Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Quality Assurance and Inspection Services

Active

Federal

Response Deadline08/14/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract requires comprehensive quality assurance and inspection services adhering strictly to MIL-STD-1916 or ASQ H1331 standards, utilizing AQL sampling methods with a zero non-conformance acceptance criterion. All inspections, both in-process and final, must ensure absolute conformity to established quality thresholds, leaving no room for defects or deviations. The work is structured as a subcontract under a Total Small Business Set-Aside designation, reserved exclusively for small businesses certified by the SBA, with the NAICS code 811219 indicating repair and maintenance services. The solicitation was posted on July 30, 2026, with responses due by August 14, 2026, and is managed by the Strategic Acquisition Program Directorate within the Department of Defense. Performance location and specific contact details are not provided, but the contract can be accessed via the referenced DIBBS portal.

General Info

Small business subcontract for zero-defect quality inspections per MIL-STD-1916 or ASQ H1331, due August 14, 2026.

Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATEView Agency

NAICS

811219 - Other Electronic and Precision Equipment Repair and MaintenanceView NAICS

Place of Performance

US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 30

subcontract

Response DeadlineAug 14

Submission deadline

Response Deadline

08/14/2026, 05:00:00 PM UTCin 13 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

In-process and final inspection per MIL-STD-1916 or ASQ H1331 with AQL sampling and zero non-conformance acceptance.

Similar Contracts

Same NAICS industry code

Inspection and Acceptance SupportThis contract requires full compliance with government inspection standards at the destination, where any defect or discrepancy will result in rejection with zero tolerance. All shipments must be meticulously prepared and documented to ensure flawless passage through official inspections, underscoring the critical need for precision in packaging, labeling, and adherence to regulatory protocols. The work falls under NAICS code 811219 and is structured as a subcontract under the Department of Defense’s Land Supply Chain, with performance required at New Cumberland, Pennsylvania, 17070-5002. Responses must be submitted by August 10, 2026, and the solicitation is open for bids through the DIBBS platform. The contract emphasizes strict enforcement of quality control throughout the entire supply and shipment process, leaving no room for error in meeting military or federal inspection requirements. Participants must demonstrate proven capability in handling sensitive logistics under rigorous compliance standards, with failure to meet specifications leading to immediate non-acceptance. Though no set-aside information or point of contact is provided, the place of performance and agency designation confirm the mission-critical nature of the work within the DoD’s logistical framework. Bidders are expected to possess the infrastructure and expertise to guarantee 100 percent readiness for inspection without delays or rework.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Quality Inspection and Government Acceptance SupportThe contract requires comprehensive quality inspection services to verify that all products meet specified technical requirements through first-article and batch inspections, ensuring conformance before delivery. It includes active support for government inspection activities at the point of origin, in strict alignment with Federal Acquisition Regulation 52.246-2, which governs government acceptance of supplies. This work is critical to confirming product reliability and regulatory compliance prior to acceptance by the Department of Defense. This is a subcontract under a Total Small Business Set-Aside, with the NAICS code 811219 indicating it is targeted toward businesses classified under Other Personal and Household Goods Repair and Maintenance. The opportunity was posted on July 30, 2026, with a response deadline of August 14, 2026, and is managed by LSO Combat Vehicles and Armament, a division within the Department of Defense. The performance location is not specified, but all inspection activities must be conducted at the vendor’s origin site to facilitate direct government oversight.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Quality Assurance and Inspection ServicesThe contract entails the implementation and ongoing maintenance of a quality inspection system aligned with AS9003 or ISO 9001 standards to ensure rigorous adherence to aerospace and defense quality requirements. This includes performing comprehensive in-process and final inspections across all relevant production phases to verify compliance with technical specifications and established quality criteria. The contractor must also provide direct support to Government Quality Assurance Representatives (QARs) in accordance with FAR 52.246-11, facilitating oversight activities and ensuring all inspection records, documentation, and corrective actions meet federal contractual obligations. The work is designated as a Service-Disabled Veteran-Owned Small Business Set-Aside under NAICS code 811219 and is structured as a subcontract under the Fluid Handling Division of the Department of Defense. Performance is required to be conducted in San Diego, California, with a response deadline of August 10, 2026, and the solicitation was posted on July 29, 2026. The contractor is expected to demonstrate proven capability in delivering high-integrity inspection services within a regulated defense environment, with a focus on precision, traceability, and collaboration with government oversight entities.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Marking and Bar-Coding ServicesThe contract seeks qualified contractors to apply durable bare-item markings and 2D Data Matrix codes in strict compliance with MIL-STD-129 and RQ017 requirements for the identification of items during shipment and storage. These markings must ensure long-term readability and accuracy across all phases of logistics handling to meet Department of Defense standards for traceability and inventory management. The work is classified as a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, and falls under NAICS code 811219 for other industrial and commercial repair and maintenance services. The solicitation was posted on July 29, 2026, with responses due by August 6, 2026, and the performance location is specifically designated as New Cumberland, Pennsylvania, zip code 17070-5002. The contracting activity is managed by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense, and the procurement is intended to support military supply chain operations through precise and standardized marking procedures. All bidders must be prepared to demonstrate technical compliance with the referenced military standards and the capacity to deliver consistent, high-quality marking services on schedule.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Quality Assurance and Inspection ServicesThe contract entails providing comprehensive quality assurance and inspection services for RF cable assemblies, ensuring adherence to strict acceptance quality levels including Critical defects at 0.1, Major defects at 1.0, and Minor defects at 4.0, with additional zero-defect verification required where specified. Inspections must cover all stages of production—incoming materials, in-process manufacturing, and final product verification—to guarantee compliance with technical and performance standards. This subcontract is designated as a Total Small Business Set-Aside under SBA regulations, reserved exclusively for small businesses as defined by the Small Business Administration. The North American Industry Classification System code 811219 categorizes the work under other personal and household goods repair and maintenance, reflecting the specialized nature of the inspection services. The solicitation was posted by the ASC Commodities Division under the Department of Defense, with responses due by August 11, 2026, and the work is expected to be performed under the authority and oversight of the federal procurement system.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

MIL-STD-129 Marking and Barcoding ServicesThe contract requires permanent marking and barcoding of bare items and containers in strict compliance with MIL-STD-129, ensuring all required military documentation standards are met. This includes the accurate application of contract-specific identifiers such as the contract number, NAWC CAGE code, and part number on each component and container to enable traceability and logistics readiness across the defense supply chain. The work must be executed with precision to ensure full adherence to federal military labeling protocols, with no flexibility in data content or application method. This subcontract opportunity under the NAICS code 811219 is managed by the Department of Defense’s Nuclear Reactor Program and is open for response until August 7, 2026. The solicitation, posted on July 28, 2026, does not specify a set-aside category or point of contact, and performance location details are not provided. Interested parties must submit proposals via the DIBBS platform using the provided link, ensuring all technical and compliance requirements for MIL-STD-129 are fully addressed in their submissions.

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Counterfeit Electronic Parts Detection SystemThe contract requires the implementation of comprehensive counterfeit parts detection and avoidance processes aligned with DFARS clause 252.246-7007, ensuring full traceability and reporting capabilities across all components, including mechanical parts integrated into electronic systems. The scope demands robust systems to identify, isolate, and document potential counterfeit items throughout the supply chain, with strict adherence to government-mandated standards for provenance verification and reporting procedures. All processes must be scalable, auditable, and capable of handling both electronic and mechanical elements to mitigate risk across the entire product assembly lifecycle. The contract is structured as a subcontract under the Department of Defense, specifically managed by the ASC Commodities Division, with a response deadline of August 3, 2026, and a posted date of July 28, 2026. The NAICS code 811219 indicates a focus on repair and maintenance services, suggesting the contractor may be responsible for sustaining or upgrading existing detection infrastructure. Performance obligations are not geographically restricted within the provided data, but compliance with federal defense regulations is mandatory. The contract emphasizes end-to-end accountability, requiring detailed documentation and transparent reporting mechanisms to ensure DoD supply chain integrity and national security objectives.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Post-Warranty Maintenance and Repair Services for PFT EquipmentThis contract provides ongoing maintenance, troubleshooting, calibration, and repair services for PFT equipment after the manufacturer’s warranty has expired, including the option for preventive maintenance agreements to ensure continued operational reliability. The services are intended to support the long-term functionality of the equipment through scheduled inspections, timely repairs, and technical support, minimizing downtime and extending equipment life. The contract is classified as a subcontract under a Small Business Set Aside, specifically reserved for small businesses as defined by the SBA, with the NAICS code 811219 indicating it falls under other commercial and industrial machinery and equipment repair and maintenance. It is managed by the Department of Veterans Affairs through the 247-NETWORK Contract Office 7, and while specific performance locations and contact details are not provided, the work is likely to be performed at VA facilities nationwide where PFT equipment is in use.

247-NETWORK Contract Office 7 (36C247)

POSTED

DEADLINE

Inspection and Acceptance Support at OriginThe contract requires support for government inspection activities at the origin, in accordance with FAR 52.246-2, focusing on the preparation of all necessary documentation and close coordination with the Defense Logistics Agency Quality Assurance Representative to ensure compliance with federal procurement standards. All tasks must be executed to facilitate timely and accurate acceptance of supplies prior to shipment, with full adherence to quality control protocols outlined in the regulation. The work is tied to a specific place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating the physical location where inspection support services must be delivered. The contract is classified as a subcontract under the NAICS code 811219, and it was posted on July 27, 2026, with a response deadline of August 4, 2026. It is issued by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense and relates to support services for government inspection, not direct procurement. The nature of the work implies involvement with defense supply chain logistics, requiring precise administrative and procedural alignment with federal inspection frameworks. No set-aside designation or specific point of contact is provided, and the primary expectation is seamless execution of documentation and coordination duties to enable smooth government acceptance processes.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Quality Inspection & Sampling Services

ASC COMMODITIES DIVISION

POSTED

DEADLINE

MIL-STD-129 Compliant Marking and Data Matrix LabelingThe contract requires precise application of MIL-STD-129-compliant markings, including barcodes, data matrix symbols, and Unit of Issue labels on all packaging and containers to meet Department of Defense shipment identification standards. All labeling must be executed accurately to ensure traceability, compliance, and readiness for military logistics operations, with strict adherence to the technical specifications outlined in the standard. The work must be performed in alignment with DoD requirements to support timely and error-free delivery of materiel. This is a subcontract opportunity under NAICS code 811219, with a performance location at Hill AFB, Utah, 84056-5734. The solicitation was posted on July 27, 2026, and responses are due by August 4, 2026. The contracting activity is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, and all work must be completed to support military supply chain integrity without deviation from established labeling protocols.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Military Labeling, Marking, and BarcodingThe contract requires strict adherence to MIL-STD-129 for the application of compliant labeling and barcoding on military equipment and supplies, including the use of data matrix codes and proper hazardous materials labeling to ensure accurate tracking and safety compliance. All labeling must meet federal military standards for durability, readability, and data accuracy in operational environments. The work is scoped as a subcontract under the Department of Defense, with performance required at Tracy, California, 95304-5000, and the solicitation is open for responses until August 7, 2026. The North American Industry Classification System code 811219 indicates the service relates to other personal and household goods repair and maintenance, suggesting the context involves preparation or reconditioning of military assets prior to deployment. The contract does not specify set-aside status or point of contact, and interested parties must access the full details via the provided DIBBS link to submit proposals before the deadline.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

More opportunities from Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

Same awarding agency

Supply of Pre-Bent Aluminized Exhaust TubingThe contract requires the manufacture and delivery of 35 units of aluminized exhaust tubing meeting precise technical specifications: each unit must have a 3-inch outer diameter and a 16-gauge wall thickness, with a pre-bent 45-degree angle and a unique end configuration featuring four slots on one end and a plain end on the other. The part is identified by JLG part number 6600102 and NSN 2990-01-291-5879, ensuring alignment with defense supply standards. The work falls under NAICS code 332999 for other fabricated metal product manufacturing, and the contract is structured as a subcontract under the Department of Defense’s Strategic Acquisition Program Directorate. The solicitation was posted on July 31, 2026, with responses due by August 5, 2026, offering a five-day window for submissions. Although no set-aside classification or specific geographic performance location is detailed, the contract is managed through the Defense Logistics Agency’s DIBBS platform, indicating a federal procurement process governed by defense supply chain protocols. The absence of a point of contact or detailed office address suggests reliance on the official DIBBS portal for communications and submission, and all deliverables must comply with the specified part numbers and structural requirements without deviations.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 23 hours ago

DEADLINE

RETAINER, PACKING

Solicitation # SPE7LX-26-U-8847

The contract involves the procurement of 69 retainer, packing units under National Stock Number 5330-00-508-7949, issued as a solicitation by the Defense Logistics Agency’s Strategic Acquisition Program Directorate under solicitation number SPE7LX-26-U-8847. It is structured as a Unilateral Indefinite Delivery Contract with a one-year period and a maximum value of $350,000, containing a guaranteed minimum quantity of 10 units. The acquisition is a total small business set-aside under NAICS code 339991, with responses due by July 31, 2026, and submissions required exclusively through the DLA Internet Bid Board System. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with export-controlled technical data subject to ITAR or EAR regulations, restricting access to contractors with approved JCP certification, completed training, and DLA authorization. Packaging and marking must strictly comply with MIL-STD-2073-1E, MIL-STD-129, and MIL-DTL-117 Type II Class C standards, utilizing opaque, waterproof, greaseproof bags for UV-sensitive items, and applying machine-readable barcoding as mandated. Preservation requires a dry, non-gas environment, and hazardous materials must be labeled per 29 CFR 1910.1200 and DFARS 252.223-7001, with Safety Data Sheets required prior to award. Asbestos is prohibited per FED-STD-313, and ocean shipments must use U.S.-flag vessels unless waived. Cybersecurity compliance is mandated at CMMC Level 2, requiring implementation of NIST SP 800-171 controls and adherence to the DFARS 252.204-7012 clause for safeguarding covered defense information and reporting cyber incidents. Inspection and acceptance occur at destination under MIL-STD-1916 or ASQ H1331 sampling, with zero non-conformances required for critical attributes and acceptable quality levels set at 0.1 for critical, 1.0 for major, and 4.0 for minor defects. Invoicing must be submitted through WAWF, and payment administration will be processed via DoDAAC codes specified in the final award. No formal evaluation factors or

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 23 hours ago

DEADLINE

Solicitation # SPE7LX-26-U-8595

The contract specifies the procurement of aluminumized exhaust tubing with a 3-inch outer diameter and 16-gauge wall thickness, pre-bent at a 45-degree angle and featuring four slots on one end while the other end remains plain. This is a critical application item identified by JLG Industries, Inc. part number 6600102 and NSN 2990-01-291-5879, with a required quantity of 35 units. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes all other standards including ASTM D3951, and packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements for Procurement. The item is classified as a DLA Direct, CONUS coverage item with no variance allowed in quantity and delivered FOB origin. Inspection and acceptance occur at the destination after a 76-day delivery window. Packaging must be palletized per RP001 and labeled in accordance with specified guidelines, with the unit of issue as each and a fixed unit price of $35.00, resulting in a total value of $1,225.00. The solicitation is issued under contract number SPE7LX-26-U-8595 with a response deadline of July 23, 2026, managed by the Department of Defense’s Strategic Acquisition Program Directorate, and all requirements must be met without exception, including the removal of government identification from non-accepted supplies.

Other Motor Vehicle Parts Manufacturing

POSTED

about 23 hours ago

DEADLINE

Solicitation # SPE7LX-26-U-8846

This contract is for the procurement of 72 O-Rings with NSN 5331-00-930-3041 under a Small Business Set-Aside solicitation, issued by the Defense Logistics Agency’s Strategic Acquisition Program Directorate. The solicitation, numbered SPE7LX-26-U-8846, was posted on July 16, 2026, with responses due by July 31, 2026, and is structured as an Indefinite Delivery Contract valid for one year with a maximum value of $350,000 and a guaranteed minimum order of 10 units. The O-Rings must conform to SAE AS3582 Revision D dated September 1, 1996, and SAE AMS3304J Revision J dated April 1, 2019, with all items manufactured after the solicitation date required to meet the current revision of these standards. Technical and quality requirements referenced under RA001 are governed by the DLA Master List of Technical and Quality Requirements, and supply chain traceability documentation must be retained per DLA Procurement Note C03. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, including special labeling such as “Do not bend” and sealing in a medium-duty, waterproof, greaseproof, opaque bag per MIL-DTL-117 Type II, Class C, Style 1 to protect against UV degradation. The contractor must comply with strict material prohibitions: no ozone-depleting chemicals, no asbestos, and no hexavalent chromium; substitutes require formal approval. Sampling for inspection follows MIL-STD-1916 or ASQ H1331 Table 1, with acceptance requiring zero non-conformances unless otherwise specified, and attributes are evaluated at critical, major, or minor levels based on AQL standards. Delivery is FOB origin within the continental United States with a 78-day ADO schedule, and payment must be processed electronically via Wide Area Workflow (WAWF) using DFARS-mandated procedures. The contractor must validate all representations in the System for Award Management, affirm compliance with cybersecurity standards including NIST SP 800-171 and DFARS 252.204-7012, and ensure no covered telecommunications equipment from prohibited Chinese entities is

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 23 hours ago

DEADLINE

Cybersecurity and Covered Defense Information SafeguardingThis contract requires the implementation of NIST Special Publication 800-171 controls to protect covered defense information within contractor systems, ensuring compliance with federal cybersecurity standards for safeguarding sensitive military data. The requirement is part of a subcontract under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the Small Business Administration, with the North American Industry Classification System code 541512 indicating a focus on computer systems design services. The effort is directed by the Strategic Acquisition Program Directorate within the Department of Defense and must be completed in accordance with the specified timeline, with proposals due by August 14, 2026, and the solicitation posted on July 30, 2026. Performance of the work is not restricted to a specific location, and the contract is accessible through the DIBBS portal for interested small businesses seeking to respond.

Computer Systems Design Services

POSTED

DEADLINE

Packaging, Preservation, and Palletization ServicesThe contract requires the provision of packaging, preservation, and palletization services for cylinder assemblies in full compliance with MIL-STD-129 and ASTM D3951 standards, adhering strictly to Defense Logistics Agency guidelines to ensure proper handling, protection, and traceability throughout the supply chain. All work must meet DLA’s stringent requirements for labeling, documentation, and material conditioning to maintain product integrity during storage and transportation. This is a total small business set-aside under the SBA program, reserved exclusively for small businesses as defined by the FAR, with the NAICS code 493190 classifying the work under other warehousing and storage. The solicitation was posted on July 30, 2026, and responses are due by August 14, 2026. Performance will be executed under the oversight of the Department of Defense’s Strategic Acquisition Program Directorate, though specific performance location and point of contact details are not provided. Participation is restricted to contractors eligible under the small business set-aside classification.

Other Warehousing and Storage

POSTED

DEADLINE

Hazardous Material Labeling and SDS ComplianceThe contract requires the provision of hazard communication labeling and Safety Data Sheets for hazardous substances associated with cylinder assemblies, ensuring full compliance with regulatory standards for chemical safety communication. This subcontract is designated as a Total Small Business Set-Aside under the SBA program, limited exclusively to small business concerns as defined by the FAR, and falls under the NAICS code 541690 for other scientific and technical consulting services. The solicitation was posted on July 30, 2026, with a mandatory response deadline of August 14, 2026, and is managed by the Strategic Acquisition Program Directorate under the Department of Defense. Performance of the required services is expected to align with federal hazardous material handling protocols, though the specific place of performance is not detailed. All submissions must meet the stringent labeling and documentation requirements necessary for safe handling, storage, and transport of hazardous substances within cylinder assemblies.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Linear Actuating Cylinder Assembly SupplyThe contract is for the supply of ten units of a linear actuating cylinder assembly identified by NSN 3040-01-339-8268, intended for use in industrial or hydraulic systems. It is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses qualify to respond, as defined by the SBA and FAR 19.5. The North American Industry Classification System code 332420 applies, indicating the work falls under the forging and stamping sector of metal product manufacturing. The solicitation was posted on July 30, 2026, with responses due by August 14, 2026, giving potential vendors approximately two weeks to submit proposals. The contracting activity is managed by the Strategic Acq Program Directorate within the Department of Defense, though specific office or performance location details are not provided. All communications and submissions must be made through the designated DIBBS portal linked in the contract posting.

Metal Tank (Heavy Gauge) Manufacturing

POSTED

DEADLINE

Supplier of Raw Materials (Metal Stock)The contract calls for the supply of steel or aluminum stock that complies with RoHS and REACH environmental standards, intended for the fabrication of vehicular brackets. All materials must be accompanied by certified mill test reports verifying chemical composition and mechanical properties to ensure conformity with required specifications. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the SBA, with the NAICS code 331110 indicating the classification for iron and steel mills and ferroalloy manufacturing. The opportunity was posted on July 30, 2026, and responses are due by August 14, 2026, with the contracting activity managed by the Strategic Acq Program Directorate within the Department of Defense. Performance is expected to align with federal procurement guidelines, and all submissions must be made through the designated DIBBS platform.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

DEADLINE

Hazard Communication and Chemical Safety ComplianceThis contract pertains to the application and documentation of hazard labels and safety data sheets for hazardous materials used in manufacturing or packaging, strictly aligned with OSHA 1910.1200 requirements for hazard communication. It ensures that all chemical handling, storage, and use within the scope of work comply with federal safety standards, including proper labeling, employee training, and accurate SDS management. The work is being procured as a subcontract under a Total Small Business Set-Aside designation, meaning only small businesses certified by the SBA are eligible to respond. The North American Industry Classification System code 541690 indicates the scope involves other scientific and technical consulting services, reinforcing a focus on compliance expertise rather than direct chemical handling or production. The solicitation was posted on July 30, 2026, with responses due by August 14, 2026, and is managed by the Strategic Acquisition Program Directorate within the Department of Defense. There is no specified place of performance, suggesting the work may be performed remotely or across multiple locations consistent with compliance documentation tasks. The contract does not list a point of contact, implying all communication must be directed through the official DIBBS platform referenced in the provided link. This procurement emphasizes adherence to regulatory standards and requires proven experience in chemical safety compliance systems to meet DoD operational and safety mandates.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Protective Packaging and Marking for Defense ShipmentsThis contract requires the protective packaging and labeling of vehicular brackets in strict compliance with MIL-STD-2073-1E and MIL-STD-129 standards, ensuring all items meet military-grade requirements for handling, storage, and transportation. The work includes detailed hazard and logistics markings to support secure and efficient supply chain operations across defense networks, with packaging designed to withstand rigorous environmental and physical stresses typical of military logistics. All work must adhere to the specified military standards without exception, and delivery timelines will be coordinated to align with the broader defense deployment schedule. The contract is structured as a total small business set-aside under the SBA program, exclusively available to small businesses qualifying under NAICS code 561910, which covers support activities for animal production and other services. It is issued by the Strategic Acquisition Program Directorate within the Department of Defense, with performance expected to occur at locations determined by the government. Interested parties must submit responses by the deadline of August 14, 2026, and all proposals must demonstrate proven capability in military-compliant packaging, experience with defense logistics, and full compliance with applicable standards. The solicitation is accessible via the DIBBS platform for full documentation and submission instructions.

Packaging and Labeling Services

POSTED

DEADLINE

Precision Metal Fabrication of Vehicular BracketsThe contract involves the precision metal fabrication of vehicular brackets designated by NSN 2590015172878, requiring exact adherence to DLA specifications through cutting, forming, welding, and finishing processes. The work must meet stringent quality and dimensional standards to ensure compatibility and performance in military vehicle systems. This is a subcontract opportunity set aside exclusively for small businesses under the SBA’s Total Small Business Set-Aside program, in accordance with FAR 19.5, ensuring eligibility and participation are limited to qualified small business concerns. The NAICS code 332322 categorizes the work under Other Fabricated Metal Product Manufacturing, aligning with the specialized nature of the fabrication tasks. The solicitation was posted on July 30, 2026, with a mandatory response deadline of August 14, 2026, allowing potential bidders sufficient time to prepare and submit proposals. The procuring entity is the Strategic Acquisition Program Directorate under the Department of Defense, indicating the critical nature of the end-use application. Although specific performance location and point of contact details are not provided, the contract reference is accessible through the DIBBS platform via the provided UI link, where full technical requirements and submission instructions can be obtained. Compliance with all DLA technical and administrative guidelines is essential for award consideration.

Sheet Metal Work Manufacturing

POSTED

DEADLINE