Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Supply of Flat Panel Monitors (NSN 7025-01-738-4182)

Active

Federal

Response Deadline10/30/2026, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the procurement and delivery of 20 flat panel monitors, identified by NSN 7025-01-738-4182, to support prime contractors for DLA Mechanicsburg. The selected provider is responsible for manufacturing or procuring the monitors according to specified Cage Codes, ensuring all items undergo quality assurance and are marked in accordance with MIL-STD-130, REV N. Additionally, all products must be preserved and packed following MIL-STD-2073 guidelines before being delivered to destination PA5CTQ. To qualify, the contractor must provide proof of being an OEM CAGE code holder or an authorized distributor and must maintain CMMC Level 1 self-certification. This requirement falls under NAICS code 334111 and is managed by the Department of Defense through the SPRMM1 DLA Mechanicsburg agency.

General Info

Procure and deliver 20 flat panel monitors to DLA Mechanicsburg per military standards.

Agency

Department Of Defense → SPRMM1 DLA Mechanicsburg

NAICS

334111 - Electronic Computer Manufacturing

Place of Performance

PA

Set-Aside

NONE

Documents

This scope was carved out of SPRMM126QKH35.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

MONITOR,FLAT PANEL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 27

subcontract

Response DeadlineOct 30

Submission deadline

Response Deadline

10/30/2026, 08:30:00 PM UTCin 3 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → SPRMM1 DLA Mechanicsburg

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → SPRMM1 DLA Mechanicsburg

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies 20 flat panel monitors for prime contractors delivering DLA Mechanicsburg supply contracts. Manufactures or procures monitors per specified Cage Codes, performs quality assurance, and marks items per MIL-STD-130, REV N. Preserves and packs items per MIL-STD-2073. Requires OEM CAGE code or authorized distributor proof and CMMC Level 1 self-certification. Delivers 20 packaged monitors to destination PA5CTQ.

Similar Contracts

Same NAICS industry code

COMPUTER SYSTEM, DIGITA

Solicitation # SPE8EN-27-T-0021

Solicitation SPE8EN-27-T-0021 is a HUBZone Small Business Set-Aside issued by DLA Troop Support for the procurement of 10 digital computer systems, specifically the Getac S410 model (NSN 7010-01-665-7339). The required hardware features an i7-1165G7 processor, 32GB RAM, 1TB PCIe SSD, Windows 10 Pro, and integrated 4G LTE with GPS/Glonass. Delivery is required within 56 days after order, with shipping terms set as FOB Origin and both inspection and acceptance occurring at the destination, DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to DLA technical and quality requirements, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Special material restrictions prohibit the intentional addition of mercury, and offerors must comply with the Buy American Act and the Berry Amendment. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with NIST SP 800-171 for safeguarding covered defense information. This procurement is conducted under the First Destination Transportation program to optimize shipping costs.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 15 hours ago

DEADLINE

INTERFACE UNIT, DATA

Solicitation # SPE8EN-27-T-0214

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 15 hours ago

DEADLINE

SAC System Hardware/Equipment Supplier

Environment, Conservation and Parks

POSTED

about 18 hours ago

DEADLINE

Berry Compliant Expeditionary Shelter FabricationThis subcontract opportunity with DLA Troop Support involves the fabrication and supply of exterior waterproof fabric and insulated removable liners for expeditionary kitchen projects. The selected provider will produce a softsided textile structure designed for rapid deployment in under six minutes, ensuring all materials meet MIL-PRF-44103D specifications. The project requires strict adherence to Berry Compliance for all materials used in the exterior fabric shell and interior insulated liner. Performance for this contract will take place in Natick, and responses are due by November 4, 2026.

DLA Troop Support

POSTED

about 20 hours ago

DEADLINE

Solicitation # N0017827Q6613

POSTED

about 20 hours ago

DEADLINE

N0038326PR0R524_FMS

Solicitation # N0038327QN143

Navsup Weapon Systems Support

POSTED

about 20 hours ago

DEADLINE

in about 1 month

Fiber Optic Closures and Pedestals SupplierThis subcontract agreement involves the supply and delivery of fiber optic closures and pedestals for prime contractors working on City of Bainbridge fiber supply projects. The selected supplier is responsible for providing hardware from Charles or an approved equivalent and ensuring the completed units are delivered directly to the City. The opportunity is categorized under NAICS code 334111 and was posted on October 26, 2026. Interested parties must submit their responses by the deadline of November 25, 2026, at 4:00 PM.

City of Bainbridge

POSTED

DEADLINE

Flat Drop/Tonable Fiber Optic Cable SupplierThis subcontract opportunity is for a supplier to provide and deliver flat drop/tonable fiber optic cables to prime contractors working on City of Bainbridge fiber supply projects in Georgia. The scope of work specifically requires the provision of 200 foot lengths of 1CT Flat Drop/Tonable fiber, utilizing materials from Corning, CommScope, or other approved equivalents. The solicitation was posted on October 26, 2026, with a response deadline of November 25, 2026. Classified under NAICS code 334111, this contract focuses on the delivery of completed fiber optic cabling to support municipal infrastructure improvements.

City of Bainbridge

POSTED

DEADLINE

Armored/Loose Tube Fiber Optic Cable SupplierThis subcontract agreement establishes a supplier for gel-free armored or loose tube fiber optic cables to support prime contractors on City of Bainbridge fiber supply projects in Georgia. The scope of work requires the delivery of completed spools in various capacities, specifically 10,000 foot lengths for 12CT, 24CT, 48CT, 72CT, 144CT, and 288CT fiber, as well as 20,000 foot lengths for 96CT fiber. Approved materials for these installations include products from Corning, CommScope, or an approved equivalent. The solicitation was posted on October 26, 2026, with a response deadline set for November 25, 2026. This procurement falls under NAICS code 334111.

City of Bainbridge

POSTED

DEADLINE

Industrial PC and Networking Hardware SupplyThis subcontract involves the supply of specialized computing and communication hardware for robot workstations supporting prime contractors on NASA Shared Services Center projects. The scope of work requires the delivery of one Advantech TPC-B520 Built-to-Order PC and one Antaira Technologies 10-port POE Unmanaged Ethernet Switch, both of which must adhere strictly to manufacturer specifications. Classified under NAICS code 334111, the contract was posted on October 26, 2026, with a response deadline of November 2, 2026. The primary objective is the procurement and delivery of these industrial PC and networking components to ensure the operational functionality of the designated robotic workstations.

NASA Shared Services Center

POSTED

DEADLINE

Supermicro 1U rack-mount server assemblies

Solicitation # SLAC_368659_Supermicro_1U_Rack-mount_Server_Assemblies

SLAC National Accelerator Laboratory, operated by Stanford University for the Department of Energy, is soliciting quotes for twelve Supermicro 1U rack-mount server assemblies, model AS-1115HS-TNR. Each server must be configured with one AMD EPYC Turin 9255 CPU, 64GB of DDR5 ECC memory (2x 32GB), and a Supermicro DCMS license. Storage options include either no drive or one 240GB SATA drive, and network requirements specify either a 10GbE 4-port RJ45 or a combination of 2x SFP+ and 2x RJ45. This is a product-only procurement with no on-site services permitted. Quotes must be submitted by October 16, 2026, to Cheryl Stafford. The resulting purchase order will be a fixed-price contract with NET-30 payment terms. Source selection will be based on the Lowest Priced Technically Acceptable method and the best lead time. Domestic shipments are FOB Destination Prepaid and Add, while foreign shipments are CIP SLAC, Menlo Park, Duty Unpaid. Offerors must be registered in the System for Award Management and provide a completed Representations and Certifications Rider. Additionally, proposals must include the Harmonized Tariff Schedule code and Export Control Classification Number where applicable. Buy American Act certification is required for unit prices exceeding 15,000 dollars. While not direct Federal procurements, these subcontracts incorporate various FAR and DEAR clauses depending on the final contract value.

Slac National Accel Labor -Doe Contractor

POSTED

DEADLINE

IT Solution for UIN

Solicitation # 19AQMM27Q0008

Acquisitions - Aqm Momentum

POSTED

DEADLINE

More opportunities from Department Of Defense → SPRMM1 DLA Mechanicsburg

Same awarding agency

MIL-SPEC Packaging and Preservation for Mechanical Assemblies

Motor Vehicle Towing

POSTED

about 20 hours ago

DEADLINE

Manufacture of Mechanical Conduit Assemblies

POSTED

about 20 hours ago

DEADLINE

CONDUIT ASSEMBLY,ME

Solicitation # SPRMM127QGA28

Solicitation SPRMM1-27-Q-GA28, issued by DLA Mechanicsburg on October 27, 2026, seeks quotes for the manufacture and supply of multiple Conduit Assembly, ME units. The requirement includes specific National Item Identification Numbers (NIINs) and requires the items to be physically identified according to MIL-STD-130, Rev N. The procurement is issued under SEPA-EAF Authority, with delivery expected as soon as possible on a FOB Destination basis. Inspection and acceptance are both designated to occur at the origin. The contract mandates strict adherence to quality and packaging standards, specifically MIL-STD-2073-1 for preservation and MIL-STD-129 for marking. Offerors must be authorized distributors of the original manufacturer and must provide the Original Equipment Manufacturer (OEM) CAGE code and part number if they are not the manufacturer. Technical acceptability is the primary evaluation factor, with a prohibition on additive manufacturing unless specifically authorized. Administrative requirements include electronic invoicing via the Wide Area Workflow (WAWF) system and compliance with cybersecurity standards under DFARS 252.204-7012 and CMMC certification levels.

POSTED

about 20 hours ago

DEADLINE

CHASSIS,VME,12 SLOT

Solicitation # SPRMM126QMB73

POSTED

about 20 hours ago

DEADLINE

MONITOR,FLAT PANEL

Solicitation # SPRMM126QKH35

This solicitation, issued by DLA Mechanicsburg, is for the manufacture and delivery of 20 flat panel monitors (NSN 7025-01-738-4182). The procurement will be awarded based on the Lowest Price Technically Acceptable (LPTA) criteria. Offerors must provide the Original Equipment Manufacturer (OEM) CAGE code and part number, and authorized distributors must provide proof of authorization on company letterhead. Technical acceptability may be verified through original quotations, invoices, or contractual agreements from approved sources. The contract requires strict adherence to MIL-STD-130 for marking and MIL-STD-2073 for packaging, with specific DLR labeling requirements for applicable items. Inspection and acceptance will occur at the origin, and the contractor is responsible for all quality assurance and the maintenance of inspection records for 365 days post-delivery. Payment and invoicing must be processed electronically via PIEE-WAWF using the SPRMM1 DoDAAC. Additionally, the contractor must comply with CMMC Level 1 self-certification and various cybersecurity and trade agreement certifications, including the Buy American Act.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 20 hours ago

DEADLINE

48--VALVE,REGULATING,FL

Solicitation # SPRMM126QKJ13

The Department of Defense, through DLA Maritime Mechanicsburg, is conducting a sources sought market survey under solicitation SPRMM126QKJ13 for the procurement of 13 regulating valves. The required items are identified by NSN 7H-4820-011728194 and part number 73850-2MOD1. This is a Foreign Military Sales requirement, and the final destination will be provided upon request. The government has determined that it is uneconomical to purchase the data rights or reverse engineer the part, and as such, it does not own the technical data required for the repair or purchase of this item from additional sources. The government intends to solicit and negotiate with a single source under the authority of FAR 6.302-1, though it is currently seeking capability statements and interest from all responsible sources to determine if a competitive procurement is warranted. This action is designated as a total small business set-aside. Interested parties must submit their responses by December 11, 2026. The government is specifically requesting information regarding the commercial status of the item per FAR 2.101(b), typical delivery lead times, and whether FOB Origin and Inspection/Acceptance Origin terms are acceptable. All inquiries and submissions should be directed to Alexander Davies.

POSTED

about 20 hours ago

DEADLINE

in about 1 month

MIL-SPEC Marking and DLR PackagingThis subcontract, titled MIL-SPEC Marking and DLR Packaging, involves providing specialized marking and packaging services for prime contractors under DLA/NAVSUP supply contracts. The scope of work focuses on the physical identification of IMU-NT3 units in accordance with MIL-STD-130 and the application of DLR labels featuring yellow text on a blue background per MIL-STD-129. Additionally, the contractor is responsible for applying specific color-coded SMIC code markings, including L1, S1, and D4/D5/D7. The project requires the execution of palletization and final packaging following MIL-STD-1330 standards to ensure units are ready for transport. Managed by the Department of Defense through the SPRMM1 DLA Mechanicsburg agency, the opportunity falls under NAICS code 339999. The response deadline for this requirement is November 9, 2026.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Precision Manufacture of Inertial Measurement Unit (IMU-NT3)This subcontract, managed by the Department of Defense through SPRMM1 DLA Mechanicsburg, involves the precision manufacture of Inertial Measurement Unit (IMU-NT3) hardware components for prime contractors on DLA/NAVSUP supply contracts. The scope of work requires the fabrication and assembly of units in strict accordance with TDP Version 002 and design reference DTS10095-01-002. The contractor must adhere to rigorous quality and regulatory standards, including MIL-STD-130 and MIL-STD-129, while implementing a comprehensive Counterfeit Detection and Avoidance Program (CDAP) to ensure supply chain traceability. Final deliverables consist of completed IMU-NT3 hardware units accompanied by full traceability documentation. The opportunity is categorized under NAICS code 334413.

Semiconductor and Related Device Manufacturing

POSTED

DEADLINE

Solicitation # SPRMM127QGA27

This solicitation, issued under Emergency Acquisition authority by DLA Mechanicsburg, seeks the manufacture of the IMU-NT3 (NIIN: 016939087) in accordance with the design represented by Cage Code 34NS0 and Technical Data Package version 002. Award evaluations will be conducted using the Lowest Price Technically Acceptable (LPTA) criteria. The contract requires strict adherence to MIL-STD-130 for physical identification and MIL-STD-2073-1 for preservation and packaging, with specific requirements for domestic and overseas shipments. Inspection and acceptance will occur at the origin, with the contractor maintaining primary responsibility for quality assurance and record retention for 365 days following final delivery. The procurement mandates the use of PIEE-WAWF for electronic submission of invoices and receiving reports. Offerors who are not the original equipment manufacturer must identify the OEM and, if acting as a distributor, provide signed proof of authorization on company letterhead. Additionally, any hazardous materials delivered under this contract require the submission of GHS-compliant labels and Safety Data Sheets to NAVSUP WS Code N242 prior to award. The solicitation also incorporates the Federal Acquisition Supply Chain Security Act prohibitions and requires offerors to certify their tax liability and criminal conviction status.

Electronic Connector Manufacturing

POSTED

DEADLINE

Solicitation # SPRMM126QHD57

Solicitation SPRMM1-26-Q-HD57, issued by DLA Mechanicsburg, is a small business set-aside request for the manufacture and delivery of an oscilloscope, NSN 6625-01-716-1472. The required item must conform to the design represented by Cage Code 82199, reference number MXO4-B2410, and Technical Data Package version O04. Award will be determined based on the Lowest Price Technically Acceptable (LPTA) criteria, with technical acceptability defined as full compliance with solicitation instructions and no exceptions taken to the terms. The procurement is being conducted under FAR Part 18 Emergency Acquisition Flexibilities. The contractor is responsible for all inspection and acceptance at the point of origin, with records maintained for 365 days post-delivery. Packaging must adhere to MIL-STD-2073-1, with specific requirements for domestic and overseas shipments, and physical identification must comply with MIL-STD-130, Rev N. All invoicing and receiving reports must be submitted electronically via the PIEE-WAWF system. Offerors who are not the original equipment manufacturer must identify the OEM, their CAGE code, and the specific part number being offered. The final deadline for the receipt of offers is October 30, 2026, at 4:30 PM local time.

Bare Printed Circuit Board Manufacturing

POSTED

DEADLINE

VALVE,SAFETY RELIEF

Solicitation # SPRMM126QGG52

This solicitation, issued by DLA Mechanicsburg, is a total small business set-aside for the manufacture of safety relief valves for the MK-91 MOD-3 (GMFCS) NATO. Award will be determined based on the Lowest Price Technically Acceptable (LPTA) criteria. The procurement mandates higher-level inspection and requires the finished products to meet the design specifications represented by Cage Codes 4J831 and 71905, specifically referencing drawing 2888350. All items must be physically identified per MIL-STD-130, Rev N, and packaged according to MIL-STD-2073. The contract imposes rigorous quality assurance requirements, including the submission of test procedures for government approval via DD Form 1423 prior to production. The contractor must perform a non-destructive First Article Test on one unit and conduct 100 percent production lot testing. Inspection and acceptance will occur at the origin. Administrative requirements include the electronic submission of invoices and receiving reports through PIEE-WAWF and the mandatory identification of the Original Equipment Manufacturer (OEM) and their CAGE code for any offerors acting as distributors.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

DEADLINE

Weapons System Component Supplier (Manufacturer)This subcontract involves the manufacture and supply of specialized weapons system components for prime contractors supporting DLA Weapons Support-Mechanicsburg projects. The supplier is responsible for producing hardware that adheres to strict form, fit, and function specifications to ensure seamless compatibility with existing systems. Utilizing proprietary manufacturing processes, the provider modifies commercial items to meet specific government requirements while maintaining commercial status as defined by FAR 2.101(b) and providing standard commercial warranties. Managed under the Department of Defense through the SPRMM1 DLA Mechanicsburg agency, the contract falls under NAICS code 332994. The scope of work focuses on the delivery of physical components and hardware, with a response deadline set for October 30, 2026.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS