Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Quality Assurance and Non-Conformance Resolution Services

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails comprehensive quality assurance and non-conformance resolution services for metal bar deliveries to the Defense Logistics Agency under the Department of Defense. Responsibilities include inspecting and analyzing all non-conforming shipments, identifying root causes of defects or deviations, coordinating rework activities to bring materials into compliance, and resubmitting corrected documentation to ensure regulatory and contractual adherence. The work requires meticulous attention to detail and a systematic approach to quality control throughout the entire correction cycle, from initial detection to final approval and resubmission. The contract is classified as a subcontract with a NAICS code of 811211 and was posted for potential bidders on June 25, 2026, with performance expected to meet DLA standards without specification of a geographic location.

General Info

Quality assurance and non-conformance resolution for metal bars to Defense Logistics Agency under DoD standards.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

811211 - Consumer Electronics Repair and MaintenanceView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE8E4-26-T-0753.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BAR, METAL

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJun 25

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Inspect, analyze, and correct non-conforming metal bar deliveries, including root cause analysis, rework coordination, and resubmission of corrected documentation to DLA.

Similar Contracts

Same NAICS industry code

Marine Electronics Warranty and Technical Support

W6QM Micc-Ft Drum

POSTED

DEADLINE

Pressure Transmitter Repair and Modification

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

2-Year Instrument Maintenance Contract

USDA Forest Service

POSTED

DEADLINE

Medical Equipment MaintenanceThis subcontract opportunity for Medical Equipment Maintenance involves performing corrective repairs and preventative maintenance on clinical equipment for prime contractors working on Chesterfield County Sheriff's Department jail projects. The selected provider must utilize calibration tools and replacement parts to ensure all medical equipment is fully functional and must provide detailed maintenance logs as part of the deliverables. Qualified candidates must hold a Biomedical Equipment Technician certification and operate under NAICS code 811211. The solicitation was posted on September 4, 2026, with a response deadline of September 21, 2026. This project is managed by Chesterfield County in South Carolina.

Chesterfield County

POSTED

DEADLINE

Laser System Preventive Maintenance and SupportThis subcontract for the Defense Health Agency Hcd West involves providing ongoing preventive maintenance and technical support for ophthalmic lasers at JB Elmendorf AFB. The selected provider will perform routine calibration and hardware checks using specialized diagnostic tools to ensure the laser systems remain fully operational, with all work documented in detailed maintenance logs. The opportunity is a sole source set-aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 811211. A critical requirement for this contract is that the performing technician must hold manufacturer-certified biomedical technician status specifically for Lumenis systems. The response deadline for this requirement is September 18, 2026.

Defense Health Agency Hcd West

POSTED

DEADLINE

YELL - 17309 - Replace Yellowstone's Mobile and Portable LE RadiosThe Department of the Interior is seeking to replace the existing fleet of Motorola 6000 portable and 6500 mobile radios used by Yellowstone Law Enforcement, as these models are no longer supported by the manufacturer. This requirement is currently listed as a forecast under NAICS code 811211. The procurement process is managed by the National Park Service, with Cam Sholly serving as the primary point of contact. Interested parties can find further details through the acquisition gateway using the reference YELL - 17309.

POSTED

DEADLINE

Certified Small Arms Maintenance and Armorer ServicesThe Certified Small Arms Maintenance and Armorer Services subcontract, issued by the Department of Defense via Navsup Flt Logistics Ctr Norfolk, requires the performance of armorer-level maintenance and repair on NCIS standard-issue weapons and Navy common small arms. The scope of work involves maintaining and certifying platforms from Glock, Sig Sauer, ArmaLite, Mossberg, Benelli, and Remington using manufacturer-specific toolkits. Deliverables include fully maintained and certified weapon systems along with detailed maintenance logs. This opportunity is an 8(a) set-aside under NAICS code 811211, with the place of performance located in Quantico, Virginia. Qualified providers must possess a Secret clearance, NAC suitability, and the necessary manufacturer certifications to perform the work. The response deadline for this requirement is September 16, 2026.

Navsup Flt Logistics Ctr Norfolk

POSTED

DEADLINE

CSM Warranty, Calibration, and Technical Support Services

FA4600 55 Cons Pkp

POSTED

DEADLINE

Hearing Aid Maintenance and Repair

California Department of Corrections & Rehabilitation

POSTED

DEADLINE

Emergency Radiology DR Detector Repair and CalibrationThe Department of Veterans Affairs, through Network Contracting Office 6, is seeking a subcontractor to provide emergency repair, diagnostics, parts replacement, and calibration for a Philips Digital Radiography detector. The work will be performed at the Salem VA Medical Center to ensure the equipment is restored to full operational functionality in accordance with medical imaging standards. This subcontract opportunity falls under NAICS code 811211 and was posted on August 26, 2026. The primary objective is to restore critical radiology capabilities through specialized technical services and equipment calibration to maintain patient care standards.

246-NETWORK Contracting Office 6 (36C246)

POSTED

DEADLINE

Building Code Compliance and Final Inspection CoordinationThis subcontract, titled Building Code Compliance and Final Inspection Coordination, is issued by the Government of Jamaica through the Ministry of Agriculture Fisheries and Mining. The primary objective of the agreement is to ensure that staircase construction adheres to all applicable local building, fire, and safety codes. The scope of work includes the coordination of any necessary third-party inspections or certifications required to verify compliance. This project is categorized under NAICS code 811211 and was posted on August 24, 2026.

Ministry of Agriculture Fisheries and Mining

POSTED

DEADLINE

Preventive Maintenance of Diesel Standby GeneratorsThe American Consulate Jeddah, under the Department of State, is seeking a subcontractor for the preventive maintenance of low-voltage diesel standby generators. The scope of work includes performing scheduled inspections, fluid and filter replacements, greasing, valve lash adjustments, and critical electrical testing, such as Megger tests, to ensure operational reliability. This opportunity is categorized under NAICS code 811211 and will be performed in Jeddah, Saudi Arabia. Interested parties must submit their responses by the deadline of September 15, 2026, at 2:00 PM.

American Consulate Jeddah

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2418

This contract, identified as SPE7L7-26-Q-2418, is a firm fixed price solicitation by the Defense Logistics Agency for the procurement of sealed lead acid storage batteries (NSN 6140-01-624-9682). The requirement consists of two line items totaling eight units, with delivery expected 60 days after the order. This is a restricted source item requiring government engineering source approval, and it is designated as a critical application item. The batteries have a non-extendable shelf life of 12 months and must comply with specific hazardous material communication and packaging standards, including MIL-STD-2073-1E and MIL-STD-129. Quality assurance will be managed via zero-based sampling plans according to MIL-STD-1916 or ASQ H1331. Shipments are destined for locations in Oregon and Hawaii, with strict prohibitions against the intentional addition of mercury except where functionally required.

Battery Manufacturing

POSTED

about 10 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2419

This contract is a solicitation for the procurement of five storage batteries, part number PS-12100 F1 from Power-Sonic Corporation, under NSN 6140-01-294-6528. The items are designated as critical application items and must feature F1 quick disconnect tabs. The contract is established as a firm fixed price agreement with a delivery requirement of 60 days after the order is placed. Each unit is destined for a specific naval vessel, including the USS Stout, USS Laboon, USS Barry, USS Russell, and USS John S McCain. The batteries are classified as Type I items with a non-extendable shelf life of 12 months. Strict adherence to hazardous materials packaging, marking, and shipping standards is required, specifically prohibiting the intentional addition of mercury except where functionally necessary. Quality assurance will be managed through zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. All packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with inspection and acceptance occurring at the point of origin.

Battery Manufacturing

POSTED

about 10 hours ago

DEADLINE

BATTERY ASSEMBLY

Solicitation # SPE7L7-26-Q-2417

This solicitation from the Defense Logistics Agency under the Department of Defense is for the procurement of two battery assemblies, identified by NSN 6140-01-664-6369. The contract requires delivery within 60 days after receipt of the order. Strict compliance is required regarding cybersecurity and export controls. The provider must be a CMMC Level 2 Certified Third-Party Assessment Organization and adhere to regulations concerning Covered Defense Information. Additionally, the technical data is subject to ITAR and EAR export controls, meaning access is limited to contractors with an approved US/Canada Joint Certification Program certification and completed DLA export-control training.

Battery Manufacturing

POSTED

about 10 hours ago

DEADLINE

LIMITER, RADIO FREQU

Solicitation # SPE4A7-26-Q-1069

The Defense Logistics Agency within the Department of Defense has issued solicitation SPE4A7-26-Q-1069 for the procurement of 49 radio frequency limiters. The items are identified by NSN/Part Number 1430-01-224-2273 and are associated with purchase request 7017409812. This federal solicitation was posted on September 11, 2026, with a response deadline of September 15, 2026. Interested parties should direct inquiries to the buyer via the DIBBS portal or the provided contact email.

Other Electronic Component Manufacturing

POSTED

about 10 hours ago

DEADLINE

COVERALLS, ANTI-EXPO

Solicitation # SPE1C1-26-Q-0498

The Defense Logistics Agency under the Department of Defense has issued solicitation SPE1C1-26-Q-0498 for the procurement of one unit of anti-exposure coveralls, identified by NSN/Part Number 8415-01-593-7934. This federal requirement is tracked under purchase request 7018286739. The solicitation was posted on September 11, 2026, with a response deadline of September 18, 2026. Interested parties should direct all inquiries to the buyer via the email address provided in the primary point of contact or through the DIBBS portal using the specific solicitation number.

Cut and Sew Apparel Manufacturing (except Contractors)

POSTED

about 10 hours ago

DEADLINE

GOVERNMENT FIT VERIFIC

Solicitation # SPE7L3-26-Q-1328

The Defense Logistics Agency within the Department of Defense has issued solicitation SPE7L3-26-Q-1328 for Government Fit Verific, identified by part number 0001S00000060. This federal procurement opportunity was posted on September 11, 2026, and requires a response by the deadline of September 28, 2026. The contract is managed under purchase request 7017604125, with specific quantity requirements detailed within the solicitation documents. Interested parties can access further details and submission guidelines through the DIBBS portal.

Testing Laboratories and Services

POSTED

about 10 hours ago

DEADLINE

POWER SUPPLY, UNINTERRU

Solicitation # SPE7L7-26-Q-2372

Solicitation SPE7L7-26-Q-2372 is a fixed-price request for quotations issued by the Defense Logistics Agency Land and Maritime for two uninterruptible power supplies, identified by NSN 6130-01-673-0176 and Motorola Solutions part number DSGXT4-1000RT120. The items are designated as critical application items with a 12-month extendable shelf life. Delivery is required within 60 days after order to the USS MARINETTE (LCS 25). Award will be based on the best value to the government, evaluating price, offered delivery, and past performance. The contract mandates strict adherence to military standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Because the items involve sealed lead acid batteries, the contractor must provide Material Safety Data Sheets per FED-STD-313 and comply with hazardous material shipping regulations under IP025. Quality assurance requires sampling according to MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in the sample lot. Additionally, the contractor must complete a CMMC Level 2 self-assessment and utilize the Wide Area WorkFlow system for all invoicing and receiving reports. Inspection and acceptance will occur at the point of origin.

POSTED

about 10 hours ago

DEADLINE

61--BATTERY,STORAGE

Solicitation # SPE7L7-26-T-5218

The Defense Logistics Agency, through DLA Land and Maritime, has issued solicitation SPE7L7-26-T-5218 as a Request for Quotations for three storage batteries, identified by NSN 6140017137559. This procurement is a total small business set-aside under NAICS 335910, with a response deadline of September 21, 2026. The required hardware must meet the specifications for East Penn Manufacturing Co. part number 18-G75-21EE IST6G08-NAV1 and is designated as a critical application item. The items have a non-extendable shelf life of 12 months and must be delivered to NAVSUP FLC Yokosuka in Japan within 20 days after receipt of order. The contract requires strict adherence to packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129, with specific labeling requirements for hazardous materials per the Hazard Communication Standard. Inspection and acceptance will occur at the destination. All quotes must be submitted electronically via the DIBBS system. The award process may utilize automated award and incorporates the HUBZone price evaluation preference. Compliance with various FAR and DFARS clauses is required, including those regarding cybersecurity safeguarding, the Berry Amendment, and the Buy American Act. Invoicing and payment must be processed through the Wide Area Workflow system.

Battery Manufacturing

POSTED

about 15 hours ago

DEADLINE

46--MODIFICATION KIT,WATER

Solicitation # SPE8E8-26-T-5568

Solicitation SPE8E8-26-T-5568 is a Request for Quotations issued by the Defense Logistics Agency Troop Support, Construction and Equipment office, for the procurement of two water treatment equipment modification kits under NSN 4610017148561. The requirement specifically references HDT Expeditionary Systems Inc part number T00012-5083-2. This is a total small business set-aside under NAICS 333310, with a response deadline of September 21, 2026. Delivery is required within 20 days after receipt of order, with the destination for inspection and acceptance located at Camp Pendleton, California. The procurement requires electronic submission of quotes via the DIBBS system. Contractors must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, and follow DLA packaging requirements RP001. Invoicing and payment must be processed through the Wide Area WorkFlow system. Key regulatory compliance includes the Buy American Act, the Berry Amendment, and DFARS cybersecurity requirements for safeguarding covered defense information. Notably, the use of additive manufacturing for the supplied parts is prohibited unless specifically authorized.

Commercial and Service Industry Machinery Manufacturing

POSTED

about 15 hours ago

DEADLINE

61--BATTERY,STORAGE

Solicitation # SPE7L7-26-Q-2412

The Defense Logistics Agency, through DLA Land and Maritime, has issued Request for Quotations SPE7L7-26-Q-2412 for the procurement of 100 nickel-cadmium wet storage batteries (NSN 6140-01-241-2296). These batteries are specified as wet, discharged, and spillable, with a non-extendable shelf life of 36 months. Approved sources include Aerodesign, Inc. (P/N AD-31004-04C) and Marathonnorco Aerospace, Inc. (P/N 31004-04C). The items are to be delivered to the Royal Saudi Air Force within 60 days after the order date. This is a fixed-price solicitation where award will be based on the best value to the government, evaluating technical conformity, past performance, and offered delivery time. Because the batteries are classified as corrosive materials (UN2795), the contractor must strictly adhere to hazardous materials regulations, including ICAO, IMDG, 49 CFR, and AFJMAN 24-204. Packaging must comply with MIL-STD-2073-1E Level B, Pack Code Q, using 4G fiber-board boxes. Inspection will be conducted by DCMA at the distributor or OEM site, with acceptance occurring at the origin. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and receiving reports. The contract incorporates various FAR and DFARS clauses, including the Buy American and Balance of Payments Program and strict cybersecurity reporting requirements under DFARS 252.204-7012. Quotes must be submitted electronically by the deadline of September 17, 2026.

Battery Manufacturing

POSTED

about 15 hours ago

DEADLINE

53--ANODE,CORROSION PREVEN

Solicitation # SPE4A6-26-Q-1423

The Defense Logistics Agency is soliciting quotes for the procurement of six corrosion prevention anodes under National Stock Number 5342013978773. This requirement is identified by solicitation number SPE4A6-26-Q-1423 and is designated as a total small business set-aside under NAICS code 332994. The approved source for this item is 6RDX4 W3T106427. Items must be delivered to DLA Distribution San Joaquin within 190 days after the order is placed. Interested responsible sources must submit their electronic quotes by the deadline of September 21, 2026. The solicitation is available exclusively online via the DIBBS portal, as no hard copies or separate technical drawings are provided.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 15 hours ago

DEADLINE

Supply of Fluid Pressure Regulating Valves (NSN 4820014623023)

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS