Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Quality Assurance and Inspection Support

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks quality assurance and inspection support for pre-shipment verification of supplies intended for government acceptance, adhering to DLA RA001 standards and FAR 52.246-2 regulations. The scope involves ensuring product conformity, conducting inspections, and providing documentation to validate compliance prior to shipment, with all activities aligned to federal procurement quality control requirements. The work is to be performed at a designated location in San Diego, California, with a specific zip code of 92136-3581, and is exclusively available to women-owned small businesses under a WOSB set-aside. The solicitation was posted on July 26, 2026, with responses due by August 6, 2026, and the contract is classified as a subcontract under NAICS code 541380, which pertains to other scientific and technical consulting services. The performing organization must operate under the oversight of the Department of Defense, specifically the San Diego office, and be prepared to meet rigorous inspection protocols to ensure government acceptance. All deliverables and processes must fully align with required federal acquisition regulations and defense logistics agency standards, with no deviation permitted in inspection methodology or documentation reporting.

General Info

Women-owned small business contract for pre-shipment inspection in San Diego under DLA RA001 and FAR 52.246-2.

Agency

Department Of Defense → SAN DIEGOView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

SAN DIEGO, CA, 92136-3581, US

Set-Aside

WOSB

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → SAN DIEGO
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → SAN DIEGO
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Pre-shipment inspection and quality verification in accordance with DLA RA001 and FAR 52.246-2 for government acceptance.

Similar Contracts

Same NAICS industry code

NAICS: 541380
New
Federal
Air Emission Monitoring of Boiler and Engine Generating Units on USAG Japan Installations in Kanto PlainThe U.S. Government intends to award a firm-fixed price contract directly to qualified suppliers for the comprehensive air emission monitoring of boiler and engine generating units across U.S. Army Garrison Japan installations in the Kanto Plain region. This requirement will be solicited under FAR 12.201-1(c)(2) as a non-competitive procurement, with an anticipated award date around October 16, 2026, though this is subject to change. The contractor must provide all labor, equipment, materials, transportation, and management necessary to perform monitoring in strict accordance with the Performance Work Statement, established commercial standards, and the Japan Environmental Governing Standard. All work must be conducted entirely within Japan, and the selected vendor must hold valid Japanese operating licenses and possess a Japanese CAGE code. Additionally, the contractor is required to be officially registered under Japan’s Measurement Law for the Environmental Measurement Certification Business for Concentration in the relevant prefecture, ensuring compliance with national regulatory frameworks. The solicitation number is FA520926Q038A, with a response deadline of August 28, 2026, and the primary point of contact is located at the U.S. Department of Defense office in APO, AP, with additional coordination handled through personnel in Zama, Kanagawa Prefecture. The North American Industry Classification System code for this requirement is 541380, indicating it falls under other scientific and technical consulting services.
FA5209 374 Cons Pk

POSTED

1 day ago

DEADLINE

in about 1 month
View Details

More opportunities from Department Of Defense → SAN DIEGO

Same awarding agency

NAICS: 493190
New
DIBBS
Packaging, Labeling, and Preservation ServicesThe contract requires the provision of packaging, labeling, and preservation services specifically aligned with military logistics standards, including MIL-STD-129 compliant labeling and ASTM D3951 preservation techniques to ensure the integrity and readiness of defense-related shipments. These services are essential for safeguarding equipment and supplies during storage and transit, with strict adherence to federal military specifications governing identification, packaging materials, and environmental protection. The work must be performed at the designated place of performance in San Diego, California, with a zip code of 92136-3581, and all deliverables must meet precise technical and procedural requirements to support Department of Defense supply chain operations. This subcontract is set aside exclusively for Women-Owned Small Businesses under the WOSB program, emphasizing the government’s commitment to promoting diversity in defense contracting. It falls under the NAICS code 493190, which covers other support activities for water transportation, reflecting the specialized logistics and handling nature of the services. The solicitation was posted on July 26, 2026, with a response deadline of August 6, 2026, and is managed by the Department of Defense through its San Diego office. Interested parties must respond through the designated DIBBS portal before the deadline to be considered for award, and compliance with all technical, administrative, and regulatory obligations is mandatory for qualification.
Other Warehousing and Storage

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
VALVE, RELIEF, PRESSUThe contract specifies the procurement of a pressure and temperature relief valve under solicitation SPE7MC-26-T-155C, a Service-Disabled Veteran-Owned Small Business Set-Aside, for a quantity of 41 units with a unit price of $41.00, totaling $1,681.00. The item is identified by NSN 4820-01-473-7464 and approved part numbers A733 from AUSCO INC and 2784514-2 from HONEYWELL INTERNATIONAL INC., with delivery required within 158 days FOB origin to DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581. The original required delivery date is March 2, 2027, with a need ship date of January 12, 2027. Inspection and acceptance occur at the destination, with zero tolerance for quantity variance. Packaging must comply with ASTM D3951 and MIL-STD-129, and palletization must follow DLA’s RP001 packaging requirements, with all DLA Master List of Technical and Quality Requirements overriding any conflicting standards. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, Table 1, or a comparable zero-based sampling plan, with attributes classified as critical, major, or minor assigned verification levels of VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes default to major, and acceptance requires zero non-conformances unless otherwise stated. The valve is designated a critical application item, and government identification must be removed from non-accepted supplies as required by RQ011. Item Unique Identification is not required per the Service Customer’s request, invoking DFARS 252.211-7003(c)(1)(i). All technical and quality requirements referenced by R or I numbers in the DLA Master List take precedence and are incorporated by reference. Transportation and shipping instructions are governed by DLAD Proc Notes C19 and C20, and the unit of issue is EA per the DoD authorized standard. The solicitation was posted on July 26, 2026, with a response deadline
Industrial Valve Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332912
New
DIBBS
STEM, FLUID VALVESTEM, FLUID VALVE, MONEL OVERALL, INCLUDING DISK, is a critical application item supplied under solicitation SPE7MC-26-T-154S with NSN 4820012785579 and part number 032-935-050-360-048. Four units are required at a unit price of $4.00, totaling $16.00, with delivery due within 256 days of award and FOB origin. The item must be packaged in strict compliance with MIL-STD-2073-1E using packaging method 31, dry packaging, and wrapped in JA material with D3 unit containers and E5 intermediate containers, marked per MIL-STD-129 without special marking codes. All packaging must conform to DLA packaging requirements and palletization standards. The product is subject to strict prohibitions against intentional use of mercury or mercury-containing compounds, with exceptions only for specific functional applications such as batteries, fluorescent lights, sensors, weapon systems, or NAVSEA-specified reagents, and portable devices containing mercury must include shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Inspection and acceptance occur at destination, with zero variance allowed on quantity. Delivery is to DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581, with an original required delivery date of October 23, 2025, and a need ship date of October 7, 2025. The contract incorporates technical and quality requirements from the DLA Master List, and the solicitation was issued under NAICS code 332912 by the Department of Defense through the San Diego office, with Paula Mcclary as the primary point of contact.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SAFETY RELIEFThis contract covers the procurement of a safety relief valve with NSN 4820-01-457-3110 and part number BASGG04SKK manufactured by Dante Valve Company, designated for use on Arleigh Burke-class vessels. The valve features a copper alloy body and is classified as a Navy field-level reparable item, requiring strict configuration control per MIL-STD-973. Manufacturing may involve casting or forging processes, and if the contractor lacks the necessary tooling, they must submit a Casting and Forging Assistance Request to DLA. The item must not contain or come into direct contact with mercury or mercury compounds except for specific exempted applications such as batteries, fluorescent lights, sensors, controls, weapon systems, or chemically specified reagents, with portable mercury-containing devices requiring shockproof design and secondary containment per NAVSEA 5100-003D. The contract requires delivery of eight units within 156 days, FOB origin, with zero variance allowed in quantity, and inspection and acceptance to occur at destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, using prescribed methods including protective wrapping, cushioning, and unit containerization under pack code U, with no special marking required. Palletization must adhere to DLA packaging requirements, and transportation details follow DLAD Proc Notes C19 and C20. The delivery destination is DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581. All technical and quality requirements referenced are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The contract was issued under solicitation SPE7MC-26-T-154Z with a response deadline of August 6, 2026, and a required ship date of January 10, 2027.
Industrial Valve Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
VALVE, EXPANSIONThis contract, issued under solicitation number SPE7MC-26-T-134L by the Defense Logistics Agency (DLA), is for the procurement of 35 expansion valves identified by NSN 4820015723452, at a unit price of $35.000, totaling $1,225.00. Delivery is required within 65 days of award, with FOB Origin terms applying to shipment, while inspection and acceptance occur at the destination—DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581. The contractor must package and mark all items in strict accordance with MIL-STD-129 for labeling and barcoding, and ASTM D3951 for commercial packaging, with DLA’s Master List of Technical and Quality Requirements taking precedence over any conflicting standards. Palletization must conform to RP001, and all packaging must be shock-proof with a secondary containment for mercury-containing components such as portable fluorescent lamps or instruments, in compliance with NAVSEA 5100-003D, unless the mercury is part of a functional component explicitly permitted such as batteries, sensors, or chemical reagents authorized by NAVSEA. The use of mercury or mercury-containing compounds in any other hardware or supply is strictly prohibited. The contract mandates adherence to numerous federal acquisition regulations including FAR 52.246-2 for destination inspection, 52.222-36 for equal opportunity for workers with disabilities, 52.223-3 for hazardous materials identification, and DFARS clauses covering cybersecurity compliance including 252.204-7012 for safeguarding covered defense information and 252.240-7997 for NIST SP 800-171 assessment submissions. Contractors must also prohibit the use of covered defense telecommunications equipment from specified foreign entities and comply with the hazardous materials labeling requirements under 252.223-7001 and the Hazard Communication Standard. Payment must be processed electronically through WAWF using the appropriate document types for fixed-price line items, and all offerors must provide a valid Unique Entity Identifier (UEI) and CAGE code. No additional attachments or special provisions beyond those referenced are included, and proposals must be submitted exclusively via the D
Industrial Valve Manufacturing

POSTED

3 days ago

DEADLINE

in 2 days
View Details