Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Quality Assurance and Surveillance Support

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails providing independent quality assurance services to inspect, test, and validate ship repair activities performed at Yokosuka, ensuring compliance with the Quality Assurance Surveillance Plan. The scope includes rigorous monitoring of repair execution, verification of technical standards, and timely response to Letters of Concern and Show Cause Notices issued by the customer. All work must be conducted in accordance with defined surveillance protocols to maintain operational readiness and regulatory adherence. This subcontract, classified under NAICS code 541330, is issued by the Naval Supply Systems Command Fleet Logistics Center Yokosuka, part of the Department of Defense. The opportunity was posted on August 9, 2026, with proposals due by September 10, 2026. Performance is exclusively localized at Yokosuka, requiring on-site presence and direct engagement with naval repair teams. The contract emphasizes accountability, precision, and proactive quality control across all phases of vessel maintenance and repair.

General Info

Provide on-site quality assurance for ship repairs at Yokosuka, ensuring compliance with technical standards and customer notices.

Agency

Department Of Defense → Navsup Flt Logistics Ctr YokosukaView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

Yokosuka, JP-14, JPN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navsup Flt Logistics Ctr Yokosuka
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → Navsup Flt Logistics Ctr Yokosuka
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Independent quality assurance services to inspect, test, and validate ship repair work in accordance with the QASP, including response to LOCs and Show Cause Notices.

Similar Contracts

Same NAICS industry code

NAICS: 541330
New
SLED
Request for Qualifications for Professional Grant Administration and Engineering Services
Solicitation # BD-27-1649-TONTH-TONTH-132119
The Massachusetts town of Northborough, through its agency TONTH - Town Hall, is soliciting qualifications for professional grant administration and engineering services under solicitation number BD-27-1649-TONTH-TONTH-132119. This procurement is targeted toward firms capable of providing engineering services in compliance with 2 CFR 200.320(d), which governs the selection of contractors for federal funding applications, ensuring qualifications are based on competence, experience, and technical capability rather than cost. The opportunity is open to state, local, and educational government entities and is not subject to a specific set-aside designation. Interested parties must submit their qualifications by the deadline of September 10, 2026, at 7:00 PM Eastern Time, with responses directed to the office located at Main Street, Northborough, MA 01532. The solicitation is issued by the Massachusetts agency and the point of contact for inquiries is Scott Charpentier, the designated Purchaser. All work is expected to be performed locally in Northborough, and interested firms can access the full solicitation details through the provided Commbuys portal link. The process emphasizes technical qualifications and alignment with federal grant compliance standards, particularly in engineering support for public infrastructure and grant-related initiatives.
TONTH - Town Hall

POSTED

about 6 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541330
New
Corydon Well Replacement (C2305)
Solicitation # C2305
Ardurra Group, Inc. is soliciting proposals from Disadvantaged Business Enterprises (DBE) for the Corydon Well Replacement Project, a municipal groundwater initiative to design, provide bidding support, and deliver engineering services during construction for a new well to replace and decommission the existing Corydon well in California. The scope spans two phases: Phase 1 includes technical specifications, civil site design, line-bid items for drilling and abandonment of the existing well in compliance with Riverside County and California State Water Resources Control Board requirements, along with full-time on-site construction management oversight; Phase 2 involves detailed architectural, civil, mechanical, structural, electrical, and instrumentation and controls design drawings, plus a line-item bid schedule for equipping, testing, and commissioning the new well. Key deliverables include a Preliminary Design Report at up to 30% design level, review of approximately 200 submittals, assistance with the Domestic Water Supply Permit Amendment, and development of record drawings reflecting field changes, along with support for start-up, commissioning, and operator training. Design criteria require a 24-inch stainless steel Ful-Flo louvered well screen matching existing casing depth, vertical turbine pump equipment, and discharge piping tied into the Corydon Blend station and Malaga blending location, all in accordance with AWWA, SWRCB-DDW, DWR, and EVMWD standards. Proposals must be submitted via the PlanetBids portal by September 1, 2026, with questions due by August 25, 2026, and the project is scheduled to begin on November 2, 2026. The solicitation is set aside for Small Business, Small Disadvantaged Business, Women-Owned Small Business, Veteran-Owned Small Business, SBA-certified Service-Disabled Veteran-Owned Small Business, and Disadvantaged Business Enterprise categories under SBA guidelines. Evaluation is weighted toward relevant qualifications and experience (25%), understanding of project and approach (25%), scope and schedule (20%), innovation (10%), cost (10%), and overall proposal quality (10%), with award based on demonstrated competence rather than lowest price. Contractors must comply with strict federal requirements including Build America Buy America (BABA) provisions, Debarment and Suspension certifications, American Iron and Steel compliance, and prohibitions on covered telecommunications equipment under Section 889. Required submissions include completed Attachments 2 and 3—containing certifications for lobbying,
Ardurra Group, Inc.

POSTED

about 7 hours ago

DEADLINE

in 22 days
View Details
NAICS: 541330
New
Corydon Well Replacement Project - Professional Design, Bidding Support, Engineering Services During Construction
Solicitation # corydon-well-replacement-project-professional-design-bidding-support-engineering-services-during-0
The Corydon Well Replacement Project is a public infrastructure initiative led by the Elsinore Valley Municipal Water District in Lake Elsinore, California, aimed at replacing an existing well with modernized water supply infrastructure. The scope of work encompasses comprehensive professional design services, support during the bidding process to ensure competitive and compliant contractor selection, and ongoing engineering oversight throughout construction to maintain technical integrity, schedule adherence, and regulatory compliance. The project is solicited under bid number C2305 and is governed by NAICS code 541330, classifying it under engineering services. The contracting agency, AKM Consulting Engineers, is managing the procurement and has designated Katie Neubauer as the primary point of contact for inquiries. The bid response deadline is set for September 1, 2026, and the contract opportunity is subject to Disadvantaged Business Enterprise (DBE) participation requirements aligned with Department of Transportation guidelines, encouraging minority- and disadvantaged-owned firms to engage in the bidding process. All work is to be performed at the project site in Riverside County, California.
AKM Consulting Engineers

POSTED

about 7 hours ago

DEADLINE

in 22 days
View Details
NAICS: 541330
New
Corydon Well Replacement Project – Professional Design, Bidding Support and Engineering Services During Construction
Solicitation # WO# C2305
The Corydon Well Replacement Project involves the design and construction support for a new municipal groundwater production well to replace the existing Corydon Well, along with the full abandonment of the old facility, all located on Elsinore Valley Municipal Water District property in California. The scope spans two phases: Phase 1 includes hydrogeological evaluation, aquifer analysis, well design aligned with AWWA standards and California regulatory requirements, civil site design, drilling and abandonment oversight, bidding assistance, and full-time on-site construction management during the drilling phase; Phase 2 covers the engineering design of wellhead and site facilities including architectural, structural, mechanical, electrical, instrumentation and controls systems, as well as support during bidding and construction for equipping and commissioning. The project demands strict adherence to Build America, Buy America Act requirements, ensuring domestic sourcing of iron, steel, and construction materials, with detailed documentation and certification of compliance. All services require coordination with the State Water Resources Control Board, Riverside County, and other local agencies for permitting, environmental reviews, water quality sampling, and regulatory compliance, including NPDES and SWRCB requirements. The contract mandates full-time construction management, QA/QC processes, surveying, geotechnical investigations, soil and corrosion testing, utility locating, and community engagement efforts. The project is partially funded by a $400,000 BOR Grant, triggering federal compliance obligations under 2 CFR Part 200, including audit rights, record retention for four years, debarment and suspension certifications, and anti-lobbying provisions. Contractors must hold current California professional licenses, California Air Resources Board compliance, and Department of Industrial Relations registration if deemed public work. Proposals must include detailed cost breakdowns by task, hourly rates, travel expenses, and demonstrated experience with municipal water projects, with key personnel resumes and certifications required. Evaluation prioritizes technical qualifications and project understanding equally with cost, and award is based on demonstrated competence, not lowest price. Proposals are due via the PlanetBids Vendor Portal by September 1, 2026, with project initiation planned for November 2026 and completion anticipated by May 2028. The total contract value is capped at $1,000,000, and firms are required to submit compliance forms including American Iron and Steel certification, conflict of interest disclosures, executive order certifications regarding Russian sanctions, debarment status, and DBE subcontractor information, with all subcontracts over $150,000
GEI Consultants, Inc.

POSTED

about 7 hours ago

DEADLINE

in 22 days
View Details
NAICS: 541330
New
DIBBS
Quality Inspection and AQL VerificationThis contract entails the independent inspection and verification of kit attributes against specified Acceptable Quality Level standards, with critical defects governed by AQL 0.1 at Inspection Level VII, major defects by AQL 1.0 at Level IV, and minor defects by AQL 4.0 at Level II. The work requires rigorous adherence to statistical sampling protocols to ensure compliance with military-grade quality expectations, emphasizing precision in identifying and classifying defects across all components of the supplied kits. The solicitation is classified as a subcontract under NAICS code 541330, indicating it falls within the scope of scientific and technical consulting services, and is being managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. The opportunity was posted on August 9, 2026, with a response deadline of August 17, 2026, providing a limited window for qualified entities to submit proposals. Performance location details are not specified, and no set-aside status is indicated, suggesting the contract is open to all eligible subcontractors. The point of contact information is not included, and inquiries must be directed through the provided DIBBS portal link to access the full solicitation. Participation requires a thorough understanding of AQL methodologies and the ability to execute inspected audits under strict defense procurement protocols.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → Navsup Flt Logistics Ctr Yokosuka

Same awarding agency

NAICS: 541611
New
Federal
Technical Documentation and CUI Handling SupportThe contract titled Technical Documentation and CUI Handling Support focuses on the secure management and handling of Controlled Unclassified Information, including technical manuals, engineering drawings, and photographs, in full alignment with Navy disclosure protocols and cybersecurity standards. The work involves ensuring that all sensitive documentation is stored, transmitted, and accessed only by authorized personnel using approved secure systems and procedures, with strict adherence to Department of Defense cybersecurity requirements to prevent unauthorized exposure or data loss. The scope requires expertise in document control, classification marking, and cybersecurity compliance specifically tailored to military technical environments. This is a subcontract under the Naval Supply Systems Command Fleet Logistics Center Yokosuka, with performance required at the location in Sasebo, Japan, and the assigned NAICS code of 541611 indicates that the work involves administrative management and general management services supporting technical operations. The solicitation was posted on August 9, 2026, with a response deadline of September 3, 2026, at 01:00 UTC, and interested parties must respond before this time to be considered. Performance of the contract demands rigorous compliance with federal and Navy-specific policies governing CUI, and contractors must demonstrate proven experience in handling sensitive technical data within DoD frameworks, including implementation of NIST SP 800-171 controls and other relevant security measures.
Administrative Management and General Management Consulting Services

POSTED

about 23 hours ago

DEADLINE

in 24 days
View Details
NAICS: 332111
New
Federal
Precision Machining and Fabrication of Replacement PartsThe contract involves the fabrication of high-precision mechanical components including idler shafts and chain sheaves to meet the exact specifications outlined in military drawing No. 101842 and APL 31A080147, with the finished parts destined for integration into the RCSR system. Manufacturing must adhere to stringent military standards to ensure performance, durability, and compatibility within classified defense equipment. The work is classified as a subcontract under NAICS code 332111, indicating primary focus on forging and stamping operations with precision machining capabilities. All components must be produced to exact tolerances and undergo quality verification prior to delivery. Performance of the work is mandated to occur in Sasebo, Japan, with a response deadline of September 3, 2026, and the opportunity was posted on August 9, 2026. The contracting entity is the Navsup Flt Logistics Center Yokosuka, operating under the Department of Defense, which requires full compliance with defense procurement protocols, supply chain security, and delivery timelines. There is no specified set-aside classification, meaning the contract is open to eligible businesses without restriction based on size or ownership, though the location of performance and technical complexity suggest a preference for vendors with prior experience in military-grade mechanical fabrication and familiarity with U.S. defense technical documentation.
Iron and Steel Forging

POSTED

about 23 hours ago

DEADLINE

in 24 days
View Details
NAICS: 541370
New
Federal
Surveying and Site Layout ServicesThe contract is for surveying and site layout services to support building and site improvements, encompassing topographic surveying, boundary verification, and construction layout activities. The work is intended to ensure accurate spatial data and precise positioning for upcoming construction efforts at Sasebo City, with all services required to meet military and federal standards for engineering precision. The solicitation is classified as a subcontract under NAICS code 541370, which covers surveying and mapping services, and is managed by the Naval Supply Systems Command Fleet Logistics Center Yokosuka, a Department of Defense entity. The opportunity was posted on August 9, 2026, with responses due by August 31, 2026, and performance will be conducted entirely at the designated location in Sasebo City. No set-aside provisions are specified, and no point of contact information is provided, suggesting interested parties must review the full solicitation through the provided SAM.gov link to obtain additional details on submission requirements, technical specifications, and qualification criteria. The absence of detailed address information underscores that the contract is focused on field operations at the Sasebo site, with the contractor expected to coordinate logistics, equipment, and personnel on-site to fulfill all deliverables.
Surveying and Mapping (except Geophysical) Services

POSTED

about 23 hours ago

DEADLINE

in 21 days
View Details