance and Inspection Services

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to comprehensive quality assurance and inspection services under the Defense Logistics Agency, a component of the Department of Defense, with a NAICS code of 541330 for scientific and technical consulting services. The work involves third-party inspection and testing rigorously aligned with MIL-STD-1916 and ASQ Z1.4 standards, utilizing AQL sampling methodologies to evaluate product quality. Critical defects are held to an acceptable quality level of 0.1, major defects to 1.0, and minor defects to 4.0, ensuring stringent control over product conformance and reliability. The contract is structured as a subcontract and was posted on July 17, 2026, with performance expected to occur under the broader scope of DLA operations, though no specific location details are provided. The solicitation number is not listed, and no point of contact information is included.

General Info

Quality assurance services under DLA using MIL-STD-1916 and ASQ Z1.4 with AQL limits for defect control.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 17

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Third-party inspection and quality assurance testing per MIL-STD-1916 and ASQ Z1.4, including AQL sampling (0.1 critical, 1.0 major, 4.0 minor defects).

Similar Contracts

Same NAICS industry code

Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide Construction Management services under an Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract to support major construction projects across various phases including planning, design, construction, and closeout. These services will encompass a range of delivery methods such as Design Build, Progressive Design Build, and other alternative project delivery formats, with the primary goal of ensuring projects adhere to authorized schedules, budgets, and quality standards. The contract is intended to streamline oversight and coordination for the Port’s extensive capital improvement initiatives, requiring technical expertise in managing complex infrastructure developments. Primary point of contact for this opportunity is Hala Rabbo, who can be reached via email or phone, with additional support available from Project Manager Ann Davidson. The solicitation is classified under NAICS code 541330, which designates architectural, engineering, and related services. Although the contract is currently posted as a forecast with no official solicitation number or set-aside details, interested parties are encouraged to monitor the provided UI link for updates and future formal solicitations. The performance location will be at various Port of Seattle facilities and project sites, with no specific city or state specified in the metadata, indicating broad geographic scope across Port operations.

Construction Management

POSTED

about 4 hours ago

DEADLINE

Retro-Commissioning, TAB, Controls, and Regulatory Support IDIQThe consultant will deliver retro-commissioning, test/adjust/balance, controls, and regulatory support services across Seattle-Tacoma International Airport’s facilities and infrastructure systems, ensuring optimal performance in a continuous 24/7/365 operational environment. The scope includes identifying and correcting deficiencies in mechanical, HVAC, plumbing, lighting, Direct Digital Controls, smoke control, and fire protection systems to enhance efficiency, comfort, reliability, and lifespan while maintaining compliance with safety and regulatory standards. Services are delivered through Service Directives and require close collaboration with Aviation Facilities and Infrastructure to meet project deliverables. Work will be managed under an Indefinite-Delivery/Indefinite-Quantity contract, with the Port of Seattle’s Aviation Facilities and Infrastructure team as the primary point of contact. The procurement is classified under NAICS code 541330, reflecting professional, scientific, and technical services related to engineering. Key contacts include Jason Gates as the primary point of contact and Jim Farris as the project manager, both reachable through the Port of Seattle’s official communications. The solicitation was posted on July 31, 2026, with performance expected to occur at the airport location, though specific geographic details are not defined in the provided data.

Aviation Facilities & Infrastructure

POSTED

about 4 hours ago

DEADLINE

Investment and Revitalization Strategy for Sacramento County Commercial Corridors

Solicitation # 2026-GEN-0073

Sacramento County is seeking to develop a comprehensive Investment and Revitalization Strategy for its 15 commercial corridors in the unincorporated areas, aiming to address longstanding challenges such as aging infrastructure, underutilized properties, fragmented ownership, and declining private investment. With a population of approximately 1.6 million and a diverse economy anchored by government, healthcare, logistics, education, and emerging sectors like clean technology and life sciences, the County has identified these commercial corridors as vital to economic vitality, community resilience, and long-term fiscal sustainability. Previous planning efforts—including market analyses and strategic reports from 2017 through 2024—have underscored the need for place-based, implementation-focused interventions that integrate housing, retail, public space improvements, and business support to attract private capital and revitalize underperforming districts. This initiative builds on those foundations to create an actionable roadmap that prioritizes opportunities, evaluates barriers, and aligns public resources to maximize impact across varied market conditions. The County is soliciting proposals through solicitation number 2026-GEN-0073, with responses due by September 5, 2026, and the work will be led by the Office of Economic Development based in Sacramento. The selected contractor will be tasked with delivering a practical, data-informed strategy that identifies realistic redevelopment opportunities, outlines prioritized actions for County intervention, and provides a clear framework for leveraging both public and private investment. Emphasis will be placed on strategies that enhance neighborhood-serving businesses, improve the physical environment, expand housing options, and foster equitable economic growth. The project will rely on existing background materials, including market studies and corridor maps, and is designed to ensure that revitalization efforts are tailored to the unique context of each corridor while contributing to broader regional goals. The final strategy must be executable, measurable, and designed to support sustainable fiscal outcomes for the County’s unincorporated communities.

Office of Economic Development

POSTED

about 10 hours ago

DEADLINE

in about 1 month

Transportation and Economic Corridors - Request for Proposal - CON0026362 - Engineering Review of the Saddle Hills County Central Peace Regional Water Project for the Ministry of Transportation and Economic Corridors

Solicitation # AB-2026-05454

Alberta Transportation and Economic Corridors is seeking qualified proponents to provide an engineering review of the Saddle Hills County Central Peace Regional Water Project. Interested parties must submit a two-part proposal consisting of a Qualification Submission and a Fee Proposal, each as a separate PDF file under 10 MB in size. Proposals must be received by August 28, 2026, at 5:30 AM Mountain Time, and no reimbursement will be provided for costs associated with preparing or submitting the proposal. The selection process will prioritize overall value to the department rather than the lowest bid, emphasizing technical capability, experience, and alignment with project requirements. All submissions should demonstrate the proponent’s ability to commit the necessary resources and meet the project schedule. The primary point of contact for inquiries is Ikhtiyar Mammadov, Manager of Engineering Services Procurement, reachable via email or phone as listed. The project is scoped for delivery within Alberta and is issued under solicitation number AB-2026-05454.

Transportation and Economic Corridors

POSTED

about 13 hours ago

DEADLINE

SB20260731 SW Bridge Structural Health Monitoring

Solicitation # RFP-125447

The Virginia Department of Transportation is soliciting expressions of interest from consulting engineering firms to deliver professional and surveying services focused on establishing baseline conditions and monitoring the physical responses of highway structures over time. This includes diagnostic assessments to evaluate structural or behavioral issues impacting the durability and performance of bridges, buildings, tunnels, traffic structures, culverts, utilities, and support systems, with potential work extending to other structure types as needed. The goal is to inform future repair or rehabilitation strategies by tracking near-term and long-term structural behavior across the Commonwealth. Services may be required at any location within Virginia, and firms must be prepared to respond to requests statewide. The contract will be structured as a cost-plus net fee arrangement with a maximum value of ten million dollars per term. All interested parties must register at www.bidexpress.com to access solicitation materials and submit their expressions of interest, with no registration fee required. Inquiries must be submitted exclusively through the Bid Express Q&A section, where all responses and updates—including addenda—will be published publicly. The deadline for submitting expressions of interest is 2:00 p.m. on August 21, 2026. VDOT affirms its commitment to compliance with Title VI nondiscrimination requirements and ensures equal opportunity in all aspects of this procurement.

Virginia Department of Transportation

POSTED

about 15 hours ago

DEADLINE

The City of Byram requests proposals from qualified firms or individuals to provide engineering services for work related to the implementation of approved FY 2026 DRA project(s). You are invited to submit a proposal, in accordance with this request, t

Solicitation # 3520-20260729123119 Byram

The City of Byram is seeking qualified firms or individuals to provide engineering services for the implementation of approved Fiscal Year 2026 Disaster Recovery Assistance projects. Proposals must be submitted in response to solicitation number 3520-20260729123119 Byram, with a deadline for submission set for August 20, 2026, at 6:00 PM. The work is tied to state-funded recovery initiatives managed under the Mississippi Public Transportation and Assistance Program and will be performed within the state of Mississippi. Submission guidelines and requirements are outlined in the public solicitation, and interested parties should review the official posting on the Mississippi Department of Finance and Administration website for full details. All proposals must demonstrate technical capability, relevant experience, and compliance with state procurement standards to be considered.

POSTED

about 15 hours ago

DEADLINE

Pre-Bid Conference: Date & Time: 8/17/2026 1:30 PM Description: A pre-bid conference for this project is scheduled for 1:30 p.m. on August 17, 2026, at the City of Gulfport Engineering Department located at 4050 Hewes Avenue, Gulfport, MS 39507. Attenda

Solicitation # 43-20260728091408 Gulfport

A pre-bid conference for the solicitation is set for 1:30 p.m. on August 17, 2026, at the City of Gulfport Engineering Department located at 4050 Hewes Avenue, Gulfport, Mississippi, 39507. This meeting is mandatory for potential bidders to gain essential project insights, clarify requirements, and address any questions prior to submitting proposals. The solicitation, identified by number 43-20260728091408 Gulfport, was posted on July 31, 2026, with a firm response deadline of August 26, 2026, at 6:00 p.m. The procurement is managed by the Mississippi Department of Finance and Administration under the MPTAP program and falls under a state-level government solicitation with no set-aside designation specified. All interested parties must attend the pre-bid conference to ensure full understanding of the scope and compliance requirements before the deadline.

POSTED

about 15 hours ago

DEADLINE

Quality Assurance and Inspection Services (Sub-tier Support)The contract entails providing independent quality assurance and inspection services as a sub-tier support to ensure compliance with DLA and MIL-STD standards across multiple stages of manufacturing and delivery. Key responsibilities include conducting first article inspections to validate initial production samples, performing in-process checks to maintain consistent quality during production, and executing final acceptance testing to confirm that end products meet all technical and performance specifications. Additionally, the contractor is required to review all associated documentation for accuracy and completeness and to systematically track, report, and manage non-conformances to ensure timely resolution and prevent recurrence. The work must be executed with precision and adherence to federal defense procurement standards, ensuring that all deliverables are traceable, auditable, and fully compliant with applicable military specifications. This subcontract is issued under NAICS code 541330 and is associated with the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The solicitation was posted on July 31, 2026, with responses due by August 31, 2026. Although specific location details and point of contact information are not provided, performance is expected to align with the needs of the defense supply chain, likely involving coordination with prime contractors and defense manufacturing facilities. Participation requires demonstrated expertise in military quality systems and the ability to operate independently within a highly regulated environment, ensuring that all inspection and assurance activities support mission-critical defense outcomes.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in about 1 month

Government First Article Testing (FAT) SupportThis contract supports Government-conducted Factory Acceptance Testing for up to two units, requiring the contractor to ensure full site access, provide comprehensive documentation, and deliver test-ready units ready for evaluation. The effort is tied to the Government’s First Article Testing process and demands coordination to meet all technical and procedural requirements necessary for successful FAT execution. The work is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses as defined by the SBA are eligible to respond. The North American Industry Classification System code 541330 designates the scope as engineering services, aligning with technical support and testing services for defense-related systems. The contract was posted on July 31, 2026, with a response deadline of August 28, 2026, and is administered by the Department of Defense under the ASC SUPPLIER OPER AE AND AF DIV. The place of performance and point of contact details are not specified, indicating potential flexibility or site-specific arrangements to be determined post-award.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

Quality Assurance and Inspection ServicesThe contract seeks third-party quality assurance support to ensure full compliance with ISO 9001:2015 standards, MIL-STD-1916 sampling procedures, and zero-defect acceptance criteria specifically for government inspection readiness. The service provider will be responsible for implementing and verifying quality control processes that align with these rigorous standards to prepare for and pass formal military and government inspections. Attention must be paid to systematic documentation, traceability, and defect prevention across all stages of production or service delivery to meet the zero-defect mandate. This is a subcontract under the NAICS code 541330, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of August 31, 2026. The place of performance and specific location details are not provided, indicating flexibility in where services may be rendered as long as compliance requirements are met. Proposals must demonstrate proven experience in supporting defense-related quality systems, with clear methodologies for auditing, sampling, and defect resolution that align with federal inspection protocols. All activities must be designed to ensure uninterrupted readiness for government evaluation at any time.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in about 1 month

Wise County IDA is seeking proposals from qualified providers for A&E professional services

Solicitation # RFP-125435

The Wise County, Virginia Industrial Development Authority is soliciting proposals from qualified engineering firms to deliver professional architecture and engineering services for the JJ Kelly Site Development Project. The scope of work includes comprehensive site preparation, grading, earthwork, stormwater management, erosion and sediment control, seeding, and related activities necessary to enable future single or multi-family housing development. All services must align with local, state, and federal environmental regulations, and successful firms will be expected to handle permitting processes and ensure compliance with all applicable environmental standards throughout the project lifecycle. Proposals must be submitted by August 31, 2026, and the work will be performed exclusively within Wise County, Virginia. The solicitation, identified as RFP-125435, was posted on July 31, 2026, and is open to qualified engineering providers without specific set-aside requirements. Interested parties should direct inquiries to Brian Falin at falin_b@wisecounty.org or 276-328-2321, and submissions must be made through the official online portal accessible via the provided UI link. All proposers are expected to demonstrate relevant experience in similar industrial or residential site development projects, particularly in the Appalachian region, and must be prepared to coordinate with local authorities and stakeholders to ensure seamless project execution and environmental compliance.

POSTED

about 17 hours ago

DEADLINE

in about 1 month

On-Call Professional Engineering Services

Solicitation # RFP-125416

Pittsylvania County is seeking qualified professional engineering firms to compete for on-call contracts to provide engineering and related small architectural services. The solicitation, numbered RFP-125416, was posted on July 31, 2026, with proposals due by 7:00 PM on August 28, 2026. The effort aims to establish multiple ongoing contracts to support a variety of county projects requiring engineering expertise, without specifying a fixed scope or volume of work. Submissions must come from firms capable of delivering high-quality services across a range of infrastructure and public works needs. The work will be performed primarily at 405 R&L Smith Road in Danville, Virginia, and all responses must be submitted in sealed form by the stated deadline. The contracting authority is Pittsylvania County, Virginia, an entity within the state’s local government structure, and inquiries should be directed to Connie Gibson, the point of contact, via email at connie.gibson@pittgov.org or by phone at 434-432-7744. There is no set-aside designation specified for small or minority-owned businesses, and the procurement does not list a NAICS code. Firms interested in participating are encouraged to review the full details through the provided vendor portal link to ensure full compliance with submission requirements and evaluation criteria.

Pittsylvania County

POSTED

about 19 hours ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Solicitation # SPE8E6-26-T-3551

The contract pertains to the procurement of two ROD, WELDING units identified by NSN 3439-01-696-3835 under solicitation number SPE8E6-26-T-3551, issued by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on June 30, 2026, with a response deadline set for July 13, 2026, indicating a two-week window for potential vendors to submit bids. The requirement is classified as a federal procurement with no specific set-aside designation, and the place of performance and office address details are not provided, though the contracting entity is based in the United States. All correspondence and submissions must be coordinated through the designated DIBBS platform linked in the contract data.

Welding and Soldering Equipment Manufacturing

POSTED

about 16 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2104

The contract pertains to the procurement of 12-volt lead acid storage batteries, specifically the Power-Sonic Corporation model PG-12V35FR, with a total quantity of 90 units distributed across multiple Navy vessels. These batteries are commercial off-the-shelf items with a mandatory Type I shelf life of 12 months, non-extendable, and must be supplied with two bolts and two washers for terminal cable attachment. Strict compliance with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements is enforced, including the special marking code 32 to indicate shelf life classification. All shipments must adhere to DLA packaging and palletization rules, with hazardous materials handling governed by IP025, and mercury or mercury compounds are prohibited except where functionally necessary and explicitly authorized. Sampling and inspection follow MIL-STD-1916 or equivalent zero-based plans, with zero non-conformances required unless otherwise specified. The contract uses a firm fixed price with zero quantity variance, origin inspection and acceptance, and FOB origin terms. Delivery must occur within 60 days of award, and all items must be shipped via traceable freight using VSM, explicitly forbidding parcel post. Each shipment is directed to specific Navy vessel addresses using RDD codes, with transportation governed by DLAD procedural notes, and delivery timelines are individually assigned, ranging from March to June 2026.

Battery Manufacturing

POSTED

about 16 hours ago

DEADLINE

CRYSTAL UNIT, QUARTZ

Solicitation # SPE7M5-26-Q-0812

A crystal unit, quartz with NSN 5955-00-831-6446 is being solicited under contract number SPE7M5-26-Q-0812 by the Defense Logistics Agency on behalf of the Department of Defense. The request is for a single unit with purchase request number 7017418127, and the solicitation was posted on July 31, 2026, with a response deadline of August 7, 2026. This is a federal procurement action with no set-aside classification specified, indicating it is open to all qualified vendors. The place of performance and office address details are not provided, but the contract is managed within the U.S. federal procurement system. Interested parties must submit responses prior to the deadline via the official DIBBS platform through the provided link.

Other Electronic Component Manufacturing

POSTED

about 16 hours ago

DEADLINE

AMPLIFIER, RADIO FRE

Solicitation # SPE7M5-26-Q-0766

The Defense Logistics Agency, under the Department of Defense, has issued a solicitation for 41 units of an amplifier, radio frequency, identified by NSN 5996-01-390-3676, under purchase request 7017384568. The solicitation, numbered SPE7M5-26-Q-0766, was posted on July 31, 2026, with a response deadline of August 10, 2026. The contract is open to federal suppliers and does not specify a set-aside preference or NAICS code. Performance location and point of contact details are not provided, but the solicitation is administered through the DLA’s DIBBS platform, and all submissions must be made via the official link provided. The requirement is for a critical radio frequency component used in defense systems, and timely response is essential to meet operational needs.

Other Electronic Component Manufacturing

POSTED

about 16 hours ago

DEADLINE

POST, FENCE, METAL

Solicitation # SPE8E6-26-T-3754

The contract involves the procurement of 92 units of zinc-coated steel pipe fence posts, each measuring 4.0 inches outside diameter and 13.0 feet overall length, with a weight of 9.11 pounds per foot, intended for use as gate posts in chain link fencing systems. The product is identified by NSN 5660-01-015-9800 and must conform to Federal Specification RR-F-191K Revision K dated February 13, 2023, with all technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting provisions in other standards. Packaging must adhere to ASTM D3951 and fully comply with RP001, DLA’s Packaging Requirements for Procurement, including palletization, while labeling and marking must strictly follow MIL-STD-129, incorporating barcodes and unit of issue data as specified. The items are to be delivered FOB origin with a strict delivery window of five days to Sweihan Air Base, AE, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. The total contract value is $8,464.00 at a unit price of $92.00 per unit, with delivery required no later than July 17, 2026. All submissions must be made through the DIBBS portal by the proposal deadline, and invoicing is mandatory via Wide Area WorkFlow with electronic payment instructions governed by DFARS clauses. The contract incorporates multiple FAR and DFARS clauses related to employment equity, trafficking in persons, sustainable products, hazardous material labeling, cybersecurity, subcontracting, and maritime transport, including a strict requirement that sea shipments must use U.S.-flag vessels with 45-day advance notice for waivers. Compliance with safety data sheet requirements and hazardous material declarations is mandatory, and all subcontractors must flow down applicable clauses. Offerors must provide their Unique Entity ID and CAGE code and make accurate socioeconomic representations. Deviations from standard clauses are permitted under specific government-issued deviation numbers, and the contractor is responsible for ensuring all material, packaging, and shipping documentation meets federal and agency standards without exception.

Rolled Steel Shape Manufacturing

POSTED

about 16 hours ago

DEADLINE

POWER SUPPLY ASSEMBLY

Solicitation # SPE7L7-26-T-4377

The contract involves the procurement of a single Power Supply Assembly, identified by NSN 6130-01-476-2036, under solicitation SPE7L7-26-T-4377 issued by the Defense Logistics Agency. Delivery is required within 20 days after order placement to the destination address associated with USS PATRIOT MCM 7 at FPO AP 96675, with FOB DESTINATION terms applying. The contractor, K D K ELECTRONICS, INC., must comply with strict technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements and governed by MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, labeling, and barcoding, including UCC/ITF-14 and Data Matrix symbols. Zero tolerance is enforced for quantity variance, and all hardware must be free of intentional mercury or mercury compounds, with limited exceptions for specific functional applications compliant with NAVSEA 5100-003D. Cyberspace requirements mandate CMMC Level 2 self-assessment and full compliance with the NIST SP 800-171 DOD Assessment Requirements and DFARS 252.204-7012 for safeguarding covered defense information, alongside the Basic Safeguarding of Covered Contractor Information Systems clause. Inspection and acceptance occur at the destination, with sampling governed by MIL-STD-1916 or ASQ H1331 Table 1 using zero acceptance criteria unless otherwise specified. The contract includes clauses requiring adherence to environmental prohibitions such as the elimination of hexavalent chromium and proper handling of hazardous materials, with mandatory submission of Safety Data Sheets prior to award. Payment must be processed exclusively through WAWF using approved document types like the Invoice and Receiving Report, and the contractor must maintain an active UEI and CAGE code while certifying its small business status if applicable. All submissions must be made via DIBBS by the deadline of August 5, 2026, with no alternative submission methods permitted.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE7MC-26-T-3635

The contract pertains to the procurement of one gate valve with NSN 4820-01-465-8423 under solicitation SPE7MC-26-T-3635, issued by the Defense Logistics Agency on behalf of the Department of Defense. The item is required for delivery within five days of award, with a response deadline of August 5, 2026, and is classified under NAICS code 332911. The procurement is subject to the DLA Packaging Requirements and incorporates all technical and quality specifications referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date or award date depending on the acquisition size. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to the supplied hardware unless explicitly exempted, such as in functional batteries, fluorescent lights, designated instruments, sensors, controls, weapon systems, or specific chemical reagents authorized by NAVSEA. Any portable fluorescent lamps or portable instruments containing mercury must be shockproof and include a secondary containment barrier to prevent leakage, in compliance with NAVSEA 5100-003D. The sole point of contact for the solicitation is Tracy Smith, reachable via email and phone, with performance required at the location identified by zip code 93928-7156 in Jolon.

Industrial Valve Manufacturing

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE7MC-26-T-142D

The contract is for the procurement of one ball valve with NSN 4820015636585 under solicitation SPE7MC-26-T-142D issued by the Defense Logistics Agency. Delivery is required within 20 days of order issuance to the USS MESA VERDE LPD 19 at FPO AE 09578, with all shipments going FOB destination and no variance allowed in quantity. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA’s RP001 requirements, and all markings must include the correct Unit of Issue and Quantity per Unit Pack. The valve must not contain mercury or mercury compounds except in specific exempted uses such as functional batteries or sensors, and any portable devices containing mercury must have shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Inspection and acceptance occur at the destination, and the Government retains full authority to reject nonconforming supplies. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting commercial standards. The contract incorporates multiple Federal Acquisition Regulation clauses including 52.246-2 for inspection, 52.249-8 for default, 52.227-1 Alternates I and II for authorization and consent, and 52.222-50 and 52.222-54 for combating trafficking and employment eligibility verification, all with deviations effective in 2026. Defense-specific clauses under DFARS include 252.240-7997 for NIST 800-171 compliance, 252.232-7010 for levies on payments, 252.246-7003 for safety issue notifications, and 252.223-7001 for hazardous material labeling. Invoicing must be processed exclusively through Wide Area WorkFlow, and payment routing relies on DoDAACs not detailed in the solicitation. Offerors must provide a Unique Entity ID and CAGE code, and may claim small business or socioeconomic status benefits including HUBZone, 8(a), WOSB, or SDVOSB, with automated award preferences applied. Compliance with safeguarding contractor information systems

Industrial Valve Manufacturing

POSTED

about 16 hours ago

DEADLINE

TOOL, PULLING, MALE, DIVI

Solicitation # SPE8E6-26-Q-0607

The contract is for a single unit of a pulling male diving tool designated under the NSN 4220-01-130-5526, part of the MK 12 Diving System, with a delivery requirement of 60 days after delivery order. The solicitation number is SPE8E6-26-Q-0607, issued by the Defense Logistics Agency under the Department of Defense, with a response deadline of August 10, 2026. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date based on acquisition scale. Packaging must comply with DLA standards, and the item has no shelf life. The technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting unauthorized disclosure or export to foreign persons, including foreign nationals within the United States. Access to this controlled data is restricted to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, submitted the DLA Export-Controlled Technical Data Questionnaire, and received formal approval from the DLA controlling authority. DFARS 252.225-7048 governs the handling of this controlled technical data, and government identification must be removed from non-accepted supplies. The point of contact for this solicitation is Jasmine Jiles, with primary communication via email and phone.

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE8E8-26-T-4762

The contract pertains to the procurement of one marine toilet, identified by NSN 4510016022193 and manufactured by Dometic Corporation under part number 301197506, with three identical line items totaling three units to be delivered. All items are subject to a strict five-day delivery window from award, with FOB Origin terms meaning title transfers at the supplier’s location, and final acceptance occurring upon delivery to the designated Virginia Beach facility. Packaging must comply with ASTM D3951 but is overridden by the DLA Master List of Technical and Quality Requirements, which takes absolute precedence; palletization must follow RP001, and all items must be marked and labeled per MIL-STD-129 with proper NSN, lot number, and machine-readable barcoding. Parcel post is strictly prohibited, and shipments must be sent via the fastest traceable means with RDD 777 designation. The solicitation, identified as SPE8E8-26-T-4762, has a response deadline of August 5, 2026, and requires electronic submission through DIBBS. Pricing is not specified in the document, indicating a blank solicitation for offeror responses, with no total contract value stated. Compliance with extensive FAR and DFARS clauses is mandatory, including cybersecurity safeguards under 252.204-7012, safeguarding covered defense information, combating human trafficking, employment eligibility verification, sustainable product use, hazardous materials identification, and whistleblower protections. Offerors must hold a current UEI and CAGE code and disclose socioeconomic status, including small business or veteran-owned certifications if applicable. Any use of covered defense telecommunications equipment triggers additional disclosures. Inspection and acceptance occur at the destination, and invoice submission must be electronic through WAWF. The contract requires adherence to strict documentation protocols, including the use of standardized reporting formats and compliance with all DLA packaging, marking, and transportation directives.

Plastics Plumbing Fixture Manufacturing

POSTED

about 16 hours ago

DEADLINE

PLATE METAL 4 X 48 X 4

Solicitation # SPEFA5-26-Q-0067

The contract specifies the procurement of plate metal in accordance with MMS-1420, equivalent to AMS4050 Rev K, made from 7050-T7451 aluminum alloy with dimensions of 4 inches by 48 inches by 48 inches. A total of 48 pieces are required under solicitation SPEFA5-26-Q-0067, with a firm fixed price and zero tolerance for quantity variance. All materials must be packed in compliance with ASTM D3951 and labeled per MIL-STD-129, with palletization following DLA packaging requirements, and shipped by the fastest traceable means—parcel post is prohibited. The delivery destination is Fleet Readiness Center East at Cherry Point, North Carolina, with an acceptance point at destination and a 30-day delivery window from award. A Certificate of Quality Conformance is mandatory, and metal certification data must comply with applicable CDRLs and the DLA Master List of Technical and Quality Requirements, which supersede all other standards. Sampling must meet MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and inspection is performed upon arrival. The item has no shelf life and is identified by NSN 9535-LL-NCA-3083 with a required delivery date of July 23, 2026.

Aluminum Sheet, Plate, and Foil Manufacturing

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE8E6-26-Q-0606

This contract pertains to the procurement of four Diver’s Knives with NSN 4220-00-372-0665 under solicitation SPE8E6-26-Q-0606, issued by the Defense Logistics Agency. The item must be manufactured in strict accordance with drawing 921557 and associated technical documentation, including qualified assurance provisions and updated revisions as referenced. Material specifications cited in the original drawing, such as MIL-B-16541 and MIL-I-763, are obsolete; acceptable alternatives include any current bronze specification equal to or better than Grade A bronze and any varnished maple hardwood. Production may require casting or forging, and the government does not provide associated tooling, necessitating contractors to submit a Casting and Forging Assistance Request for support. Inspection and acceptance occur at destination, with firm fixed pricing and zero variance allowed in quantity. Packaging must comply with MIL-STD-2073-1E and MIL-B-117 standards, with marking per MIL-STD-129 and no special markings required. Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. Tolerances for machined and casting dimensions are defined by strict dimensional allowances based on size ranges, with angular tolerances set at ±0°30′. The supply is subject to full and open competition, with no restrictions on bidder eligibility. Mercury or mercury-containing compounds are prohibited in or on the item except for specific functional uses such as batteries, instruments, or sensors as outlined in NAVSEA 5100-003D, with additional containment requirements for portable devices. The contract incorporates all applicable technical and quality requirements from the DLA Master List of Requirements, referenced by R or I numbers, with revisions governed by the solicitation or award date depending on acquisition size. Delivery is required within 60 days after award, with FOB origin terms and transportation details directed to the Commander, SRF-JRMC Yokosuka Naval Base in Japan. The unit of issue is each, with pricing and order quantity fixed at four units. The contract includes provisions for the removal of government identification from non-accepted supplies and affirms that covered defense information may apply. The item is procured to support a specific government

Metal Kitchen Cookware, Utensil, Cutlery, and Flatware (except Precious) Manufacturing

POSTED

about 16 hours ago

DEADLINE