Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on April 20, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Quality Inspection and Product Verification Testing (PVT)

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380
New
SLED
Certified Hazardous Waste Analytical TestingThis subcontract opportunity with the California Department of Transportation involves providing certified chemical analyses of waste samples for prime contractors working on hazardous waste projects. The selected provider will conduct laboratory testing to determine disposal requirements and deliver analytical reports essential for manifest and profiling purposes. Performance of these services is centered in Inyo. To be eligible, the contractor must operate a state-certified laboratory holding both SWRCB-ELAP and CalEPA Environmental Laboratory Accreditation Program certifications. Interested parties must submit their responses by November 10, 2026, under NAICS code 541380.
California Department of Transportation

POSTED

about 10 hours ago

DEADLINE

in 14 days
NAICS: 541380
New
SLED
Lead Testing and Environmental SamplingThis subcontract for Lead Testing and Environmental Sampling supports prime contractors on Gwinnett County Government firing range projects. The scope of work involves performing lead-level testing and wipe sampling on cleaned surfaces and within mechanical rooms to ensure lead concentrations remain below the threshold of 400 ug/ft2. All activities must be conducted using lead sampling kits and laboratory analysis in strict accordance with EPA and OSHA lead testing standards. The selected provider is responsible for delivering comprehensive testing reports and official clearance documentation to verify that the facilities are safe for occupancy and use. This opportunity falls under NAICS code 541380 and is associated with the state of Georgia. Interested parties should note the response deadline of November 13, 2026.
Gwinnett County Government

POSTED

about 11 hours ago

DEADLINE

in 16 days
NAICS: 541380
New
SLED
Third-Party Construction Materials Testing & InspectionThis subcontract for Third-Party Construction Materials Testing and Inspection supports the University of Massachusetts Medical School West Garage Modernization projects in Shrewsbury. The selected provider will perform independent quality assurance, field inspections, and materials testing for concrete, asphalt, and steel to ensure all construction materials comply with engineering specifications. Key deliverables include the submission of certified test reports and detailed inspection logs. To qualify for this engagement, the contractor must hold professional PE licensure and maintain laboratory accreditation through AASHTO or ASTM. The solicitation was posted on October 27, 2026, with a response deadline of November 17, 2026. The project falls under NAICS code 541380 and is managed through the University of Massachusetts System.
University of Massachusetts System

POSTED

about 14 hours ago

DEADLINE

in 20 days
NAICS: 541380
New
SLED
West Garage Modernization - 3rd Party Testing
Solicitation # BD-27-1109-UMMS-UMMS-134854
The University of Massachusetts System, specifically the UMass Medical School, has issued solicitation BD-27-1109-UMMS-UMMS-134854 for third party construction materials testing and inspection services as part of the West Garage Modernization project. This open market procurement is based in Shrewsbury, Massachusetts, with the performance of services occurring at the Washington Street location. The solicitation was posted on October 27, 2026, and requires responses by November 17, 2026. Administrative oversight is managed by the UPST Procurement Office, with Toby Lau serving as the primary purchaser. All inquiries and billing are directed to the office located at 50 Washington Street, Shrewsbury, MA 01581. While the contract specifies a single line item for the required testing and inspection services, the total contract value and specific unit pricing are not disclosed in the provided documentation. Proposals must be submitted through the COMMBUYS system.
University of Massachusetts System

POSTED

about 14 hours ago

DEADLINE

in 20 days
NAICS: 541380
New
SLED
Structural Special Inspections and Third-Party ReviewThis subcontract involves providing independent third-party structural reviews and special inspections for prime contractors working on University of Connecticut facility projects. The scope of work includes conducting special inspections for concrete, masonry, and steel, as well as performing construction observation and reviewing material submittals. The selected provider is responsible for delivering comprehensive inspection reports and Statements of Special Inspections to ensure project compliance. To qualify for this engagement, the provider must hold a Connecticut Professional Engineering license and possess all relevant inspector certifications. Managed by DAS Procurement for the state of Connecticut, the solicitation was posted on October 27, 2026, with a response deadline of November 24, 2026. The contract falls under NAICS code 541380.
DAS Procurement

POSTED

about 15 hours ago

DEADLINE

in 27 days
NAICS: 541380
New
SLED
Material Testing Services
CITY OF WACO

POSTED

about 16 hours ago

DEADLINE

in about 1 month
NAICS: 541380
New
SLED
Construction Materials Testing (CMT)This subcontract for Construction Materials Testing (CMT) involves providing specialized laboratory testing services for prime contractors operating on projects at California State University, Chico. The scope of work includes the collection of field samples for asphalt, soil, and concrete, followed by rigorous laboratory analysis to determine composition, compaction, and strength utilizing sieves and compression machines. All testing procedures must strictly adhere to ASTM standards to ensure structural integrity and quality control. The selected provider is responsible for delivering detailed daily reports and comprehensive material test result summaries. This opportunity is categorized under NAICS code 541380 and is centered in Chico, California. Interested parties must submit their responses by the deadline of November 5, 2026.
California State University, Chico

POSTED

about 18 hours ago

DEADLINE

in 9 days
NAICS: 541380
New
SLED
Certified Welding Inspection ServicesThis subcontract for Certified Welding Inspection Services involves providing specialized inspection and testing of structural steel components and welding for prime contractors at California State University, Chico. The scope of work includes conducting visual inspections of welds, performing non-destructive testing on structural joints, and verifying that all welding procedures are followed correctly. All services must be delivered in the form of detailed welding inspection reports and test results. To ensure quality and safety, the contractor must employ AWS/SNT Certified Welding Inspectors and maintain strict compliance with AWS and ANSI standards. The project is located in Chico, California, under NAICS code 541380. Interested parties must submit their responses by the deadline of November 5, 2026.
California State University, Chico

POSTED

about 18 hours ago

DEADLINE

in 9 days
NAICS: 541380
New
SLED
Campus Consulting – Construction Materials Testing And Special Inspection Services
Solicitation # RFP2026-08AM
California State University, Chico is soliciting proposals under RFP2026-08AM for a non-exclusive Task Order Service Agreement to provide special inspection and materials testing services. The selected service provider will supply certified staff, including ICBO Certified Special Inspectors and AWS/SNT Certified Welding Inspectors, to support contractors on an as-needed basis. All work must comply with the 2025 California Building Code and relevant ASTM, ICBO, and ANSI standards. The contract has an initial term of two years, with the option to renew for two additional two-year terms. Proposals are due by November 5, 2026, at 3:00 PM and must be submitted electronically to Amber Marquis. Evaluation criteria include a standard fee schedule, firm experience, staffing resumes, project history regarding scale and average cost, and specific experience with California State University institutions. Awarded providers must register with the Department of Industrial Relations for prevailing wage compliance and maintain comprehensive general liability insurance with a 4 million dollar general aggregate. Additionally, the contract requires that all work be performed within the United States and prohibits the provider from advising the university on public contracting. Payments will be processed monthly in arrears using the CSU invoice format.
California State University, Chico

POSTED

about 18 hours ago

DEADLINE

in 9 days
NAICS: 541380
New
International
Water Treatment & Chemical Dosing SystemsThis subcontract for Water Treatment and Chemical Dosing Systems involves providing specialized maintenance for automated chemical dosing systems on facility projects for the City and County of Swansea. The scope of work includes calibrating dosing pumps, testing and balancing pool water chemistry, and repairing dosing controllers and sensors. A critical component of the contract is ensuring strict compliance with health and safety standards regarding the handling of hazardous chemicals. The selected provider is responsible for delivering fully calibrated dosing systems and detailed water quality compliance reports. This opportunity was posted on October 27, 2026, with a response deadline of November 23, 2026. The project falls under NAICS code 541380 and is designed to support prime contractors operating within the City and County of Swansea.
City & County of Swansea

POSTED

about 19 hours ago

DEADLINE

in 26 days
NAICS: 541380
New
International
Groundwater Sampling and Compliance TestingThis subcontract opportunity involves providing groundwater sampling and contaminant analysis for prime contractors working on projects for the Government of Ontario's Ministry of Environment, Conservation and Parks. The selected provider will be responsible for conducting quarterly water sample collection and analysis to ensure strict adherence to the City of Peterborough's municipal sewer use by-laws and Discharge Permit. To qualify for this engagement, the service provider must hold an accredited environmental laboratory certification. Key deliverables include the submission of quarterly analytical reports and formal compliance certifications. Interested parties must submit their responses by November 27, 2026.
Environment, Conservation and Parks

POSTED

about 19 hours ago

DEADLINE

in about 1 month
NAICS: 541380
New
SLED
Asphalt and Concrete Materials TestingThis subcontract for Asphalt and Concrete Materials Testing involves providing specialized laboratory testing and calibration services for prime contractors working on Virginia Department of Transportation projects in Prince William County. The scope of work includes the preparation of job-mix formulas for asphalt and Crushed Hydraulic Cement Concrete, aggregate property testing, and ignition furnace calibration in accordance with VTM 102. To be eligible, the contractor must operate a VDOT-approved testing laboratory and be capable of delivering certified test results and approved job-mix formulas. The solicitation was posted on October 27, 2026, with a response deadline of November 18, 2026, falling under NAICS code 541380.
Virginia Department of Transportation

POSTED

about 19 hours ago

DEADLINE

in 21 days

AI Contract Overview

Show more

The contract entails performing independent inspection and testing services on compressor blades, focusing specifically on Quality Inspection and Product Verification Testing (PVT). The contractor is responsible for submitting PVT samples accompanied by DD Form 1222 and providing traceability documentation that supports lot acceptance, ensuring compliance with required specifications and standards. This subcontract opportunity, issued by the Department of Defense through SPRMM1 DLA Mechanicsburg, falls under NAICS code 541380. Although the solicitation number and office location details are not provided, the posting date is April 20, 2026, with a response deadline of May 8, 2026, at 8:30 AM. The contract emphasizes rigorous quality assurance protocols in support of defense logistics, underscoring the importance of traceability and documentation in the acceptance of compressor blade lots.

General Info

Perform independent inspection and testing of compressor blades with traceability and documentation compliance.

Agency

Department Of Defense → SPRMM1 DLA Mechanicsburg

NAICS

541380 - Testing Laboratories and Services

Place of Performance

PA

Set-Aside

NONE

Documents

This scope was carved out of SPRMM126QHC43.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BLADE,COMPRESSOR,AI

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → SPRMM1 DLA Mechanicsburg
ContactsNo contacts available
OfficeN/A
Organization / AgencyDepartment Of Defense → SPRMM1 DLA Mechanicsburg
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Independent inspection and testing of compressor blades, including submission of PVT samples with DD Form 1222 and traceability documentation to support lot acceptance.

More opportunities from Department Of Defense → SPRMM1 DLA Mechanicsburg

Same awarding agency

NAICS: 488410
New
Federal
MIL-SPEC Packaging and Preservation for Mechanical AssembliesThis subcontract involves providing specialized preservation, packaging, and marking services for mechanical conduit assemblies supporting prime contractors on DLA Mechanicsburg supply contracts. The scope of work requires the use of industrial marking and labeling equipment to ensure all items are processed and delivered ready for FOB Destination shipment. Compliance is mandatory with specific military standards, including MIL-STD-2073 for packing and preservation, as well as MIL-STD-129 and SPI 03950-10184 for package marking. This Department of Defense requirement falls under NAICS code 488410 and is managed by the SPRMM1 DLA Mechanicsburg agency.
Motor Vehicle Towing

POSTED

about 21 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332710
New
Federal
Manufacture of Mechanical Conduit AssembliesThis subcontract involves the manufacture of custom mechanical conduit assemblies for prime contractors supporting DLA Mechanicsburg. The scope of work requires the fabrication of three specific assemblies identified by NIINs 017027712, 017027714, and 017027719. All production must strictly adhere to TDP Version 002 and specified CAGE codes, with physical identification meeting MIL-STD-130, Rev N standards. To qualify, the provider must possess precision machining equipment and maintain CMMC certification. It is explicitly noted that additive manufacturing is prohibited for these components. The opportunity is categorized under NAICS code 332710 and is managed by the Department of Defense.
Machine Shops

POSTED

about 21 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334111
New
Federal
Supply of Flat Panel Monitors (NSN 7025-01-738-4182)This subcontract involves the procurement and delivery of 20 flat panel monitors, identified by NSN 7025-01-738-4182, to support prime contractors for DLA Mechanicsburg. The selected provider is responsible for manufacturing or procuring the monitors according to specified Cage Codes, ensuring all items undergo quality assurance and are marked in accordance with MIL-STD-130, REV N. Additionally, all products must be preserved and packed following MIL-STD-2073 guidelines before being delivered to destination PA5CTQ. To qualify, the contractor must provide proof of being an OEM CAGE code holder or an authorized distributor and must maintain CMMC Level 1 self-certification. This requirement falls under NAICS code 334111 and is managed by the Department of Defense through the SPRMM1 DLA Mechanicsburg agency.
Electronic Computer Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332710
New
Federal
CONDUIT ASSEMBLY,ME
Solicitation # SPRMM127QGA28
Solicitation SPRMM1-27-Q-GA28, issued by DLA Mechanicsburg on October 27, 2026, seeks quotes for the manufacture and supply of multiple Conduit Assembly, ME units. The requirement includes specific National Item Identification Numbers (NIINs) and requires the items to be physically identified according to MIL-STD-130, Rev N. The procurement is issued under SEPA-EAF Authority, with delivery expected as soon as possible on a FOB Destination basis. Inspection and acceptance are both designated to occur at the origin. The contract mandates strict adherence to quality and packaging standards, specifically MIL-STD-2073-1 for preservation and MIL-STD-129 for marking. Offerors must be authorized distributors of the original manufacturer and must provide the Original Equipment Manufacturer (OEM) CAGE code and part number if they are not the manufacturer. Technical acceptability is the primary evaluation factor, with a prohibition on additive manufacturing unless specifically authorized. Administrative requirements include electronic invoicing via the Wide Area Workflow (WAWF) system and compliance with cybersecurity standards under DFARS 252.204-7012 and CMMC certification levels.
Machine Shops

POSTED

about 21 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332710
New
Federal
CHASSIS,VME,12 SLOT
Solicitation # SPRMM126QMB73
Machine Shops

POSTED

about 21 hours ago

DEADLINE

in 28 days
View Details
NAICS: 333998
New
Federal
MONITOR,FLAT PANEL
Solicitation # SPRMM126QKH35
This solicitation, issued by DLA Mechanicsburg, is for the manufacture and delivery of 20 flat panel monitors (NSN 7025-01-738-4182). The procurement will be awarded based on the Lowest Price Technically Acceptable (LPTA) criteria. Offerors must provide the Original Equipment Manufacturer (OEM) CAGE code and part number, and authorized distributors must provide proof of authorization on company letterhead. Technical acceptability may be verified through original quotations, invoices, or contractual agreements from approved sources. The contract requires strict adherence to MIL-STD-130 for marking and MIL-STD-2073 for packaging, with specific DLR labeling requirements for applicable items. Inspection and acceptance will occur at the origin, and the contractor is responsible for all quality assurance and the maintenance of inspection records for 365 days post-delivery. Payment and invoicing must be processed electronically via PIEE-WAWF using the SPRMM1 DoDAAC. Additionally, the contractor must comply with CMMC Level 1 self-certification and various cybersecurity and trade agreement certifications, including the Buy American Act.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 2 days
View Details
New
Federal
48--VALVE,REGULATING,FL
Solicitation # SPRMM126QKJ13
The Department of Defense, through DLA Maritime Mechanicsburg, is conducting a sources sought market survey under solicitation SPRMM126QKJ13 for the procurement of 13 regulating valves. The required items are identified by NSN 7H-4820-011728194 and part number 73850-2MOD1. This is a Foreign Military Sales requirement, and the final destination will be provided upon request. The government has determined that it is uneconomical to purchase the data rights or reverse engineer the part, and as such, it does not own the technical data required for the repair or purchase of this item from additional sources. The government intends to solicit and negotiate with a single source under the authority of FAR 6.302-1, though it is currently seeking capability statements and interest from all responsible sources to determine if a competitive procurement is warranted. This action is designated as a total small business set-aside. Interested parties must submit their responses by December 11, 2026. The government is specifically requesting information regarding the commercial status of the item per FAR 2.101(b), typical delivery lead times, and whether FOB Origin and Inspection/Acceptance Origin terms are acceptable. All inquiries and submissions should be directed to Alexander Davies.

POSTED

about 21 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 339999
New
Federal
MIL-SPEC Marking and DLR PackagingThis subcontract, titled MIL-SPEC Marking and DLR Packaging, involves providing specialized marking and packaging services for prime contractors under DLA/NAVSUP supply contracts. The scope of work focuses on the physical identification of IMU-NT3 units in accordance with MIL-STD-130 and the application of DLR labels featuring yellow text on a blue background per MIL-STD-129. Additionally, the contractor is responsible for applying specific color-coded SMIC code markings, including L1, S1, and D4/D5/D7. The project requires the execution of palletization and final packaging following MIL-STD-1330 standards to ensure units are ready for transport. Managed by the Department of Defense through the SPRMM1 DLA Mechanicsburg agency, the opportunity falls under NAICS code 339999. The response deadline for this requirement is November 9, 2026.
All Other Miscellaneous Manufacturing

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 334413
New
Federal
Precision Manufacture of Inertial Measurement Unit (IMU-NT3)This subcontract, managed by the Department of Defense through SPRMM1 DLA Mechanicsburg, involves the precision manufacture of Inertial Measurement Unit (IMU-NT3) hardware components for prime contractors on DLA/NAVSUP supply contracts. The scope of work requires the fabrication and assembly of units in strict accordance with TDP Version 002 and design reference DTS10095-01-002. The contractor must adhere to rigorous quality and regulatory standards, including MIL-STD-130 and MIL-STD-129, while implementing a comprehensive Counterfeit Detection and Avoidance Program (CDAP) to ensure supply chain traceability. Final deliverables consist of completed IMU-NT3 hardware units accompanied by full traceability documentation. The opportunity is categorized under NAICS code 334413.
Semiconductor and Related Device Manufacturing

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
Federal
IMU-NT3
Solicitation # SPRMM127QGA27
This solicitation, issued under Emergency Acquisition authority by DLA Mechanicsburg, seeks the manufacture of the IMU-NT3 (NIIN: 016939087) in accordance with the design represented by Cage Code 34NS0 and Technical Data Package version 002. Award evaluations will be conducted using the Lowest Price Technically Acceptable (LPTA) criteria. The contract requires strict adherence to MIL-STD-130 for physical identification and MIL-STD-2073-1 for preservation and packaging, with specific requirements for domestic and overseas shipments. Inspection and acceptance will occur at the origin, with the contractor maintaining primary responsibility for quality assurance and record retention for 365 days following final delivery. The procurement mandates the use of PIEE-WAWF for electronic submission of invoices and receiving reports. Offerors who are not the original equipment manufacturer must identify the OEM and, if acting as a distributor, provide signed proof of authorization on company letterhead. Additionally, any hazardous materials delivered under this contract require the submission of GHS-compliant labels and Safety Data Sheets to NAVSUP WS Code N242 prior to award. The solicitation also incorporates the Federal Acquisition Supply Chain Security Act prohibitions and requires offerors to certify their tax liability and criminal conviction status.
Electronic Connector Manufacturing

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 334412
New
Federal
OSCILLOSCOPE
Solicitation # SPRMM126QHD57
Solicitation SPRMM1-26-Q-HD57, issued by DLA Mechanicsburg, is a small business set-aside request for the manufacture and delivery of an oscilloscope, NSN 6625-01-716-1472. The required item must conform to the design represented by Cage Code 82199, reference number MXO4-B2410, and Technical Data Package version O04. Award will be determined based on the Lowest Price Technically Acceptable (LPTA) criteria, with technical acceptability defined as full compliance with solicitation instructions and no exceptions taken to the terms. The procurement is being conducted under FAR Part 18 Emergency Acquisition Flexibilities. The contractor is responsible for all inspection and acceptance at the point of origin, with records maintained for 365 days post-delivery. Packaging must adhere to MIL-STD-2073-1, with specific requirements for domestic and overseas shipments, and physical identification must comply with MIL-STD-130, Rev N. All invoicing and receiving reports must be submitted electronically via the PIEE-WAWF system. Offerors who are not the original equipment manufacturer must identify the OEM, their CAGE code, and the specific part number being offered. The final deadline for the receipt of offers is October 30, 2026, at 4:30 PM local time.
Bare Printed Circuit Board Manufacturing

POSTED

2 days ago

DEADLINE

in 2 days
View Details
NAICS: 332919
New
Federal
VALVE,SAFETY RELIEF
Solicitation # SPRMM126QGG52
This solicitation, issued by DLA Mechanicsburg, is a total small business set-aside for the manufacture of safety relief valves for the MK-91 MOD-3 (GMFCS) NATO. Award will be determined based on the Lowest Price Technically Acceptable (LPTA) criteria. The procurement mandates higher-level inspection and requires the finished products to meet the design specifications represented by Cage Codes 4J831 and 71905, specifically referencing drawing 2888350. All items must be physically identified per MIL-STD-130, Rev N, and packaged according to MIL-STD-2073. The contract imposes rigorous quality assurance requirements, including the submission of test procedures for government approval via DD Form 1423 prior to production. The contractor must perform a non-destructive First Article Test on one unit and conduct 100 percent production lot testing. Inspection and acceptance will occur at the origin. Administrative requirements include the electronic submission of invoices and receiving reports through PIEE-WAWF and the mandatory identification of the Original Equipment Manufacturer (OEM) and their CAGE code for any offerors acting as distributors.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

2 days ago

DEADLINE

in 20 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 541380
Closed
Federal
Quality Inspection and Conformance Certification
Al DLA Aviation At Huntsville

POSTED

6 months ago

CLOSED

5 months ago
View Details
NAICS: 541380
Closed
Federal
Calibration of Test, Measurement, and Diagnostic Equipment (TMDE)
Al DLA Aviation At Huntsville

POSTED

6 months ago

CLOSED

5 months ago
View Details
NAICS: 541380
Closed
Federal
Testing & Certification Services
Division Of Engineering Svcs - Seattle

POSTED

6 months ago

CLOSED

5 months ago
View Details
NAICS: 541380
Closed
Federal
Production Lot Testing and Quality Assurance
W6QK Acc- Dta

POSTED

6 months ago

CLOSED

5 months ago
View Details
NAICS: 541380
Closed
Federal
Materials Testing and Objective Quality Evidence (OQE) Services
Navsup Weapon Systems Support Mech

POSTED

6 months ago

CLOSED

5 months ago
View Details
NAICS: 541380
Federal
Precision Cleaning and Testing Services
SPRMM1 DLA Mechanicsburg

POSTED

6 months ago

DEADLINE

N/A
View Details
NAICS: 541380
Closed
Federal
Quality Inspection and Testing Services
SPRMM1 DLA Mechanicsburg

POSTED

6 months ago

CLOSED

3 months ago
View Details
NAICS: 541380
Federal
Quality Assurance and Inspection Services
W6QM Micc-ft Knox

POSTED

6 months ago

DEADLINE

N/A
View Details
NAICS: 541380
Closed
Federal
Medical Gas Outlet/Inlet Inspection & Testing
Phoenix Area Indian Health Svc

POSTED

6 months ago

CLOSED

5 months ago
View Details
NAICS: 541380
Closed
Federal
Non-Destructive Testing and Radiographic Inspection
Navsup Weapon Systems Support Mech

POSTED

6 months ago

CLOSED

5 months ago
View Details
NAICS: 541380
Closed
Federal
Computed Tomography (CT) Scanning Services
FA8213 Aflcmc Ebhk

POSTED

6 months ago

CLOSED

6 months ago
View Details
NAICS: 541380
Closed
Federal
Explosive Core Testing and Thermal Cycling Services
FA8213 Aflcmc Ebhk

POSTED

6 months ago

CLOSED

6 months ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS