Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Quality Assurance & Inspection Services for Bearing Production

Active

Federal

Response Deadline08/26/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires comprehensive quality assurance and inspection services specifically for bearing production, ensuring full compliance with military standards throughout the manufacturing lifecycle. Key responsibilities include conducting first-article inspections, performing in-process quality checks, and executing final testing protocols, all supported by precise CMM reporting, validated material certifications, and non-destructive testing methods to verify structural integrity and dimensional accuracy. These activities must align with stringent DoD requirements, emphasizing traceability, repeatability, and adherence to established technical specifications. The work is to be performed at a designated location in Richmond, Virginia, with a zip code of 23297, under a subcontract arrangement managed by DLA Aviation under the Department of Defense. The solicitation was posted on August 5, 2026, with a firm deadline for responses on August 26, 2026, at 7:00 PM. The NAICS code 541380 indicates this falls under scientific and technical consulting services, reflecting the specialized nature of the quality control work required. All deliverables must meet federal defense quality benchmarks without exception, and the contractor is expected to demonstrate proven capability in military-grade inspection practices.

General Info

Quality assurance for military bearing production in Richmond, VA, with CMM reporting, NDT, and DoD compliance.

Agency

Department Of Defense → DLA AviationView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

Richmond, VA, 23297, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 5

subcontract

Response DeadlineAug 26

Submission deadline

Response Deadline

08/26/2026, 07:00:00 PM UTCin 21 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Aviation

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → DLA Aviation

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Perform first-article inspections, in-process QA checks, and final testing per military standards, including CMM reporting, material certifications, and non-destructive testing.

Similar Contracts

Same NAICS industry code

Radioactive Materials Notification and Compliance (if applicable)

DDSP NEW CUMBERLAND FACILITY

POSTED

about 10 hours ago

DEADLINE

Quality Inspection and Certification ServicesThe contract requires the performance of in-process and final inspections in strict accordance with MIL-STD-1916 or ASQ Z1.4 standards, with an absolute requirement of zero defects across all inspected items. All inspections must be documented and accompanied by a Certificate of Conformance, ensuring that each product meets the specified quality criteria before delivery. The contractor is also obligated to support government inspection activities at the origin, providing full cooperation and access to records, facilities, and personnel to verify compliance with contractual quality requirements. The work is classified as a subcontract under NAICS code 541380 and is managed by the ASC Commodities Division within the Department of Defense, with the place of performance located in New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation was posted on August 5, 2026, and responses are due by August 13, 2026. All work must be completed in alignment with these timelines and standards, with no tolerance for defects or nonconformities, emphasizing an uncompromising commitment to quality assurance.

ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

First Article Testing (FAT) ServicesThe contract solicits services for First Article Testing (FAT) on a pressure gauge, requiring full performance and documentation in accordance with military standards. This includes comprehensive inspection, rigorous testing, and the preparation of detailed test reports that must be submitted to government authorities to verify compliance with specified technical and quality requirements. The work must be executed to meet rigorous defense procurement protocols, ensuring that the pressure gauge meets all necessary performance, durability, and safety criteria before production scaling. The contract is classified as a subcontract under NAICS code 541380, managed by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense, with performance required to take place in New Cumberland, Pennsylvania, ZIP 17070-5002. The solicitation was posted on August 5, 2026, and responses are due by August 13, 2026, with all documentation and deliverables expected to align with federal defense contracting expectations. While no specific set aside status is indicated, full adherence to military documentation and submission procedures is mandatory for successful bid evaluation and contract award.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 10 hours ago

DEADLINE

Quality Assurance and Testing Services

DLA DIST SAN JOAQUIN

POSTED

about 10 hours ago

DEADLINE

Packaging, Marking, and Hazardous Materials Compliance ServicesThe contract seeks technical support services for military-compliant packaging, labeling, and hazardous materials documentation, with a focus on preparing labels and safety data sheets that meet Defense Logistics Agency standards. The work involves ensuring all packaging and marking procedures align with required military specifications and that hazardous materials documentation is accurate, complete, and fully compliant with federal and DLA regulations. This subcontract is set aside entirely for small businesses under the SBA's Total Small Business Set-Aside program, and it is classified under NAICS code 541380, which relates to other scientific and technical consulting services. The solicitation was posted on August 5, 2026, with proposals due by August 20, 2026, and the performance location remains unspecified. The contracting agency is the Strategic Acquisition Program Directorate within the Department of Defense, with no point of contact provided in the data.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 10 hours ago

