Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Third-Party Inspection and Sampling for Fasteners

Active

Federal

Response Deadline10/30/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves providing independent sampling and quality inspection services for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The primary scope of work focuses on the inspection of fasteners, requiring the verification of bare item marking and zero-non-conformance in accordance with RQ017, utilizing MIL-STD-1916 or ASQ H1331 standards. Technical requirements include the use of precision measurement tools such as optical comparators, micrometers, and calipers to verify relieved body dimensions, with final deliverables consisting of certification of conformance and detailed inspection reports. The project is categorized under NAICS code 541380 and is to be performed in New Cumberland, Pennsylvania. Interested parties should note the response deadline of October 30, 2026, for this specific procurement opportunity.

General Info

Fastener sampling and quality inspection services for DoD in New Cumberland, Pennsylvania.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

541380 - Testing Laboratories and Services

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-27-T-6056.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SCREW, EXTERNALLY RELIE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 22

subcontract

Response DeadlineOct 30

Submission deadline

Response Deadline

10/30/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs independent sampling and quality inspection for prime contractors on DLA Weapons Support ASC projects. Conducts sampling and verification of zero-non-conformance and bare item marking per RQ017 using MIL-STD-1916 or ASQ H1331 standards. Utilizes calipers, micrometers, and optical comparators to verify relieved body dimensions. Delivers inspection reports and certification of conformance.

Similar Contracts

Same NAICS industry code

First Article Test (FAT) SpecialistThis subcontract, managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division, requires a First Article Test Specialist to perform validation on wiring harness components for prime contractors. The scope of work involves conducting First Article Testing on one unit, specifically NSN 0001S0000053, utilizing electrical signal integrity equipment to ensure design and manufacturing quality meet strict government standards. The selected provider is responsible for delivering a comprehensive FAT Report and one validated test unit for government approval. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by October 30, 2026, under NAICS code 541380.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

Third-Party Dimensional Inspection and CertificationThis subcontract for Third-Party Dimensional Inspection and Certification supports the DLA Weapons Support Aviation Supply Chain by providing independent quality assurance and dimensional verification for prime contractors. The scope of work focuses on verifying Class 3A and 3B threads in accordance with System 22 of FED-STD-H28/20, utilizing sampling plans based on MIL-STD-1916 or ASQ H1331. The selected provider must operate out of an ISO 9001 or SAE AS9003 certified facility and possess the necessary precision gauging tools to deliver detailed inspection reports and certifications of conformance. The project is categorized under NAICS code 541380 and will be performed in Cherry Point. Interested parties should note the response deadline of October 30, 2026, for this Department of Defense requirement.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

Production Lot Test (PLT) ServicesThis subcontract for Production Lot Test services is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div. The selected contractor will perform Production Lot Testing for prime contractors on DLA supply contracts to verify the dimensions and material properties of machine thread bushings. All testing must be executed using specialized metrology and testing equipment in strict accordance with government standards, culminating in the delivery of a certified Production Lot Test report. The performance of this contract will take place in New Cumberland, Pennsylvania. Key compliance requirements include maintaining CMMC Level 2 certification and coordinating directly with government inspectors for destination acceptance. Interested parties should note the response deadline of October 30, 2026, for this opportunity categorized under NAICS code 541380.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

First Article Testing and Quality ValidationThis subcontract for First Article Testing and Quality Validation supports the DLA Weapons Support Land Supply Chain by providing initial validation and quality testing for prime contractors. The selected provider is responsible for producing two units for government testing at Robins Air Force Base in Georgia and generating detailed inspection reports for 402 MXSG/MXRILL. The project requires the use of precision measurement and test equipment RT001 and strict adherence to FAR 52.209-4 compliance standards. The final deliverables include the two test units and formal Factory Acceptance Test approval documentation. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense. Interested parties must note the response deadline of November 2, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

Third-Party Aerospace Quality Inspection and CertificationThis subcontract for Third-Party Aerospace Quality Inspection and Certification supports prime contractors on DLA Weapons Support ASC projects in Tracy, California. The selected provider will perform independent verification and inspection of critical flight hardware, utilizing attribute and variable inspection per MIL-STD-1916 and sampling plans per MIL-STD-105/ASQ Z1.4 to ensure zero non-conformance. All measurements must be conducted using calibrated CMM and NIST-standard tools, with the final delivery consisting of detailed inspection reports and Certificates of Conformance. To qualify for this engagement, the contractor must maintain ISO 9001:2015 or SAE AS9003 certification. The opportunity is categorized under NAICS code 541380 and is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division. Interested parties must submit their responses by the deadline of October 30, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 5 hours ago

DEADLINE

Third-Party Quality Assurance and Material TestingThis subcontract for Third-Party Quality Assurance and Material Testing supports the Department of Defense DLA Weapons Support ASC Commodities Division. The selected provider will perform independent sampling and testing of manufactured collars for prime contractors, with work performed at Robins Air Force Base. The scope of work involves conducting inspections based on MIL-STD-1916 or ASQ H1331 standards to verify critical, major, and minor attributes according to AQL requirements. Technical execution requires the use of specialized equipment, including CMM, hardness testers, and destructive testing tools. To qualify, the contractor must hold ISO 9001 or AS9100 certification and is responsible for delivering comprehensive inspection reports and quality certification documents. The solicitation was posted on October 22, 2026, with a response deadline of October 30, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

Production Lot Test (PLT) ServicesThis subcontract for Production Lot Test services is issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division. The selected provider will perform Production Lot Testing for prime contractors on DLA supply contracts to validate the quality and functionality of manufactured cable assemblies. Specifically, the contractor must verify that assemblies meet the technical specifications of NSN 6150-01-091-6989 using signal analyzers, insulation resistance testers, or continuity testers. The contractor is required to be compliant with ITAR or EAR regulations and must deliver comprehensive test reports and certification of production lot requirements. Performance will take place in New Cumberland, Pennsylvania. The solicitation was posted on October 22, 2026, with a response deadline of October 30, 2026, falling under NAICS code 541380.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

Quality Assurance Sampling and Inspection ServicesThis subcontract for Quality Assurance Sampling and Inspection Services is issued by the Department of Defense under the DLA Weapons Support Maritime Supply Chain. The selected provider will perform independent sampling and quality inspections for prime contractors on Navy hardware procurements, ensuring strict adherence to MIL-STD-1916 or ASQ H1331 sampling standards. Key responsibilities include verifying bare item markings against MIL-STD-129, validating packaging according to MIL-STD-2073-1E, and ensuring all traceability documentation meets NAVAIR requirements. The contractor is required to deliver detailed inspection reports and certifications of compliance to validate the quality of the hardware. This opportunity falls under NAICS code 541380 and is designated for performance at FPO 96672. Interested parties must submit their responses by the deadline of November 6, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

First Article Testing (FAT) and CertificationThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, involves performing First Article Testing and Certification for prime contractors. The scope of work requires the testing of two units of NSN 6685014827329 to ensure manufacturing compliance in accordance with FAR 52.209-3 and Procurement Note H03. To verify pressure ranges and tolerances, the contractor must utilize certified calibration laboratory equipment and provide a formal First Article Test Report upon completion. The project is categorized under NAICS code 541380 and will be performed in Tracy, California. The solicitation was posted on October 22, 2026, with a response deadline of October 30, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 5 hours ago

DEADLINE

Production Lot Test (PLT) Laboratory ServicesThis subcontract for Production Lot Test Laboratory Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves conducting physical and material testing on rivet samples to validate quality conformance, utilizing specialized laboratory equipment to certify the strength, dimensions, and composition of the materials. The service provider is responsible for generating detailed test reports and material certifications, as well as providing technical drawings for validation by Tinker Air Force Base. Performance of these services will take place in New Cumberland, Pennsylvania, under NAICS code 541380, with the final deliverables consisting of the completed PLT reports and certifications.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

Quality Assurance Inspection and Certification ServicesThis subcontract for Quality Assurance Inspection and Certification Services supports prime contractors delivering aerospace components to the DLA Weapons Support ASC. The selected provider will perform independent inspections and certifications, utilizing sampling protocols such as MIL-STD-1916 or ASQ H1331 to ensure strict compliance with SAE AS81714/4 and SAE AS81714D standards. Additionally, the contractor is responsible for validating mercury-free status in accordance with NAVSEA 5100-003D and providing all necessary inspection reports and Certificates of Conformance. The performance of this contract will take place in San Diego, California. To be eligible, the contractor must hold ASQ certification and maintain CMMC Level 2 compliance. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

First Article Testing and Quality ValidationThis subcontract, titled First Article Testing and Quality Validation, is a total small business set-aside issued by the Department of Defense under the DLA Weapons Support Land Supplier Operations Vehicle Support agency. The project focuses on performing first article testing for prime contractors, specifically requiring validation testing on two units of NSN 3040-99-885-4699. The selected contractor is responsible for coordinating with Government Quality Assurance Representatives for in-process verification and delivering a formal First Article Test Report along with the validated units. The work is categorized under NAICS code 541380 and will be performed in Tracy, California. The solicitation was posted on October 22, 2026, with a response deadline of November 2, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 5 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

Precision Flat Washer Manufacturing/SupplyThis subcontract involves the fabrication and supply of 75 precision flat washers, identified by NSN 5310-01-483-5528, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The manufacturer must adhere strictly to provided technical data, specifically excluding the use of additive manufacturing. Quality control requires the implementation of zero-based sampling in accordance with MIL-STD-1916 or ASQ H1331, with packaging and labeling following RP001 and MIL-STD-2073-1E standards. The contractor is required to maintain JCP certification to handle ITAR and EAR regulated data and must provide necessary support for the source inspection of critical items. The final delivery of the 75 units is designated as FOB Origin, with the place of performance located in Tracy, California. This procurement falls under NAICS code 332722 and is managed by the Department of Defense.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 5 hours ago

DEADLINE

Military-Spec Packaging and Shipping ServicesThis subcontract for Military-Spec Packaging and Shipping Services involves providing specialized packaging for prime contractors supporting DLA Weapons Support ASC projects. The scope of work requires packaging items, specifically bolts, in accordance with RP001 and MIL-STD-129, with DLA Master List requirements taking precedence over ASTM D3951. The contractor must utilize MIL-SPEC materials and labeling equipment to ensure all items are properly prepared and documented. Logistical responsibilities include coordinating FOB Origin shipments to DLA Distribution San Joaquin, with the place of performance located in Tracy, California. The project falls under NAICS code 488510 and is managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division.

Freight Transportation Arrangement

POSTED

about 5 hours ago

DEADLINE

Close Tolerance Bolt FabricationThis subcontract for Close Tolerance Bolt Fabrication involves the production of 61 precision bolts for the DLA Weapons Support ASC Commodities Division. The manufacturer is required to use CNC equipment to meet NSN 5306013483463 specifications while strictly adhering to MIL-STD-1916 or ASQ H1331 sampling plans. Compliance with the Buy American Act and Berry Amendment is mandatory, and the use of additive manufacturing is expressly prohibited. The project is managed under NAICS code 332722 with performance taking place in Tracy, California. Interested parties must note the response deadline of October 30, 2026, for this Department of Defense requirement.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 5 hours ago

DEADLINE

Wiring Harness Supplier (NSN 6150-01-451-1108)This subcontract, issued by the Department of Defense through the DLA Weapons Support ASC Commodities Division, requires the procurement of 15 units of wiring harness NSN 6150-01-451-1108. The selected supplier is responsible for manufacturing or sourcing components that strictly adhere to DoD specifications and ensuring all packaging complies with MIL-STD-2073-1E. The contract falls under NAICS code 335999 and requires the provider to maintain an active SAM registration. Performance will take place in New Cumberland, Pennsylvania. Interested parties must submit their responses by October 30, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 5 hours ago

DEADLINE

Supply and Manufacture of Quick Release PinsThis subcontract involves the manufacture and supply of 100 precision-engineered quick release pins for the DLA Weapons Support ASC Commodities Division under the Department of Defense. The items must strictly adhere to NSN 5315014943040 specifications and are classified as Critical Application Items. Production requires the use of precision machining and marking equipment, with bare item marking performed according to RQ017. Quality assurance is a primary requirement, with sampling conducted per MIL-STD-1916 or ASQ H1331. The work is to be performed in New Cumberland, Pennsylvania, under NAICS code 332710. The solicitation was posted on October 22, 2026, with a response deadline of October 30, 2026.

POSTED

about 5 hours ago

DEADLINE

Manufacturer of Hexagon Head Cap Screws (NASM90725)This subcontract involves the manufacture of 900 high-precision hexagon head cap screws, identified by NSN 5305013258388 and part number MS90725-113, for the DLA Weapons Support ASC Commodities Division. The contractor must fabricate the screws according to NASM90725 Revision 04 and utilize precision machining equipment and a dedicated quality control lab. Quality assurance sampling must be performed in accordance with MIL-STD-1916 or ASQ H1331. The project requires strict adherence to the Buy American Act, MIL-STD-2073-1E, and MIL-STD-129. Performance will take place in Albany, Georgia. The solicitation was posted on October 22, 2026, with a response deadline of October 30, 2026, under NAICS code 332722.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 5 hours ago

DEADLINE

Supply of Retaining Rings (NSN 5325009340568)This subcontract involves the supply of 142 precision-manufactured retaining rings, identified by Part Number 206A247 and NSN 5325009340568, for the DLA Weapons Support ASC Commodities Division. The items are designated as Critical Application Items, requiring strict adherence to RA001 technical requirements and RP001 packaging standards. Performance will take place at Hill AFB, and the contractor must possess precision machining equipment and a valid SAM registration to qualify. The procurement falls under NAICS code 332510 and is managed by the Department of Defense. Interested parties must submit their responses by October 30, 2026. The successful provider is responsible for ensuring all delivered components meet rigorous quality and tolerance standards to support prime contractors on critical weapons support projects.

Hardware Manufacturing

POSTED

about 5 hours ago

DEADLINE

Supply of Electrical Cable Assemblies (NSN 6150-00-368-8640)This subcontract involves the manufacture or sourcing of 20 black specialized electrical power cable assemblies identified by NSN 6150003688640 for the DLA Weapons Support ASC Commodities Division. The contractor is responsible for ensuring all units meet strict packaging standards per RP001 DLA requirements and adhere to hazardous material labeling regulations under 29 CFR 1910.1200. Additionally, the provider must certify compliance regarding Covered Defense Telecommunications Equipment. The project falls under NAICS code 334418 and is performed in New Cumberland. The solicitation was posted on October 22, 2026, with a response deadline of October 30, 2026. This agreement supports prime contractors in fulfilling broader Department of Defense supply contracts.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 5 hours ago

DEADLINE

Military-Grade Packaging and Palletization ServicesThis subcontract for Military-Grade Packaging and Palletization Services involves providing specialized logistics support for prime contractors working with the DLA Weapons Support ASC Commodities Division. The scope of work requires the packaging, marking, and palletization of four eye bolts destined for DLA Distribution in Albany, Georgia. All tasks must be executed using military-specification materials and equipment to ensure strict adherence to ASTM D3951 for packaging, MIL-STD-129 for marking and labeling, and DLA requirement RP001 for palletization. The opportunity is categorized under NAICS code 488510 and is managed by the Department of Defense. Interested parties should note that the response deadline is October 30, 2026, with the performance of services taking place in Albany, Georgia.

Freight Transportation Arrangement

POSTED

about 5 hours ago

DEADLINE

Precision CNC Machining and Fabrication of Critical Eye BoltsThis subcontract involves the precision CNC machining and fabrication of four critical application eye bolts for the DLA Weapons Support ASC Commodities Division. The manufacturer must produce the parts in strict accordance with Basic Drawing NR 80064 2584025 Revision J and Reference Drawing NR OMLM6 2584542 Revision AA. Performance of the contract will take place in Albany. To qualify, the contractor must maintain SAE AS9003 or ISO 9001 quality systems and ensure full compliance with CMMC Level 2 and DFARS 252.204-7012 standards. Additionally, the provider must adhere to all ITAR and EAR regulations. The response deadline for this requirement is October 30, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 5 hours ago

DEADLINE

Aerospace Industrial Coating and PaintingThis subcontract for Aerospace Industrial Coating and Painting involves providing surface preparation and painting services for prime contractors supporting DLA Weapons Support ASC missile projects. The scope of work requires the application of primer according to SSPC-25 standards with a dry film thickness between 0.0008 and 0.0010 inch, followed by a final topcoat meeting specified TT standards to deliver finished mounting plates. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332431. Due to the nature of the defense work, the contractor must maintain CMMC Level 2 certification and ensure full compliance with ITAR and EAR regulations. The response deadline for this opportunity is October 30, 2026.

Metal Can Manufacturing

POSTED

about 5 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS