Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Quality Assurance and Inspection Services

Active

Federal

Response Deadline08/10/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the execution of rigorous quality assurance inspections on defense-grade hardware, adhering strictly to MIL-STD-1916 or ASQ H1331 sampling plans with defined acceptable quality levels: 0.1 for critical defects, 1.0 for major defects, and 4.0 for minor defects. These inspection standards ensure that all delivered hardware meets the high-integrity requirements necessary for military applications, with inspections conducted to assess conformance at every layer of production and assembly. The work is classified as a subcontract under NAICS code 541330 and is managed by the Department of Defense through the Aviation Supply Chain organization, with performance required at Hill Air Force Base, Utah, zip code 84056-5734. The solicitation, posted on July 29, 2026, with a response deadline of August 10, 2026, is aimed at securing qualified vendors capable of delivering precise, compliant inspection services under strict defense protocols.

General Info

Defense hardware inspections per MIL-STD-1916 at Hill AFB with AQL 0.1/1.0/4.0 for critical/major/minor defects.

Agency

Department Of Defense → AVIATION SUPPLY CHAINView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

HILL AFB, UT, 84056-5734, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 29

subcontract

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → AVIATION SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → AVIATION SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Perform quality inspections using MIL-STD-1916 or ASQ H1331 sampling plans with AQLs of 0.1 (critical), 1.0 (major), and 4.0 (minor) for defense-grade hardware acceptance.

Similar Contracts

Same NAICS industry code

Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide Construction Management services under an Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract to support major construction projects across various phases including planning, design, construction, and closeout. These services will encompass a range of delivery methods such as Design Build, Progressive Design Build, and other alternative project delivery formats, with the primary goal of ensuring projects adhere to authorized schedules, budgets, and quality standards. The contract is intended to streamline oversight and coordination for the Port’s extensive capital improvement initiatives, requiring technical expertise in managing complex infrastructure developments. Primary point of contact for this opportunity is Hala Rabbo, who can be reached via email or phone, with additional support available from Project Manager Ann Davidson. The solicitation is classified under NAICS code 541330, which designates architectural, engineering, and related services. Although the contract is currently posted as a forecast with no official solicitation number or set-aside details, interested parties are encouraged to monitor the provided UI link for updates and future formal solicitations. The performance location will be at various Port of Seattle facilities and project sites, with no specific city or state specified in the metadata, indicating broad geographic scope across Port operations.

Construction Management

POSTED

about 3 hours ago

DEADLINE

Retro-Commissioning, TAB, Controls, and Regulatory Support IDIQThe consultant will deliver retro-commissioning, test/adjust/balance, controls, and regulatory support services across Seattle-Tacoma International Airport’s facilities and infrastructure systems, ensuring optimal performance in a continuous 24/7/365 operational environment. The scope includes identifying and correcting deficiencies in mechanical, HVAC, plumbing, lighting, Direct Digital Controls, smoke control, and fire protection systems to enhance efficiency, comfort, reliability, and lifespan while maintaining compliance with safety and regulatory standards. Services are delivered through Service Directives and require close collaboration with Aviation Facilities and Infrastructure to meet project deliverables. Work will be managed under an Indefinite-Delivery/Indefinite-Quantity contract, with the Port of Seattle’s Aviation Facilities and Infrastructure team as the primary point of contact. The procurement is classified under NAICS code 541330, reflecting professional, scientific, and technical services related to engineering. Key contacts include Jason Gates as the primary point of contact and Jim Farris as the project manager, both reachable through the Port of Seattle’s official communications. The solicitation was posted on July 31, 2026, with performance expected to occur at the airport location, though specific geographic details are not defined in the provided data.

Aviation Facilities & Infrastructure

POSTED

about 3 hours ago

DEADLINE

27-002- GRANT WRITING/ADMINISTRATIVE & RELATED GRANT SERVICES

Solicitation # PE-72650-NONST-2027-000000044

The City of Griffin, Georgia is soliciting qualified engineering firms to provide comprehensive services for federally assisted projects, including the preparation of a Preliminary Engineering Report, final design, and construction administration. Firms must demonstrate a proven track record in supporting local governments through all phases of federally funded initiatives, ensuring compliance with federal requirements and efficient project delivery. The scope requires technical expertise in navigational federal grant frameworks and the ability to manage complex engineering tasks from concept through to construction oversight. Proposals must be submitted by September 4, 2026, and should be directed to Suzanne Partin at the City of Griffin, with inquiries handled via email at lpartin@cityofgriffin.com or phone at 470-497-3452. This solicitation, identified by PE-72650-NONST-2027-000000044, is categorized under grant writing and administrative services and is open to firms capable of delivering full-cycle engineering support for projects funded through federal dollars. All work is expected to be performed within the state of Georgia, and firms are expected to align their capabilities with the city’s objectives for infrastructure development and federal funding utilization.

