Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Quality Inspection and Acceptance Support

Active

Federal

Response Deadline08/10/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires performance of origin-based quality inspections in accordance with ASQ Z1.4 and AQL standards, specifying critical defect limits at 0.1, major defects at 1.0, and minor defects at 4.0. All inspections must be thoroughly documented and supported to facilitate government acceptance, ensuring compliance with stringent quality benchmarks. The work is scoped as a subcontract under the Department of Defense’s ASC Commodities Division, with performance to occur at a designated location in Tracy, California, with a postal code of 95304-5000. The solicitation was posted on August 2, 2026, with responses due by August 10, 2026, and it is classified under NAICS code 811211, indicating a focus on repair and maintenance services. Participation is open without specific set-aside restrictions, and all activities must align with federal acceptance protocols for delivered commodities.

General Info

Origin-based quality inspections per ASQ Z1.4 at Tracy, CA, for DoD with AQL limits and federal compliance required.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

811211 - Consumer Electronics Repair and MaintenanceView NAICS

Place of Performance

TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 2

subcontract

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Perform origin-based quality inspections per ASQ Z1.4 and AQL standards (Critical: 0.1, Major: 1.0, Minor: 4.0), with documentation and support for government acceptance.

Similar Contracts

Same NAICS industry code

Unique Item Identification (UID) and Data Matrix Marking ServicesThe contract requires the application of Unique Item Identification (UID) markings in compliance with MIL-STD-130 specifications, utilizing Data Matrix symbols formatted according to ISO/IEC 15434 standards to ensure accurate and permanent identification of military parts. Each item must be serialized to enable end-to-end traceability throughout the defense supply chain, with rigorous verification processes in place to confirm the readability, accuracy, and durability of the markings under operational conditions. The work is performed under a subcontract arrangement for the Department of Defense, specifically managed by the ASC SUPPLIER OPER OEM DIVISION, and must adhere strictly to federal guidelines for item identification and data structure. The solicitation was posted on August 3, 2026, with responses due by September 3, 2026, and falls under the NAICS code 811211, indicating a focus on electronic and precision equipment repair and maintenance services supporting military hardware.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 10 hours ago

DEADLINE

in about 1 month

Medical Item Labeling and Marking ServicesThe contract seeks compliant labeling and marking services for medical devices in accordance with Medical Marking Standard No. 1, requiring precise application of barcoding, lot tracking, and hazard labeling to ensure full regulatory alignment. All work must be performed at the designated place of performance in APO, ZIP 96543-4010, and the effort is classified as a subcontract under NAICS code 811211, indicating a focus on industrial and commercial cleaning and janitorial services that support specialized medical logistics. The solicitation was posted on August 2, 2026, with responses due by August 10, 2026, and is issued under the Department of Defense’s Medical Supply Chain FSH organization to ensure standardized, traceable, and safe medical item identification throughout the defense supply chain.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Quality Assurance and Inspection SupportThe contract requires the provision of quality assurance and inspection support to verify component conformance prior to government inspection, utilizing either MIL-STD-1916 or ASQ H1331 standards for sampling and documentation. The work must ensure rigorous adherence to military and industry quality protocols to confirm that all components meet specified requirements before they are accepted by government authorities. The performance location is designated as Hill Air Force Base with a zip code of 84056-5734, and the contract falls under the NAICS code 811211, indicating it is related to industrial and commercial machinery and equipment repair and maintenance services. This is a subcontract opportunity issued by the Fluid Handling Division under the Department of Defense, with a response deadline of August 13, 2026, and a posting date of August 2, 2026. All submissions must align with the outlined quality verification procedures and be coordinated through the official DIBBS platform linked in the solicitation.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Military-Grade Labeling and Marking ServicesThe contract requires the application of MIL-STD-129 compliant labels, barcodes, and markings to pressure tanks and associated shipping units, ensuring strict adherence to Department of Defense standards for identification and tracking. All work must meet the technical specifications outlined in MIL-STD-129, covering barcode formatting, label placement, material durability, and traceability requirements to support military logistics and inventory systems. The effort is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to respond, reinforcing the goal of promoting small business participation in defense contracting. The solicitation was posted on August 2, 2026, with a response deadline of August 17, 2026, and is managed by the Department of Defense under the agency name LAND SUPPLIER OPNS VEHICLE SPT. The North American Industry Classification System code 811211 indicates the work falls under repair and maintenance services, suggesting the contractor may be responsible for both initial labeling and potential rework or replacement of existing markings. Performance locations are unspecified, but the work will likely occur across multiple military supply or storage facilities. The contract is accessible via the DIBBS platform, and all bidders must ensure full compliance with federal acquisition regulations and the detailed technical requirements of MIL-STD-129 to qualify for award.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Calibration and Quality Inspection ServicesThe contract requires the calibration of test equipment and the execution of quality inspections to verify bearing supplies in compliance with SAE AS9003 and MIL-STD-2073-1E standards. These services are essential for ensuring the accuracy, reliability, and uniformity of aerospace and defense components, with all work tied directly to the supply verification process for critical bearing parts. The contract is structured as a subcontract under the ASC Commodities Division of the Department of Defense, with performance required at the designated location in Jacksonville, Florida, zip code 32212-0103. The NAICS code 811211 identifies the primary industry classification as commercial and industrial machinery and equipment repair and maintenance. The solicitation was posted on August 2, 2026, with a response deadline of August 10, 2026, and is accessible through the DIBBS portal for qualified subcontractors to submit proposals within the specified timeframe.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Medical-Grade Packaging and Sterilization ServicesThe contract seeks qualified vendors to provide sterilization and cleanroom packaging services for medical-grade abdominal pads, ensuring all products meet stringent sterile standards. Services include unit sealing, bulk packaging, and full compliance with MIL-STD-129 labeling requirements and ASTM D3951 packaging standards to guarantee product integrity and traceability throughout the supply chain. The work must be performed in a certified cleanroom environment to prevent contamination and ensure the sterility of surgical supplies destined for military medical use. The contract is classified as a subcontract under NAICS code 811211 and is tied to the Department of Defense’s Medical Supply Chain division, with performance required at Beale Air Force Base, California, zip 95903-1908. Responses must be submitted by August 10, 2026, and the opportunity was posted on August 2, 2026. All packaged units must adhere to federal military labeling and packaging specifications, with particular emphasis on durability, clarity of markings, and readiness for distribution within military healthcare systems.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Quality Inspection and Sampling ServicesThe contract requires the performance of initial inspection and sampling of finished fittings in accordance with MIL-STD-1916 and ASQ H1331 Table 1 to verify compliance with acceptable quality level standards. All inspections must be thoroughly documented to demonstrate conformance with established AQL requirements, ensuring that product quality meets military and industry specifications. The work is classified as a subcontract under NAICS code 811211 and is being managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. The solicitation was posted on August 2, 2026, with responses due by August 10, 2026, and no specific set-aside or geographic placement details are provided. The full solicitation can be accessed through the DIBBS system using the reference number SPE4A726T605G.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Bar-Coding and MIL-STD-129 Marking ServicesThe contract requires the application of standardized barcodes and markings to kits and components in full compliance with MIL-STD-129, ensuring all items are properly labeled with machine-readable codes and special marking requirements as dictated by military standards. This includes precise labeling methodologies to support traceability, inventory management, and logistics operations across the Department of Defense supply chain. The work must be performed at the designated place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the task falls under the NAICS code 811211, indicating it relates to repair and maintenance services for non-electronic equipment. This subcontract opportunity is open for responses until August 13, 2026, with the solicitation posted on August 2, 2026. The contracting entity is the Maritime Supply Chain division of the Department of Defense, and all work must align with federal defense logistics protocols. Bidders are expected to demonstrate capability in executing military-grade marking systems accurately and consistently, with an emphasis on durability, readability, and compliance with current MIL-STD-129 specifications. The procurement is administered through the DIBBS system, and interested parties must submit proposals via the provided link before the deadline to be considered.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Technical Support and Warranty ServicesThe contract is for the provision of post-delivery technical support, troubleshooting, and warranty services specifically for a refrigerator-freezer unit, ensuring continued operational reliability after installation. It is classified as a subcontract under the NAICS code 811211, which corresponds to appliance repair and maintenance services, and is managed by the Department of Defense through its SUBSISTENCE FSE SUPPLY CHAIN. The place of performance is Jacksonville, Florida, with a zip code of 32212, indicating that support activities must be rendered within this geographic area. The solicitation was posted on August 2, 2026, and responses are due by August 6, 2026, requiring timely submission of capabilities, resources, and service plans to meet the technical and warranty obligations outlined. This contract does not specify a set-aside type or point of contact, leaving all details to be communicated through the official DIBBS portal linked in the posting.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

DEADLINE

Military-Standard Labeling and Barcoding ServicesThe contract requires the application of MIL-STD-129 compliant labeling and machine-readable barcodes for all shipment and storage operations, ensuring standardization and traceability across military logistics systems. This includes the proper identification and marking of hazardous materials when present, in full compliance with federal regulations governing the handling and transport of dangerous goods. All labeling must be durable, legible, and precisely formatted to meet Department of Defense requirements for inventory control and field operations. The work is tied to the DDSP NEW CUMBERLAND FACILITY under the Department of Defense and is classified as a subcontract with a NAICS code of 811211. The place of performance is in NEW CUMBERLAND, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on August 2, 2026, and responses are due by August 13, 2026. Contractors must be prepared to execute precise labeling procedures under rigorous quality standards, with no allowance for deviation from the military specifications, and must have the capacity to handle sensitive or hazardous material markings as required by the nature of the shipments.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Emergency Calibration and On-Demand Response ServicesThe contract demands the provision of 24/7 emergency calibration services to respond rapidly to unplanned equipment failures within a GMP-compliant environment, ensuring uninterrupted operations and regulatory adherence. Contractors must be prepared to deploy qualified personnel at any time to recalibrate critical measurement instruments, minimizing downtime and maintaining product quality and process integrity. Service levels require immediate response capabilities, with strict protocols for documentation, traceability, and compliance with GMP standards throughout all calibration activities. The opportunity is structured as a subcontract under the National Research Council of Canada, part of the Government of Canada, with performance obligations located across Canada. The solicitation was posted on August 1, 2026, and responses are due by August 25, 2026, under NAICS code 811211 for industrial and commercial equipment repair and maintenance. Bidders must demonstrate proven experience in regulated environments, capable of meeting stringent response time expectations and maintaining rigorous calibration records acceptable to health and safety authorities. Successful vendors will be expected to integrate seamlessly with existing facility operations and uphold the high standards required for pharmaceutical, biotech, or similar GMP-regulated manufacturing settings.

National Research Council of Canada

POSTED

DEADLINE

Scheduled Calibration Services for Laboratory and Manufacturing InstrumentsThe contract requires the performance of routine, on-site calibration services for 365 scientific and industrial instruments during scheduled shutdown periods to ensure continued compliance with Good Manufacturing Practices and equipment validation standards. All calibration work must be conducted in Canada, with services aligned to operational downtime to minimize disruption to critical laboratory and manufacturing processes. The scope emphasizes precision, regulatory adherence, and timely execution to support ongoing quality assurance protocols in a regulated environment. The solicitation is classified as a subcontract under NAICS code 811211 and is managed by the National Research Council of Canada, operating under the Government of Canada. The opportunity was posted on August 1, 2026, with a response deadline of August 25, 2026. Proposals must demonstrate technical capability, experience with GMP-regulated environments, and the ability to coordinate calibration activities within tight operational windows. No set-aside provisions are specified, and all interested parties are expected to meet the stringent calibration and documentation requirements necessary for federal compliance.

National Research Council of Canada

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Traceability Documentation and DART Database SubmissionThe contract requires the maintenance and submission of complete traceability records for airworthiness parts through the DLA Automated Records Traceability DART database, ensuring full accountability from manufacturing through to final use. This includes the accurate uploading of manufacturer information, lot-level traceability data, and all relevant test results to meet stringent defense aviation standards. The obligation extends to timely and error-free documentation to support regulatory compliance and operational readiness across the Department of Defense supply chain. This subcontract is issued under NAICS code 541611 and is active with a response deadline of August 17 2026 and a posted date of August 3 2026. It is managed by the ASC Commodities Division under the Department of Defense and requires strict adherence to DART protocols without reliance on external or paperbased systems. There is no designated set aside classification and no specific performance location listed indicating the work may be performed remotely or at any qualifying facility meeting federal traceability requirements. Failure to comply with data submission timelines or accuracy standards will result in contract noncompliance.

Administrative Management and General Management Consulting Services

POSTED

about 10 hours ago

DEADLINE

Cybersecurity and CUI Compliance (CMMC Level 2)The contract requires implementation and self-assessment for CMMC Level 2 compliance to safeguard Controlled Unclassified Information related to design, manufacturing, and testing data. It applies specifically to systems that handle technical data and traceability records, ensuring that appropriate security controls are in place to protect sensitive information from unauthorized access, disclosure, or compromise. The contractor must align with the CMMC framework’s requirements to achieve and maintain compliance, which includes documenting policies, conducting internal assessments, and demonstrating readiness for potential audits. This is a subcontract under the Department of Defense, managed by the ASC Commodities Division, with a NAICS code of 541512 indicating information technology services. The solicitation was posted on August 3, 2026, and responses are due by August 17, 2026. The performance location is not specified, and there is no set-aside designation. The contract is accessible via a public DIBBS portal, and while a point of contact is not provided, responsible parties are expected to adhere to all CMMC Level 2 controls and maintain ongoing compliance throughout the contract lifecycle.

Computer Systems Design Services

POSTED

about 10 hours ago

DEADLINE

MIL-STD-2073-1E and MIL-STD-129 Packaging and MarkingAll units must be packaged and marked in full compliance with MIL-STD-2073-1E and MIL-STD-129, encompassing detailed preservation methods designated as PRES MTHD: 10, and requiring accurate lot and serial number labeling, CAGE code marking, and barcoding for traceability and inventory management. Palletization must adhere to DLA RP001 specifications to ensure uniformity, stability, and readiness for handling and transport within the Department of Defense logistics network. This subcontract is issued under NAICS code 493190 by the ASC Commodities Division of the Department of Defense, with responses due by August 17, 2026, and performance expected to support military supply chain requirements regardless of specific geographic location.

Other Warehousing and Storage

POSTED

about 10 hours ago

DEADLINE

First Article Testing (FAT) and Government Test Unit ProductionThe contract requires the production and submission of government test units under CLIN 0002 and CLIN 0003 for First Article Testing, with full documentation including a comprehensive FAT report, inspection at the manufacturing origin, and delivery within specified timeframes of 210 and 296 days ADO respectively. The effort is part of a subcontract under the Department of Defense’s ASC Commodities Division, with a NAICS code of 332722 indicating precision instrument manufacturing, and is focused on delivering qualified test units that meet rigorous government technical and procedural standards. The timeline is tightly defined, and the requirement for complete documentation and on-site inspection ensures traceability and compliance before acceptance. The solicitation, posted on August 3, 2026, has a response deadline of August 17, 2026, and is accessible via the DIBBS platform. Although no set-aside type or specific point of contact is provided, the place of performance and organization details indicate this is a federal defense procurement with expectations for full adherence to military quality assurance protocols. Participation requires the ability to manage complex production timelines, document every stage of manufacturing and testing, and coordinate with government inspection teams to validate conformance prior to final delivery.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 10 hours ago

DEADLINE

Precision Machining of Critical Safety BoltsThe contract mandates the manufacture of 271 precision machine bolts designated by NSN 5306-01-564-3371, engineered to meet strict technical standards, with specific attention to correcting a weight discrepancy found on part number 70400-38159 for MP-35N material. The scope of work encompasses the full production cycle including sourcing of approved materials, precision machining, heat treatment processes, and comprehensive quality verification to ensure compliance with safety and performance requirements. All components must be produced under rigorous quality control protocols to maintain dimensional accuracy and material integrity critical to their function. This subcontract, issued under NAICS code 332722 by the ASC Commodities Division of the Department of Defense, is posted for bid with a response deadline of August 17, 2026. The work is tied to a defense-related production need, emphasizing reliability and adherence to military specifications. While details on delivery location and point of contact are not provided, the place of performance and contracting entity indicate that the finished bolts are intended for use in mission-critical defense systems, requiring full traceability and certification throughout the manufacturing process.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 10 hours ago

DEADLINE

Commercial Item Subcontract ManagementThe contract titled Commercial Item Subcontract Management requires the successful offeror to oversee and manage subcontracts for commercial products in full compliance with Federal Acquisition Regulation 52.244-6 and Defense Federal Acquisition Regulation Supplement 252.244-7000. This includes the accurate and complete flow-down of all applicable clauses to subcontractors and ensuring that small business participation is properly integrated throughout the supply chain in alignment with the stated set-aside requirements. All subcontracting activities must adhere to the standards established for commercial item acquisition while maintaining rigorous documentation and oversight to demonstrate compliance. This solicitation is designated as a Total Small Business Set-Aside under FAR 19.5, meaning only small businesses are eligible to compete, and the North American Industry Classification System code 541611 applies, indicating the work involves management, scientific, and technical consulting services. The contracting activity is under the ASC Commodities Division of the Department of Defense, and responses must be submitted by August 13, 2026. The contract is intended to support commercial item procurement efforts with a strong emphasis on fostering small business involvement across all levels of subcontracting.

Administrative Management and General Management Consulting Services

POSTED

about 10 hours ago

DEADLINE

Cybersecurity and Covered Defense Information SafeguardingThis contract requires the implementation and maintenance of cybersecurity controls aligned with NIST SP 800-171 to protect covered defense information as mandated by DFARS 252.204-7012, ensuring compliance with federal security standards for sensitive defense data. The work is classified as a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, and is governed by the NAICS code 541511, which pertains to custom computer programming services. The contract is administered by the ASC Commodities Division within the Department of Defense and places no specified location for performance, indicating flexibility in execution as long as compliance obligations are met. Respondents must submit proposals by the deadline of August 13, 2026, with the solicitation posted on August 3, 2026, through the DIBBS platform. Although no point of contact or physical performance location is provided, the expectation is for contractors to establish and sustain a verifiable, auditable cybersecurity posture throughout the contract period. The emphasis is on continuous compliance with NIST controls to safeguard covered defense information, and failure to maintain these standards could result in contract termination or penalization under applicable defense acquisition regulations.

Custom Computer Programming Services

POSTED

about 10 hours ago

DEADLINE

Electronic Invoicing and WAWF Compliance SupportThis contract requires the preparation and submission of electronic invoices through the Wide Area Workflow system with full compliance to Federal Acquisition Regulation clauses and seamless integration support to ensure accurate and timely processing. The work must be performed under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to bid, and the North American Industry Classification System code 541512 indicates the scope centers on computer systems design services, specifically within the realm of invoicing and financial data systems. The opportunity was posted on August 3, 2026, with submissions due by August 13, 2026, and is issued under the ASC Commodities Division of the Department of Defense, where performance is expected to align with federal electronic invoicing standards and system requirements, regardless of a specified physical location. All bidders must demonstrate proven capability in WAWF integration, proper FAR clause representation, and the technical infrastructure to handle secure, compliant electronic invoicing for government contracts.

Computer Systems Design Services

POSTED

about 10 hours ago

DEADLINE

Military-Grade Inspection and Acceptance ServicesThe contract requires comprehensive origin-based inspection and acceptance testing for critical components, strictly adhering to MIL-STD-1916 or ASQ Z1.4 standards with an AQL of 0.1 for critical defects, ensuring the highest level of quality control. Full traceable reporting must be maintained throughout the process, documenting every inspection step and result with complete accountability and data integrity. This work is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to respond, reinforcing the government’s commitment to supporting small business participation in defense contracting. The procurement falls under NAICS code 541380, indicating technical and scientific consulting services, and is managed by the ASC Commodities Division of the Department of Defense. The solicitation was posted on August 3, 2026, with a firm response deadline of August 13, 2026, leaving a ten-day window for qualified small businesses to submit proposals. Although the place of performance and point of contact details are unspecified, the contract is accessible via the DIBBS portal, and performance expectations center on precision testing and documentation to meet military-grade quality requirements without deviation.

Testing Laboratories and Services

POSTED

about 10 hours ago

DEADLINE

Defense Logistics Agency (DLA) Compliance Packaging and Preservation ProviderThe contract requires a small business to provide full packaging, preservation, and labeling services that meet military standards, specifically MIL-STD compliance, with an emphasis on mercury-free methods for environmental and safety compliance. All work must adhere to Defense Logistics Agency requirements, including the application of barcoding and precise container marking to ensure traceability and logistical efficiency across the supply chain. Services must be performed under a Total Small Business Set-Aside, restricting eligibility exclusively to small businesses certified by the SBA, and is classified under NAICS code 322291, which pertains to other paper product manufacturing. The solicitation is issued by the ASC Commodities Division within the Department of Defense and is open for response until August 13, 2026, with a posting date of August 3, 2026. Performance location details are unspecified, but all work must satisfy federal defense logistics standards without exception.

Sanitary Paper Product Manufacturing

POSTED

about 10 hours ago

DEADLINE

Qualified Product/Manufacturer Sourcing AgentThe contract seeks a qualified small business to source defense-compliant electronic components in accordance with MIL-DTL-24779D specifications and H02 clause requirements, ensuring all products originate exclusively from manufacturers or suppliers listed on the Qualified Products List or Qualified Manufacturers List. The role involves identifying, vetting, and procuring components that meet stringent military standards, with the expectation that all sourcing activities adhere to the technical and compliance frameworks established by the Department of Defense. The effort is classified as a total small business set-aside under FAR 19.5, restricting eligibility exclusively to small businesses as defined by the SBA, with the NAICS code 334511 indicating the industry focus on electronic component manufacturing. The solicitation, issued by the ASC Commodities Division under the Department of Defense, requires full responsiveness to the referenced specifications and compliance with all associated military standards. Responses are due by August 13, 2026, and the contract will be executed as a subcontract. While no point of contact or physical performance location is provided, the work is expected to support defense electronics supply chains through rigorous supplier qualification and component sourcing processes. All activities must ensure traceability, authenticity, and regulatory alignment with current DoD procurement guidelines.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 10 hours ago

DEADLINE

SCREW, CAP, HEXAGON H

Solicitation # SPE4A6-26-T-11KT

The contract is for 11 units of a hexagon cap screw identified by NSN 5305-01-710-8361, with a delivery requirement of 100 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger procurements, unless amended. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated; critical, major, and minor attributes are verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The item contains technical data subject to export controls under ITAR or EAR, requiring prior authorization for any export or disclosure to foreign persons, whether in the U.S. or abroad, and DFARS 252.225-7048 applies. Access to this controlled data is restricted to DLA contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and prior DLA authorization. The solicitation number is SPE4A6-26-T-11KT, issued on August 3, 2026, with responses due by August 11, 2026, under NAICS code 332722, and performance is to occur in Tracy, California, with primary point of contact Molitauoleava Langi.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 10 hours ago

DEADLINE