Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Quality Assurance Testing and Certification (QAP 13873)

Active

Federal

Response Deadline10/30/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Quality Assurance Testing and Certification involves performing quality validation and inspection for prime contractors supporting DLA Weapons Support ASC projects. The scope of work requires the execution of inspection and test plans in accordance with Reference QAP 13873 QAP-B02 Revision B, utilizing calibrated Measuring and Test Equipment to verify material integrity and dimensional tolerances for critical application bearings. The selected provider is responsible for delivering all necessary quality certification documents and certified inspection reports. The project is managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division and will be performed in New Cumberland. Interested parties should note the response deadline of October 30, 2026, for this opportunity categorized under NAICS code 541380.

General Info

QA testing and certification for DLA Weapons Support ASC bearings in New Cumberland.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

541380 - Testing Laboratories and Services

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-27-T-6093.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BEARING ASSEMBLY, ST

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 22

subcontract

Response DeadlineOct 30

Submission deadline

Response Deadline

10/30/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs quality validation and inspection for prime contractors on DLA Weapons Support ASC projects. Executes inspection and test plans per Reference QAP 13873 QAP-B02 Revision B using calibrated Measuring and Test Equipment (M&TE). Verifies dimensional tolerances and material integrity for critical application bearings. Delivers certified inspection reports and quality certification documents.

Similar Contracts

Same NAICS industry code

First Article Test (FAT) SpecialistThis subcontract, managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division, requires a First Article Test Specialist to perform validation on wiring harness components for prime contractors. The scope of work involves conducting First Article Testing on one unit, specifically NSN 0001S0000053, utilizing electrical signal integrity equipment to ensure design and manufacturing quality meet strict government standards. The selected provider is responsible for delivering a comprehensive FAT Report and one validated test unit for government approval. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by October 30, 2026, under NAICS code 541380.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

Third-Party Dimensional Inspection and CertificationThis subcontract for Third-Party Dimensional Inspection and Certification supports the DLA Weapons Support Aviation Supply Chain by providing independent quality assurance and dimensional verification for prime contractors. The scope of work focuses on verifying Class 3A and 3B threads in accordance with System 22 of FED-STD-H28/20, utilizing sampling plans based on MIL-STD-1916 or ASQ H1331. The selected provider must operate out of an ISO 9001 or SAE AS9003 certified facility and possess the necessary precision gauging tools to deliver detailed inspection reports and certifications of conformance. The project is categorized under NAICS code 541380 and will be performed in Cherry Point. Interested parties should note the response deadline of October 30, 2026, for this Department of Defense requirement.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

Production Lot Test (PLT) Services

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

First Article Testing and Quality Validation

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

Third-Party Aerospace Quality Inspection and CertificationThis subcontract for Third-Party Aerospace Quality Inspection and Certification supports prime contractors on DLA Weapons Support ASC projects in Tracy, California. The selected provider will perform independent verification and inspection of critical flight hardware, utilizing attribute and variable inspection per MIL-STD-1916 and sampling plans per MIL-STD-105/ASQ Z1.4 to ensure zero non-conformance. All measurements must be conducted using calibrated CMM and NIST-standard tools, with the final delivery consisting of detailed inspection reports and Certificates of Conformance. To qualify for this engagement, the contractor must maintain ISO 9001:2015 or SAE AS9003 certification. The opportunity is categorized under NAICS code 541380 and is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division. Interested parties must submit their responses by the deadline of October 30, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

Third-Party Quality Assurance and Material Testing

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

Production Lot Test (PLT) Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

First Article Testing (FAT) and CertificationThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, involves performing First Article Testing and Certification for prime contractors. The scope of work requires the testing of two units of NSN 6685014827329 to ensure manufacturing compliance in accordance with FAR 52.209-3 and Procurement Note H03. To verify pressure ranges and tolerances, the contractor must utilize certified calibration laboratory equipment and provide a formal First Article Test Report upon completion. The project is categorized under NAICS code 541380 and will be performed in Tracy, California. The solicitation was posted on October 22, 2026, with a response deadline of October 30, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

Production Lot Test (PLT) Laboratory ServicesThis subcontract for Production Lot Test Laboratory Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves conducting physical and material testing on rivet samples to validate quality conformance, utilizing specialized laboratory equipment to certify the strength, dimensions, and composition of the materials. The service provider is responsible for generating detailed test reports and material certifications, as well as providing technical drawings for validation by Tinker Air Force Base. Performance of these services will take place in New Cumberland, Pennsylvania, under NAICS code 541380, with the final deliverables consisting of the completed PLT reports and certifications.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

