Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Quality Assurance and Inspection Services

Active

Federal

Response Deadline07/27/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks Quality Assurance and Inspection Services for aluminum sheets to ensure full compliance with specified material standards, including accurate alloy and temper identification, verified heat and lot traceability, and correct labeling and marking as required. All inspections must be conducted with precision to confirm that delivered materials meet contractual and technical specifications before acceptance, with documentation supporting each verification step to maintain traceability and accountability throughout the supply chain. This is a Total Small Business Set-Aside under the SBA program, designated under NAICS code 541330 for Architectural and Engineering Activities, and is issued by the Department of Defense through the Construction & Equipment MRO SVC I organization. The solicitation was posted on July 20, 2026, and responses are due by July 27, 2026, with performance expected to be carried out under the terms of a subcontract. Interested small businesses must submit proposals by the deadline to compete for this opportunity, which emphasizes rigorous adherence to quality control protocols and the ability to provide certified documentation of material compliance.

General Info

Small business set-aside for aluminum sheet QA and inspection with certified traceability and labeling compliance.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC IView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 20

subcontract

Response DeadlineJul 27

Submission deadline

Response Deadline

07/27/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Inspection and verification of aluminum sheets for material compliance, alloy/temper accuracy, heat/lot traceability, and proper marking.

Similar Contracts

Same NAICS industry code

Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide Construction Management services through an indefinite-delivery, indefinite-quantity contract for major construction projects across various phases including planning, design, construction, and closeout. The scope encompasses support for multiple delivery methods such as Design Build, Progressive Design Build, and other alternative delivery approaches, with an emphasis on ensuring projects adhere to approved schedules, budgets, and quality standards. This contract will serve as a vehicle for procuring CM services on an as-needed basis to support the Port’s evolving infrastructure initiatives. The contract is categorized under NAICS code 541330 for Architectural, Engineering, and Related Services and is managed by the Port of Seattle’s Construction Management office. Primary point of contact for inquiries is Hala Rabbo, with additional support available through Project Manager Ann Davidson. The solicitation was posted on July 21, 2026, and interested parties can access further details via the Port’s official portal. There is no set-aside classification indicated, and performance is expected to occur at various locations under the Port’s jurisdiction.

Construction Management

POSTED

about 4 hours ago

DEADLINE

Retro-Commissioning, TAB, Controls, and Regulatory Support IDIQThe consultant will deliver retro-commissioning, test/adjust/balance, controls, and regulatory support services across Seattle-Tacoma International Airport’s facilities and infrastructure systems, operating within a 24/7/365 environment that demands continuous reliability and safety. The work centers on identifying and correcting deficiencies in mechanical, HVAC, plumbing, lighting, Direct Digital Controls, smoke control, and fire protection systems to enhance performance, energy efficiency, occupant comfort, system longevity, and compliance with applicable regulations. All services will be executed through Service Directives and require close collaboration with Aviation Facilities and Infrastructure to meet defined deliverables and operational standards. The contract is structured as an Indefinite-Delivery/Indefinite-Quantity agreement under NAICS code 541330, managed by the Port of Seattle’s Aviation Facilities & Infrastructure division. Primary point of contact is Jason Gates, with Jim Farris serving as Project Manager; inquiries and communications should be directed through their provided contacts. The solicitation was posted on July 21, 2026, with performance expected to take place at the airport. There is no specified set-aside type, and the contract is designed to support ongoing and evolving needs across the airport’s critical infrastructure systems.

Aviation Facilities & Infrastructure

POSTED

about 4 hours ago

DEADLINE

IFB 26-00409, Veeder Root System Upgrade ProjectHampton Roads Transit is soliciting bids for the procurement and installation of Veeder-Root TLS450 Plus fuel and lubricant monitoring systems across its facilities in Hampton Roads, Virginia. The project requires qualified contractors to furnish, install, configure, test, and commission the systems to ensure accurate tracking and management of fuel and lubricant usage. The solicitation, identified as IFB-124728 under the title IFB 26-00409, was posted on July 20, 2026, and bids must be submitted by August 20, 2026, at 7:00 PM EST. The work is to be performed entirely within the Hampton Roads region, and all responses must be submitted through the designated online vendor portal. Interested parties should direct inquiries to Fevrier Valmond, the designated point of contact, via email at fvalmond@hrtransit.org or phone at 757-222-6000.

Hampton Roads Transit

POSTED

about 11 hours ago

DEADLINE

in about 1 month

Quality Inspection & Compliance MonitoringThe contract pertains to third-party inspection services aimed at verifying the quality and compliance of crack sealing operations on transportation infrastructure, with specific focus on depth, width, and adhesion properties. The inspections must align with technical standards set by the Texas Department of Transportation and AASHTO, ensuring that all work meets rigorous performance and durability requirements. Comprehensive documentation and detailed reporting are required as part of the quality assurance process to validate compliance and facilitate ongoing maintenance oversight. This subcontract is issued by the Texas Department of Transportation under NAICS code 541330, which categorizes it under architectural, engineering, and related services. The solicitation was posted on July 20, 2026, with a response deadline of August 11, 2026, and is accessible via the Texas SmartBuy portal. Performance of the work is expected to occur across Texas state-maintained roadways, though specific locations are not detailed. The contract emphasizes objective evaluation and transparent reporting to support state-level infrastructure integrity and regulatory compliance.

Texas Department of Transportation

POSTED

about 12 hours ago

DEADLINE

Roadway Inspection and Quality AssuranceThe contract titled Roadway Inspection and Quality Assurance requires the performance of inspections to ensure that all maintenance operations on Texas roadways meet the technical and safety standards established by the Texas Department of Transportation. These inspections focus on verifying surface quality, the appropriateness and condition of materials used, and adherence to safety protocols during execution of work. The effort is critical to maintaining infrastructure integrity and public safety across the state’s transportation network. The contract is structured as a subcontract and falls under NAICS code 541330, indicating it involves architectural, engineering, and related services. The solicitation was posted on July 20, 2026, with a response deadline of August 12, 2026, at 4:00 PM Central Time. All performance is expected to occur within Texas, though specific cities or locations are not detailed in the provided information. The contract is managed by the Texas Department of Transportation under its Texas organizational unit, with no set-aside provisions identified. Interested parties must submit responses through the designated portal at the provided Texas SmartBuy link, and all qualified subcontractors are expected to comply fully with TxDOT’s regulatory and operational guidelines throughout the inspection process.

Texas Department of Transportation

POSTED

about 13 hours ago

DEADLINE

Inspection and Quality Assurance SupportThe contract involves providing on-site inspection and quality assurance support for infrastructure projects under the Texas Department of Transportation, focusing on verifying work quality, documenting completed tasks, and assisting the prime contractor during TxDOT acceptance inspections. This subcontract requires personnel to be physically present at project sites to ensure compliance with technical standards, maintain accurate records of construction progress, and serve as a liaison during official inspections to facilitate smooth acceptance processes. The opportunity is open for submissions until August 12, 2026, and is classified under NAICS code 541330, which pertains to engineering services. It is positioned as a subcontract and does not specify any set-aside status or organizational type restrictions. The place of performance is unspecified in the posted data but will be tied to active TxDOT projects across the state. Interested parties must access the full solicitation through the provided Texas SmartBuy portal link to understand scope expectations, deliverables, and contract terms.

Texas Department of Transportation

POSTED

about 13 hours ago

DEADLINE

Inspection and Quality Control SupportThis contract seeks support for inspection and quality control activities related to field verification of material placement, compaction, and grading on transportation projects to ensure full compliance with Texas Department of Transportation standards. The work involves on-site monitoring and documentation to verify that construction practices meet engineered specifications and regulatory requirements, with a primary focus on ensuring structural integrity and long-term performance of roadways and related infrastructure. All tasks must be performed in alignment with TxDOT protocols and may include testing, reporting, and coordination with project teams to resolve non-conformances in a timely manner. The opportunity is structured as a subcontract under NAICS code 541330, indicating it relates to engineering services, and is posted on the Texas SmartBuy portal with a response deadline of August 12, 2026. While the solicitation number is not provided, the contract is managed by the Texas Department of Transportation and will be performed somewhere within the state of Texas without a specified city or zip code. The scope does not indicate any set-aside classifications, and there is no designated point of contact listed, suggesting that all inquiries should be directed through the provided portal link. Interested parties must submit their proposals before the deadline to be considered for award.

Texas Department of Transportation

POSTED

about 13 hours ago

DEADLINE

Electrical Engineering Design Services for Parks InfrastructureThe City of Issaquah is seeking qualified firms to provide professional electrical engineering design services for public park infrastructure, focusing on lighting, power distribution, and control systems. The scope requires full compliance with Washington State electrical codes and standards, and all deliverables must be stamped by a licensed Professional Engineer (PE) to ensure regulatory adherence and public safety. This subcontract opportunity is open to firms capable of delivering detailed, code-compliant designs that support the city’s infrastructure improvements, with a strong emphasis on reliability, energy efficiency, and long-term maintainability of park systems. The solicitation was posted on July 20, 2026, and responses are due by August 14, 2026, at 11:00 PM Eastern Time. The NAICS code 541330 identifies this as engineering services, specifically electrical engineering, and the contract is classified as a subcontract under the city’s broader public works initiative. While no set-aside type is specified, applicants must be prepared to meet all applicable state and local requirements for public infrastructure projects. Proposals should demonstrate prior experience with municipal park projects, familiarity with Washington State regulatory frameworks, and the ability to coordinate with other design and construction teams to ensure seamless integration of electrical systems into park environments.

City of Issaquah

POSTED

about 13 hours ago

DEADLINE

RFQ PARKS- On-Call Electrical Engineering Consultants for Parks & Recreation ProjectsThe City of Issaquah’s Parks and Community Services Department is soliciting qualified electrical engineering consultants on an on-call basis to support a variety of electrical engineering needs for parks and recreation projects. These services may range from supporting larger capital improvements to addressing one-time or urgent engineering requirements, with work being issued through individual task orders that align with the format outlined in Professional Services Agreement—Attachment C. The City plans to select up to two firms to ensure broad expertise and flexibility in addressing diverse project demands, though no minimum volume of work is guaranteed and the timing and extent of assignments will vary significantly. Interested firms must respond by the deadline of August 14, 2026, with all submissions directed to the designated point of contact, Robin Spear, at the City of Issaquah. The solicitation is open to qualified electrical engineering consultants capable of delivering professional services within Washington State, particularly in support of municipal parks and recreation infrastructure. There is no set-aside designation specified, and while no guaranteed work volume exists, selected firms will be contacted as needs arise, with each task order independently authorized and managed. Proposals should demonstrate relevant experience, capacity, and ability to meet the City’s technical and operational expectations across a range of electrical engineering applications.

City of Issaquah

POSTED

about 13 hours ago

DEADLINE

Geotechnical Report Writing & Peer ReviewThe contract entails the preparation and peer review of comprehensive geotechnical reports for municipal projects undertaken by the City of Issaquah in Washington. The work requires detailed analysis and documentation of site conditions, design parameters, and engineering recommendations to support infrastructure development, with an emphasis on accuracy, thoroughness, and compliance with industry standards. Subcontractors must demonstrate expertise in geotechnical engineering practices and the ability to deliver technically sound reports that inform project design and safety decisions. The opportunity is posted as a subcontract with a NAICS code of 541330, indicating it falls under engineering services, and is open for response until August 14, 2026. While no set-aside provisions or specific organizational requirements are specified, bidders are expected to have the qualifications and experience necessary to handle complex geotechnical evaluations for public infrastructure. The place of performance and point of contact details are not provided, but all work is related to municipal projects within Issaquah, Washington, and proposals must be submitted via the designated public procurement portal by the stated deadline.

City of Issaquah

POSTED

about 16 hours ago

DEADLINE

Earth Retaining Structure DesignThe City of Issaquah is seeking a subcontractor to design earth retaining structures including retaining walls, soil nail walls, and reinforced soil slopes to support park grading, trail access, and erosion control efforts in hilly terrain. The work must address complex geotechnical challenges inherent to steep landscapes, ensuring structural stability, long-term durability, and environmental compatibility. The design scope requires engineering solutions that integrate with natural topography while meeting safety and regulatory standards for public infrastructure. The solicitation was posted on July 20, 2026, with responses due by August 14, 2026, under NAICS code 541330 for engineering services. This is a subcontract opportunity, indicating the selected firm will work under a prime contractor or larger project team. The place of performance is in Issaquah, Washington, and all work must comply with local and state requirements for land development and geotechnical engineering. Interested parties should submit proposals through the provided public purchase portal before the deadline.

City of Issaquah

POSTED

about 16 hours ago

DEADLINE

Foundation Design & Shallow/Deep Foundation AnalysisThe contract seeks to evaluate soil data to determine appropriate foundation systems for various park structures including restrooms, pavilions, and bridges, with recommendations for spread footings, driven piles, or drilled shafts based on geotechnical conditions. The work requires technical analysis of subsurface conditions to ensure structural stability and compliance with engineering standards for public infrastructure. The solicitation is classified as a subcontract under NAICS code 541330, indicating it pertains to engineering services, and is issued by the City of Issaquah in Washington. Submission deadlines are set for August 14, 2026, with the opportunity posted on July 20, 2026, and all work is expected to be performed at park locations within the city. There is no set-aside designation specified, and the contract is open to qualified subcontractors with expertise in geotechnical evaluation and foundation design for municipal projects.

City of Issaquah

POSTED

about 16 hours ago

DEADLINE

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

Same awarding agency

Logistics and Shipment to DLA DestinationsThe contract involves the transportation of packaged aluminum sheets to two designated Department of Defense destinations: DLA Warner Robins in Georgia and Tinker Air Force Base in Oklahoma. Shipping is conducted under FOB Origin terms, meaning the buyer assumes all responsibility and costs for the goods once they leave the seller’s location. Invoicing must comply with the Wide Area WorkFlow system to ensure proper documentation and payment processing. This is a subcontract classified as a Total Small Business Set-Aside under SBA guidelines, exclusively available to small businesses as defined by the Small Business Administration. The North American Industry Classification System code for this procurement is 484220, which corresponds to truck transportation of freight, excluding special commodities. The solicitation was posted on July 20, 2026, with responses due by July 27, 2026, and is issued under the Construction & Equipment MRO Svc I agency program managed by the Department of Defense.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 18 hours ago

DEADLINE

Hazard Communication and Labeling ComplianceThis contract requires strict adherence to OSHA-compliant hazard warning labels as mandated by DFARS 252.223-7001 and OSHA 29 CFR 1910.1200, ensuring all hazardous chemicals are properly labeled in accordance with federal workplace safety regulations. The scope centers on hazard communication and labeling compliance for supplies or services under a subcontract, where accurate and standardized labeling is critical to worker safety and regulatory alignment. All labeled materials must reflect current GHS standards for chemical hazard classification, signal words, pictograms, precautionary statements, and supplier information. The contract is designated as a Total Small Business Set-Aside under SBA guidelines, limiting eligibility to small businesses as defined by the NAICS code 541690, which covers other scientific and technical consulting services. It was posted on July 20, 2026, with responses due by July 27, 2026, and falls under the Department of Defense's Construction & Equipment MRO SVC I procurement category. Performance location details are unspecified, but compliance must meet federal requirements regardless of site. Participation requires a thorough understanding of both OSHA and DFARS labeling obligations to ensure full regulatory compliance and avoid contract noncompliance penalties.

Other Scientific and Technical Consulting Services

POSTED

about 18 hours ago

DEADLINE

Preservation, Packaging, and Marking ServicesThe contract seeks subcontractor services for the preservation, packaging, and marking of aluminum sheets in accordance with military standards, requiring specific processes including drying, edge protection, fiberboard wrapping, and adherence to MIL-STD-129 labeling with the code 'ZZ'. All work must meet stringent defense requirements to ensure product integrity during storage and transport. The solicitation is restricted to small businesses under a Total Small Business Set-Aside as defined by the SBA and FAR 19.5, with the North American Industry Classification System code 493190 indicating warehousing and storage services. The opportunity is issued under the Department of Defense’s Construction & Equipment MRO SVC I program, with responses due by July 27, 2026, and was posted on July 20, 2026. Performance location details are unspecified, and interested parties must access the full solicitation through the DIBBS portal using the provided link.

Other Warehousing and Storage

POSTED

about 18 hours ago

DEADLINE

Aluminum Alclad Metal Sheet SupplyThe contract calls for the supply of 600 aluminum alclad sheets measuring 0.032 inches thick by 48 inches by 144 inches, manufactured from alloy 2024-T3 and fully compliant with SAE AMS4462B and applicable military specifications. These materials are intended for specialized defense applications requiring high strength-to-weight ratios and corrosion resistance, typical of aerospace and defense system manufacturing. The contract is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to bid, reinforcing compliance with FAR 19.5 guidelines. The North American Industry Classification System code 331315 identifies the relevant industry as aluminum rolling, drawing, and extruding, ensuring the offeror possesses appropriate industrial capability. The solicitation was posted on July 20, 2026, with responses due by July 27, 2026, providing a one-week window for submission. The contract falls under the Department of Defense, specifically managed by the Construction & Equipment MRO SVC I organization, indicating the end-use is for maintenance, repair, and overhaul of military equipment. While no specific delivery location or point of contact is listed, performance is expected to support U.S. defense infrastructure, with all materials required to meet stringent defense quality standards. Interested parties must access the official solicitation portal via the provided DIBBS link to review full technical requirements and formal submission instructions.

Aluminum Sheet, Plate, and Foil Manufacturing

POSTED

about 18 hours ago

DEADLINE

Hazardous Material Handling and SDS SubmissionThe contract requires strict compliance with the identification, handling, and labeling of hazardous materials in accordance with DFARS 252.223-7001 and MIL-STD-129 standards. All hazardous substances must be properly documented with corresponding Safety Data Sheets submitted as part of the delivery and packaging process, ensuring full regulatory alignment and operational safety throughout the supply chain. The scope encompasses end-to-end management of hazardous material protocols, from initial recognition through final shipment, with an emphasis on accuracy in labeling and timely SDS submission to meet Department of Defense requirements. This subcontract, posted on July 20, 2026, with a response deadline of July 27, 2026, falls under NAICS code 562910 for other remediation services and is administered by the Department of Defense under the Construction & Equipment MRO SVC I contract vehicle. The place of performance and specific office details are not provided, but all work must adhere to federal military standards for hazardous material logistics. Interested parties must respond by the deadline through the DIBBS portal to be considered for award.

Remediation Services

POSTED

about 18 hours ago

DEADLINE

Certificate of Quality and Mill Certification ServicesThe contract requires the generation and submission of a Certificate of Quality alongside comprehensive mill-material traceability documentation for all supplied materials. This includes detailed reporting of heat and lot numbers, specific alloy grade, temper designation, and confirmation of compliance with applicable ASTM and SAE standards. All documentation must be accurate, complete, and verifiable to ensure material integrity and regulatory alignment throughout the supply chain. The service is being procured as a subcontract under the NAICS code 541380, with the Department of Defense through its Construction & Equipment MRO SVC I office acting as the contracting entity. Responses must be submitted by the deadline of July 27, 2026, and the work must adhere strictly to the technical requirements outlined to meet military-grade material assurance protocols.

Testing Laboratories and Services

POSTED

about 18 hours ago

DEADLINE

Marking and Labeling ServicesThe contract requires permanent marking of aluminum plates in strict compliance with MIL-STD-129 and ASTM B666 standards, ensuring traceability and regulatory adherence for defense-related applications. Marking must include critical identifiers such as the National Stock Number, alloy designation, heat or lot number, dimensions, and applicable specifications, using approved methods including stamping, stenciling, or adhesive labels. All markings must be durable, legible, and resistant to environmental degradation to meet military durability requirements. This is a subcontract solicitation issued under NAICS code 323111 for printing and related support activities, managed by the Department of Defense through the CONSTRUCTION & EQUIPMENT MRO SVC I organization. The solicitation is open for responses from July 20, 2026, with a firm deadline for submissions on July 27, 2026. The place of performance and point of contact details are not specified, but adherence to the technical standards and submission timeline is mandatory for consideration. Interested parties must ensure full compliance with the marking methods and data requirements outlined in the referenced military and material specifications.

Commercial Printing (except Screen and Books)

POSTED

about 18 hours ago

DEADLINE

Packaging and Preservation ServicesThe contract entails the packaging and preservation of aluminum plates in strict accordance with military standards MIL-STD-2073-1E and material specification ASTM B660-23, ensuring compliance with defense-grade requirements for handling and storage. The work includes specific preservation method ZZ, which involves detailed cleaning and thorough drying procedures to prevent corrosion and contamination, followed by proper palletization to ensure secure transport and long-term integrity. All processes must meet the rigorous environmental and quality controls mandated by the Department of Defense to maintain material readiness and operational reliability. This is a subcontract opportunity under the NAICS code 385110, posted by the Department of Defense through its Construction & Equipment MRO SVC I contracting office. Responses are due by July 27, 2026, with the solicitation open for submission starting July 20, 2026. While no specific place of performance or point of contact is listed, the work is expected to align with DLA logistics infrastructure and procurement protocols, and all submissions must be made through the official DIBBS platform using the provided solicitation number SPE8E926Q0602.

POSTED

about 18 hours ago

DEADLINE

Aluminum Metal Plate Supply and ConformanceThe contract calls for the supply of aluminum alloy plates with precise specifications: 0.250 inch thickness and dimensions of 36 by 96 inches, fully compliant with SAE AMS4016N, ASTM B209, and AMS-QQ-A-250/8C standards. Full traceability and certified documentation are required to ensure every batch meets the mandated material and quality benchmarks, with all certifications included to verify conformance. The plates must be produced and delivered under strict adherence to established aerospace and military-grade material protocols, ensuring reliability for critical applications. This is a subcontract under the Department of Defense’s Construction & Equipment MRO SVC I program, with a solicitation posted on July 20, 2026, and responses due by July 27, 2026. It falls under NAICS code 331315, indicating a focus on aluminum rolling, extruding, and drawing. The place of performance and point of contact details are not specified, but the procurement is managed through the DLA’s DIBBS platform, and suppliers must meet stringent compliance and certification requirements to qualify for award. All deliveries must align with the contractual material standards and documentation expectations without exception.

Aluminum Sheet, Plate, and Foil Manufacturing

POSTED

about 18 hours ago

DEADLINE

Military Marking and Barcoding ServicesThe contract requires the application of standardized military markings and barcodes in strict compliance with MIL-STD-129 to ensure proper item identification, traceability, and storage labeling for defense-related equipment and supplies. All labeling must adhere to the established military standards to support operational readiness, logistics tracking, and inventory management across the Department of Defense supply chain. The work is to be performed at the Tobyhanna location with a ZIP code of 18466-5050, and the subcontract is classified under NAICS code 561990 for other administrative and support services. Responses must be submitted by July 31, 2026, with the solicitation posted on July 20, 2026, and is open for bidding through the DIBBS platform. No set-aside provisions are specified, and the contracting activity falls under the Construction & Equipment MRO SVC I organization within the Department of Defense.

All Other Support Services

POSTED

about 18 hours ago

DEADLINE

Hazardous Materials Labeling and ComplianceThe contract requires the provision of hazard warning labels and Material Safety Data Sheets (MSDS) for rubber strip products, strictly in accordance with 29 CFR 1910.1200, which governs hazard communication standards. Compliance is mandatory unless the rubber strip qualifies for exemption under the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA), the Federal Food, Drug, and Cosmetic Act (FDCA), the Consumer Product Safety Act (CPSA), the Federal Hazardous Substances Act (FHS), or the Federal Aviation Administration (FAA) regulations. The work is structured as a subcontract under NAICS code 541690, falling under the Department of Defense’s Construction & Equipment MRO SVC I program, with performance obligations centered at Tobyhanna, Pennsylvania, zip code 18466-5050. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, and all deliverables must align with U.S. regulatory requirements to ensure the safe handling, storage, and use of the rubber strip material in defense-related applications.

Other Scientific and Technical Consulting Services

POSTED

about 18 hours ago

DEADLINE

Military-Compliant Packaging and Preservation ServicesThe contract requires the provision of military-compliant packaging, preservation, and unit containment services aligned with Defense Logistics Agency specifications, including the application of packaging code U and the use of unit containers in quantities of ten per unit, all palletized in accordance with RP001 standards. Services must ensure full compliance with Department of Defense preservation protocols to maintain equipment integrity during storage and transit. The place of performance is fixed at Tobyhanna, Pennsylvania, with the ZIP code 18466-5050, and the work falls under NAICS code 493190, indicating specialized logistics and packaging support for defense materiel. This is a subcontract issued under the Construction & Equipment MROSvc I procurement vehicle by the Department of Defense. Proposals must be submitted by July 31, 2026, with the solicitation posted on July 20, 2026, and all work must be performed to meet exacting military requirements for unit containment and packaging integrity. No set-aside provisions are specified, and the contract is open to eligible subcontractors capable of fulfilling DLA’s stringent packaging and preservation standards. The official portal for all solicitation details is accessible through the DIBBS platform, where vendors can obtain additional technical and procedural guidance.

Other Warehousing and Storage

POSTED

about 18 hours ago

DEADLINE