DEADLINE

Quality Assurance and Government Inspection Support

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 10 hours ago

DEADLINE

First Article and Production Lot Testing Coordination

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 10 hours ago

DEADLINE

Quality Assurance and Origin Inspection Support

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 10 hours ago

DEADLINE

Radioactive Materials Notification (If Applicable)The contract requires the identification and technical notification of any radioactive components within fire extinguishers, specifically in compliance with Clause 52.223-7 and MIL-STD-129 labeling standards. This work is focused on ensuring that any presence of radioactive material is properly documented and marked according to federal and military guidelines to safeguard handling, storage, and disposal procedures. The performance location is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating the physical site where the testing and notification activities must be conducted. This subcontract is classified under NAICS code 541380, which pertains to other scientific and technical consulting services, and it was posted on August 5, 2026, with a response deadline of August 17, 2026. The contracting entity is the DDSP NEW CUMBERLAND FACILITY under the Department of Defense, and the solicitation is administered via the DIBBS system under reference number SPE8E626T4048. There is no set-aside designation specified, and the contract does not include a designated point of contact within the provided details.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 10 hours ago

DEADLINE

Hazardous Materials Compliance & Labeling Services

CHERRY POINT PHANTOM RD BLDG

POSTED

about 10 hours ago

DEADLINE

Technical Data and Marking ServicesThe contract requires the provision of IPC/JEDEC-compliant marking for lead content, clearly distinguishing between lead-containing and lead-free components, along with complete technical documentation for each unit pack. This service ensures regulatory compliance and traceability across the supply chain, meeting stringent military and industrial standards for electronic components. The work must be performed to exact specifications to support accurate identification and handling of materials in defense-related applications. The contract, titled Technical Data and Marking Services, is classified as a subcontract under NAICS code 541380 and is issued by the ACTIVE DEVICES DIVISION of the Department of Defense. The place of performance is specified as Columbus, Ohio, with a zip code of 43213. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026. No set-aside designation is applicable, and no point of contact information is provided within the data, though further details can be accessed through the provided DIBBS link.

ACTIVE DEVICES DIVISION

POSTED

about 10 hours ago

DEADLINE

Technical Data and Compliance Documentation PackagingThe contract requires the preparation and packaging of welding qualification documentation in strict compliance with Defense Logistics Agency standards, ensuring all technical data is accurately formatted for digital submission. The work involves adhering to MIL-STD-129 specifications for labeling and securing all documentation to meet Defense Department requirements, with the place of performance located at the New Cumberland facility with a ZIP code of 17070-5002. The solicitation is classified as a subcontract under NAICS code 541380 and was posted on August 5, 2026, with a deadline for responses set for August 17, 2026. All submissions must be managed with precision to satisfy the technical and regulatory expectations of the Department of Defense, specifically under the DDSP New Cumberland Facility, with no set-aside provisions applied to this opportunity.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 10 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA Aviation

Same awarding agency

Supply Chain & Raw Material Sourcing for Bearing ComponentsThe contract requires the supply of high-grade alloy steel, rollers, cages, and seals for needle roller bearing assemblies, all of which must meet stringent defense-grade specifications. All materials must be accompanied by fully traceable certifications verifying composition, origin, and compliance with military procurement standards, ensuring quality and authenticity throughout the supply chain. The components are destined for critical defense applications, necessitating adherence to strict sourcing protocols and documented provenance to support accountability and reliability in operational environments. Performance of this subcontract is centered in Richmond, with a response deadline of August 26, 2026, and is managed under the Department of Defense through DLA Aviation. The North American Industry Classification System code 423520 indicates the focus on wholesale trade of industrial equipment and supplies, aligning the procurement with established defense logistics workflows. Although no specific set-aside provisions are identified, the nature of the solicitation implies exclusivity to qualified vendors capable of meeting defense-level material requirements and certification frameworks. Participation is restricted to entities capable of delivering fully compliant, traceable components with full transparency into manufacturing and sourcing history.

Coal and Other Mineral and Ore Merchant Wholesalers

POSTED

about 15 hours ago

DEADLINE

Technical Data Package & Drawing Compliance SupportThe contract entails providing engineering support focused on interpreting military drawings and technical specifications to ensure accurate implementation and compliance with defense standards. Key responsibilities include developing internal process documentation that aligns with required protocols and preparing rigorous Source Approval Request submissions, ensuring all technical and procedural criteria are met for approval. This work is critical to maintaining interoperability and quality across defense supply chains and requires deep familiarity with military technical documentation standards and submission workflows. The solicitation is classified as a subcontract under NAICS code 541330, indicating engineering services, and is issued by DLA Aviation under the Department of Defense. Responses are due by August 26, 2026, with the work to be performed in Richmond at the ZIP code 23297. The contract does not specify a set-aside type or point of contact, and the details suggest it is part of a broader procurement effort to secure technical expertise for sustaining defense logistics and manufacturing compliance.

Engineering Services

POSTED

about 15 hours ago

DEADLINE

Needle Roller Bearing ManufacturingThe contract requires the manufacture of a precision needle roller bearing, identified by NSN 3110-00-455-6188 and part number 114RS214-5, to meet strict military specifications. The work encompasses the full production lifecycle including material sourcing, precision machining, heat treatment, assembly, and rigorous testing to ensure compliance with defense standards. All processes must adhere to quality control protocols suitable for military-grade components, with final products expected to withstand demanding operational environments. The solicitation is classified as a subcontract under NAICS code 332991 and is managed by DLA Aviation, a division of the Department of Defense. The place of performance is designated as Richmond, Virginia, with a zip code of 23297. Bids must be submitted by the deadline of August 26, 2026, at 7:00 PM Eastern Time, with the opportunity posted on August 5, 2026. No set-aside provisions are specified, meaning eligible contractors of any size may respond, provided they can meet the technical and compliance requirements outlined in the procurement.

Ball and Roller Bearing Manufacturing

POSTED

about 15 hours ago

DEADLINE

BEARING,SLEEVE,LINE

Solicitation # SPE4A626Q1284

The U.S. Department of Defense, through the Defense Logistics Agency Aviation, is seeking information on manufacturers capable of producing the sleeve bearing with NSN 3110-01-341-6408, previously sourced from KATO ENGINEERING INC. with part number 012-63499-54. This request is purely for market research and does not constitute a solicitation, proposal, or binding commitment from the government. Respondents are asked to identify any sources that can manufacture the item, including the manufacturer’s location by city and state or country, and to provide contact information if available. All submissions must be sent to Matthew Diefes at matthew.diefes@dla.mil or via phone at 804-718-8776, with responses due by August 12, 2026. Participation is entirely voluntary, and no contract award is guaranteed based on the information received. The solicitation is categorized as a sources-sought notice under NAICS code 336412, which pertains to aircraft engine and engine parts manufacturing, and carries no set-aside preferences. It is posted under solicitation number SPE4A6326Q1284 with a primary point of contact at DLA Aviation’s office in Richmond, Virginia, and a secondary contact available for follow-up. The place of performance is also listed in Richmond, Virginia. The notice explicitly states that responses are not offers and the government has no obligation to proceed with procurement as a result of the information gathered. Interested parties are encouraged to submit details by the deadline to assist in identifying potential suppliers for future procurement planning.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 15 hours ago

DEADLINE

"NSN 1680-01-540-1829, CARGO DOOR ASSEMBLY, WSDC: YLN, HELICOPTER, SEAHAWK, H-60.”

Solicitation # SPE4A526R0284

The U.S. Department of Defense, through DLA Aviation’s Weapons Support office in Richmond, Virginia, is conducting market research to identify qualified vendors capable of manufacturing the Cargo Door Assembly with NSN 1680-015401829 and part number 70207-22201-064. This effort seeks entities with the technical, financial, and operational capacity to perform full-scale new manufacture including component fabrication, inspection, testing, preservation, packaging, and shipping, as well as manage complex supply chain logistics, mitigate diminishing manufacturing sources, and handle long-lead procurement challenges. The associated NAICS code is 336413, and the estimated requirement is for ten units, with no existing technical orders or qualification documents available. The government has identified Sikorsky Aircraft Corporation as an approved source but is exploring additional competitors to inform future procurement strategy, which may include setting aside the contract for small businesses or pursuing full and open competition with possible multiple award outcomes. Responses are voluntary and do not constitute a solicitation, with no financial reimbursement for submission costs. Interested parties must provide organizational details including size, ownership type, contact information, website, and tailored capability statements substantiating their ability to meet program demands such as schedule adherence, cost control, performance tracking, key personnel retention, and risk mitigation under a performance-based acquisition model. Subcontracting or teaming arrangements must be clearly outlined with governance structures. All submissions must be emailed to Samuel Kogi at Samuel.kogi@dla.mil no later than August 10, 2026, and no phone inquiries or feedback on submissions will be accepted. Organizations seeking to become an approved source must submit a Source Approval Request via DoDSafe by emailing dlaavnsmallbus@dla.mil with the required CAGE code, NSN, and contact email to receive the secure submission link.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

NSN: 1560-005743457, EJECTOR ASSEMBLY, WI, WSDC: 06F, AIRCRAFT, HERCULUS C-130

Solicitation # SPE4A726R0756_SourcesSought

The Defense Logistics Agency Aviation is conducting market research to identify qualified entities capable of manufacturing or legitimately obtaining the Ejector Assembly, WI, identified by NSN 1560-005743457 and Weapon System Designator Code 06F, which is used on the Hercules C-130 aircraft. Currently, this item is supplied exclusively by Arrowhead Products Corp, Senior Operations LLC, and Lockheed Martin Corp under part number 351781. The agency is not seeking proposals or binding offers through this notice but is instead gathering information to evaluate potential new sources to ensure continued supply chain resilience. Any interested party wishing to be considered as an approved source must submit a complete Source Approval Request (SAR) package in accordance with the guidelines outlined in the Aviation Source Approval and Management Handbook, demonstrating that their product meets or exceeds the quality, performance, and technical specifications of the existing approved item. Responses to this sources sought notice must be submitted by August 10, 2026, at 8:00 a.m. Eastern Standard Time, to Tatjana Klemmer at tatjana.klemmer@dla.mil. No funds are available for the preparation of responses, and submission does not obligate the government to award a contract. The contracting office is located at 6090 Strathmore Rd., Richmond, VA 23237, and the North American Industry Classification System code for this effort is 336413, which pertains to aircraft manufacturing. Candidates are reminded that the SAR process can take more than 180 days for review and requires thorough documentation of technical capability, quality control, and compliance with applicable defense standards.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

BEARING,PLAIN,ROD END

Solicitation # SPE4A6-26-Q-1291

The government is seeking information on manufacturers capable of producing the plain rod end bearing with NSN 3120-01-417-0135, currently associated with part numbers LB6-1034-25-1 from LORD CORP and SB7111-101 from SIKORSKY AIRCRAFT CORPORATION. Respondents are requested to identify any sources with manufacturing capability for this item and provide the manufacturer’s location by city and state or country, along with contact information if available. This request is strictly for informational purposes under a sources-sought notice and does not constitute a solicitation, proposal request, or binding commitment from the government. All submissions are voluntary and will not obligate the government to award a contract. The activity is administered by DLA Aviation out of Richmond, Virginia, with Matthew Diefes as the primary point of contact for responses, which must be submitted by August 26, 2026. The solicitation is designated as a Small Business Set Aside – Total under NAICS code 332991.

Ball and Roller Bearing Manufacturing

POSTED

about 15 hours ago

DEADLINE

NSN 2915-01-313-4615, BYPASS INDICATOR, WSDC: 26F

Solicitation # SPE4A726R0755_SourceSought

The Department of Defense, through DLA Aviation, is conducting market research to identify qualified suppliers capable of manufacturing the bypass indicator identified by NSN 2915-01-313-4615 and part number TD221MF0DCY5. This effort is not a solicitation and no contract award will result from this request. The government seeks capability statements from organizations that can perform the full scope of new manufacture including component procurement, inspection, testing, packaging, shipping, supply chain management, and mitigation of material shortages. The NAICS code 336412 applies, and the requirement spans a five-year base period with no options. Currently, Pall Aeropower Corp is the approved source, and any other vendor must submit a Source Approval Request to be considered. Responses must include organizational details, capability documentation, and information on subcontracting or teaming arrangements, with no financial liability assumed by the government for submission costs. All submissions are due by August 10, 2026, and must be emailed to TATJANA.KLEMMER@DLA.MIL. The government will use responses to determine whether to set aside the eventual contract for small businesses or pursue full and open competition, potentially making multiple awards. The DLA does not hold complete technical data on the part, further emphasizing the importer for suppliers to demonstrate technical and operational competency. No telephone inquiries will be accepted, and no feedback or evaluations will be provided on submissions. Interested parties should note that the place of performance is undetermined and final unit pricing will be established at contract award time. Questions regarding this market research should be directed to TATJANA.VAUGHAN@DLA.MIL.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 15 hours ago

DEADLINE

5975-014506278 MOUNTING BASE, TIEDO ATF

Solicitation # SPE4A726R0742

The solicitation for Mounting Base, Tiedo ATF under contract number SPE4A726R0742 is a presolicitation issued by the Defense Logistics Agency Aviation, with a firm fixed price structure for a quantity of 4,800 units, delivered FOB origin with inspection and acceptance at destination. The item is critical to application and only two approved sources are recognized: General Dynamics Mission Systems, Inc. with part number 86-1326374-2 and Panduit Corp with part number ABM2S-S6-D. The final award will consider price, past performance, and other evaluation criteria detailed in the complete solicitation. The solicitation will be publicly accessible via the DLA Internet Bid Board System on or around August 18, 2026, with responses due by September 18, 2026, and will only be available in PDF format requiring Adobe Acrobat Reader. The NAICS code is 335999, and the place of performance is in Richmond, Virginia, with primary point of contact Angela Haden and secondary contact Leslie Adams. The posting date is August 5, 2026, and the response deadline listed in the data is August 17, 2026, at 6:30 PM EST.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 15 hours ago

DEADLINE

Solicitation # SPE4A726R0630

The Defense Logistics Agency is conducting market research through a sources sought notice to identify qualified parties capable of manufacturing the sonar beacon identified by NSN 5845-01-643-2316 and part numbers DK120-90 and DK120/90. This effort requires full new manufacture of the item, including procurement and production of component parts, inspection, testing, preservation, packaging, and shipping, along with supply chain management responsibilities such as logistics planning, production forecasting, long-lead part procurement, and mitigation of diminishing manufacturing sources and material shortages. The agency has identified two approved sources, Radiant Power Corp and Dukane Seacom, Inc., but is assessing broader market capacity to determine whether the requirement will be set aside for small businesses or opened to full and open competition. No solicitation exists at this time, and submissions are voluntary, with no financial liability assumed by the government for respondents’ costs. Drawings, technical orders, and qualification requirements are not available, and respondents must demonstrate their ability to deliver under a performance-based service acquisition contract with strong project management capabilities, including adherence to tight schedules, cost control, performance tracking, personnel retention, and risk mitigation. Organizations must submit their name, address, contact details, ownership structure, and tailored capability statements with supporting documentation, including details on any subcontracting or teaming arrangements. Responses are due by June 3, 2026, and must be emailed to Montana.Kipp@dla.mil. The North American Industry Classification System code for this requirement is 334290, and the contracting office is located in Richmond, Virginia. No feedback, evaluations, or telephone inquiries will be provided, and the unit price will be determined only upon contract award, with estimated quantities ranging from a minimum of 135 units to a maximum of 521 units.

Other Communications Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

in about 2 months

BEARING,ROLLER,NEEDLE

Solicitation # SPE4A626Q1293

The U.S. Department of Defense, through the Defense Logistics Agency Aviation, is seeking information on manufacturers capable of producing the roller needle bearing with NSN 3110-00-455-6188 and part number 114RS214-5. The request is a sources-sought notice, not a solicitation or commitment to award a contract, and responses are voluntary. Identified current suppliers include RBC Bearings Inc, Leonardo SPA Helicopters Division, and Industrial Tectonics Bearings, with the government requesting additional sources along with their locations and points of contact. All submissions must be sent to Matthew Diefes at matthew.diefes@dla.mil by the deadline of August 26, 2026, with additional support available from Kee-Sha Epps-Eskridge. The notice is categorized under NAICS code 332991, and while the performance location is listed as Richmond, Virginia, the government has not imposed any set-aside requirements for small businesses or other categories.

Ball and Roller Bearing Manufacturing

POSTED

about 15 hours ago

DEADLINE

Solicitation # 1680016276027

The solicitation numbered SPE4A726R0561 is a non-commercial, firm fixed price procurement under FAR Part 15, seeking surplus or newly manufactured plenum assemblies with NSN 1680016276027, approved for source The Boeing Company. Only surplus dealers, small business dealers, and distributors with existing stock or newly manufactured inventory are invited to respond, requiring completion of the DLAD 52.211-9000 surplus certificate or equivalent traceability documentation to confirm product acceptability. Responses must include available quantities and pricing, and the government reserves the right to adjust its acquisition strategy based on the availability of surplus or newly manufactured inventory if it serves best interest. The contract will be awarded unrestricted with FOB Origin terms, inspection and acceptance occurring at destination, and an anticipated delivery requirement of 315 days after receipt of order. The solicitation will be issued electronically through the DIBBS website with no paper copies available, requiring Adobe Acrobat Reader for access. The response deadline is August 25, 2026, and all submissions must align with the evaluation criteria of price, past performance, and other specified factors. The contracting office is located in Richmond, Virginia, and the primary point of contact is Tiffani Perry via email at Tiffani.Perry@dla.mil.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE