Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Quality Inspection and DCMA-Compliant Acceptance Support

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract mandates a final inspection of tube couplings at the destination, conducted in accordance with FAR 52.246-2 to ensure full compliance with quality standards. This includes rigorous verification of thread dimensions, surface plating integrity, and validation of material certifications to confirm adherence to specified technical requirements. The inspection process is designed to support formal acceptance by the Defense Contract Management Agency, ensuring that all delivered components meet Department of Defense expectations for performance and reliability. This subcontract falls under NAICS code 811211 and is administered by the Defense Logistics Agency under the Department of Defense. While details such as place of performance and point of contact are unspecified, the work is tied to a specific contract identifier and is subject to DCMA oversight. The solicitation was posted in June 2026 and is intended to facilitate post-delivery quality assurance, serving as a critical step in the acceptance lifecycle for defense-related tube coupling components.

General Info

Final inspection of tube couplings per FAR 52.246-2 for DoD acceptance by DCMA, verifying thread, plating, and certifications.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

811211 - Consumer Electronics Repair and MaintenanceView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE4A0-26-P-1999.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

NUT, TUBE COUPLING

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJun 24

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Final inspection of tube couplings at destination per FAR 52.246-2, verifying thread dimensions, plating, material certs, and supporting DCMA acceptance.

Similar Contracts

Same NAICS industry code

Marine Electronics Warranty and Technical Support

W6QM Micc-Ft Drum

POSTED

DEADLINE

Pressure Transmitter Repair and Modification

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

2-Year Instrument Maintenance Contract

USDA Forest Service

POSTED

DEADLINE

Medical Equipment MaintenanceThis subcontract opportunity for Medical Equipment Maintenance involves performing corrective repairs and preventative maintenance on clinical equipment for prime contractors working on Chesterfield County Sheriff's Department jail projects. The selected provider must utilize calibration tools and replacement parts to ensure all medical equipment is fully functional and must provide detailed maintenance logs as part of the deliverables. Qualified candidates must hold a Biomedical Equipment Technician certification and operate under NAICS code 811211. The solicitation was posted on September 4, 2026, with a response deadline of September 21, 2026. This project is managed by Chesterfield County in South Carolina.

Chesterfield County

POSTED

DEADLINE

Laser System Preventive Maintenance and SupportThis subcontract for the Defense Health Agency Hcd West involves providing ongoing preventive maintenance and technical support for ophthalmic lasers at JB Elmendorf AFB. The selected provider will perform routine calibration and hardware checks using specialized diagnostic tools to ensure the laser systems remain fully operational, with all work documented in detailed maintenance logs. The opportunity is a sole source set-aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 811211. A critical requirement for this contract is that the performing technician must hold manufacturer-certified biomedical technician status specifically for Lumenis systems. The response deadline for this requirement is September 18, 2026.

Defense Health Agency Hcd West

POSTED

DEADLINE

YELL - 17309 - Replace Yellowstone's Mobile and Portable LE RadiosThe Department of the Interior is seeking to replace the existing fleet of Motorola 6000 portable and 6500 mobile radios used by Yellowstone Law Enforcement, as these models are no longer supported by the manufacturer. This requirement is currently listed as a forecast under NAICS code 811211. The procurement process is managed by the National Park Service, with Cam Sholly serving as the primary point of contact. Interested parties can find further details through the acquisition gateway using the reference YELL - 17309.

POSTED

DEADLINE

Certified Small Arms Maintenance and Armorer ServicesThe Certified Small Arms Maintenance and Armorer Services subcontract, issued by the Department of Defense via Navsup Flt Logistics Ctr Norfolk, requires the performance of armorer-level maintenance and repair on NCIS standard-issue weapons and Navy common small arms. The scope of work involves maintaining and certifying platforms from Glock, Sig Sauer, ArmaLite, Mossberg, Benelli, and Remington using manufacturer-specific toolkits. Deliverables include fully maintained and certified weapon systems along with detailed maintenance logs. This opportunity is an 8(a) set-aside under NAICS code 811211, with the place of performance located in Quantico, Virginia. Qualified providers must possess a Secret clearance, NAC suitability, and the necessary manufacturer certifications to perform the work. The response deadline for this requirement is September 16, 2026.

Navsup Flt Logistics Ctr Norfolk

POSTED

DEADLINE

CSM Warranty, Calibration, and Technical Support Services

FA4600 55 Cons Pkp

POSTED

DEADLINE

Hearing Aid Maintenance and Repair

California Department of Corrections & Rehabilitation

POSTED

DEADLINE

Emergency Radiology DR Detector Repair and CalibrationThe Department of Veterans Affairs, through Network Contracting Office 6, is seeking a subcontractor to provide emergency repair, diagnostics, parts replacement, and calibration for a Philips Digital Radiography detector. The work will be performed at the Salem VA Medical Center to ensure the equipment is restored to full operational functionality in accordance with medical imaging standards. This subcontract opportunity falls under NAICS code 811211 and was posted on August 26, 2026. The primary objective is to restore critical radiology capabilities through specialized technical services and equipment calibration to maintain patient care standards.

246-NETWORK Contracting Office 6 (36C246)

POSTED

DEADLINE

Building Code Compliance and Final Inspection CoordinationThis subcontract, titled Building Code Compliance and Final Inspection Coordination, is issued by the Government of Jamaica through the Ministry of Agriculture Fisheries and Mining. The primary objective of the agreement is to ensure that staircase construction adheres to all applicable local building, fire, and safety codes. The scope of work includes the coordination of any necessary third-party inspections or certifications required to verify compliance. This project is categorized under NAICS code 811211 and was posted on August 24, 2026.

Ministry of Agriculture Fisheries and Mining

POSTED

DEADLINE

Preventive Maintenance of Diesel Standby GeneratorsThe American Consulate Jeddah, under the Department of State, is seeking a subcontractor for the preventive maintenance of low-voltage diesel standby generators. The scope of work includes performing scheduled inspections, fluid and filter replacements, greasing, valve lash adjustments, and critical electrical testing, such as Megger tests, to ensure operational reliability. This opportunity is categorized under NAICS code 811211 and will be performed in Jeddah, Saudi Arabia. Interested parties must submit their responses by the deadline of September 15, 2026, at 2:00 PM.

American Consulate Jeddah

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Storage Battery Supplier (NSN 6140-01-631-1794)

Battery Manufacturing

POSTED

DEADLINE

Storage Battery Supplier (NSN 6140-01-624-9682)

Battery Manufacturing

POSTED

DEADLINE

Military-Grade Packaging and Palletization Services

Packaging and Labeling Services

POSTED

DEADLINE

Supply of Uninterruptible Power Supplies (UPS)

Motor and Generator Manufacturing

POSTED

DEADLINE

Storage Battery Supplier (NSN 6140-21-913-9828)

Battery Manufacturing

POSTED

DEADLINE

MIL-SPEC Packaging and Hazardous Material Shipping

Freight Transportation Arrangement

POSTED

DEADLINE

Supply of Battery Assembly (6140-01-664-6369)

Storage Battery Manufacturing

POSTED

DEADLINE

Supply of Sediment Strainer (NSN 4730-01-589-9155)

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

DEADLINE

Supply of Schneider Electric Storage Battery (APC)

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2418

Solicitation SPE7L7-26-Q-2418 is a firm-fixed-price request for quotations issued by the Defense Logistics Agency Land and Maritime for the procurement of sealed lead acid storage batteries, identified by NSN 6140-01-624-9682. The requirement consists of two line items totaling eight units, with two units for item 0001 and six units for item 0002. Approved sources include EnerSys Delaware Inc. (part numbers ODS-AGM6M or PC2250) and Stored Energy Products, Inc. (part number PC2250). These items are designated as critical application items and are restricted source items requiring engineering source approval by the government design control activity. The batteries are classified as Type I (Code H) with a non-extendable shelf life of 12 months. Delivery is required within 60 days after receipt of the order, with shipping terms set as FOB Destination. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001, while hazardous materials must be handled according to IP025 and FAR 52.223-3. Quality assurance will be managed through destination inspection and acceptance using sampling methods such as MIL-STD-1916 or ASQ H1331. Award will be based on cost alone for quotes that conform to the solicitation requirements. Quotations must be submitted by September 21, 2026, and payment will be processed electronically via the Wide Area WorkFlow system.

Battery Manufacturing

POSTED

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2422

Solicitation SPE7L7-26-Q-2422 is a firm-fixed-price request for the procurement of one maintenance-free sealed lead-acid storage battery, identified as Schneider Electric IT Corporation part number APCRBC133 (NSN 6140-01-614-1949). The item is designated as Type I (Code H) with a non-extendable shelf life of 12 months. Delivery is required within 60 days after the order is placed, with inspection and acceptance occurring at the origin. The shipment is destined for the USS Harvey C Barnum Jr (DDG 124). The contract mandates strict adherence to quality and safety standards, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Because the item is a battery, it must comply with 49 CFR regulations for nonspillable batteries, requiring specific outer packaging, terminal protection, and durable nonspillable marking. Additionally, the contractor must comply with NAVSEA 5100-003D regarding mercury restrictions and provide a Certificate of Conformance. Sampling will be conducted per MIL-STD-1916 or ASQ H1331. Award will be based on the offeror's conformance to solicitation requirements and their ability to meet the specified technical and quality standards.

Battery Manufacturing

POSTED

DEADLINE

STRAINER, SEDIMENT

Solicitation # SPE7L7-26-Q-2420

The Defense Logistics Agency Land and Maritime has issued solicitation SPE7L7-26-Q-2420 for the procurement of one sediment strainer, identified by NSN 4730-01-589-9155. This is a firm fixed price contract with a required delivery date of 60 days after receipt of order. The item is to be delivered to the USS Michael Monsoor DDG 1001, with both inspection and acceptance occurring at the destination. Quotations must be submitted by September 21, 2026, and must remain valid for 90 days. Technical compliance requires adherence to TDP Rev C Gen 3 and basic drawing 80064 841499 Revision L. The contract mandates strict environmental and quality standards, including the prohibition of intentionally added mercury and class I ozone depleting chemicals. Packaging must comply with ASTM D3951 and MIL-STD-129, though the DLA Master List of Technical and Quality Requirements takes precedence. Palletization must follow RP001 guidelines. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment, and compliance with DFARS cybersecurity and Buy American certifications.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS