Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Quality Assurance Sampling and Inspection Services

Active

Federal

Response Deadline11/06/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Quality Assurance Sampling and Inspection Services is issued by the Department of Defense under the DLA Weapons Support Maritime Supply Chain. The selected provider will perform independent sampling and quality inspections for prime contractors on Navy hardware procurements, ensuring strict adherence to MIL-STD-1916 or ASQ H1331 sampling standards. Key responsibilities include verifying bare item markings against MIL-STD-129, validating packaging according to MIL-STD-2073-1E, and ensuring all traceability documentation meets NAVAIR requirements. The contractor is required to deliver detailed inspection reports and certifications of compliance to validate the quality of the hardware. This opportunity falls under NAICS code 541380 and is designated for performance at FPO 96672. Interested parties must submit their responses by the deadline of November 6, 2026.

General Info

DoD subcontract for Navy hardware quality assurance sampling and inspection services by November 2026.

Agency

Department Of Defense → DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

NAICS

541380 - Testing Laboratories and Services

Place of Performance

FPO, AP, 96672, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M1-27-Q-0102.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

TRANSFORMER, POWER

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 22

subcontract

Response DeadlineNov 6

Submission deadline

Response Deadline

11/06/2026, 05:00:00 PM UTCin 15 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs independent sampling and quality inspection for prime contractors on Navy hardware procurements. Executes sampling per MIL-STD-1916 or ASQ H1331, verifies bare item markings against MIL-STD-129, and validates packaging per MIL-STD-2073-1E. Validates traceability documentation for NAVAIR requirements. Delivers inspection reports and certification of compliance.

Similar Contracts

Same NAICS industry code

First Article Test (FAT) SpecialistThis subcontract, managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division, requires a First Article Test Specialist to perform validation on wiring harness components for prime contractors. The scope of work involves conducting First Article Testing on one unit, specifically NSN 0001S0000053, utilizing electrical signal integrity equipment to ensure design and manufacturing quality meet strict government standards. The selected provider is responsible for delivering a comprehensive FAT Report and one validated test unit for government approval. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by October 30, 2026, under NAICS code 541380.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

Third-Party Dimensional Inspection and CertificationThis subcontract for Third-Party Dimensional Inspection and Certification supports the DLA Weapons Support Aviation Supply Chain by providing independent quality assurance and dimensional verification for prime contractors. The scope of work focuses on verifying Class 3A and 3B threads in accordance with System 22 of FED-STD-H28/20, utilizing sampling plans based on MIL-STD-1916 or ASQ H1331. The selected provider must operate out of an ISO 9001 or SAE AS9003 certified facility and possess the necessary precision gauging tools to deliver detailed inspection reports and certifications of conformance. The project is categorized under NAICS code 541380 and will be performed in Cherry Point. Interested parties should note the response deadline of October 30, 2026, for this Department of Defense requirement.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

Production Lot Test (PLT) ServicesThis subcontract for Production Lot Test services is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div. The selected contractor will perform Production Lot Testing for prime contractors on DLA supply contracts to verify the dimensions and material properties of machine thread bushings. All testing must be executed using specialized metrology and testing equipment in strict accordance with government standards, culminating in the delivery of a certified Production Lot Test report. The performance of this contract will take place in New Cumberland, Pennsylvania. Key compliance requirements include maintaining CMMC Level 2 certification and coordinating directly with government inspectors for destination acceptance. Interested parties should note the response deadline of October 30, 2026, for this opportunity categorized under NAICS code 541380.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

First Article Testing and Quality ValidationThis subcontract for First Article Testing and Quality Validation supports the DLA Weapons Support Land Supply Chain by providing initial validation and quality testing for prime contractors. The selected provider is responsible for producing two units for government testing at Robins Air Force Base in Georgia and generating detailed inspection reports for 402 MXSG/MXRILL. The project requires the use of precision measurement and test equipment RT001 and strict adherence to FAR 52.209-4 compliance standards. The final deliverables include the two test units and formal Factory Acceptance Test approval documentation. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense. Interested parties must note the response deadline of November 2, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

Third-Party Aerospace Quality Inspection and CertificationThis subcontract for Third-Party Aerospace Quality Inspection and Certification supports prime contractors on DLA Weapons Support ASC projects in Tracy, California. The selected provider will perform independent verification and inspection of critical flight hardware, utilizing attribute and variable inspection per MIL-STD-1916 and sampling plans per MIL-STD-105/ASQ Z1.4 to ensure zero non-conformance. All measurements must be conducted using calibrated CMM and NIST-standard tools, with the final delivery consisting of detailed inspection reports and Certificates of Conformance. To qualify for this engagement, the contractor must maintain ISO 9001:2015 or SAE AS9003 certification. The opportunity is categorized under NAICS code 541380 and is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division. Interested parties must submit their responses by the deadline of October 30, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 6 hours ago

DEADLINE

Third-Party Quality Assurance and Material TestingThis subcontract for Third-Party Quality Assurance and Material Testing supports the Department of Defense DLA Weapons Support ASC Commodities Division. The selected provider will perform independent sampling and testing of manufactured collars for prime contractors, with work performed at Robins Air Force Base. The scope of work involves conducting inspections based on MIL-STD-1916 or ASQ H1331 standards to verify critical, major, and minor attributes according to AQL requirements. Technical execution requires the use of specialized equipment, including CMM, hardness testers, and destructive testing tools. To qualify, the contractor must hold ISO 9001 or AS9100 certification and is responsible for delivering comprehensive inspection reports and quality certification documents. The solicitation was posted on October 22, 2026, with a response deadline of October 30, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

Production Lot Test (PLT) ServicesThis subcontract for Production Lot Test services is issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division. The selected provider will perform Production Lot Testing for prime contractors on DLA supply contracts to validate the quality and functionality of manufactured cable assemblies. Specifically, the contractor must verify that assemblies meet the technical specifications of NSN 6150-01-091-6989 using signal analyzers, insulation resistance testers, or continuity testers. The contractor is required to be compliant with ITAR or EAR regulations and must deliver comprehensive test reports and certification of production lot requirements. Performance will take place in New Cumberland, Pennsylvania. The solicitation was posted on October 22, 2026, with a response deadline of October 30, 2026, falling under NAICS code 541380.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

First Article Testing (FAT) and CertificationThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, involves performing First Article Testing and Certification for prime contractors. The scope of work requires the testing of two units of NSN 6685014827329 to ensure manufacturing compliance in accordance with FAR 52.209-3 and Procurement Note H03. To verify pressure ranges and tolerances, the contractor must utilize certified calibration laboratory equipment and provide a formal First Article Test Report upon completion. The project is categorized under NAICS code 541380 and will be performed in Tracy, California. The solicitation was posted on October 22, 2026, with a response deadline of October 30, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 6 hours ago

DEADLINE

Third-Party Quality Assurance and Certification for Aerospace Fasteners

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

Production Lot Test (PLT) Laboratory ServicesThis subcontract for Production Lot Test Laboratory Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves conducting physical and material testing on rivet samples to validate quality conformance, utilizing specialized laboratory equipment to certify the strength, dimensions, and composition of the materials. The service provider is responsible for generating detailed test reports and material certifications, as well as providing technical drawings for validation by Tinker Air Force Base. Performance of these services will take place in New Cumberland, Pennsylvania, under NAICS code 541380, with the final deliverables consisting of the completed PLT reports and certifications.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

Quality Assurance Inspection and Certification ServicesThis subcontract for Quality Assurance Inspection and Certification Services supports prime contractors delivering aerospace components to the DLA Weapons Support ASC. The selected provider will perform independent inspections and certifications, utilizing sampling protocols such as MIL-STD-1916 or ASQ H1331 to ensure strict compliance with SAE AS81714/4 and SAE AS81714D standards. Additionally, the contractor is responsible for validating mercury-free status in accordance with NAVSEA 5100-003D and providing all necessary inspection reports and Certificates of Conformance. The performance of this contract will take place in San Diego, California. To be eligible, the contractor must hold ASQ certification and maintain CMMC Level 2 compliance. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

Third-Party Inspection and Sampling for FastenersThis subcontract involves providing independent sampling and quality inspection services for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The primary scope of work focuses on the inspection of fasteners, requiring the verification of bare item marking and zero-non-conformance in accordance with RQ017, utilizing MIL-STD-1916 or ASQ H1331 standards. Technical requirements include the use of precision measurement tools such as optical comparators, micrometers, and calipers to verify relieved body dimensions, with final deliverables consisting of certification of conformance and detailed inspection reports. The project is categorized under NAICS code 541380 and is to be performed in New Cumberland, Pennsylvania. Interested parties should note the response deadline of October 30, 2026, for this specific procurement opportunity.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

Same awarding agency

Supply of Piston Rings (NSN 4310017062926)This subcontract involves the supply of piston rings, specifically RIX INDUSTRIES part number 18-20420-8R1 under NSN 4310017062926, to support prime contractors fulfilling DLA supply contracts. The agreement requires the delivery of 16 units to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contractor must adhere to strict military standards for logistics, including packaging items according to MIL-STD-2073-1E and marking shipments per MIL-STD-129. Shipments are required to utilize specified D3 unit containers and E5 intermediate containers. This procurement is managed under the Department of Defense through the DLA Weapons Support Maritime Supply Chain.

Industrial Supplies Merchant Wholesalers

POSTED

about 6 hours ago

DEADLINE

ESD/EMI Protective Packaging and Marking ServicesThis subcontract involves providing specialized protective packaging and marking services for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The scope of work requires the application of Department of Defense qualified ESD and EMI protective packaging in strict accordance with MIL-PRF-81705, MIL-STD-2073-1E, and MIL-STD-129 standards, specifically including Special Marking Code 39. All shielding materials used must be compliant with MIL-PRF-81705 to ensure the integrity of the components. The project requires the final packaged and marked components to be delivered to DLA Dist San Joaquin, with the place of performance located in Tracy, California. This effort falls under NAICS code 339999 and is managed under the Department of Defense. Interested parties should note the response deadline of November 2, 2026.

All Other Miscellaneous Manufacturing

POSTED

about 6 hours ago

DEADLINE

Manufacturing of Electronic Component Assemblies (NSN 5998-01-285-9173)This subcontract involves the manufacture and supply of seven specialized electronic component assemblies for the DLA Weapons Support Maritime Supply Chain. The contractor is responsible for fabricating and assembling these components in strict accordance with technical specifications for NSN 5998-01-285-9173, utilizing military-grade electronics assembly equipment. Performance of the contract will take place in Tracy, California. To be eligible, the provider must meet rigorous security standards, including a CMMC Level 2 self-assessment and full DFARS cybersecurity compliance. The project falls under NAICS code 334418 and is managed under the Department of Defense. Interested parties must respond by November 2, 2026.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 6 hours ago

DEADLINE

Military Grade Packaging and Marking ServicesThis subcontract for Military Grade Packaging and Marking Services supports prime contractors delivering DLA supply contracts through the Department of Defense, specifically the DLA Weapons Support Maritime Supply Chain. The service provider is responsible for the specialized packaging, marking, and palletization of units to ensure they are fully prepared for FOB Origin shipment. All work must be performed in strict accordance with ASTM D3951 for packaging, MIL-STD-129 for marking and labeling, and RP001 for palletization, utilizing military-grade materials. The performance of this contract takes place in San Diego, California, under NAICS code 488410. Interested parties should note that the solicitation was posted on October 22, 2026, with a response deadline of November 2, 2026.

Motor Vehicle Towing

POSTED

about 6 hours ago

DEADLINE

Power Distribution Panel SupplierThis subcontract opportunity, issued by the DLA Weapons Support Maritime Supply Chain under the Department of Defense, requires the procurement of one Power Distribution Panel with NSN 6110-01-564-8757. The selected supplier is responsible for manufacturing or sourcing the panel in strict accordance with NSN specifications, ensuring full compliance with DFARS 252.225-7001. Quality assurance must be maintained per MIL-STD-1916 or ASQ H1331 standards, and the final product must be delivered to DLA Distribution San Diego. For those submitting alternate offers, the contractor must provide comprehensive manufacturing drawings and shock extension reports that meet MIL-S-901 requirements. The solicitation was posted on October 22, 2026, with a response deadline of November 2, 2026. This requirement falls under NAICS code 335313 and is intended for prime contractors supporting DLA supply contracts.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 6 hours ago

DEADLINE

Power Supply Unit (NSN 6120-01-696-4869)This subcontract involves the provision of one Powerstar Inc. power supply unit, part number PS6000-1DSP-R2, for the DLA Weapons Support Maritime Supply Chain. The contractor is responsible for ensuring the unit is packaged and marked according to MIL-STD-2073-1E and MIL-STD-129 standards. Additionally, the supplier must maintain compliance with DLA Master Lists RA001 and RP001, as well as the Buy American and Balance of Payments Program. The delivery of the single power supply unit is designated as FOB Origin, with the place of performance located in Tracy, California. This requirement falls under NAICS code 334419 and is managed by the Department of Defense. The response deadline for this opportunity is November 2, 2026.

Other Electronic Component Manufacturing

POSTED

about 6 hours ago

DEADLINE

MIL-SPEC Packaging and International Shipping ServicesThis subcontract for MIL-SPEC Packaging and International Shipping Services supports the Department of Defense through the DLA Weapons Support Maritime Supply Chain. The selected provider will perform specialized military packaging and international shipping for prime contractors, specifically focusing on hardware destined for Yokosuka, Japan. All work must adhere to RP001 packaging standards and MIL-STD-129 marking requirements, utilizing MIL-SPEC cushioning and dunnage that contains no Class I ozone-depleting chemicals. The contractor is responsible for delivering fully packaged, marked, and manifested shipments that are ready for immediate transport. This opportunity falls under NAICS code 488510 and was posted on October 22, 2026, with a response deadline of November 2, 2026.

Freight Transportation Arrangement

POSTED

about 6 hours ago

DEADLINE

Precision Manufacturing of Valve Seats (NSN 4820-01-679-2152)This subcontract involves the precision manufacturing of 50 valve seats, identified by NSN 4820-01-679-2152, for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The project requires the fabrication of components using precision CNC machining in strict accordance with Basic Drawing NR 16236 RE-016792152 to ensure all dimensional and material tolerances are met. The contractor must maintain full compliance with DFARS 252.204-7012 and provide comprehensive C03 Supply Chain Traceability Documentation. This effort falls under NAICS code 332999 and is managed through the Department of Defense.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 6 hours ago

DEADLINE

Supply of MIL-SPEC Electrical Wire (NSN 6145009289896)This subcontract involves the supply of 5,000 feet of electrical wire for prime contractors supporting DLA Weapons Support Maritime Supply Chain projects. The materials must be manufactured or sourced in strict accordance with NSN 6145009289896, ANSI/NEMA HP3-2012, and MIL-DTL-12000 standards. All items must be packaged and marked according to MIL-STD-2073-1E and MIL-STD-129 specifications, with final delivery designated as FOB Origin to DLA Distribution DSP New Cumberland. The contractor is required to maintain full compliance with the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity standards. This procurement falls under NAICS code 331420 and is managed by the Department of Defense. Interested parties must adhere to the established response deadline of November 2, 2026.

Copper Rolling, Drawing, Extruding, and Alloying

POSTED

about 6 hours ago

DEADLINE

Supply of Electronic Test Extender Cards (PN: 111EXT6122-012X)This subcontract involves the manufacture or procurement of five specialized electronic test extender cards, specifically part number 111EXT6122-012X, for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The project requires strict adherence to MIL-STD-2073-1E and MIL-STD-129 standards for packaging and marking, with performance taking place in Tracy, California. To be eligible, contractors must comply with the Buy American Act and complete a CMMC Level 2 self-assessment to ensure the secure handling of Covered Defense Information. The solicitation was posted on October 22, 2026, with a response deadline of November 2, 2026, under NAICS code 334419.

Other Electronic Component Manufacturing

POSTED

about 6 hours ago

DEADLINE

MIL-SPEC Packaging and Freight Services

Freight Transportation Arrangement

POSTED

about 6 hours ago

DEADLINE

Manufacturing of Power Transformers (P/N 80P433CT)

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 6 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS