Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Quality Assurance Provisions (QAP) and Test Plan Development

Active

Federal

Response Deadline09/18/2026, 10:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → FA8250 Afsc PzaaaView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

UT

Set-Aside

NONE

Documents

This scope was carved out of FA825026Q0023.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

DATA

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 1

subcontract

Response DeadlineSep 18

Submission deadline

Response Deadline

09/18/2026, 10:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA8250 Afsc Pzaaa

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FA8250 Afsc Pzaaa

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Develops technical specifications for testing and inspection for prime contractors on ASDP projects. Creates First Article Acceptance plans, Lot test plans, Acceptance Test Procedures (ATP), and Non-Destructive Inspection (NDI) requirements. Annotates Critical Safety Characteristics (CSI) and Hardness Critical Items (HCI) per ASME Y14.100. Delivers Quality Assurance Provisions (QAP) and annotated test criteria.

Similar Contracts

Same NAICS industry code

Non-Project Specific Request For Qualifications UCLA Health Materials Testing And Deputy Inspection Projects

Solicitation # CP1721

UCLA Health is seeking qualified consultants under solicitation 20260908033 to provide non-project specific materials testing and deputy inspection services. The scope of work covers a wide range of activities, including general and specialized deputy inspections, waterproofing inspections, and destructive or exploratory testing for renovations, infrastructure upgrades, and seismic improvements. Selected consultants will be responsible for the repair or replacement of any building components affected by destructive testing. The contract will be structured as a Professional Services Agreement with an initial term of up to three years, with the possibility of a three-year extension. Services will be performed across various UCLA Health campuses, including Westwood, Santa Monica, West Valley, and the Resnick Mental Health Campus. Interested parties must submit their qualifications by the deadline of September 18, 2026.

POSTED

about 6 hours ago

DEADLINE

Water Quality Analysis and Compliance Testing

250-NETWORK Contract Office 10 (36C250)

POSTED

about 10 hours ago

DEADLINE

Independent Testing and Dimensional Inspection Services

Nswc Indian Head Division

POSTED

about 10 hours ago

DEADLINE

WATER TESTING AT GETTYSBURG NATIONAL MILITARY PARK

Solicitation # 140P4226Q0053

The Department of the Interior, through Ner Services Mabo, is soliciting bids for water testing services at Gettysburg National Military Park in Gettysburg, Pennsylvania. This opportunity is designated as a total set-aside for small businesses under NAICS code 541380. Interested parties must submit their responses by September 21, 2026, at 4:00 PM. The primary point of contact for this solicitation is Deborah Coles, and the administrative office is located in Boston, Massachusetts.

Ner Services Mabo (43000)

POSTED

about 10 hours ago

DEADLINE

IDENTIFY Study Participants – 5-Base Sample Preparation and Whole Genome Multiomic Profiling

Solicitation # 75N98026Q01158

The National Institutes of Health, specifically the Prenatal Genomics and Therapy Section within the National Human Genome Research Institute, is seeking 5-base whole genome sequencing services for plasma-derived cell-free DNA samples from the IDENTIFY study. The project requires 5Base sample preparation and multiomic profiling at 30x coverage to generate high-resolution genomic and epigenomic data from women whose prenatal sequencing suggested maternal malignancy. The primary goal of this acquisition is to produce high-quality data to support computational models for determining the tissue source of incidentally detected maternal cancers. This effort aims to improve the interpretation of prenatal sequencing results, enhance early cancer detection during pregnancy, and advance the broader understanding of circulating cell-free DNA biology. The solicitation is identified as 75N98026Q01158 with a response deadline of September 15, 2026.

National Institutes Of Health

POSTED

about 10 hours ago

DEADLINE

Notice of Intent to Award Sole Source

Solicitation # 1175267

The USDA-ARS is seeking laboratory nutritional analysis services under solicitation 1175267 to support two specific research projects focused on insect nutrition and honey nutrient profiling. The required services involve providing quantitative data on amino acids, fatty acids, vitamins, minerals, sugars, and proximate composition for mono-floral honey samples from Hawaii and enhanced Mediterranean fruit fly diet and insect samples. This data will be utilized to evaluate nutritional quality and support research regarding endangered bird nutrition, insect rearing, and the characterization of Hawaii honeys. This opportunity is listed as a Notice of Intent to Award Sole Source with a response deadline of September 11, 2026. The contract falls under NAICS code 541380 and is managed by the Department of Agriculture, specifically the Csa East 6 Usda-Fs office located in Atlanta, Georgia, with the place of performance situated in Hilo, Hawaii.

Csa East 6 Usda-Fs

POSTED

about 10 hours ago

DEADLINE

New Car Assessment Program (NCAP) Pedestrian Impact Testing

Solicitation # 693JJ926R000073

The National Highway Traffic Safety Administration (NHTSA) is seeking multiple awardees under an indefinite-delivery, indefinite-quantity (IDIQ) contract to perform pedestrian protection impact testing on production motor vehicles. The scope of work includes test-procedure evaluation, impactor qualification, and the execution of headform, Flexible Pedestrian Legform Impactor (Flex-PLI), and upper-legform tests in accordance with US and European NCAP Crashworthiness Pedestrian Protection Test Procedures. Additionally, the contract covers optional cyclist and aPLI testing, as well as active hood sensing tests. Deliverables include detailed NCAP test reports, vehicle condition reports, and quality control packages, with specific timelines for data submission and reporting. Award will be made on a best-value tradeoff basis, where technical factors are deemed more important than price. The evaluation focuses on four equal technical factors: the technical and quality assurance management plan, facilities and equipment, organization and personnel qualifications, and past performance. The contract utilizes firm-fixed-price and cost-reimbursement task orders. Contractors must adhere to strict calibration and qualification standards for test devices and maintain compliance with federal security and privacy protections. Invoicing is processed electronically through the Delphi web-portal, with payments typically issued 30 days after the receipt of a proper voucher.

693JJ9 Nhtsa Office Of Acquistion

POSTED

about 10 hours ago

DEADLINE

Aeration Blower and Silencer Vibration and Shock Fixture Fabrication

Solicitation # N6660426Q0459

Solicitation N66604-26-Q-0459 is a firm-fixed-price request for quotes from the Naval Undersea Warfare Center Division, Newport, for the fabrication and assembly of two specific test fixtures: one CHT Aeration Blower Fixture Assembly and one Discharge Silencer Fixture Assembly. The contractor is responsible for procuring materials, including copper-nickel piping, and performing welding and assembly to replicate a shipboard environment in accordance with Mil-DTL-901E and Mil-Std-167A. The work will be performed at the contractor's facility and at NUWCDIVNPT, where the contractor must provide on-site technical personnel to support government-executed fitment evaluations. Key deliverables include a Fabrication and Inspection Report due within five business days of assembly completion and a final Summary Report detailing fabrication and fitment testing. The desired delivery date for the assemblies is January 15, 2027, with delivery terms set as FOB Destination, Newport, RI. Award is based on the lowest price technically acceptable, with the government reviewing past performance via the Supplier Performance Risk System. Offerors must be registered in SAM, provide a CAGE code for drawing access, and achieve CMMC Level 2 (Self) certification prior to award. Quotes are due by September 11, 2026, and must include all shipping costs within the unit price.

Nuwc Division Newport

POSTED

about 10 hours ago

DEADLINE

(Sole Source) Bode Technology IQAS FB (MA)

Solicitation # SRC0000036068

This sole source master agreement, identified as solicitation SRC0000036068, is established for Bode Technology to provide IQAS FB services to the Alabama Department of Forensic Sciences. The contract is specifically designated for the Mobile Lab 1 facility located in Mobile, Alabama, and remains effective through September 30, 2027. The procurement process requires bid pricing for the specified item lines, with the agency emphasizing that the final award and subsequent purchase orders must remain within the established budget. The solicitation was posted on September 8, 2026, with a response deadline of September 11, 2026, and lists Carla Williams as the primary point of contact.

POSTED

about 19 hours ago

DEADLINE

STE108 SPS Testing

Solicitation # 36C25026Q0904

Solicitation 36C25026Q0904 is a request for quotes for water testing services at the Louis Stokes VA Medical Center and the VA Outpatient Surgery Center in Cleveland, Ohio. This 100 percent small business set-aside is a firm-fixed-price purchase order consisting of a base year starting September 7, 2026, with two potential option years. The scope of work requires the contractor to provide all labor, materials, and equipment to collect and process water samples from the Sterile Processing Service, GI Scope Reprocessing Area, and OSC Scope reprocessing area. Testing must comply with AAMI ST108 and VHA Directive 1116, covering critical and AER water monthly, utility and domestic water quarterly, steam testing quarterly, and dental line testing quarterly. The contractor is also required to provide a handheld resistivity meter, perform monthly calibrations, and deliver a site-specific operation manual and training for staff. Award will be based on the most advantageous offer, considering technical capability, past performance, and price. Submissions must include the offeror's SAM UEI number and a completed price schedule. All written reports must be submitted within five business days of analysis. The deadline for submission is September 10, 2026, at 5:00 pm EST, and all communications should be directed to the contract specialist, Jennifer Nowak.

250-NETWORK Contract Office 10 (36C250)

POSTED

DEADLINE

B--MICROPLASTICS ANALYSIS SAMPLING BASE

Solicitation # 140G0126Q0283

The Department of the Interior, through the Office of Acquisition Grants, is seeking sources for a contract titled Microplastics Analysis Sampling Base. This opportunity is categorized as a sources-sought notice under NAICS code 541380 and is designated as a total small business set aside. The solicitation, numbered 140G0126Q0283, was posted on September 7, 2026, with a response deadline of September 12, 2026. The contracting office is located in Sacramento, California, and the primary point of contact for this requirement is Joel Berberena.

Office Of Acquisiton Grants

POSTED

DEADLINE

Testing & InspectionsThis subcontract opportunity, titled Testing and Inspections, is issued by Filanc for quality control services on Fallbrook Public Utility District projects. The selected contractor will be responsible for conducting material testing, pressure testing, and compliance inspections of installed pipelines, as well as delivering the necessary inspection reports and installation certifications to prime contractors. The solicitation was posted on September 6, 2026, with a response deadline of September 29, 2026. This opportunity is designated for various small business set-asides, including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone, and Veteran-Owned Small Business certifications, falling under NAICS code 541380.

POSTED

DEADLINE

More opportunities from Department Of Defense → FA8250 Afsc Pzaaa

Same awarding agency

Electronic Engineering & Obsolescence Analysis

Engineering Services

POSTED

about 10 hours ago

DEADLINE

Specialized Electronic Component Supply

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 10 hours ago

DEADLINE

Power Supply Unit (PSU) Repair and Refurbishment

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 10 hours ago

DEADLINE

FA8250-26-Q-0741: Repair of NSN: 6130013693392

Solicitation # FA8250-26-Q-0741Update

Solicitation FA8250-26-Q-0741 is a request for firm-fixed-price repair services for one power supply assembly, part number HS10-C1022, NSN 6130013693392, used in the SBIRS AN/2GKC1 application. The contractor is required to provide all facilities, materials, and services necessary to disassemble, inspect, repair, reassemble, align, and functionally test the item to return it to a serviceable, like-new condition. All work must conform to the ESA-approved engineering technical data package, specifically Drawing 177877, and the latest Specification Control Drawing and Acceptance Test Plan listed in the Repair Data List. This opportunity is restricted to prequalified sources. Interested vendors must be fully qualified prior to award, which includes submitting a Source Approval Request package, certifying access to required facilities, and providing a government-approved qualification test plan. A mandatory requirement for award is an active CMMC Level 2 (Self) assessment, with the assessment UID submitted alongside the proposal. Quotes are due by September 14, 2026. The contractor must adhere to strict quality and shipping standards, including MIL-STD-2073-1 for packaging and MIL-STD-129 for marking. All wooden packaging must be heat-treated per ISPM 15 standards. Additionally, the contractor must comply with DFARS 211.274 for unique item identification and follow SAE 5553 for the prevention of counterfeit electronic parts. Asset reporting must be managed through the Commercial Asset Visibility Air Force (CAV AF) system, with daily reporting requirements to ensure accurate government property accountability.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 10 hours ago

DEADLINE

Software and Memory Device Data Documentation

Custom Computer Programming Services

POSTED

DEADLINE

Digitized Legacy Data Conversion and Validation

Computing Infrastructure Providers, Data Processing, Web Hosting, and Related Services

POSTED

DEADLINE

Engineering Design Data and Associated Lists (EDDAL) Development

Engineering Services

POSTED

DEADLINE

Solicitation # FA825026Q0023

This sole source requirement is for the procurement of data from Tracewell Systems for the Department of Defense, specifically the AFSC PZAAA office at Hill AFB, Utah. The contract, identified by solicitation number FA825026Q0023, focuses on the delivery of an Acquisition and Sustainment Data Package consisting of Engineering Design Data and Associated Lists. This data is intended to serve as an authoritative technical description to enable a competent manufacturer to produce items identical to the original in physical, interface, and functional characteristics without additional design effort. Key deliverables include digital product definition data, 3D models, 2D drawings, loft data, and fluid system schematics, all adhering to standards such as MIL-STD-31000 and ASME specifications. The contract mandates strict adherence to quality and security standards. Engineering design data must clearly annotate critical safety characteristics, mission critical features, and quality assurance provisions, including acceptance test procedures and non-destructive inspections. Security requirements include specific markings for export control, controlled unclassified information, and classification levels ranging from unclassified to top secret. Additionally, the data must comply with military standards for shipment and property identification, specifically MIL-STD-129 and MIL-STD-130. Acceptance of scanned images requires an exact overlay and match to the original without distortion.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

Aerospace Component Packaging and ShippingThis subcontract for Aerospace Component Packaging and Shipping involves providing specialized packaging and transportation services for prime contractors on Department of the Air Force projects. The scope of work requires the packaging of 20 gearcase-motor units using anti-static materials, moisture-barrier bags, and custom crates in strict accordance with MIL-STD and 158 Packaging Requirements. The contractor is responsible for coordinating CONUS transport to Hill AFB, preparing necessary DD1348-1 documentation, and ensuring secure delivery to ship-to codes FB2029 or FY2073. This opportunity, managed under NAICS code 484220 for the Department of Defense, has a response deadline of September 10, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Gearcase-Motor Component Overhaul (Condition A)This subcontract for the Department of Defense involves the repair and reassembly of gearcase-motor components for Department of the Air Force projects. The objective is to return assets to Condition A specifications through the use of precision machining, gear grinding, and motor winding tools, concluding with final testing. The contractor is responsible for delivering 20 fully repaired and tested units accompanied by DD1348-1 shipping documents. To be eligible, providers must meet CMMC Level 2 requirements and be qualified per FAR 9.202(a). The opportunity falls under NAICS code 333515 and is managed by the AFSC PZAAA. The response deadline for this requirement is September 10, 2026.

Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

DEADLINE

Gearcase-Motor Teardown and Evaluation ServicesThis subcontract for Gearcase-Motor Teardown and Evaluation Services involves the disassembly, inspection, and evaluation of 20 gearcase-motor components for Department of the Air Force projects. The contractor is responsible for identifying wear and failure points using precision measurement tools for specific NSN units and generating Repairable Item Inspection Reports in accordance with DD Form 1423-1. Final deliverables include Technical Report D001 and detailed repair proposals. The project is managed under NAICS code 811210 for the agency FA8250 Afsc Pzaaa. To be eligible, the contractor must maintain CMMC Level 2 certification and obtain Government Screening Analysis Worksheet approval. The response deadline for this opportunity is September 10, 2026.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

Solicitation# FA825026R0785: Repair of NSN: 3010013155139, and 3010013152424

Solicitation # FA825026R0785

Solicitation FA825026R0785, issued by the Department of the Air Force, seeks a qualified contractor to provide disassembly, inspection, and reassembly services for gearcase-motor components. The scope covers 12 units of NSN 3010013155139 (Part 120624-101) and 8 units of NSN 3010013152424 (Part 120625-101). The process begins with a firm-fixed-price test, teardown, and evaluation phase to determine the condition of the assets. Within 90 calendar days of receipt, the contractor must submit a technical report and a firm-fixed-price proposal for necessary repairs. Following the evaluation, the contractor and the Procurement Contracting Officer will negotiate the scope of work, labor, and costs within a 90-day window. Repair work may only commence after a bilateral contract modification is executed. Authorized repairs must return assets to like-new Condition A specifications. If no repair modification is executed, the contractor must reassemble and return the assets in their original unserviceable condition at no additional cost to the government. This opportunity is restricted to prequalified sources who must meet FAR 9.202(a) requirements and possess an active CMMC Level 2 assessment. Proposals are due by September 10, 2026.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS