Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Quality Assurance and Inspection Services

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract awards independent quality assurance and quality control services to ensure adherence to federal standards including FAR 52.246-12, AISC 360-16, and IBC-21 at Mammoth Cave National Park, with performance located in Mammoth Cave, Kentucky, 42259. These inspection services are critical to verifying compliance with structural integrity, material specifications, and construction practices governed by national codes and federal acquisition regulations. The work is classified under NAICS code 541330, indicating engineering and architectural services, and is structured as a subcontract within the Department of the Interior’s Ser East MABO(51000) organizational framework. The solicitation was posted on July 15, 2026, and the scope requires vigilant, impartial monitoring throughout project execution to confirm that all activities meet mandatory federal and industry benchmarks applicable to infrastructure within a federally protected national park.

General Info

Quality assurance services for federal infrastructure compliance at Mammoth Cave National Park under FAR, AISC, and IBC standards.

Agency

Department Of The Interior → Ser East MABO(51000)View Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

Mammoth Cave, KY, 42259, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 15

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of The Interior → Ser East MABO(51000)

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of The Interior → Ser East MABO(51000)

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Independent QA/QC and inspection services to ensure compliance with federal standards including FAR 52.246-12, AISC 360-16, and IBC-21 at Mammoth Cave National Park.

Similar Contracts

Same NAICS industry code

Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide Construction Management services through an indefinite-delivery, indefinite-quantity contract for major construction projects across various phases including planning, design, construction, and closeout. The scope encompasses support for multiple delivery methods such as Design Build, Progressive Design Build, and other alternative delivery approaches, with an emphasis on ensuring projects adhere to approved schedules, budgets, and quality standards. This contract will serve as a vehicle for procuring CM services on an as-needed basis to support the Port’s evolving infrastructure initiatives. The contract is categorized under NAICS code 541330 for Architectural, Engineering, and Related Services and is managed by the Port of Seattle’s Construction Management office. Primary point of contact for inquiries is Hala Rabbo, with additional support available through Project Manager Ann Davidson. The solicitation was posted on July 21, 2026, and interested parties can access further details via the Port’s official portal. There is no set-aside classification indicated, and performance is expected to occur at various locations under the Port’s jurisdiction.

Construction Management

POSTED

about 9 hours ago

DEADLINE

Retro-Commissioning, TAB, Controls, and Regulatory Support IDIQThe consultant will deliver retro-commissioning, test/adjust/balance, controls, and regulatory support services across Seattle-Tacoma International Airport’s facilities and infrastructure systems, operating within a 24/7/365 environment that demands continuous reliability and safety. The work centers on identifying and correcting deficiencies in mechanical, HVAC, plumbing, lighting, Direct Digital Controls, smoke control, and fire protection systems to enhance performance, energy efficiency, occupant comfort, system longevity, and compliance with applicable regulations. All services will be executed through Service Directives and require close collaboration with Aviation Facilities and Infrastructure to meet defined deliverables and operational standards. The contract is structured as an Indefinite-Delivery/Indefinite-Quantity agreement under NAICS code 541330, managed by the Port of Seattle’s Aviation Facilities & Infrastructure division. Primary point of contact is Jason Gates, with Jim Farris serving as Project Manager; inquiries and communications should be directed through their provided contacts. The solicitation was posted on July 21, 2026, with performance expected to take place at the airport. There is no specified set-aside type, and the contract is designed to support ongoing and evolving needs across the airport’s critical infrastructure systems.

Aviation Facilities & Infrastructure

POSTED

about 9 hours ago

DEADLINE

Safety and Code Compliance InspectionThe Texas Department of Transportation is seeking a qualified third-party inspector to conduct a comprehensive evaluation of structural, electrical, and fire code compliance for a project prior to final acceptance. This subcontract requires the vendor to perform detailed inspections to ensure all systems and components meet current safety and regulatory standards, with the goal of verifying readiness for occupancy or operational use. The inspection must be thorough and documented to provide verifiable evidence of compliance across all specified domains. The solicitation was posted on July 21, 2026, with a firm deadline for responses on September 2, 2026, at 6:00 PM. The contract falls under NAICS code 541330, which categorizes it as architectural, engineering, and related services. The work will be performed in Texas, though specific location details are not provided. Interested parties can access the full solicitation through the Texas SmartBuy portal, and the procurement is open to eligible subcontractors without a designated small business set-aside.

Texas Department of Transportation

POSTED

about 11 hours ago

DEADLINE

in about 1 month

IFB 26-00409, Veeder Root System Upgrade ProjectHampton Roads Transit is soliciting bids for the procurement and installation of Veeder-Root TLS450 Plus fuel and lubricant monitoring systems across its facilities in Hampton Roads, Virginia. The project requires qualified contractors to furnish, install, configure, test, and commission the systems to ensure accurate tracking and management of fuel and lubricant usage. The solicitation, identified as IFB-124728 under the title IFB 26-00409, was posted on July 20, 2026, and bids must be submitted by August 20, 2026, at 7:00 PM EST. The work is to be performed entirely within the Hampton Roads region, and all responses must be submitted through the designated online vendor portal. Interested parties should direct inquiries to Fevrier Valmond, the designated point of contact, via email at fvalmond@hrtransit.org or phone at 757-222-6000.

Hampton Roads Transit

POSTED

about 17 hours ago

DEADLINE

in about 1 month

Quality Inspection & Compliance MonitoringThe contract pertains to third-party inspection services aimed at verifying the quality and compliance of crack sealing operations on transportation infrastructure, with specific focus on depth, width, and adhesion properties. The inspections must align with technical standards set by the Texas Department of Transportation and AASHTO, ensuring that all work meets rigorous performance and durability requirements. Comprehensive documentation and detailed reporting are required as part of the quality assurance process to validate compliance and facilitate ongoing maintenance oversight. This subcontract is issued by the Texas Department of Transportation under NAICS code 541330, which categorizes it under architectural, engineering, and related services. The solicitation was posted on July 20, 2026, with a response deadline of August 11, 2026, and is accessible via the Texas SmartBuy portal. Performance of the work is expected to occur across Texas state-maintained roadways, though specific locations are not detailed. The contract emphasizes objective evaluation and transparent reporting to support state-level infrastructure integrity and regulatory compliance.

Texas Department of Transportation

POSTED

about 17 hours ago

DEADLINE

Roadway Inspection and Quality AssuranceThe contract titled Roadway Inspection and Quality Assurance requires the performance of inspections to ensure that all maintenance operations on Texas roadways meet the technical and safety standards established by the Texas Department of Transportation. These inspections focus on verifying surface quality, the appropriateness and condition of materials used, and adherence to safety protocols during execution of work. The effort is critical to maintaining infrastructure integrity and public safety across the state’s transportation network. The contract is structured as a subcontract and falls under NAICS code 541330, indicating it involves architectural, engineering, and related services. The solicitation was posted on July 20, 2026, with a response deadline of August 12, 2026, at 4:00 PM Central Time. All performance is expected to occur within Texas, though specific cities or locations are not detailed in the provided information. The contract is managed by the Texas Department of Transportation under its Texas organizational unit, with no set-aside provisions identified. Interested parties must submit responses through the designated portal at the provided Texas SmartBuy link, and all qualified subcontractors are expected to comply fully with TxDOT’s regulatory and operational guidelines throughout the inspection process.

Texas Department of Transportation

POSTED

about 18 hours ago

DEADLINE

Inspection and Quality Assurance SupportThe contract involves providing on-site inspection and quality assurance support for infrastructure projects under the Texas Department of Transportation, focusing on verifying work quality, documenting completed tasks, and assisting the prime contractor during TxDOT acceptance inspections. This subcontract requires personnel to be physically present at project sites to ensure compliance with technical standards, maintain accurate records of construction progress, and serve as a liaison during official inspections to facilitate smooth acceptance processes. The opportunity is open for submissions until August 12, 2026, and is classified under NAICS code 541330, which pertains to engineering services. It is positioned as a subcontract and does not specify any set-aside status or organizational type restrictions. The place of performance is unspecified in the posted data but will be tied to active TxDOT projects across the state. Interested parties must access the full solicitation through the provided Texas SmartBuy portal link to understand scope expectations, deliverables, and contract terms.

Texas Department of Transportation

POSTED

about 18 hours ago

DEADLINE

Inspection and Quality Control SupportThis contract seeks support for inspection and quality control activities related to field verification of material placement, compaction, and grading on transportation projects to ensure full compliance with Texas Department of Transportation standards. The work involves on-site monitoring and documentation to verify that construction practices meet engineered specifications and regulatory requirements, with a primary focus on ensuring structural integrity and long-term performance of roadways and related infrastructure. All tasks must be performed in alignment with TxDOT protocols and may include testing, reporting, and coordination with project teams to resolve non-conformances in a timely manner. The opportunity is structured as a subcontract under NAICS code 541330, indicating it relates to engineering services, and is posted on the Texas SmartBuy portal with a response deadline of August 12, 2026. While the solicitation number is not provided, the contract is managed by the Texas Department of Transportation and will be performed somewhere within the state of Texas without a specified city or zip code. The scope does not indicate any set-aside classifications, and there is no designated point of contact listed, suggesting that all inquiries should be directed through the provided portal link. Interested parties must submit their proposals before the deadline to be considered for award.

Texas Department of Transportation

POSTED

about 18 hours ago

DEADLINE

Project Inspection and Quality Control ServicesThe contract seeks third-party inspection and quality control services to ensure compliance with Georgia Department of Transportation standards and to evaluate the workmanship quality of project activities. The scope focuses on verifying that all construction and related efforts meet established technical, safety, and performance benchmarks set by GDOT, with the inspector acting as an independent verifier of adherence to specifications. This is classified as a subcontract under NAICS code 541330, indicating professional, scientific, and technical services related to architectural and engineering activities. The opportunity was posted on July 20, 2026, with a response deadline of August 11, 2026, and the place of performance is within the state of Georgia, though specific locations are not detailed. The contract is managed by the Georgia Department of Transportation, and all proposals must be submitted through the designated state procurement portal.

Department of Transportation

POSTED

about 18 hours ago

DEADLINE

Electrical Engineering Design Services for Parks InfrastructureThe City of Issaquah is seeking qualified firms to provide professional electrical engineering design services for public park infrastructure, focusing on lighting, power distribution, and control systems. The scope requires full compliance with Washington State electrical codes and standards, and all deliverables must be stamped by a licensed Professional Engineer (PE) to ensure regulatory adherence and public safety. This subcontract opportunity is open to firms capable of delivering detailed, code-compliant designs that support the city’s infrastructure improvements, with a strong emphasis on reliability, energy efficiency, and long-term maintainability of park systems. The solicitation was posted on July 20, 2026, and responses are due by August 14, 2026, at 11:00 PM Eastern Time. The NAICS code 541330 identifies this as engineering services, specifically electrical engineering, and the contract is classified as a subcontract under the city’s broader public works initiative. While no set-aside type is specified, applicants must be prepared to meet all applicable state and local requirements for public infrastructure projects. Proposals should demonstrate prior experience with municipal park projects, familiarity with Washington State regulatory frameworks, and the ability to coordinate with other design and construction teams to ensure seamless integration of electrical systems into park environments.

City of Issaquah

POSTED

about 18 hours ago

DEADLINE

RFQ PARKS- On-Call Electrical Engineering Consultants for Parks & Recreation ProjectsThe City of Issaquah’s Parks and Community Services Department is soliciting qualified electrical engineering consultants on an on-call basis to support a variety of electrical engineering needs for parks and recreation projects. These services may range from supporting larger capital improvements to addressing one-time or urgent engineering requirements, with work being issued through individual task orders that align with the format outlined in Professional Services Agreement—Attachment C. The City plans to select up to two firms to ensure broad expertise and flexibility in addressing diverse project demands, though no minimum volume of work is guaranteed and the timing and extent of assignments will vary significantly. Interested firms must respond by the deadline of August 14, 2026, with all submissions directed to the designated point of contact, Robin Spear, at the City of Issaquah. The solicitation is open to qualified electrical engineering consultants capable of delivering professional services within Washington State, particularly in support of municipal parks and recreation infrastructure. There is no set-aside designation specified, and while no guaranteed work volume exists, selected firms will be contacted as needs arise, with each task order independently authorized and managed. Proposals should demonstrate relevant experience, capacity, and ability to meet the City’s technical and operational expectations across a range of electrical engineering applications.

City of Issaquah

POSTED

about 18 hours ago

DEADLINE

Estimating and Constructability Review ServicesThe contract is for estimating and constructability review services to support job orders under a Job Order Contracting (JOC) framework, enabling time and materials and unit price billing methods. The work involves preparing detailed cost estimates and conducting technical reviews to ensure designs are practical, efficient, and feasible for construction, directly supporting project execution under the JOC structure. The solicitation is issued by Midwestern State University in Texas under NAICS code 541330 for architectural and engineering services and is classified as a subcontract opportunity with no set-aside provisions. Proposals are due by August 13, 2026, and the contract will be managed through the Texas SmartBuy portal with performance expected to occur across various locations within the state, though specific delivery sites are not identified.

Midwestern State University

POSTED

about 18 hours ago

DEADLINE

More opportunities from Department Of The Interior → Ser East MABO(51000)

Same awarding agency

53--Equipment Design and Installation - Fort Pulaski NThe solicitation for Equipment Design and Installation at Fort Pulaski National Park, identified by solicitation number 140P5126Q0041, has been amended to extend the deadline for submitting quotes to July 20, 2026, at 1:00 PM EDT. Originally posted on July 10, 2026, this combined solicitation is set aside entirely for small businesses under the SBA’s Total Small Business Set-Aside provision, with the NAICS code 332510 indicating the work falls under boiler and tank manufacturing. The opportunity is managed by the Department of the Interior through the Ser East MABO office located in Atlanta, Georgia, with performance required in Savannah, Georgia, at the historic site of Fort Pulaski. Edward Dingle serves as the primary point of contact, reachable via email and phone, and all submissions must be received by the new deadline to be considered. The contract is accessible through the SAM.gov platform for qualified small business vendors.

Hardware Manufacturing

POSTED

DEADLINE

S--HAZARD FUEL REDUCTION-TREE HEALTH PROJECThe National Park Service intends to award a sole-source, firm fixed-price contract to F.A. Bartlett Tree Experts for hazardous fuels reduction and tree health services at Charles Pinckney National Historic Site, citing the irreplaceable nature of the site’s 250-year-old live oaks and Bartlett’s unique, long-standing expertise developed through prior work on the property. Bartlett has already created a comprehensive, individualized treatment plan for all 298 trees onsite, making them the only contractor capable of executing the work without risking damage to these historic resources or duplicating extensive prior research. The project includes removal of invasive vines, TRAQ-certified pruning, and reduction of fire fuels such as undergrowth, small trees, and duff layers to create defensible space, improving visitor safety and reducing liability. The timing is critical, as 2026 marks Charleston’s Freedom 250 commemorations, heightening the public and cultural importance of preserving these living landmarks. Due to Bartlett’s proven safety record, site-specific knowledge, and inability of any other vendor to replicate their work without significant cost and delay, the government is justified in selecting them under FAR Part 6.302-1. The contract falls under NAICS code 561730 for landscaping services, with a standard size of $9.5 million, and no solicitation will be issued—this notice serves solely to document the intent to award without competition. All communications regarding the notice must be directed to the designated point of contact, and no bidder’s list will be maintained.

Landscaping Services

POSTED

DEADLINE

Stainless Steel Tubing and Metal Fabrication SupplyThe contract involves the supply of ASTM A554 Grade MT 304L stainless steel tubing for use in structural and ornamental applications at Mammoth Cave National Park, with a delivery location identified by the zip code 42259. The material must be accompanied by certified mill test reports to ensure compliance with specified standards and quality requirements. This is classified as a subcontract under NAICS code 332312, which pertains to metal fabrication, and is administered by the Department of the Interior through the Ser East MABO office. The solicitation was posted on July 15, 2026, and no set-aside provisions or specific organizational type details are indicated. The project focuses on sourcing high-quality corrosion-resistant stainless steel tubing suitable for outdoor, high-performance environments, with delivery and certification as critical components of the deliverables.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Underground Construction Logistics and Material HandlingThe contract involves the mobilization, staging, and transportation of materials and equipment into restricted-access underground sites within Mammoth Cave National Park, requiring specialized logistics to operate in sensitive and confined subterranean environments. All activities must comply with stringent safety, environmental, and access protocols established by the National Park Service, as the work occurs within a federally protected area with limited entry points and strict operational controls. The performance location is centered in Mammoth Cave, Kentucky, with all services rendered onsite under conditions that demand precision, coordination, and adherence to preservation guidelines. The contract is classified under NAICS code 488999 for other support activities for transportation and is structured as a subcontract managed by Ser East MABO, an office within the Department of the Interior. It does not specify a set-aside type or solicitation number, indicating it is likely part of a larger prime contract. The work demands experienced personnel familiar with underground mining or cave logistics, equipped with the proper tools and procedures to handle heavy or delicate equipment without disrupting the natural cave system. All operations must be conducted with minimal environmental impact, and compliance with National Park regulations is non-negotiable, making this a high-reliability, low-tolerance logistics endeavor.

All Other Support Activities for Transportation

POSTED

DEADLINE

Confined-Space Construction Safety Planning and ComplianceThe contract entails the development and implementation of a Site-Specific Safety Plan tailored for underground construction activities at Mammoth Cave, ensuring full compliance with NPS RM-50B Chapter 21 requirements. This plan must address all hazards associated with confined and underground spaces, with specific focus on radon gas monitoring to protect workers and ensure ongoing environmental safety. The plan must also include detailed procedures for emergency egress, ensuring rapid and safe evacuation protocols are in place under all conditions. Work must be executed with strict adherence to federal safety standards and operational guidelines mandated by the Department of the Interior. The subcontract is categorized under NAICS code 541690, indicating it involves other scientific and technical consulting services, and is tied to the Ser East MABO office. The performance location is clearly defined as Mammoth Cave, Kentucky, with a postal code of 42259, situating all activities within this sensitive and historically significant underground environment. The project is scheduled to be posted on July 15, 2026, and all deliverables must reflect a thorough understanding of the unique challenges posed by subterranean work, including atmospheric risks, logistical constraints, and regulatory oversight from the National Park Service. Successful execution requires integrated safety planning, technical expertise in environmental monitoring, and coordination with park management to maintain both worker safety and site preservation.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Structural Steel Fabrication and Welding for Underground StructuresThe contract involves the fabrication and installation of corrosion-resistant stainless steel components, including railings and support frames, specifically for use in confined underground areas at Mammoth Cave National Park. The work requires specialized welding and fabrication techniques suited for the unique challenges of subterranean environments, where moisture, limited access, and structural constraints demand high precision and durable materials. All components must meet stringent standards for longevity and safety in a sensitive natural setting, ensuring minimal environmental impact and long-term structural integrity. The contract, classified under NAICS code 238213 for structural steel fabrication and welding, is a subcontract awarded by the Department of the Interior through its Ser East MABO office. Performance is strictly limited to the Mammoth Cave area with a ZIP code of 42259, and the solicitation was posted on July 15, 2026. While no set-aside details are provided, the work is confined to a federally managed site, requiring compliance with all National Park Service regulations and safety protocols for underground operations. Access, logistics, and execution must account for the delicate ecological and historical context of the cave system.

POSTED

DEADLINE

99--Replace Interpretive Signs for NPS, Big South ForkThe National Park Service is seeking qualified small businesses to replace interpretive signs at the Big South Fork National River and Recreation Area in Oneida, Tennessee, under a small business set-aside procurement assigned solicitation number 140P5126Q0038. This is a combined synopsis/solicitation issued as a Request for Quote under simplified acquisition procedures, with awards based on the lowest price technically acceptable standard without discussions, as outlined in FAR 13.106-2. The contracting activity is administered by the NPS Contracting Operations East office in Atlanta, GA, and the procurement is strictly limited to small businesses certified under NAICS code 339950, with a maximum employee threshold of 500. All offerors must maintain an active registration in SAM.gov with a valid UEI number and be self-certified in that NAICS code, while also ensuring they have no delinquent federal debts or debarment status. The contract involves the fabrication and delivery of complete National Park Service UniGuide Visitor Information Sign System components, including hardware and UV-resistant, vandal-resistant fiberglass embedment panels as detailed in Attachment A, with each line item (LIN) requiring a fully assembled system including frames, posts, stands, baseplates, and hardware. Items must conform precisely to VIS Manual Revision 3, utilizing specified materials such as hot-dip galvanized steel, uncoated weathering steel, and aluminum, with mounting configurations including wall, upright, cantilever, and tripod systems. All products must be delivered F.O.B. Destination to the East Rim Facilities Management Shop in Oneida, TN, no later than October 31, 2026, following a 120-day performance window beginning upon notice to proceed. Packaging and labeling must comply strictly with LIN-specific requirements, including individual item labeling, a cross-referenced packing list, and confirmation of completeness for each system. The government retains the right to inspect materials at any stage—fabrication, shipping, or delivery—and will reject any nonconforming items, requiring contractor removal and replacement at no extra cost. Invoicing must be done electronically via the U.S. Department of the Treasury’s IPP system with a contractor invoice attached, and payments are due Net 15. The contract includes mandatory flow-down clauses covering ethics, whistleblower rights, labor standards, accelerated payments to small business subcontractors, Buy American requirements, and combating trafficking in persons. Proposals are due by email to Jade_byn

Sign Manufacturing

POSTED

DEADLINE

Z--Provide Replacement of Heating, Ventilation, & AirThe contract solicitation for the replacement of heating, ventilation, and air conditioning systems has been amended to remove the small business set-aside requirement, transitioning from a Service-Disabled Veteran-Owned Small Business Set-Aside to an unrestricted competition, allowing all eligible entities to compete. The proposal submission deadline has been extended to August 3, 2026, at 1:00 p.m. EDT, and proposals must be submitted exclusively via email to the Contracting Officer at edward_dingle@ios.doi.gov. Site visit details are now provided in Attachment 0015, replacing prior guidance, and offerors are encouraged to coordinate visits through the Contracting Officer. The period of performance will be established based on the actual date of contract award, though preliminary dates reference a six-month window from June 22, 2026, to June 21, 2027, with delivery expected by June 21, 2027. Work is to be performed at Fort Sumter and Fort Moultrie National Historical Park in Charleston, South Carolina, and encompasses the removal of visible contaminants from HVAC interior surfaces across multiple construction divisions while adhering to NFPA, SMACNA, ASHRAE, ASTM, and OSHA standards. Offerors must comply with the Buy American Act, Davis-Bacon Act, and requirements for combating trafficking in persons, and are required to submit performance and payment bonds, a certified construction safety plan, and evidence of liability insurance before receiving a Notice to Proceed. Proposal evaluation is based on pass/fail gates: balanced pricing, technical acceptability, and past performance involving three successful projects on historical structures within the last five years. Only technically acceptable proposals will be considered for award, with selection going to the lowest priced compliant offer. All offerors must maintain an active SAM registration with completed representations and certifications, provide their UEI and CAGE code, and reference all solicitation amendments in their submissions. The Contracting Officer, Edward Dingle, Jr., will administer the contract, with technical direction and surveillance performed by a Contracting Officer’s Representative to be designated. Quality control demands submission of a certified CQC plan prior to pre-construction, daily reports, and three certified copies of all test and inspection results. Materials must be delivered in original sealed containers with proper labeling meeting specific durability, sizing, and attachment requirements, and all packaging waste must be recycled. Payroll records, including subcontractor data, must be submitted weekly via WH-347

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Tree Work for NPS, Ninety-Six NHSThe National Park Service is seeking qualified small businesses to perform tree work services at the Ninety-Six National Historic Site in South Carolina under a combined synopsis and solicitation issued as a Request for Quote. This procurement is exclusively reserved for small businesses certified under NAICS code 561730 with a size standard of $8 million in annual revenue, and all offerors must maintain an active SAM.gov registration with a valid UEI number and self-certify in the Representations and Certifications section. The work involves natural resources and conservation tree thinning, and the resulting contract will be awarded on a lowest price technically acceptable basis under simplified acquisition procedures with no discussions. Interested parties must submit quotations via email to Jade Bynum by 5 p.m. EDT on Friday, July 31, 2026, and are required to confirm their eligibility, including absence of delinquent federal debt or debarment. A mandatory site visit is scheduled for Wednesday, July 22, 2026, at 10 a.m. EDT at the flagpole near the parking lot, and all questions must be submitted in writing by 5 p.m. EDT on July 23, 2026, with no oral or late submissions accepted.

Landscaping Services

POSTED

DEADLINE

Unable to Retrieve Subcontract OpportunitiesThe contract opportunity titled "Unable to Retrieve Subcontract Opportunities" was posted on July 13, 2026, with a response deadline of August 13, 2026, at 7:00 PM. It is classified as a subcontract under a Total Small Business Set-Aside as defined by FAR 19.5, indicating that only small business concerns are eligible to compete. The acquiring agency is the Department of the Interior, specifically under Ser East MABO(51000), though no NAICS code, point of contact, or specific place of performance details are provided. The office address and performance location fields are incomplete, and no additional information about subcontracting opportunities or specific requirements could be retrieved due to technical errors during data access. The only available reference is a link to the SAM.gov workspace for further inquiry.

POSTED

DEADLINE

MACA-REPAIR OF PEDESTRIAN BRIDGE FOUNDATThe contract solicitation EO-14398 titled MACA-REPAIR OF PEDESTRIAN BRIDGE FOUNDAT is a total small business set-aside under the Small Business Administration, with a NAICS code of 238990 for other specialty trade contractors. It is issued by the Department of the Interior through the Ser East MABO office located in Atlanta, Georgia, and is open for responses until August 13, 2026. The primary point of contact is Arcoiris Cuetara-Higa, reachable via email at arcoiris_cuetara-higa@nps.gov, with no listed phone number provided. The place of performance details are unspecified, and the solicitation is posted on SAM.gov with a public link for further access. All work must be performed by a small business as defined by federal regulations, and responses must be submitted before the stated deadline to be considered.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Access Denied: Unable to Retrieve Prime Contract DataAccess to the prime contract data required for subcontract decomposition has been denied due to authentication failure, preventing retrieval of the Statement of Work, CLINs, and associated metadata. The subcontract is linked to the Department of the Interior through Ser East MABO(51000) with a NAICS code of 999999, and was posted on July 7, 2026, but no solicitation number, set aside details, organizational type, or performance location information is available. The point of contact is unspecified, and the office address contains no populated fields. The contract can be viewed online via the provided SAM.gov link, but without valid credentials, critical contract components remain inaccessible, halting further analysis or execution.

POSTED

DEADLINE