Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Quality Assurance and Inspection Support

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the performance of pre-shipment inspections and compliance verification to ensure that navigational lights meet the quality standards established by the Defense Logistics Agency and Federal Acquisition Regulation 52.246-2. The work focuses on verifying that all products conform to technical and regulatory requirements prior to delivery, with an emphasis on ensuring safety, functionality, and adherence to military specifications. The scope of work involves inspecting items at the source, documenting findings, and certifying compliance to support final acceptance by the purchasing entity. This is a subcontract under the NAICS code 541330, issued by the ASC Commodities Division within the Department of Defense, with performance required in San Diego, California, at zip code 92155-5993. The solicitation was posted on August 2, 2026, and responses are due by August 10, 2026. All work must be completed in alignment with federal acquisition regulations and DoD quality assurance protocols, and the contractor is expected to provide documentation and reporting that demonstrates consistent adherence to the specified standards throughout the inspection process.

General Info

Pre-shipment inspection of navigational lights to verify DoD and FAR compliance in San Diego, California.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

SAN DIEGO, CA, 92155-5993, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Perform pre-shipment inspections and compliance verification to ensure navigational lights meet DLA and FAR 52.246-2 quality standards.

Similar Contracts

Same NAICS industry code

NAICS: 541330
New
SLED
Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide Construction Management services under an Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract to support major construction projects across various phases including planning, design, construction, and closeout. These services will encompass a range of delivery methods such as Design Build, Progressive Design Build, and other alternative project delivery formats, with the primary goal of ensuring projects adhere to authorized schedules, budgets, and quality standards. The contract is intended to streamline oversight and coordination for the Port’s extensive capital improvement initiatives, requiring technical expertise in managing complex infrastructure developments. Primary point of contact for this opportunity is Hala Rabbo, who can be reached via email or phone, with additional support available from Project Manager Ann Davidson. The solicitation is classified under NAICS code 541330, which designates architectural, engineering, and related services. Although the contract is currently posted as a forecast with no official solicitation number or set-aside details, interested parties are encouraged to monitor the provided UI link for updates and future formal solicitations. The performance location will be at various Port of Seattle facilities and project sites, with no specific city or state specified in the metadata, indicating broad geographic scope across Port operations.
Construction Management

POSTED

about 7 hours ago

DEADLINE

N/A
View Details
NAICS: 541330
New
SLED
Retro-Commissioning, TAB, Controls, and Regulatory Support IDIQThe consultant will deliver retro-commissioning, test/adjust/balance, controls, and regulatory support services across Seattle-Tacoma International Airport’s facilities and infrastructure systems, ensuring optimal performance in a continuous 24/7/365 operational environment. The scope includes identifying and correcting deficiencies in mechanical, HVAC, plumbing, lighting, Direct Digital Controls, smoke control, and fire protection systems to enhance efficiency, comfort, reliability, and lifespan while maintaining compliance with safety and regulatory standards. Services are delivered through Service Directives and require close collaboration with Aviation Facilities and Infrastructure to meet project deliverables. Work will be managed under an Indefinite-Delivery/Indefinite-Quantity contract, with the Port of Seattle’s Aviation Facilities and Infrastructure team as the primary point of contact. The procurement is classified under NAICS code 541330, reflecting professional, scientific, and technical services related to engineering. Key contacts include Jason Gates as the primary point of contact and Jim Farris as the project manager, both reachable through the Port of Seattle’s official communications. The solicitation was posted on July 31, 2026, with performance expected to occur at the airport location, though specific geographic details are not defined in the provided data.
Aviation Facilities & Infrastructure

POSTED

about 7 hours ago

DEADLINE

N/A
View Details
NAICS: 541330
New
SEEKING QUALIFIED SUBCONSULTANTS IN RIVERSIDE COUNTY/SOCAL TO SUPPORT WELL REPLACEMENT PROJECT WITH WATER DISTRICT
Solicitation # seeking-qualified-subconsultants-riverside-countysocal-support-well-replacement-project-water
GHD Inc. is inviting qualified small and disadvantaged businesses, including DBE, SBE, WBE, MBE, and other certified firms, to submit qualifications for participation in the Corydon Well Replacement Design Project under Elsinore Valley Municipal Water District, located in Riverside County and Southern California. The scope of work encompasses a broad range of professional services such as engineering, environmental analysis, surveying, geotechnical studies, permitting, public outreach, and utility location, with relevant NAICS codes covering architecture, engineering, and specialized technical services. The project emphasizes inclusion and compliance with SBA set-asides for Small Business, Small Disadvantaged Business, Women-Owned Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business, as well as DBE status under the Department of Transportation. Firms interested in participating must contact Charlie Brown at charles.brown@ghd.com by August 7, 2026, to request solicitation documents and submit their qualifications package. The deadline to receive all solicitation materials is 5 p.m. PST on Friday, August 14, 2026, with a final response deadline of September 15, 2026. All work is expected to be performed within California, and participation is open to firms certified under federal and state disadvantaged business programs. The opportunity is advertised through the SBA’s opportunity portal, ensuring alignment with federal small business procurement goals.
GHD Inc.

POSTED

about 12 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541330
New
Engineering Design Services
Solicitation # engineering-design-services
The contract seeks engineering design services to develop detailed drawings required for the installation of a lifeboat davit on an existing pier located in Oregon. The project involves providing technical specifications and plans that ensure safe and compliant integration of the davit system with the current pier structure, adhering to applicable maritime and safety standards. All deliverables must be submitted by the deadline of August 6, 2026, and the solicitation is restricted to small business entities including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, Veteran-Owned Small Businesses, and Service-Disabled Veteran-Owned Small Businesses as defined by the SBA. The contracting agency is the Tongue Point Job Corps, operating under NAICS code 541330 for architectural and engineering services. The primary point of contact for inquiries is Elizabeth Williamson, reachable via email at williamson.elizabeth@jobcorps.org or by phone at 503-338-5014. The work will be performed on-site in Oregon, though no specific city or zip code is provided. This solicitation is posted under the SBA’s opportunity portal and does not include a physical office address, reflecting its administrative nature. Proposals must demonstrate technical capability to deliver accurate, buildable engineering drawings that meet all regulatory and operational requirements for maritime safety equipment installation.
Tongue Point Job Corps

POSTED

about 12 hours ago

DEADLINE

in 2 days
View Details
NAICS: 541330
New
Corydon Well Replacement (C2305)
Solicitation # corydon-well-replacement-c2305-1
Ardurra Group, Inc. is soliciting proposals from Disadvantaged Business Enterprise (DBE) firms to provide comprehensive design, bidding support, and engineering services during construction for the Corydon Well Replacement Project in California. The scope of work encompasses a wide range of specialized services including structural, geotechnical, potholing, corrosion analysis, architectural, noise engineering, and surveying, all aimed at supporting the successful execution of the project. This procurement is exclusively targeted toward certified DBE firms as well as other small business categories such as Small Business, Small Disadvantaged Business, Women-Owned Small Business, Veteran-Owned Small Business, and SBA-certified Service-Disabled Veteran-Owned Small Business under a set-aside program administered by the U.S. Small Business Administration. The solicitation is open for responses until August 28, 2026, with the official notice posted on August 3, 2026. Proposals must be submitted through the designated portal, and the primary point of contact for inquiries is Lindsay Stout of Ardurra Group, Inc., reachable via email or phone. The project is classified under NAICS code 541330, though additional applicable codes include 237110, 541490, 90735, 90775, 95826, 92500, and 91831, reflecting the multidisciplinary nature of the services required. Performance of the work is expected to occur in California, and interested firms are encouraged to review the full details on the official portal for specific submission guidelines and requirements.
Ardurra Group, Inc.

POSTED

about 12 hours ago

DEADLINE

in 24 days
View Details
NAICS: 541330
New
Corydon Well Replacement Project - Professional Design, Bidding Support, Engineering Services During Construction
Solicitation # corydon-well-replacement-project-professional-design-bidding-support-engineering-services-during-0
The Corydon Well Replacement Project, managed by the Elsinore Valley Municipal Water District, entails comprehensive professional design, bidding support, and engineering services during construction for a well replacement initiative located in Lake Elsinore, California. The solicitation, identified as C2305, seeks qualified firms to deliver full-service engineering solutions spanning the planning, design, and construction phases, with a focus on ensuring compliance, efficiency, and seamless project execution. The contract is open to Disadvantaged Business Enterprises in alignment with Department of Transportation set-aside guidelines and falls under NAICS code 541330 for architectural and engineering services. Proposals must be submitted by September 1, 2026, with AKM Consulting Engineers serving as the contracting agency and primary point of contact. Katie Neubauer can be reached for further inquiries via phone or email provided in the solicitation. The project demands technical expertise in water infrastructure, regulatory coordination, and construction oversight, with all work performance centered in Riverside County, California. Interested parties are directed to the official solicitation link for additional details and submission requirements.
AKM Consulting Engineers

POSTED

about 12 hours ago

DEADLINE

in 28 days
View Details
NAICS: 541330
New
Corydon Well Replacement Project – Professional Design, Bidding Support and Engineering Services During Construction
Solicitation # corydon-well-replacement-project-professional-design-bidding-support-engineering-services-during-1
The Corydon Well Replacement Project seeks qualified firms to provide comprehensive professional design, bidding support, and construction engineering services for the replacement of an existing municipal groundwater production well with a new facility on Elsinore Valley Municipal Water District property in California. The project encompasses the full lifecycle of well acquisition, from initial hydrogeological evaluation and aquifer analysis through design, construction, testing, and eventual abandonment of the old Corydon Well. This includes civil, structural, mechanical, electrical, and instrumentation design for site facilities; borehole geophysical logging and soil investigations; regulatory permitting with the State Water Resources Control Board and local agencies; environmental and water-quality sampling; and full-time on-site construction management and hydrogeological oversight during drilling and equipping phases. The design must adhere to AWWA potable water well standards, match the existing casing depth, specify a 24-inch stainless steel Ful-Flo louvered screen, and comply with the Build America, Buy America Act, requiring domestic sourcing of iron, steel, and other construction materials with documented certification and waiver support. The project is funded in part by a $400,000 Bureau of Reclamation grant, triggering full compliance with federal regulations under 2 CFR Part 200, including debarment and suspension requirements, lobbying restrictions, audit rights, record retention for four years, and Davis-Bacon and Clean Air Act provisions that flow down to subcontracts exceeding $150,000. Firms responding must demonstrate relevant municipal water and groundwater project experience, provide detailed qualifications for key personnel including licenses and resumes, submit a transparent cost proposal broken down by task with hourly rates and incidental charges, and confirm availability to meet the November 2026 start and May 2028 completion window. Proposals must include formal certifications for American Iron and Steel compliance, non-collusion under Executive Order N-6-22, debarment and suspension status via SAM, lobbying restrictions, and insurance requirements, all completed as specified in Attachment 2. All submissions must be made through the EVMWD PlanetBids portal by the September 1, 2026 deadline, accompanied by a cover letter, three references, a conflict of interest disclaimer, and DBE subconsultant participation data. Evaluation will prioritize demonstrated competence and qualifications, with equal weight assigned to technical understanding and project approach, experience, schedule feasibility, innovation, cost-effectiveness, and overall proposal quality. The award will be based on best value, not lowest price,
GEI Consultants, Inc.

POSTED

about 12 hours ago

DEADLINE

in 8 days
View Details
NAICS: 541330
New
SLED
Engineering Services for Yuba City Wastewater Treatment Facility HVAC Improvements Project
Solicitation # 2504-RFP-26
The City of Yuba City is seeking qualified engineering consultants to deliver comprehensive professional services for the replacement and upgrade of the heating, ventilation, and air-conditioning systems at its Wastewater Treatment Facility Laboratory. The scope of work includes evaluating the current HVAC infrastructure and building conditions, diagnosing persistent issues related to temperature control, airflow, ventilation, moisture, and air leakage, and developing, comparing, and selecting viable improvement options. Consultants will be responsible for producing detailed plans, specifications, engineering calculations, and accurate construction cost estimates, as well as providing support during the bidding process and throughout construction to ensure adherence to design intent. Special attention must be paid to maintaining ongoing laboratory operations, incorporating proper commissioning protocols, coordinating with hazardous material protocols, and implementing phased construction or temporary systems to minimize disruption. Proposals must be submitted through Public Purchase by the specified deadline, and all inquiries must be directed via the same platform to ensure transparency and consistency in responses. The solicitation, numbered 2504-RFP-26, was posted on August 3, 2026, with responses due no later than September 4, 2026. Proposals will be evaluated and ranked based on criteria outlined in the request, with selection determined by technical merit and capability rather than price alone. The point of contact for questions is Nicholas Menezes, who can be reached via email or phone, and all updates, addenda, and responses to inquiries will be posted exclusively on Public Purchase, making it mandatory for proposers to regularly check for new information. The project is being managed by the City of Yuba City’s Public Works Department under the State of California, with performance required on-site at the wastewater treatment facility in Yuba City.
City of Yuba City

POSTED

about 12 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541330
New
SLED
ARCHITECTURE/ENGINEERING PROFESSIONAL SERVICES FOR SMALL PROJECTS (CATEGORY B)
Solicitation # URFP-125552
Virginia Polytechnic Institute and State University is seeking qualification statements from architecture and engineering firms authorized to do business in Virginia for small-scale professional services under solicitation URFP-125552. This solicitation is open for submissions until July 31, 2031, and is intended to establish a pool of qualified firms capable of performing limited scope design and engineering projects across various campus locations, primarily in Blacksburg, VA, but potentially at other Virginia Tech sites. The effort is categorized as Category B and is designed to streamline the procurement process for smaller projects that do not require full competitive bidding. Firms interested in participating must demonstrate their experience, credentials, and capability to deliver high-quality architectural and engineering services under this long-term framework. All responses must be submitted through the designated vendor portal, and inquiries should be directed to Kimberly Widrig at kdcromer@vt.edu or 540-231-8543. The solicitation does not specify a set-aside classification or NAICS code, indicating a broad eligibility for qualified A/E firms regardless of size or ownership status, provided they are properly licensed and in good standing to operate within the Commonwealth of Virginia.
Virginia Polytechnic Institute and State University

POSTED

about 12 hours ago

DEADLINE

in almost 5 years
View Details
NAICS: 541330
New
SLED
Worth County RFP Engineering Grant Services
Solicitation # PE-77201-NONST-2027-000000026
The Worth County Board of Commissioners is seeking qualified engineering firms to provide a broad range of professional services to support community and economic development initiatives funded by state and federal programs. Firms must be technically competent and properly licensed in Georgia to deliver services including preliminary engineering reports, cost estimates, project planning, surveys, design, permitting support, construction documentation, bidding assistance, construction administration, resident inspection, and project closeout. The County intends to establish one or more contracts, with one potential base agreement for general engineering services and additional task-specific contracts or addendums issued on a project-by-project basis for initiatives funded through programs such as CDBG, CDBG-EIP, GEFA, ARPA, GTIB, and LMIG. Selection through this process does not guarantee assignment to any specific project. Proposals must be submitted by September 4, 2026, and only firms capable of demonstrating successful experience working with local governments on federally and state-funded projects will be considered. All responses must be directed to Nicole Jones at the provided contact information, and submissions must comply with the requirements outlined in the solicitation.
Worth County Board of Commisioners

POSTED

about 13 hours ago

DEADLINE

in about 1 month
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 332722
New
DIBBS
First Article Testing (FAT) and Government Test Unit ProductionThe contract requires the production and submission of government test units under CLIN 0002 and CLIN 0003 for First Article Testing, with full documentation including a comprehensive FAT report, inspection at the manufacturing origin, and delivery within specified timeframes of 210 and 296 days ADO respectively. The effort is part of a subcontract under the Department of Defense’s ASC Commodities Division, with a NAICS code of 332722 indicating precision instrument manufacturing, and is focused on delivering qualified test units that meet rigorous government technical and procedural standards. The timeline is tightly defined, and the requirement for complete documentation and on-site inspection ensures traceability and compliance before acceptance. The solicitation, posted on August 3, 2026, has a response deadline of August 17, 2026, and is accessible via the DIBBS platform. Although no set-aside type or specific point of contact is provided, the place of performance and organization details indicate this is a federal defense procurement with expectations for full adherence to military quality assurance protocols. Participation requires the ability to manage complex production timelines, document every stage of manufacturing and testing, and coordinate with government inspection teams to validate conformance prior to final delivery.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541611
New
DIBBS
Commercial Item Subcontract ManagementThe contract titled Commercial Item Subcontract Management requires the successful offeror to oversee and manage subcontracts for commercial products in full compliance with Federal Acquisition Regulation 52.244-6 and Defense Federal Acquisition Regulation Supplement 252.244-7000. This includes the accurate and complete flow-down of all applicable clauses to subcontractors and ensuring that small business participation is properly integrated throughout the supply chain in alignment with the stated set-aside requirements. All subcontracting activities must adhere to the standards established for commercial item acquisition while maintaining rigorous documentation and oversight to demonstrate compliance. This solicitation is designated as a Total Small Business Set-Aside under FAR 19.5, meaning only small businesses are eligible to compete, and the North American Industry Classification System code 541611 applies, indicating the work involves management, scientific, and technical consulting services. The contracting activity is under the ASC Commodities Division of the Department of Defense, and responses must be submitted by August 13, 2026. The contract is intended to support commercial item procurement efforts with a strong emphasis on fostering small business involvement across all levels of subcontracting.
Administrative Management and General Management Consulting Services

POSTED

about 11 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541511
New
DIBBS
Cybersecurity and Covered Defense Information SafeguardingThis contract requires the implementation and maintenance of cybersecurity controls aligned with NIST SP 800-171 to protect covered defense information as mandated by DFARS 252.204-7012, ensuring compliance with federal security standards for sensitive defense data. The work is classified as a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, and is governed by the NAICS code 541511, which pertains to custom computer programming services. The contract is administered by the ASC Commodities Division within the Department of Defense and places no specified location for performance, indicating flexibility in execution as long as compliance obligations are met. Respondents must submit proposals by the deadline of August 13, 2026, with the solicitation posted on August 3, 2026, through the DIBBS platform. Although no point of contact or physical performance location is provided, the expectation is for contractors to establish and sustain a verifiable, auditable cybersecurity posture throughout the contract period. The emphasis is on continuous compliance with NIST controls to safeguard covered defense information, and failure to maintain these standards could result in contract termination or penalization under applicable defense acquisition regulations.
Custom Computer Programming Services

POSTED

about 11 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334511
New
DIBBS
Qualified Product/Manufacturer Sourcing AgentThe contract seeks a qualified small business to source defense-compliant electronic components in accordance with MIL-DTL-24779D specifications and H02 clause requirements, ensuring all products originate exclusively from manufacturers or suppliers listed on the Qualified Products List or Qualified Manufacturers List. The role involves identifying, vetting, and procuring components that meet stringent military standards, with the expectation that all sourcing activities adhere to the technical and compliance frameworks established by the Department of Defense. The effort is classified as a total small business set-aside under FAR 19.5, restricting eligibility exclusively to small businesses as defined by the SBA, with the NAICS code 334511 indicating the industry focus on electronic component manufacturing. The solicitation, issued by the ASC Commodities Division under the Department of Defense, requires full responsiveness to the referenced specifications and compliance with all associated military standards. Responses are due by August 13, 2026, and the contract will be executed as a subcontract. While no point of contact or physical performance location is provided, the work is expected to support defense electronics supply chains through rigorous supplier qualification and component sourcing processes. All activities must ensure traceability, authenticity, and regulatory alignment with current DoD procurement guidelines.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON H
Solicitation # SPE4A6-26-T-11KT
The contract is for 11 units of a hexagon cap screw identified by NSN 5305-01-710-8361, with a delivery requirement of 100 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger procurements, unless amended. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated; critical, major, and minor attributes are verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The item contains technical data subject to export controls under ITAR or EAR, requiring prior authorization for any export or disclosure to foreign persons, whether in the U.S. or abroad, and DFARS 252.225-7048 applies. Access to this controlled data is restricted to DLA contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and prior DLA authorization. The solicitation number is SPE4A6-26-T-11KT, issued on August 3, 2026, with responses due by August 11, 2026, under NAICS code 332722, and performance is to occur in Tracy, California, with primary point of contact Molitauoleava Langi.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 8 days
View Details