Quality Assurance Inspection and Certification ServicesThis subcontract for Quality Assurance Inspection and Certification Services supports prime contractors delivering aerospace components to the DLA Weapons Support ASC. The selected provider will perform independent inspections and certifications, utilizing sampling protocols such as MIL-STD-1916 or ASQ H1331 to ensure strict compliance with SAE AS81714/4 and SAE AS81714D standards. Additionally, the contractor is responsible for validating mercury-free status in accordance with NAVSEA 5100-003D and providing all necessary inspection reports and Certificates of Conformance. The performance of this contract will take place in San Diego, California. To be eligible, the contractor must hold ASQ certification and maintain CMMC Level 2 compliance. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

Third-Party Inspection and Sampling for FastenersThis subcontract involves providing independent sampling and quality inspection services for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The primary scope of work focuses on the inspection of fasteners, requiring the verification of bare item marking and zero-non-conformance in accordance with RQ017, utilizing MIL-STD-1916 or ASQ H1331 standards. Technical requirements include the use of precision measurement tools such as optical comparators, micrometers, and calipers to verify relieved body dimensions, with final deliverables consisting of certification of conformance and detailed inspection reports. The project is categorized under NAICS code 541380 and is to be performed in New Cumberland, Pennsylvania. Interested parties should note the response deadline of October 30, 2026, for this specific procurement opportunity.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

First Article Test (FAT) Services

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 4 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

Precision Flat Washer Manufacturing/SupplyThis subcontract involves the fabrication and supply of 75 precision flat washers, identified by NSN 5310-01-483-5528, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The manufacturer must adhere strictly to provided technical data, specifically excluding the use of additive manufacturing. Quality control requires the implementation of zero-based sampling in accordance with MIL-STD-1916 or ASQ H1331, with packaging and labeling following RP001 and MIL-STD-2073-1E standards. The contractor is required to maintain JCP certification to handle ITAR and EAR regulated data and must provide necessary support for the source inspection of critical items. The final delivery of the 75 units is designated as FOB Origin, with the place of performance located in Tracy, California. This procurement falls under NAICS code 332722 and is managed by the Department of Defense.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

Military-Spec Packaging and Shipping ServicesThis subcontract for Military-Spec Packaging and Shipping Services involves providing specialized packaging for prime contractors supporting DLA Weapons Support ASC projects. The scope of work requires packaging items, specifically bolts, in accordance with RP001 and MIL-STD-129, with DLA Master List requirements taking precedence over ASTM D3951. The contractor must utilize MIL-SPEC materials and labeling equipment to ensure all items are properly prepared and documented. Logistical responsibilities include coordinating FOB Origin shipments to DLA Distribution San Joaquin, with the place of performance located in Tracy, California. The project falls under NAICS code 488510 and is managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division.

Freight Transportation Arrangement

POSTED

about 4 hours ago

DEADLINE

Close Tolerance Bolt FabricationThis subcontract for Close Tolerance Bolt Fabrication involves the production of 61 precision bolts for the DLA Weapons Support ASC Commodities Division. The manufacturer is required to use CNC equipment to meet NSN 5306013483463 specifications while strictly adhering to MIL-STD-1916 or ASQ H1331 sampling plans. Compliance with the Buy American Act and Berry Amendment is mandatory, and the use of additive manufacturing is expressly prohibited. The project is managed under NAICS code 332722 with performance taking place in Tracy, California. Interested parties must note the response deadline of October 30, 2026, for this Department of Defense requirement.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

Wiring Harness Supplier (NSN 6150-01-451-1108)This subcontract, issued by the Department of Defense through the DLA Weapons Support ASC Commodities Division, requires the procurement of 15 units of wiring harness NSN 6150-01-451-1108. The selected supplier is responsible for manufacturing or sourcing components that strictly adhere to DoD specifications and ensuring all packaging complies with MIL-STD-2073-1E. The contract falls under NAICS code 335999 and requires the provider to maintain an active SAM registration. Performance will take place in New Cumberland, Pennsylvania. Interested parties must submit their responses by October 30, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

Supply and Manufacture of Quick Release Pins

POSTED

about 4 hours ago

DEADLINE

Manufacturer of Hexagon Head Cap Screws (NASM90725)This subcontract involves the manufacture of 900 high-precision hexagon head cap screws, identified by NSN 5305013258388 and part number MS90725-113, for the DLA Weapons Support ASC Commodities Division. The contractor must fabricate the screws according to NASM90725 Revision 04 and utilize precision machining equipment and a dedicated quality control lab. Quality assurance sampling must be performed in accordance with MIL-STD-1916 or ASQ H1331. The project requires strict adherence to the Buy American Act, MIL-STD-2073-1E, and MIL-STD-129. Performance will take place in Albany, Georgia. The solicitation was posted on October 22, 2026, with a response deadline of October 30, 2026, under NAICS code 332722.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

Supply of Electrical Cable Assemblies (NSN 6150-00-368-8640)This subcontract involves the manufacture or sourcing of 20 black specialized electrical power cable assemblies identified by NSN 6150003688640 for the DLA Weapons Support ASC Commodities Division. The contractor is responsible for ensuring all units meet strict packaging standards per RP001 DLA requirements and adhere to hazardous material labeling regulations under 29 CFR 1910.1200. Additionally, the provider must certify compliance regarding Covered Defense Telecommunications Equipment. The project falls under NAICS code 334418 and is performed in New Cumberland. The solicitation was posted on October 22, 2026, with a response deadline of October 30, 2026. This agreement supports prime contractors in fulfilling broader Department of Defense supply contracts.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 4 hours ago

DEADLINE

Military-Grade Packaging and Palletization ServicesThis subcontract for Military-Grade Packaging and Palletization Services involves providing specialized logistics support for prime contractors working with the DLA Weapons Support ASC Commodities Division. The scope of work requires the packaging, marking, and palletization of four eye bolts destined for DLA Distribution in Albany, Georgia. All tasks must be executed using military-specification materials and equipment to ensure strict adherence to ASTM D3951 for packaging, MIL-STD-129 for marking and labeling, and DLA requirement RP001 for palletization. The opportunity is categorized under NAICS code 488510 and is managed by the Department of Defense. Interested parties should note that the response deadline is October 30, 2026, with the performance of services taking place in Albany, Georgia.

Freight Transportation Arrangement

POSTED

about 4 hours ago

DEADLINE

Precision CNC Machining and Fabrication of Critical Eye BoltsThis subcontract involves the precision CNC machining and fabrication of four critical application eye bolts for the DLA Weapons Support ASC Commodities Division. The manufacturer must produce the parts in strict accordance with Basic Drawing NR 80064 2584025 Revision J and Reference Drawing NR OMLM6 2584542 Revision AA. Performance of the contract will take place in Albany. To qualify, the contractor must maintain SAE AS9003 or ISO 9001 quality systems and ensure full compliance with CMMC Level 2 and DFARS 252.204-7012 standards. Additionally, the provider must adhere to all ITAR and EAR regulations. The response deadline for this requirement is October 30, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

Aerospace Industrial Coating and PaintingThis subcontract for Aerospace Industrial Coating and Painting involves providing surface preparation and painting services for prime contractors supporting DLA Weapons Support ASC missile projects. The scope of work requires the application of primer according to SSPC-25 standards with a dry film thickness between 0.0008 and 0.0010 inch, followed by a final topcoat meeting specified TT standards to deliver finished mounting plates. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332431. Due to the nature of the defense work, the contractor must maintain CMMC Level 2 certification and ensure full compliance with ITAR and EAR regulations. The response deadline for this opportunity is October 30, 2026.

Metal Can Manufacturing

POSTED

about 4 hours ago

DEADLINE

Aerospace Plating and Anodizing ServicesThis subcontract for Aerospace Plating and Anodizing Services supports prime contractors on DLA Weapons Support ASC missile projects. The scope of work involves providing surface treatments for mounting plates, specifically requiring electrodeposited cadmium plating according to SAE AMS-QQ-P-416 Type II/Class 3 and anodic coatings per MIL-A-8625, with cleaning performed under TT-C-490 Method I or VI. The project is managed under the Department of Defense and requires strict adherence to CMMC Level 2 and ITAR/EAR compliance standards. Performance will take place in New Cumberland, Pennsylvania, with a response deadline set for October 30, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 4 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS