This Subcontract opportunity from Texas was posted on February 5, 2024. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Quality Assurance and Inspection Support

Closed

State & Local

Submission Closed02/26/2024, 06:00:00 PM CST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380

New

RFQ#9783 Respirable Crystalline Silica Exposure Assessment

Solicitation # RFQ#9783

Management & Training Corporation (MTC) is soliciting bids under RFQ#9783 for a subcontracting opportunity to conduct a Respirable Crystalline Silica Exposure Assessment at the Edison Job Corps Center in Edison, New Jersey. The project requires a qualified industrial hygiene consultant to evaluate the Brick Trade training program, specifically focusing on 27 potentially exposed students and instructors involved in activities such as fire clay mixing and brick cutting. The scope of work includes performing site assessments, implementing a personal breathing-zone air sampling plan, and comparing results against OSHA permissible exposure limits and action levels. Deliverables consist of a written report, laboratory results, exposure calculations, and a prioritized corrective action plan for reducing exposures. This is a fee-for-service contract awarded on a best-value basis. Interested offerors must submit a lump sum bid, a completed supplier packet including Form W-9 and self-certification, proof of insurance, and three professional references by November 6, 2026. The solicitation is open to various small business set-asides, including VOSB, SDVOSB, WOSB, and HUBZone. Awardees must comply with Service Contract Labor Standards for Middlesex County, New Jersey, and adhere to strict federal guidelines regarding the protection of sensitive information and the Buy American Act. First-tier subcontractors with contracts exceeding 45,000 dollars must also provide disclosures regarding government debarment or suspension.

POSTED

DEADLINE

First Article Testing and Validation ServicesThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, requires First Article Testing and Validation Services for grooved headed pins. The selected provider will validate manufacturing processes for prime contractors by verifying material properties and dimensions against Drawing NR 19200 12579607 and Drawing NR 19204 8448502. Using CMM and metrology equipment, the contractor must ensure all components meet the strict qualification standards required for Critical Application Items, ultimately delivering a validated sample part and a comprehensive First Article Test Report. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380. Interested parties must submit their responses by November 20, 2026. This procurement focuses on ensuring high-precision quality control and technical compliance for essential supply chain components delivered to the DLA.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Contractor First Article Test (CFAT) ServicesThis subcontract for Contractor First Article Test (CFAT) Services is issued by the Department of Defense under the Land Supplier Operations SMSG. The primary objective is to perform First Article Testing to validate the technical acceptability of items delivered by prime contractors under DLA supply contracts. The scope of work includes executing the Contractor First Article Test on sample units and conducting production lot testing for up to 250 units to ensure strict compliance with government specifications. The successful contractor is responsible for delivering a validated First Article Test report and final production approval. This opportunity falls under NAICS code 541380 and was posted on November 6, 2026, with a response deadline of December 7, 2026.

LAND SUPPLIER OPERATIONS SMSG

POSTED

DEADLINE

First Article Testing (FAT) and Production Lot TestingThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, involves providing specialized testing and validation services for prime contractors. The scope of work focuses on executing Contractor First Article Testing and Production Lot Testing in strict accordance with PGN-09-01 and PGN-09-08 guidelines. Specifically, the contractor will utilize material testing and metrology laboratories to verify alloy strength, tolerances, and dimensions for NSN 5315-00-992-6653, culminating in the delivery of formal test reports. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380. Interested parties must adhere to the timeline established by the posting date of November 6, 2026, with a response deadline set for November 20, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

GEOTECHNICAL SERVICES FOR CITY

Solicitation # RFP 27-49

The City of Charlottesville, through its Public Works Capital Development Department, is soliciting proposals under RFP 27-49 to establish a term contract for as-needed geotechnical testing and consulting services. The scope of work involves evaluating subsurface conditions and earth materials to support the planning, design, and construction of various city-owned assets, including government and educational facilities, utility systems, roads, bridges, and stormwater management facilities. Selected consultants must provide geotechnical exploration, laboratory services, and concise reporting, with the ability to respond to task orders within 48 hours. All services must be performed by licensed Virginia personnel in accordance with ASTM standards and applicable local, state, and federal building codes. The City will select two or more offerors based on professional qualifications and proposed services, ranking them by merit. The highest-scoring offeror will be designated as Primary, followed by a Secondary and additional ranked consultants. Evaluation is based on experience, portfolio, and the ability and availability of staff. The contract includes strict compliance requirements, such as nondiscrimination provisions for subcontracts over 10,000 dollars, a drug-free workplace clause for contracts over 10,000 dollars, and mandatory insurance endorsements naming the City as an additional insured. Proposals must be submitted electronically via the OpenGov portal by November 17, 2026, and must include a table of contents and signatures from an authorized representative.

Public Works - Capital Development

POSTED

DEADLINE

Aerospace Component Testing and CalibrationThis subcontract for Aerospace Component Testing and Calibration supports US Navy Navsup Weapon Systems Support projects by providing specialized testing, inspection, and calibration of actuator components for prime contractors. The scope of work includes recording dimensional data via Coordinate Measuring Machines, verifying material and finish, and ensuring all test equipment is calibrated to ANSI/NCSL Z540.3 or ISO-10012-1 standards. The selected provider must maintain ISO 9001/AS9100 certification and is responsible for delivering detailed inspection reports and calibration certificates. This opportunity falls under NAICS code 541380 and was posted on November 6, 2026, with a response deadline of November 12, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Gas Purity and Equipment Cleanliness TestingThis small business set-aside subcontract involves providing specialized laboratory testing and certification services for prime contractors at the Portsmouth Naval Shipyard in Groton. The scope of work focuses on verifying the purity of Nitrogen gas and the cleanliness of associated piping to ensure strict adherence to A-A-59155 Grade A or MIL-PRF-27401 Type I standards for gas, and UIPI 0505-908 Level II and III standards for piping. To achieve these certifications, the contractor will utilize gas chromatography and borescope tools to perform the necessary inspections. The primary deliverables for this engagement include the provision of formal Certificates of Compliance and detailed Test and Inspection Reports to the Department of Defense.

Portsmouth Naval Shipyard Gf

POSTED

DEADLINE

B533--VANIHCS SPS Water Testing (VA-27-00000760)

Solicitation # 36C25027Q0096

250-NETWORK Contract Office 10 (36C250)

POSTED

DEADLINE

F103--D AND D LABORATORY STEAM & WATER TESTING

Solicitation # 36C24627Q0096

Solicitation 36C24627Q0096 is a request for quotes issued by the Department of Veterans Affairs Network Contracting Office 6 for laboratory steam and water testing services. The contract supports the Durham VA Medical Center and its Community Based Outpatient Clinics in Greenville and Garner, North Carolina. The primary objective is to ensure that critical and utility water systems used in sterile processing services meet the rigorous standards set by the National Program Office for Sterile Processing Service and the Office of Healthcare Environment and Facilities Program. Required services include monthly sampling and testing for endotoxins, bacteria, pH, conductivity, alkalinity, and total hardness. This opportunity is a total set-aside for certified Veteran-Owned Small Businesses (VOSB) under NAICS code 541380. The contract structure includes a base period from November 10, 2026, to November 9, 2027, with multiple option periods extending through November 9, 2031. Award will be based on the Lowest Price Technically Acceptable (LPTA) method, evaluating offerors on their technical and management approach, capability to perform, and a history of at least two similar contracts completed within the last three years. Contractors must adhere to strict safety and quality standards, including OSHA and NFPA regulations, and provide calibration certifications for all test equipment traceable to a national standard. Invoicing must be submitted monthly in arrears through the OB10 e-Invoicing network. The deadline for response is November 9, 2026, at 9:00 AM EST.

246-NETWORK Contracting Office 6 (36C246)

POSTED

DEADLINE

Synopsis – Chemical Sampling and Testing of Dredged Material for USACE New York District

Solicitation # W912DS27BA002

POSTED

DEADLINE

Underground Storage Tank Calibration ServicesThis subcontract involves providing technical calibration services for a 25KL underground fuel storage tank located in Faisalabad, Pakistan, for projects associated with Pakistan State Oil Company Ltd. The selected provider will be responsible for conducting precise volumetric or geometric measurements to establish volume-to-height relationships, utilizing intrinsically safe tools and precision equipment to develop certified dip charts. To qualify, the contractor must hold certification from a recognized weights and measures authority. The primary deliverables for this engagement are a certified Calibration Report and a corresponding Volume Chart. Interested parties must respond by November 12, 2026.

Pakistan State Oil Company Ltd

POSTED

DEADLINE

RFP IC-32097-AS (Calibration of 25KL Underground Fuel Storage Tank at Munck IC-Site Faisalabad)

Solicitation # IC-32097-AS

Solicitation IC-32097-AS is issued by the Pakistan State Oil Company Ltd for the calibration of a 25KL underground fuel storage tank located at the Munck IC-Site in Faisalabad, Pakistan. This procurement opportunity was posted on November 6, 2026, with a response deadline set for November 12, 2026, at 09:15:00Z. The project focuses on technical calibration services for fuel storage infrastructure within the Faisalabad region. Interested parties may coordinate through the primary point of contact, Arslan Sajjad, via the provided organizational email. While specific pricing, detailed statements of work, and evaluation factors were not detailed in the provided documentation, the solicitation is managed through the Ariba procurement portal.

Pakistan State Oil Company Ltd

POSTED

about 6 hours ago

DEADLINE

in 6 days

AI Contract Overview

The Quality Assurance and Inspection Support subcontract is issued by the Texas Department of Criminal Justice Correctional Institutions Division. The primary objective of this agreement is to facilitate origin inspections and sample testing to verify that all goods strictly conform to established TDCJ specifications. This role requires active coordination between suppliers and state inspectors to maintain quality standards. The opportunity was posted on February 5, 2024, with a response deadline of February 27, 2024. It is categorized under NAICS code 541380, focusing on testing laboratories. Interested parties can find further details through the Texas SmartBuy portal.

General Info

Agency

Texas Department of Criminal Justice Correctional Institutions Division

NAICS

541380 - Testing Laboratories and Services

Place of Performance

TX, USA

Set-Aside

NONE

Documents

This scope was carved out of IW174691.

The full solicitation package (5 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Mobile Shower Trailer Region IV

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedFeb 5

subcontract

Response DeadlineFeb 26

Deadline has passed

Submission Closed

02/26/2024, 06:00:00 PM CST

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyTexas Department of Criminal Justice Correctional Institutions Division

ContactsNo contacts available

OfficeN/A

Organization / AgencyTexas Department of Criminal Justice Correctional Institutions Division

Office AddressN/A

ContactsNo contact information available

Full Description

Support origin inspections and sample testing to ensure goods conform to TDCJ specifications, with coordination between suppliers and state inspectors.