City of Griffin

POSTED

about 12 hours ago

DEADLINE

in about 1 month

RFP for General Engineering Services

Solicitation # 430-13488

Grant County PUD is soliciting proposals for General Engineering Services under RFP number 430-13488, with an estimated contract value of $12 million. The opportunity is open for bidding with a submission deadline of September 2, 2026, at 4:00 PM Pacific Time, and was posted on July 30, 2026. Bidders must register and log in to access detailed bid information and submit proposals, as this is a proposal-based procurement process conducted offline. The contract is not subject to any specific set-aside classifications, and the work will be performed within the state of Washington. Primary contact for inquiries is Tom Hammond, Procurement Officer, reachable at thammond1@gcpud.org, with additional support available from Rebecca Diaz, Procurement Officer, at rdiaz@gcpud.org. The estimated value is preliminary and subject to change upon final contract determination.

Grant County PUD

POSTED

about 12 hours ago

DEADLINE

in about 1 month

The Fannin Water Association requests qualifications from qualified firms or individuals to provide engineering services for work related to the implementation of approved FY 2026 DRA project(s). You are invited to submit a proposal, in accordance with

Solicitation # 3520-20260728140427 FWA

The Fannin Water Association is seeking qualified engineering firms or individuals to provide professional services supporting the implementation of approved FY 2026 DRA projects in Mississippi. Interested parties must submit proposals by the deadline of August 20, 2026, in response to solicitation number 3520-20260728140427 FWA, with submissions required to meet all specified criteria outlined in the request. The engagement is tied to public infrastructure initiatives managed under the Mississippi Department of Finance and Administration, with work expected to occur within the state of Mississippi. While details on set-aside status or NAICS code are not provided, the opportunity is open to eligible professionals seeking to contribute technical expertise to water-related projects funded through state appropriations. Proposals must be submitted through the designated state portal by the stated deadline to be considered.

POSTED

about 14 hours ago

DEADLINE

Construction Project Management O Street State Parking Garage

Solicitation # 20260729048

The Contract solicitation 20260729048 for Construction Project Management services for the O Street State Parking Garage in Sacramento, California, is a qualifications-based procurement issued by the California Department of General Services, Real Estate Services Division, Project Management and Development Branch. The project involves managing a 750-space parking structure with an estimated total design-build budget of $40 million over a 29- to 32-month timeline, including 5 to 8 months of preconstruction and a 24-month progressive design-build phase. Offerors must demonstrate experience in progressive design-build delivery, sustainable building standards such as LEED, Zero Net Energy (ZNE), and Zero Net Carbon (ZNC), as well as compliance with state regulations including CEQA, Labor Code §1774 for prevailing wages, and oversight from the Division of the State Architect and State Fire Marshal. Submission requirements include a letter of interest, a three-page executive summary, Federal Form 330 for both prime and subcontractor entities, and a twelve-page project approach detailing qualifications in key areas such as cost estimating, scheduling, project management systems, regulatory compliance, quality assurance, and leadership. Proposals must be submitted electronically as a single PDF via the DGS Box.com portal by August 19, 2026, at 5:00 p.m. PDT, with no hand deliveries or email submissions accepted. Evaluation will be based on sixteen criteria including firm and key personnel experience, resource availability, ability to work with other entities, use of Big Room and Lean methodologies, commissioning agent capabilities, and project management software proficiency, though no weights or scoring thresholds are disclosed. The selection process typically involves evaluating written responses, shortlisting the top three firms for oral interviews, and then negotiating fees with the selected firm prior to award. Special contractual obligations include mandatory DIR registration for all contractors, submission of certified payroll reports, 10% retention on progress payments with escrow provisions after 60 days of delayed payment, and strict disclosures regarding use of Generative AI in deliverables. Firms must also certify they are not subject to U.S. or California economic sanctions related to Russia. Organizational conflict of interest is mitigated through a contract clause that excludes the selected firm and its affiliates from future design-build contracts for the same project. The point of contact for contractual matters is Therese Dominguez and Nora Sandstedt, while Nick Rossi handles technical inquiries. The work is to be performed entirely at

Department of General Services (DGS), Real Estate Services Division (RESD), Project Management and Development Branch (PMDB)

POSTED

about 14 hours ago

DEADLINE

Expression of Interest - Recreation & Culture Infrastructure

Solicitation # CLS-2026-07-28

The City of Humboldt is seeking expressions of interest from qualified organizations, consultants, and multidisciplinary teams to contribute to Rec-Create Humboldt, a long-term initiative aimed at shaping the future of recreation, sport, wellness, arts, and culture in the region. This effort focuses on developing transformative, multi-use infrastructure that aligns with community needs, supports regional growth, and ensures long-term sustainability. Rather than a competitive procurement, this is an exploratory engagement designed to gather innovative ideas, strategic insights, and proven experience in facility planning, governance, project delivery, funding, operations, sustainability, and community engagement. Organizations with relevant expertise are encouraged to participate in an open dialogue that will inform the City’s future planning, project readiness, and eventual procurement process. Submissions are due by August 27, 2026, at 2:00 p.m. CST, following the release of the Expression of Interest on July 30, 2026. Interested parties should refer to the Rec-Create Humboldt Project Prospectus & Expression of Interest for detailed background and submission guidance. All questions must be submitted in writing to the designated email address. The initiative is managed by the City of Humboldt under the Saskatchewan Public Sector, with Michael Ulriksen serving as the primary point of contact. This process is non-competitive and does not constitute a formal request for proposals, emphasizing collaboration and idea-sharing to build a shared vision for the region’s cultural and recreational future.

City of Humboldt

POSTED

about 15 hours ago

DEADLINE

On-Call Transportation Engineering Services (2026–2029) And Pre-Qualified Shortlist (2026–2028)

Solicitation # 20260729029

Contra Costa County Public Works Department is seeking qualified firms for on-call transportation engineering services through a solicitation with the number 20260729029, valid for the period from 2026 to 2029. This contract establishes a pre-qualified shortlist of vendors to support transportation-related engineering projects across the county, ensuring timely access to specialized expertise as needs arise. Proposals must be submitted by August 28, 2026, and the North American Industry Classification System code for this procurement is 541330, categorizing it under architectural and engineering services. Performance of the work will be centered in Martinez, California, with the primary point of contact being Jeff Valeros, reachable at 925-313-2031 or jeff.valeros@pw.cccounty.us. The solicitation is open to state, local, and educational government entities and does not specify a set-aside category, making it open to all eligible bidders.

Contra Costa County Public Works Department

POSTED

about 16 hours ago

DEADLINE

Safe-Routes-To-School Master Plan Development

Solicitation # 20260729020

The City of Chico, California is soliciting proposals for the development of a Safe Routes to School Master Plan under solicitation number 20260729020, with a response deadline of August 28, 2026. This solicitation, classified under NAICS code 541330 for architectural and engineering services, is intended for planning and design work aimed at improving pedestrian and bicycle safety for students traveling to and from schools within the Chico area. The project will require comprehensive analysis, community engagement, and the creation of a strategic plan to enhance infrastructure, policies, and programs that encourage safe, active transportation for children. All proposals must be submitted by the specified deadline, and the work is to be performed primarily in Chico, California, with a zip code of 95928. Valerie Mills is designated as the primary point of contact for inquiries regarding the solicitation, and information is available through the official BidAmerica portal.

POSTED

about 16 hours ago

DEADLINE

339126/339826/340226

Solicitation # 48120

The City of Klamath Falls is seeking qualified professional firms to provide architect-engineering services for the design of three new F-35-related facilities on Air National Guard leased property at the Crater Lake - Klamath Regional Airport. The projects include a Munitions Maintenance & Inspection Facility, a Munitions Trailer Maintenance Facility, and an Assembly and Control Pad and Storage Facility. Submissions of qualifications and experience must be made through the City’s Bid Express portal by August 4, 2026, with selected proposers notified by August 5, 2026, and potentially invited to virtual interviews whose timing and format will be determined by the Selection Committee. Applicants should not expect reimbursement for any costs related to preparing their submissions or participation in interviews. The selected firm must be prepared to deliver a draft or negotiated proposal by August 24, 2026, with time considered critical to the project timeline. The solicitation is open to qualified entities under the category of state, local, or educational government procurement with no specific set-aside designation.

The City of Klamath Falls

POSTED

about 17 hours ago

DEADLINE

Weld Inspection & Phased Array Ultrasonic Testing (PAUT) Services

Solicitation # SJ473504

Brookhaven Science Associates, LLC, acting as operator of Brookhaven National Laboratory for the U.S. Department of Energy, is seeking qualified contractors to provide on-demand weld inspection and phased array ultrasonic testing services. The contractor must supply all necessary personnel, equipment, tools, materials, and supervision to perform a range of non-destructive testing methods including visual weld inspection, phased array ultrasonic testing, shear wave ultrasonic testing, and magnetic particle testing. These services are critical for maintaining the integrity of BNL’s aging utility and process piping systems, and will be conducted in both confined and non-confined spaces under the direct authorization of a designated BSA technical representative. The solicitation is open to full and open competition with award determined by the Lowest Priced Technically Acceptable criterion, requiring all submissions to meet mandatory qualification standards outlined in the solicitation package. Interested parties must thoroughly review the Request for Quote, Statement of Work, Draft Purchase Order, Wage Determination, and associated documents prior to submitting a quotation. All questions must be submitted by August 12, 2026, at 5:00 PM Eastern Time, and quotations are due no later than August 21, 2026, at 5:00 PM Eastern Time. The work location is Upton, New York, and inquiries should be directed to Stephen Johnston at Brookhaven National Laboratory.

Brookhaven National Labor -Doe Contractor

POSTED

about 20 hours ago

DEADLINE

Request for White Papers: Advanced Test and Logistics Support Services (ATLSS)

Solicitation # FA910126RWP_ATLSS

The Department of the Air Force is soliciting whitepapers under an Other Transaction Agreement (OTA) authorized by 10 U.S.C. § 4022 to develop and demonstrate a centralized, agile, and highly responsive Business Process Prototype for the 704th Test Group. This initiative, titled Advanced Test and Logistics Support Services (ATLSS), centers on creating an Online Workflow Management System (OWMS) portal accessible via AFNET, with a planned transition to a PKI/CAC enabled, FEDRAMP-certified IL5 enclave. The prototype must enable automated triage, routing, unique ID tracking, and funds authorization while achieving 99% system uptime and 100% compliance with CMMC Level 2 standards and NIST SP 800-171 for the protection of Controlled Unclassified Information. The performer must also deliver end-to-end logistics and test support, including rapid procurement of metals, specialized instrumentation, and GPS/PNT equipment; repair and maintenance of industrial machinery such as CNC machines, lathes, and Shuttlelift cranes; secure door-to-door shipment of sensitive items like electronic warfare jammers and Directed Energy equipment to CONUS and OCONUS locations—specifically Australia and New Zealand—with 98% on-time delivery and 100% compliance with ITAR and export regulations; and rapid deployment of emergency infrastructure such as portable generators and HVAC units within 48–72 hours of notification. Intellectual property rights are tightly defined, with the government requiring Government Purpose Rights to the OWMS database structure and transactional schemas, and unrestricted rights to all historical procurement data, including raw CSV exports on demand. Eligibility is restricted to entities that can certify compliance with at least one of three statutory conditions under 10 U.S.C. § 4022(d): significant participation by a nontraditional defense contractor or nonprofit research institution, exclusive involvement of small businesses or nontraditional contractors, or non-federal funding covering at least one-third of the project cost. Proposals must be submitted electronically as a single PDF no longer than 20 pages, excluding cost submissions and certifications, by 18:00 ET on 10 August 2026, and must include firm, fully priced milestones without optional or unpriced elements. Evaluation will focus on technical merit, capability to execute across all service domains, cost realism, and cybersecurity compliance, with performance measured against detailed Acceptable Quality Levels for each objective area. Participation

FA9101 Aedc Pkp Procrmnt Branch

POSTED

about 20 hours ago

DEADLINE

More opportunities from Department Of Defense → AVIATION SUPPLY CHAIN

Same awarding agency

INSULATION SLEEVING, EL

Solicitation # SPE4A1-26-T-2501

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 15 hours ago

DEADLINE

SCREW, CAP, SOCKET HE

Solicitation # SPE4A1-26-T-2498

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 15 hours ago

DEADLINE

BEARING, BALL, AIRFRA

Solicitation # SPE4A1-26-T-2499

Ball and Roller Bearing Manufacturing

POSTED

about 15 hours ago

DEADLINE

Packaging and Labeling Compliance ServicesThe contract requires the provision of comprehensive packaging and labeling services that strictly adhere to DLA RP001 and OSHA 29 CFR 1910.1200 standards, ensuring full compliance with hazardous communication requirements. Services include repackaging of materials, application of HazCom-compliant labels, and seamless integration with established quality inspection protocols to maintain product integrity and regulatory adherence throughout the process. The work is centered at Robins Air Force Base, Georgia, with the contractor responsible for coordinating all activities to meet the specified technical and safety benchmarks. This is a subcontract under NAICS code 561910, issued by the Aviation Supply Chain within the Department of Defense. The solicitation was posted on July 29, 2026, with a response deadline of August 6, 2026. All offerings must align with the operational environment at the designated place of performance and incorporate rigorous quality control measures. The contract emphasizes precision in labeling, safety compliance, and alignment with military logistics protocols, requiring vendors to demonstrate proven capability in handling regulated materials under federal standards.

Packaging and Labeling Services

POSTED

DEADLINE

Domestic and International Logistics / Transportation SupportThe contract seeks providers to deliver comprehensive domestic and international logistics and transportation services, with a core focus on FOB-origin coordination and the proper submission of ocean bills of lading to ensure seamless shipment tracking and documentation. Compliance with U.S.-flag vessel requirements mandated by the Buy American Act is a critical component, meaning all ocean freight must be carried on vessels flagged under the United States to meet federal procurement standards. The work will support military supply chain operations originating from Robins Air Force Base, Georgia, and will encompass both domestic movements and international shipments requiring adherence to strict regulatory frameworks. Subcontractors must be prepared to operate under the NAICS code 483111, which classifies this work under water transportation of freight, and will be responsible for end-to-end coordination of cargo from origin points through final delivery, ensuring all documentation, customs procedures, and compliance obligations are met without delay. The solicitation is open for responses until August 6, 2026, and is issued under the Department of Defense’s Aviation Supply Chain office, emphasizing the need for reliable, secure, and legally compliant logistics solutions to sustain defense-related operations. Failure to comply with U.S.-flag vessel mandates or to properly execute FOB-origin logistics will result in non-conformance and potential contract termination.

Deep Sea Freight Transportation

POSTED

DEADLINE

Threaded Insert (NSN 5305-01-678-6288, Part 114AS) Manufacturing and SupplyThe contract calls for the manufacture and delivery of threaded inserts identified as Part 114AS with the National Stock Number 5305-01-678-6288, requiring full compliance with military specifications including MIL-STD-1916 for quality assurance and DLA RP001 for packaging standards. All products must meet OSHA hazard communication requirements to ensure safe handling and documentation of chemical and material risks associated with production and use. The work is classified as a subcontract under NAICS code 332722, focused on screw machine products manufacturing, and performance is centered at Robins Air Force Base, Georgia, with a delivery destination code of 31098-1887. The solicitation was posted on July 29, 2026, and responses are due by August 6, 2026, with the contract managed under the Aviation Supply Chain division of the Department of Defense.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Government Invoicing and WAWF ReportingThe contract requires submission of electronic invoices and receiving reports through the Wide Area WorkFlow system to comply with DFARS 252.232-7006, ensuring timely and accurate payment processing for the Department of Defense. All documentation must be transmitted electronically via WAWF as a mandatory condition for reimbursement under this subcontract agreement. The work is performance-based at Hill AFB, Utah, with the NAICS code 541211 indicating professional, scientific, and technical services related to accounting, bookkeeping, and financial reporting activities. The solicitation was posted on July 29, 2026, with a response deadline of August 10, 2026, and is managed by the Aviation Supply Chain under the Department of Defense. There is no specified set-aside classification, and the contract is classified as a subcontract, meaning the respondent will be fulfilling obligations under a prime contract rather than directly engaging with the government. Complete adherence to WAWF requirements and timely submission of invoices and receiving reports are critical to maintaining payment eligibility and contractual compliance.

Offices of Certified Public Accountants

POSTED

DEADLINE

Hazardous Materials Compliance and Safety DataThis contract requires strict adherence to mercury restrictions and mandates the provision of Safety Data Sheets in full compliance with 29 CFR 1910.1200 and NAVSEA 5100-003D for all hazardous materials used in containment processes. The work is scoped under a subcontract classified under NAICS code 541620 and is managed by the Department of Defense through the Aviation Supply Chain office, with performance specifically designated at Hill AFB, Utah, 84056-5734. All submissions must meet federal and naval safety standards for chemical hazard communication, ensuring that personnel and environmental protections are fully upheld. Responses are due by August 10, 2026, with the solicitation posted on July 29, 2026, leaving a twelve-day window for submissions, and all parties must demonstrate clear understanding and capability to implement these regulatory requirements without exception.

Environmental Consulting Services

POSTED

DEADLINE

Military-Compliant Packaging and PalletizationThe contract requires precise packaging and palletization of precision washers in full compliance with Department of Defense standards including MIL-STD-129, ASTM D3951, and RP001, ensuring proper preservation, labeling, and GS1-128 barcoding throughout the process. All work must meet rigorous military specifications for durability, traceability, and uniformity to support logistics and distribution readiness. The packaging must be designed to protect components during storage and transit while enabling seamless scanning and inventory management through standardized barcoding protocols. Performance is to be conducted at Hill Air Force Base, Utah, with a response deadline of August 10, 2026, and the solicitation was posted on July 29, 2026. This is a subcontract opportunity under NAICS code 561910, issued by the Aviation Supply Chain within the Department of Defense. While no set-aside classification or point of contact is specified, the requirements emphasize strict adherence to military-grade packaging procedures to ensure compatibility with DoD supply chain systems.

Packaging and Labeling Services

POSTED

DEADLINE

Precision Metal Washer ManufacturingManufacture 362 precision flat washers to proprietary aerospace specifications for critical defense applications, with no existing technical data package, requiring advanced machining capabilities and specialized expertise in high-tolerance metal fabrication. The work must meet stringent aerospace standards and is intended for use in defense systems at Hill Air Force Base, Utah, with the contractor expected to independently develop and validate all manufacturing processes based on performance requirements and proprietary design intent. The contract is categorized as a subcontract under NAICS code 332722, issued by the Department of Defense through the Aviation Supply Chain, with a response deadline of August 10, 2026. Performance is solely tied to Hill AFB, and the contractor must demonstrate proven capability in producing non-standard, mission-critical components without reliance on documented technical data. All manufacturing, inspection, and quality control procedures must be fully documented and compliant with defense industry security and compliance protocols, though no specific set-aside or small business preference is indicated.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

INSERT, SCREW THREAD

Solicitation # SPE4A1-26-T-2497

The contract pertains to the procurement of 198 units of a screw thread insert identified by NSN 5325-00-786-6185 under solicitation SPE4A1-26-T-2497, with a delivery requirement of 80 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and apply in their revision state as of the solicitation issue or award date depending on acquisition size. Sampling must conform to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified; attributes are categorized as critical, major, or minor and assigned verification levels or AQLs accordingly. Configuration changes require formal engineering change proposals, and requests for deviations or waivers must be submitted. Documentation for source approval is mandated under RC001, and export control restrictions apply due to the presence of technical data subject to ITAR or EAR, prohibiting unlicensed export or disclosure to foreign persons, including foreign nationals within the U.S. Only DLA contractors with approved JCP certification, completed training on handling export-controlled data, and approved access via the DLA questionnaire are permitted to handle such data under DFARS 252.225-7048. Physical identification and removal of government markings from non-accepted items are required per RQ011 and RQ017. The contract is administered by the Aviation Supply Chain under the Department of Defense with performance to occur at Robins AFB, Georgia, and inquiries are directed to Jade Stringfield at the provided contact information.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Solicitation # SPE4A1-26-T-2496

The contract is for the procurement of 362 flat washers identified by NSN 5310-00-543-4804 and part number CVC754-548D17, supplied by Triumph Aerospace Structures, LLC. The item is classified as a critical application product, and no approved technical data package is currently available, rendering the specification proprietary or insufficient for competitive sourcing. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the controlling revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with ASTM D3951 and MIL-STD-129, subject to precedence by DLA requirements, and palletization must follow RP001 guidelines. Mercury and mercury-containing compounds are prohibited unless explicitly exempted for functional uses in batteries, instruments, or weapon systems, with portable mercury-containing devices requiring shockproof design and a secondary containment barrier per NAVSEA 5100-003D. Sampling for quality assurance must follow MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Zero non-conformances are required in sampled lots unless otherwise directed. The certificate of conformance is authorized unless suspended by a quality assurance letter. Delivery is FOB origin with a 146-day lead time, inspection and acceptance occur at destination, and the quantity variance is strictly zero percent. Packaging and labeling must reflect the specified unit of issue and quantity per unit pack, with all shipments directed to DLA Distribution Depot Hill in Hill AFB, Utah, under DLA transportation protocols. The original required delivery date is August 11, 2019, with a needed ship date of July 12, 2019.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE