Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Marking and Bar-Coding Services

Active

Federal

Response Deadline08/06/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks qualified contractors to apply durable bare-item markings and 2D Data Matrix codes in strict compliance with MIL-STD-129 and RQ017 requirements for the identification of items during shipment and storage. These markings must ensure long-term readability and accuracy across all phases of logistics handling to meet Department of Defense standards for traceability and inventory management. The work is classified as a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, and falls under NAICS code 811219 for other industrial and commercial repair and maintenance services. The solicitation was posted on July 29, 2026, with responses due by August 6, 2026, and the performance location is specifically designated as New Cumberland, Pennsylvania, zip code 17070-5002. The contracting activity is managed by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense, and the procurement is intended to support military supply chain operations through precise and standardized marking procedures. All bidders must be prepared to demonstrate technical compliance with the referenced military standards and the capacity to deliver consistent, high-quality marking services on schedule.

General Info

Small businesses must apply MIL-STD-129 and RQ017-compliant markings in New Cumberland, PA, for DoD logistics.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

811219 - Other Electronic and Precision Equipment Repair and MaintenanceView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 29

subcontract

Response DeadlineAug 6

Submission deadline

Response Deadline

08/06/2026, 05:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Apply durable bare-item markings and 2D Data Matrix codes per MIL-STD-129 and RQ017 for shipment and storage identification.

Similar Contracts

Same NAICS industry code

On-Site Technical Support & Emergency ResponseThis contract requires a 24-hour on-site technical response service to address mission-critical system failures within pharmacy operations, ensuring minimal downtime through immediate dispatch, rapid diagnosis, and timely repair. The scope demands continuous availability and expertise to restore functionality in high-stakes healthcare environments where system failures directly impact patient care. The work is governed as a subcontract under the NAICS code 811219, issued by the Department of Veterans Affairs through the 256-NETWORK Contract Office 16, with responses due by August 10, 2026. Performance is expected to be delivered at locations serving VA pharmacy systems, though specific geographic details are not provided. The contract emphasizes urgency, reliability, and technical proficiency in maintaining critical infrastructure essential to veteran healthcare services.

256-NETWORK Contract Office 16 (36C256)

POSTED

DEADLINE

Quality Assurance and Inspection ServicesThis contract requires comprehensive quality assurance and inspection services adhering strictly to MIL-STD-1916 or ASQ H1331 standards, utilizing AQL sampling methods with a zero non-conformance acceptance criterion. All inspections, both in-process and final, must ensure absolute conformity to established quality thresholds, leaving no room for defects or deviations. The work is structured as a subcontract under a Total Small Business Set-Aside designation, reserved exclusively for small businesses certified by the SBA, with the NAICS code 811219 indicating repair and maintenance services. The solicitation was posted on July 30, 2026, with responses due by August 14, 2026, and is managed by the Strategic Acquisition Program Directorate within the Department of Defense. Performance location and specific contact details are not provided, but the contract can be accessed via the referenced DIBBS portal.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Inspection and Acceptance SupportThis contract requires full compliance with government inspection standards at the destination, where any defect or discrepancy will result in rejection with zero tolerance. All shipments must be meticulously prepared and documented to ensure flawless passage through official inspections, underscoring the critical need for precision in packaging, labeling, and adherence to regulatory protocols. The work falls under NAICS code 811219 and is structured as a subcontract under the Department of Defense’s Land Supply Chain, with performance required at New Cumberland, Pennsylvania, 17070-5002. Responses must be submitted by August 10, 2026, and the solicitation is open for bids through the DIBBS platform. The contract emphasizes strict enforcement of quality control throughout the entire supply and shipment process, leaving no room for error in meeting military or federal inspection requirements. Participants must demonstrate proven capability in handling sensitive logistics under rigorous compliance standards, with failure to meet specifications leading to immediate non-acceptance. Though no set-aside information or point of contact is provided, the place of performance and agency designation confirm the mission-critical nature of the work within the DoD’s logistical framework. Bidders are expected to possess the infrastructure and expertise to guarantee 100 percent readiness for inspection without delays or rework.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Quality Inspection and Government Acceptance SupportThe contract requires comprehensive quality inspection services to verify that all products meet specified technical requirements through first-article and batch inspections, ensuring conformance before delivery. It includes active support for government inspection activities at the point of origin, in strict alignment with Federal Acquisition Regulation 52.246-2, which governs government acceptance of supplies. This work is critical to confirming product reliability and regulatory compliance prior to acceptance by the Department of Defense. This is a subcontract under a Total Small Business Set-Aside, with the NAICS code 811219 indicating it is targeted toward businesses classified under Other Personal and Household Goods Repair and Maintenance. The opportunity was posted on July 30, 2026, with a response deadline of August 14, 2026, and is managed by LSO Combat Vehicles and Armament, a division within the Department of Defense. The performance location is not specified, but all inspection activities must be conducted at the vendor’s origin site to facilitate direct government oversight.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Quality Assurance and Inspection ServicesThe contract entails the implementation and ongoing maintenance of a quality inspection system aligned with AS9003 or ISO 9001 standards to ensure rigorous adherence to aerospace and defense quality requirements. This includes performing comprehensive in-process and final inspections across all relevant production phases to verify compliance with technical specifications and established quality criteria. The contractor must also provide direct support to Government Quality Assurance Representatives (QARs) in accordance with FAR 52.246-11, facilitating oversight activities and ensuring all inspection records, documentation, and corrective actions meet federal contractual obligations. The work is designated as a Service-Disabled Veteran-Owned Small Business Set-Aside under NAICS code 811219 and is structured as a subcontract under the Fluid Handling Division of the Department of Defense. Performance is required to be conducted in San Diego, California, with a response deadline of August 10, 2026, and the solicitation was posted on July 29, 2026. The contractor is expected to demonstrate proven capability in delivering high-integrity inspection services within a regulated defense environment, with a focus on precision, traceability, and collaboration with government oversight entities.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Quality Assurance and Inspection ServicesThe contract entails providing comprehensive quality assurance and inspection services for RF cable assemblies, ensuring adherence to strict acceptance quality levels including Critical defects at 0.1, Major defects at 1.0, and Minor defects at 4.0, with additional zero-defect verification required where specified. Inspections must cover all stages of production—incoming materials, in-process manufacturing, and final product verification—to guarantee compliance with technical and performance standards. This subcontract is designated as a Total Small Business Set-Aside under SBA regulations, reserved exclusively for small businesses as defined by the Small Business Administration. The North American Industry Classification System code 811219 categorizes the work under other personal and household goods repair and maintenance, reflecting the specialized nature of the inspection services. The solicitation was posted by the ASC Commodities Division under the Department of Defense, with responses due by August 11, 2026, and the work is expected to be performed under the authority and oversight of the federal procurement system.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

MIL-STD-129 Marking and Barcoding ServicesThe contract requires permanent marking and barcoding of bare items and containers in strict compliance with MIL-STD-129, ensuring all required military documentation standards are met. This includes the accurate application of contract-specific identifiers such as the contract number, NAWC CAGE code, and part number on each component and container to enable traceability and logistics readiness across the defense supply chain. The work must be executed with precision to ensure full adherence to federal military labeling protocols, with no flexibility in data content or application method. This subcontract opportunity under the NAICS code 811219 is managed by the Department of Defense’s Nuclear Reactor Program and is open for response until August 7, 2026. The solicitation, posted on July 28, 2026, does not specify a set-aside category or point of contact, and performance location details are not provided. Interested parties must submit proposals via the DIBBS platform using the provided link, ensuring all technical and compliance requirements for MIL-STD-129 are fully addressed in their submissions.

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Counterfeit Electronic Parts Detection SystemThe contract requires the implementation of comprehensive counterfeit parts detection and avoidance processes aligned with DFARS clause 252.246-7007, ensuring full traceability and reporting capabilities across all components, including mechanical parts integrated into electronic systems. The scope demands robust systems to identify, isolate, and document potential counterfeit items throughout the supply chain, with strict adherence to government-mandated standards for provenance verification and reporting procedures. All processes must be scalable, auditable, and capable of handling both electronic and mechanical elements to mitigate risk across the entire product assembly lifecycle. The contract is structured as a subcontract under the Department of Defense, specifically managed by the ASC Commodities Division, with a response deadline of August 3, 2026, and a posted date of July 28, 2026. The NAICS code 811219 indicates a focus on repair and maintenance services, suggesting the contractor may be responsible for sustaining or upgrading existing detection infrastructure. Performance obligations are not geographically restricted within the provided data, but compliance with federal defense regulations is mandatory. The contract emphasizes end-to-end accountability, requiring detailed documentation and transparent reporting mechanisms to ensure DoD supply chain integrity and national security objectives.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Post-Warranty Maintenance and Repair Services for PFT EquipmentThis contract provides ongoing maintenance, troubleshooting, calibration, and repair services for PFT equipment after the manufacturer’s warranty has expired, including the option for preventive maintenance agreements to ensure continued operational reliability. The services are intended to support the long-term functionality of the equipment through scheduled inspections, timely repairs, and technical support, minimizing downtime and extending equipment life. The contract is classified as a subcontract under a Small Business Set Aside, specifically reserved for small businesses as defined by the SBA, with the NAICS code 811219 indicating it falls under other commercial and industrial machinery and equipment repair and maintenance. It is managed by the Department of Veterans Affairs through the 247-NETWORK Contract Office 7, and while specific performance locations and contact details are not provided, the work is likely to be performed at VA facilities nationwide where PFT equipment is in use.

247-NETWORK Contract Office 7 (36C247)

POSTED

DEADLINE

Inspection and Acceptance Support at OriginThe contract requires support for government inspection activities at the origin, in accordance with FAR 52.246-2, focusing on the preparation of all necessary documentation and close coordination with the Defense Logistics Agency Quality Assurance Representative to ensure compliance with federal procurement standards. All tasks must be executed to facilitate timely and accurate acceptance of supplies prior to shipment, with full adherence to quality control protocols outlined in the regulation. The work is tied to a specific place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating the physical location where inspection support services must be delivered. The contract is classified as a subcontract under the NAICS code 811219, and it was posted on July 27, 2026, with a response deadline of August 4, 2026. It is issued by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense and relates to support services for government inspection, not direct procurement. The nature of the work implies involvement with defense supply chain logistics, requiring precise administrative and procedural alignment with federal inspection frameworks. No set-aside designation or specific point of contact is provided, and the primary expectation is seamless execution of documentation and coordination duties to enable smooth government acceptance processes.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Quality Inspection & Sampling Services

ASC COMMODITIES DIVISION

POSTED

DEADLINE

MIL-STD-129 Compliant Marking and Data Matrix LabelingThe contract requires precise application of MIL-STD-129-compliant markings, including barcodes, data matrix symbols, and Unit of Issue labels on all packaging and containers to meet Department of Defense shipment identification standards. All labeling must be executed accurately to ensure traceability, compliance, and readiness for military logistics operations, with strict adherence to the technical specifications outlined in the standard. The work must be performed in alignment with DoD requirements to support timely and error-free delivery of materiel. This is a subcontract opportunity under NAICS code 811219, with a performance location at Hill AFB, Utah, 84056-5734. The solicitation was posted on July 27, 2026, and responses are due by August 4, 2026. The contracting activity is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, and all work must be completed to support military supply chain integrity without deviation from established labeling protocols.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

TRANSMITTER, PRESSURE

Solicitation # SPE4A5-26-Q-0661

The contract pertains to the procurement of 75 pressure transmitters, identified by NSN 6685-21-912-0457 and part number 622712-2-1 from Honeywell Limited, classified as a commercial item and designated as a critical application item. The requirement is firm fixed price with no variance allowed in quantity, and delivery is mandated 477 days after award date. Inspection and acceptance occur at origin, and the item is to be shipped FOB origin. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements referenced with R-numbers including RC001, RP001, RQ011, and RT001, which take precedence over any other standards. Packaging must conform to MIL-STD-129 and RP001, with hazardous materials adhering to FED-STD-313 and IP025, while non-hazardous items follow ASTM D3951 unless superseded by DLA requirements. Unit of issue is each, and palletization must meet DLA packaging standards. Item Unique Identification is not required per customer request, and DFARS 252.211-7003(c)(1)(i) applies. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The delivery destination is Warner Robbins Air Force Base with specific parcel post and freight shipping addresses provided, and the material need date is June 7, 2028.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 24 hours ago

DEADLINE

TRANSMITTER, PRESSUR

Solicitation # SPE4A5-25-T-785M

The contract involves the procurement of five units of the NSN 6685013158618 Transmitter, Pressure, which is designated for delivery to the DLA Distribution at W1A8 within 171 days after award. The procurement is set aside exclusively for Women-Owned Small Businesses (WOSB) under NAICS code 334512, emphasizing opportunities for eligible small business vendors. The solicitation is issued as a Request for Quotation (RFQ), accessible electronically through the provided link, with no hard copies or detailed specifications, plans, or drawings available. All responsible sources are encouraged to submit quotes by the deadline of October 1, 2025, and submissions must be made electronically. The contracting agency is DLA Aviation, part of the Department of Defense, based in Richmond, Virginia. Questions regarding the solicitation should be directed via email to the designated point of contact, with further details available through the official DIBBS website. The contract emphasizes timely response and compliance with the set-aside criteria, ensuring that qualified small businesses, particularly women-owned, have the opportunity to participate in fulfilling this procurement requirement.

Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

about 24 hours ago

DEADLINE

Solicitation # SPE4A5-26-Q-0618

The contract pertains to the procurement of three non-magnetic shackles identified by NSN 4030-01-481-9608 under solicitation SPE4A5-26-Q-0618, with a firm fixed price and zero variance in quantity. Delivery is required within 76 days after order date, with inspection and acceptance occurring at origin, and delivery terms set to FOB destination. Packaging must strictly comply with MIL-STD-2073-1E and DLA's RP001 packaging requirements, including preservation methods, material specifications, and MIL-STD-129 marking without special markings. Mercury and mercury-containing compounds are prohibited in all aspects of the supply chain including preservation, packaging, and direct contact with hardware, except for specific permitted applications such as batteries, fluorescent lamps, sensors, or weapon systems as outlined by NAVSEA, which must include secondary containment. Ozone-depleting substances are entirely banned, regardless of any conflicting specification language, and all substitutions require prior approval. Technical data is proprietary or insufficient, precluding competitive sourcing, and casting or forging may be necessary for manufacturing, requiring suppliers to request tooling and material assistance through DLA’s designated channels. The item is subject to zero-based sampling per MIL-STD-1916 or ASQ H1331, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Item unique identification is not required per customer request, but compliance with the DLA Master List of Technical and Quality Requirements is mandatory, with the applicable revision determined by the solicitation or award date based on acquisition type. The contract is a total small business set-aside, and all deliveries must be addressed to DLA Distribution in San Diego, California.

POSTED

about 24 hours ago

DEADLINE

LIGHT, NAVIGATIONAL, AIR

Solicitation # SPE4A5-26-Q-0660

This contract is for the procurement of two units of a light, navigational aircraft component identified by NSN 6220-01-454-3041 and part number 30-2443-2 from Grimes Aerospace Company. The item is classified as a critical safety item and a commercial product of a type, subject to stringent quality oversight including SAE AS9100 requirements for manufacturers and non-manufacturers. All supplies must comply with MIL-STD-129 marking standards, including lot and serial numbers, contractor and manufacturer CAGE codes, and part numbers, with special fragile labeling. Unit packaging and palletization must adhere to MIL-STD-2073-1E and DLA packaging requirements, with no government identification removed from non-accepted items. Inspection and acceptance occur at origin, with firm fixed pricing and zero variance allowed in quantity. Delivery is due 333 days after order date, with FOB origin terms, and freight is directed to the DLA Distribution facility in New Cumberland, Pennsylvania. Cybersecurity requirements include CMMC Level 2 self-assessment, and all deviations or waivers require formal approval from the DSC Contracting Officer. Technical and quality requirements are drawn from the DLA Master List, with documentation tied to QAP-106 Revision B dated July 9, 2012, and the item is not subject to Item Unique Identification per Service customer request.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 24 hours ago

DEADLINE

TRANSFORMER, POWER

Solicitation # SPE4A5-26-T-308A

The contract specifies the procurement of a critical application power transformer, part number 397849-07403, with NSN 5950009576725, requiring delivery of one unit under CLIN 0001 and an identical unit under CLIN 0002, both with a five-day delivery window after award and a required delivery date of July 23, 2026. Delivery is FOB origin, with inspection and acceptance occurring at the destination, specifically at Marine Aviation Logistics Squadron 16, Building 7209, MCAS Miramar, San Diego, CA. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, prioritizing RP001 for palletization and MIL-STD-129 for marking and labeling; non-hazardous items must be commercially packaged per ASTM D3951 unless superseded, while hazardous items require compliance with TQ requirement IP025 per FED-STD-313. Physical identification of the item must adhere to RQ017, and any government markings on rejected supplies must be removed per RQ011. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances mandated unless otherwise specified, and unspecified attributes are treated as major with an AQL of 1.0. Cybersecurity compliance is mandatory at CMMC Level 2 via self-assessment, supported by the application of FAR clauses 52.240-93 and deviation 2026-00038, which also extend to changes, subcontracting, and contractor information system safeguarding. The contractor must hold a valid UEI and CAGE code, and represent size status and socioeconomic classifications as applicable. Invoicing must be conducted electronically through WAWF, with payment administered via the DoDAAC system. The item is classified as a covered defense item, requiring adherence to all applicable cybersecurity, packaging, handling, and reporting standards. All documentation, including delivery, marking, and compliance reporting, must align with DLA and DoD directives, with no price information provided in the contract lines despite confirmed quantities.

Welding and Soldering Equipment Manufacturing

POSTED

about 24 hours ago

DEADLINE

HOUSING, AIR OUTLET,

Solicitation # SPE4A5-26-T-306Q

The contract pertains to the procurement of one unit of a housing, air outlet, identified by NSN 1660016656502 and part number 189386-2, under solicitation SPE4A5-26-T-306Q, issued by the Department of Defense’s ASC Supplier Oper OEM Division. Delivery is required 169 days after award, with a need ship date of January 17, 2027, and an original delivery target of February 13, 2028, to Tinker Air Force Base, Oklahoma, under FOB Destination terms. The item is exempt from Item Unique Identification per DFARS 252.211-7003(c)(1)(i), but must be physically marked per RQ017 and packaged in compliance with ASTM D3951, with all packaging and labeling requirements superseded by the DLA Master List of Technical and Quality Requirements and governed by MIL-STD-129, including precise palletization under RP001. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, with unspecified attributes treated as major and acceptance criteria demanding zero non-conformances unless stated otherwise; accelerated life testing at 105% of rated voltage is an approved alternative to standard testing. The contractor must comply with CMMC Level 2 self-assessment requirements and adhere to NIST SP 800-171 DOD assessment mandates, with hazardous materials properly labeled per 29 CFR 1910.1200 and reported prior to award. Inspection and acceptance occur at the destination, performed by government personnel, with contract performance governed by FAR and DFARS clauses covering equal opportunity, trafficking in persons, employment eligibility, sustainable products, cybersecurity, subcontracting, safety notifications, and transportation. Payment processing is required via WAWF, with no unit price or total value disclosed in the solicitation. The contract includes mandatory representations regarding small business status, unique entity identifier, and covered defense telecommunications equipment, all to be certified by the offeror. All technical and quality specifications referenced in the DLA Master List override industry standards, and the supply must conform to all applicable packaging, marking, environmental, and cybersecurity obligations outlined in the solicitation.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 24 hours ago

DEADLINE

ADAPTER, STRAIGHT, FL

Solicitation # SPE4A5-26-T-299Z

The contract is for the procurement of two straight flange-to-tube adapters with NSN 4730-01-196-6006 and part number 9969M50P02 from General Electric Company, issued under solicitation SPE4A5-26-T-299Z by the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION. Delivery is required within 171 days after order placement, with an original delivery deadline of November 27, 2027, and a need ship date of January 17, 2027. The item must be manufactured and delivered FOB destination to the DLA Distribution facility in New Cumberland, Pennsylvania, with no tolerance for quantity variance. Packaging must comply with ASTM D3951, but all requirements from the DLA Master List of Technical and Quality Requirements take precedence, including RP001 for palletization and RQ017 for physical identification and bare item marking. All packaging and labeling must adhere to MIL-STD-129, including barcoding per DoD logistics standards, with the unit of issue as each and quantity per unit pack as specified. Sampling for inspection follows MIL-STD-1916 or ASQ H1331 Table 1, requiring zero non-conformances for acceptance unless otherwise stipulated, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0, respectively. Inspection and acceptance are conducted at the origin. The adapter is designated as a critical application item with no shelf life requirement, and item unique identification is not required per DFARS 252.211-7003(c)(1)(i). The contract enforces compliance with hazardous material identification via FAR 52.223-3, cybersecurity protections under 252.204-7012, prohibition of hexavalent chromium, and restrictions on the use of foreign-flag vessels for shipping, which require prior approval and certification. The contractor must flow down applicable clauses to subcontractors and comply with labor laws, including combating trafficking in persons, employment eligibility verification, and whistleblower protections. Invoicing must be submitted electronically via Wide Area WorkFlow, and no pricing information is provided in the contract, as unit and total prices remain blank. The solicitation required electronic submission through

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 24 hours ago

DEADLINE

MOTOR-TACHOMETER GE

Solicitation # SPE4A5-26-T-307W

The contract seeks the delivery of one MOTOR-TACHOMETER GENERATOR with NSN 6105-00-068-7214 under solicitation SPE4A5-26-T-307W, with a required delivery within five days after order placement to San Diego, California. The item must conform to stringent military standards for packaging and marking, including MIL-STD-2073-1E for preservation and packaging, and MIL-STD-129 for labeling with mandatory linear and 2D Data Matrix barcodes. Physical identification of the bare item is required, and all packaging must adhere to DLA’s RP001 requirements, prohibiting parcel post in favor of traceable transportation methods. Sampling for acceptance follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required for acceptance, unless otherwise specified, and attributes are assigned AQLs of 0.1 for critical, 1.0 for major, and 4.0 for minor characteristics. The contractor must comply with DLA’s Technical and Quality Requirements referenced through R and I numbers in the DLA Master List, with the applicable revision controlled by the solicitation issue or award date. The contract imposes robust cybersecurity and compliance obligations under CMMC Level 2 self-assessment and NIST SP 800-171 requirements, mandating safeguarding of covered defense information and reporting of cyber incidents per DFARS 252.204-7012. Hazardous materials must be labeled and documented with Safety Data Sheets compliant with 29 CFR 1910.1200 and submitted prior to award, and any ocean transport must use U.S.-flag vessels unless a prior waiver is granted with detailed documentation and bill of lading submission. The contractor is subject to payment levies for outstanding government debts and must immediately report any potential safety issues with the item. Invoicing must be conducted via WAWF, and compliance with FAR and DFARS clauses covering employment eligibility, trafficking in persons, sustainable products, subcontracting, inspection at destination, and prohibitions on procurement from communist Chinese military companies is required. Offerors must provide UEI and CAGE codes, represent their small business status, and disclose joint venture partners if applicable, with deviations applying to multiple clauses under Deviation 2026-00038. All proposals must be submitted electronically via DIBBS by the

Motor and Generator Manufacturing

POSTED

about 24 hours ago

DEADLINE

PANEL, STRUCTURAL, AI

Solicitation # SPE4A5-26-T-308G

The contract covers the procurement of a single structural panel, identified by NSN 1560016882236 and part number 113T1617Y103, for use in critical aerospace applications under The Boeing Company. The item is subject to stringent technical, quality, and regulatory requirements, including compliance with the DLA Master List of Technical and Quality Requirements, FAA airworthiness standards for certified parts, and configuration change management protocols. Packaging and preservation must adhere strictly to MIL-STD-2073-1E with preservation method 10, no preservation material, and packaging code U, while marking must conform to MIL-STD-129 without special markings. Palletization follows DLA Packaging Requirements for Procurement, and shipment must utilize traceable freight methods—parcel post is prohibited. Inspection and acceptance occur at the destination, with sampling governed by MIL-STD-1916 or a comparable zero-based plan, requiring zero non-conformances unless otherwise specified. Item Unique Identification is not required per the service customer’s request. Delivery is due within five days of order, FOB origin, to McConnell AFB, KS, with required dates of July 15 and July 21, 2026, depending on the line item. The contract includes multiple clauses under FAR and DFARS addressing cybersecurity, hazardous materials, export controls, trafficking in persons, employment eligibility, and supplier diversity, with numerous deviations authorized through formal deviation numbers. All pricing information is omitted, and no total contract value is provided, though three separate CLINs each specify one unit to be delivered. Invoicing must be processed via Wide Area WorkFlow, and contractors must comply with NIST SP 800-171 for safeguarding covered defense information, with cyber incidents requiring reporting within 72 hours. Prohibitions on hexavalent chromium, covered defense telecommunications equipment, and Communist Chinese Military Companies apply, and the contractor must ensure compliance with all applicable hazardous materials reporting and handling standards. Supply chain traceability documentation must be retained per DLA Procurement Note C03, and the contractor is responsible for full compliance with FAA airworthiness approval requirements, including the submission of a Certificate of Airworthiness and Conformance.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 24 hours ago

DEADLINE

SHAFT ASSEMBLY, ACTU

Solicitation # SPE4A5-26-T-307M

The contract solicitation SPE4A5-26-T-307M is for the procurement of one unit of a shaft assembly, actuator, identified by NSN 1680010118060 and part number AA8586 from Simmonds Precision Products Inc. The item is classified as a critical application item and must be delivered 172 days after receipt of order, with an original required delivery date of February 1, 2027, and a need ship date of February 1, 2026. Delivery is FOB origin and acceptance occurs at the destination facility, specifically the DDSP New Cumberland Facility in New Cumberland, Pennsylvania. The contractor must comply with stringent packaging and marking requirements per ASTM D3951 and MIL-STD-129, including barcoding with Data Matrix and UCC-128 labels, and palletization in accordance with DLA Packaging Requirements RP001. All packaging and labeling must adhere to the DLA Master List of Technical and Quality Requirements, which supersedes ASTM D3951 where applicable. Inspection and acceptance criteria mandate zero nonconformances in sampling, using MIL-STD-1916 or ASQ H1331 Table 1 with specified verification levels and AQLs for critical, major, and minor attributes; unspecified attributes default to major level. The item must be physically marked per RQ017, and government identification must be removed from non-accepted supplies per RQ011. Invoicing must be conducted electronically via Wide Area WorkFlow. The contract includes numerous Federal Acquisition Regulation clauses addressing cybersecurity, trafficking in persons, employment eligibility, sustainable products, hazardous material handling, safeguarding of covered defense information, changes, and subcontracting, all applied under Deviation 2026-00038 or 2026-O0025 as appropriate. Compliance with prohibitions on covered defense telecommunications equipment and hexavalent chromium is mandatory, and the contractor must affirm its small business status, UEI, and CAGE code, with additional reporting triggered if covered equipment is provided. The contracting officer has not specified the contract type, pricing, or evaluation factors, leaving offerors to submit competitive proposals under an undefined acquisition strategy. All submissions must be made through the DLA Internet Bid Board System by the response deadline of August 5, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 24 hours ago

DEADLINE

SENSOR ASSY, SKIN TE

Solicitation # SPE4A5-26-T-307L

The contract pertains to the procurement of a SENSOR ASSY, SKIN TEMPERATURE, identified by NSN 1680007929233 and part number 969-0032-001, with a total quantity of 67 units to be delivered FOB origin to Tinker Air Force Base, Oklahoma, within 133 days of the award, with inspection and acceptance occurring at the destination. The item is classified as a commercial item, and the procurement is structured as a total small business set-aside under NAICS code 336413. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which take precedence over all other standards including ASTM D3951, and contractors must comply with specific requirements such as RQ017 for bare item marking, RQ011 for removal of government identification from non-accepted items, and RT001 for measuring and test equipment. Sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required for acceptance unless otherwise specified; attributes are classified with verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must meet DLA Packaging Requirements for Procurement, with all UoI and QUP as contractually defined. Cybersecurity compliance requires a CMMC Level 2 self-assessment and adherence to NIST SP 800-171 DOD assessment requirements, while safeguarding of covered contractor information systems is mandatory under applicable clauses. Item Unique Identification is not required per DFARS 252.211-7003(c)(1)(i). The contract includes clauses on equal opportunity, combating human trafficking, employment eligibility verification, sustainable products, hazardous material identification, and accelerated payments to small business subcontractors, with multiple deviations applied. Invoicing must be processed electronically through Wide Area WorkFlow, and delivery must be to the designated DLA Distribution Depot Oklahoma address. The contract does not specify option quantities or a formal contract type, and pricing information for the identified line item is listed at $67.00 per unit, though additional PRLIs with higher unit costs appear in partial data without full context.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 24 hours ago

DEADLINE

SHAFT ASSEMBLY, ACTU

Solicitation # SPE4A5-26-T-9432

The contract specifies the procurement of a Shaft Assembly, Actuator with NSN 1680010118060 and part number AA8586, manufactured by Simmonds Precision Products Inc, under solicitation SPE4A5-26-T-9432. Four units are required at a fixed quantity with zero variance, to be delivered FOB origin within 27 days of contract award, with delivery scheduled for April 13, 2027. Inspection and acceptance occur at the destination, and all items must comply with the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging must conform to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization and labeling strictly following government specifications. Sampling and inspection must adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical attributes are subject to the most stringent verification levels. The supplier must manage configuration changes through formal Engineering Change Proposals and ensure all non-accepted supplies are properly de-identified per RQ011. All technical, quality, and packaging directives, including those identified by R or I numbers, are binding and must be referenced from the official DLA eProcurement portal. The item is classified as a Critical Application Item, and delivery must be sent to the designated DLA distribution facility in New Cumberland, Pennsylvania, with transportation details governed by DLAD Proc Notes C19 and C20.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 24 hours ago

DEADLINE