Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Quality Inspection and Source Acceptance Services

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract with the Defense Logistics Agency involves providing on-site quality inspection and source acceptance services. The primary objective is to verify that materials and components conform to Bell drawing 97499 and all associated technical specifications. Compliance will be measured using MIL-STD-1916 or ASQ H1331 sampling standards. The contract falls under NAICS code 541330 and is managed by the Department of Defense.

General Info

DLA subcontract for on-site quality inspection of materials per Bell drawing 97499.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

541330 - Engineering Services

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE4AC26F0045.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SCREW, CLOSE TOLERAN

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJul 16

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

On-site quality inspection and source acceptance per MIL-STD-1916 or ASQ H1331 sampling standards to verify conformance with Bell drawing 97499 and technical specifications.

Similar Contracts

Same NAICS industry code

Pure Water Southern California Direct Potable Reuse Testing Facility

Solicitation # pure-water-southern-california-direct-potable-reuse-testing-facility

Kiewit Infrastructure West Co. is soliciting proposals for the Pure Water Southern California Direct Potable Reuse Testing Facility project located in California. This opportunity is specifically set aside for small businesses, including SBA certified Veteran Owned, Service-Disabled Veteran Owned, and Women-Owned Small Businesses, falling under NAICS code 541330. The solicitation was posted on October 28, 2026, with a response deadline of November 3, 2026. Interested parties should coordinate with the primary point of contact, Sepideh Sippy Aria, for further details regarding the submission process and project requirements.

Kiewit Infrastructure West Co.

POSTED

about 9 hours ago

DEADLINE

Business Impact Analysis and Update Disaster Recovery Plan Services – Inland Empire Utilities Agency

Solicitation # business-impact-analysis-update-disaster-recovery-plan-services-inland-empire-utilities-agency

Aanko Technologies Inc. is soliciting certified Disadvantaged Business Enterprise and Small Business Enterprise sub-consultants and suppliers to provide specialized professional services for the Inland Empire Utilities Agency in San Bernardino and Riverside Counties, California. The scope of work focuses on emergency management, business continuity planning, technical writing, data collection, and the updating of IT and disaster recovery plans. Relevant expertise should align with NAICS codes for administrative management, engineering services, computer systems design, and public relations. Interested parties must submit their responses by November 17, 2026. The primary point of contact for this solicitation is Liz Jordan-Wettstein. This opportunity is specifically targeted toward DBE certified firms to support critical infrastructure resilience and disaster recovery documentation within the state of California.

Aanko Technologies Inc.

POSTED

about 9 hours ago

DEADLINE

Geotechnical Analysis and Stability ModelingThis subcontract for Geotechnical Analysis and Stability Modeling involves providing professional engineering analysis for prime contractors working on Upper Thames River Conservation Authority dam projects in Canada. The scope of work focuses on reviewing structural data and seepage at armour stone retaining walls, confirming embedment depths, and updating slope stability analyses utilizing the Slope/W model. The final deliverables for this engagement include comprehensive Geotechnical Reports and updated Slope/W models. To qualify for this contract, the service provider must hold a valid P.Eng license and ensure all work complies with the Ontario Accessibility Standards and the LRIA Technical Bulletin. Interested parties must submit their responses by November 18, 2026.

Upper Thames River Conservation Authority

POSTED

about 10 hours ago

DEADLINE

R.T. Orr Dam Geotechnical Investigations

Solicitation # 2026-05

The Upper Thames River Conservation Authority is soliciting proposals for geotechnical investigations and assessments of the R.T. Orr Dam located in Stratford, Ontario. The project, which initiates in 2026 and must be substantially completed by March 15, 2027, is based on recommendations from a 2023 Dam Safety Review by D.M. Wills Associates Limited. The scope of work includes reviewing existing structural data, conducting a detailed seepage investigation at the downstream left armour stone retaining wall, performing supplementary field investigations for embankment slope stability, installing two nested monitoring wells in both earth embankments, and updating stability analyses for armour stone structures. All work must adhere to the LRIA Technical Bulletin for Geotechnical Design and Factors of Safety and meet Ontario Accessibility Standards for electronic deliverables. Proposals must be submitted electronically via the bids and tenders platform by 3:00 PM Eastern Daylight Time on November 18, 2026. The selection process utilizes a two-envelope system where technical qualifications in Envelope A are evaluated before the cost proposal in Envelope B is opened. Award decisions are based on best value, considering experience, understanding of the work, proposed methodology, schedule, and cost reasonableness. Selected consultants must provide proof of professional licensing, WSIB standing, and required insurance policies, while maintaining strict confidentiality regarding project information.

Upper Thames River Conservation Authority

POSTED

about 10 hours ago

DEADLINE

Traffic Signal Installation Oversight and Quality AssuranceThe Traffic Signal Installation Oversight and Quality Assurance subcontract involves providing technical supervision and oversight for prime contractors working on regional signal synchronization projects for the City of Aliso Viejo. The selected provider will be responsible for conducting on-site field supervision to ensure that installation contractors adhere to approved plans, specifications, and estimates, as well as Caltrans signal installation standards. Key deliverables include the performance of post-construction walkthroughs and the submission of detailed installation compliance reports and walkthrough documentation. This project is located in Aliso Viejo, California, with a response deadline set for December 2, 2026.

City of Aliso Viejo

POSTED

about 11 hours ago

DEADLINE

in about 1 month

Traffic Signal Infrastructure Design and PS&E PreparationThis subcontract opportunity involves providing professional engineering design services for regional signal synchronization projects within the City of Aliso Viejo, California. The selected contractor will support prime contractors by preparing comprehensive Plans, Specifications, and Estimates for traffic signal equipment and infrastructure improvements, while also developing technical responses and bid advertisements. A valid California Professional Engineer license is required to perform this work. The project culminates in the delivery of a complete PS&E package, with a response deadline set for December 2, 2026.

City of Aliso Viejo

POSTED

about 11 hours ago

DEADLINE

in about 1 month

Traffic Data Collection and Field Study ServicesThis subcontract for Traffic Data Collection and Field Study Services supports prime contractors on regional signal synchronization projects for the City of Aliso Viejo. The scope of work involves comprehensive traffic analysis, including seven-day 24-hour machine counts, intersection turning movement counts, and floating car studies utilizing GPS and synchronized video analysis. All operations must be conducted within Caltrans right-of-way in strict accordance with 2026 CTFP Guidelines, with final deliverables consisting of field review memos and summarized count data provided in Excel format. The project is located in Aliso Viejo, California, under NAICS code 541330. Interested parties should note that the solicitation was posted on October 28, 2026, with a response deadline set for December 2, 2026.

City of Aliso Viejo

POSTED

about 11 hours ago

DEADLINE

in about 1 month

Oso Parkway/Pacific Park Drive/Glenwood Drive Regional Traffic Signal Synchronization Project

Solicitation # 20261026016

The City of Aliso Viejo is soliciting proposals for a professional licensed consultant to provide regional traffic signal synchronization services for the Oso Parkway, Pacific Park Drive, and Glenwood Drive corridor. The project involves coordinating traffic signals across multiple jurisdictions, including the Cities of Aliso Viejo, Laguna Hills, Mission Viejo, Laguna Niguel, the County of Orange, and Caltrans, extending from Moulton Parkway to the SR-241 Northbound On-Ramp. The projected period of performance is from April 1, 2027, to September 30, 2030. The selected consultant will be responsible for providing all necessary labor, materials, and equipment to implement optimized signal timing in accordance with the Regional Traffic Signal Synchronization Master Plan and the City's Local Signal Synchronization Plan. Proposals are due by December 2, 2026, and must be submitted as one hard copy and one electronic PDF on a USB drive, with the cost proposal in a separate sealed envelope. Award decisions will be based on a weighted evaluation of the consultant's ability and skills, character and reputation, cost reasonableness, ability to meet time requirements, financial resources, and previous experience with the vendor. The contract is governed by the laws of the State of California with venue in Orange County. Key requirements include compliance with California prevailing wage laws, adherence to the City's Minority Business Enterprise program, and the submission of annual political contribution disclosures.

City of Aliso Viejo

POSTED

about 11 hours ago

DEADLINE

in about 1 month

Landscape Architecture and Public Space DesignerThis subcontract opportunity is for a Landscape Architecture and Public Space Designer to provide planning and conceptual design services for public parks on Atlanta Regional Commission projects. The selected professional will be responsible for advancing central gathering place planning to 30 percent completion, with a specific focus on integrating stormwater management and tree canopy considerations. Additionally, the scope includes the development of comprehensive placemaking strategies encompassing lighting, landscaping, wayfinding, and public art. To be eligible for this role, the contractor must hold a Professional Landscape Architect license. The primary deliverables for the engagement are a 30 percent Park Design Plan and a formal placemaking strategy document. This project is issued by the Buckhead Community Improvement District in Georgia, with a response deadline of November 13, 2026.

Buckhead Community Improvement District

POSTED

about 13 hours ago

DEADLINE

Multimodal Transportation & Mobility SpecialistThis subcontract for a Multimodal Transportation and Mobility Specialist involves analyzing and designing transportation improvements for prime contractors on Atlanta Regional Commission projects. The scope of work includes assessing roadways, transit stops, trails, and bicycle or pedestrian infrastructure to develop a prioritized list of local, state, and federal projects. Using GIS and Complete Streets design standards, the specialist will create a walkable streetscape focus area and grid prototype developed to 30 percent completion. The project is issued by the Buckhead Community Improvement District in Georgia under NAICS code 541330. The primary deliverables consist of a comprehensive transportation framework and the 30 percent design prototype. Interested parties should note the response deadline of November 13, 2026.

Buckhead Community Improvement District

POSTED

about 13 hours ago

DEADLINE

Buckhead CID Livable Centers Initiative Master Plan

Solicitation # 2026-10

The Buckhead Community Improvement District is soliciting proposals for the Buckhead Livable Centers Initiative Master Plan, a project aimed at updating the 2017 LCI plan to improve accessibility, walkability, and transit use. The scope of work focuses on the Buckhead and Lenox MARTA station areas and their connected mixed-use districts. Key deliverables include an existing conditions assessment report, a regulatory code study and audit, and the advancement of both a central gathering place/park plan and a walkable streetscape prototype to 30 percent completion. The total budget for this project is 300,000 dollars, with payments made via monthly invoices and progress reports. The project is funded through the Atlanta Regional Commission’s Livable Centers Initiative program and must adhere to federal regulations 49 CFR Part 18 and 49 CFR Part 26 regarding competitive procurement and Disadvantaged Business Enterprise participation. Additionally, the contractor must comply with the Georgia Security and Immigration Compliance Act and the Clean Air Act Amendments of 1990. The performance period begins with a notice to proceed on December 21, 2026, with a project kickoff in January 2027 and a final completion deadline of November 19, 2027. Selection will be based on the consultant's qualifications, prior experience, proposed approach, and understanding of the local Buckhead context.

Buckhead Community Improvement District

POSTED

about 13 hours ago

DEADLINE

Wastewater System Engineering ConsultantThe Wastewater System Engineering Consultant subcontract involves providing technical analysis and preliminary design services for prime contractors working on sewerage system projects for the City of Alamo. The selected consultant will be responsible for analyzing existing system capacity and conditions, developing design alternatives, and calculating flow rates in strict accordance with state environmental standards and Georgia Department of Community Affairs guidelines. Key technical requirements include the use of GIS mapping tools and hydraulic modeling software to produce design calculations, technical data, and draft sections of the Preliminary Engineering Report. Qualified candidates must hold a valid Georgia Professional Engineer license to perform this work. This opportunity was posted on October 28, 2026, with a response deadline of November 30, 2026. The project falls under NAICS code 541330 and is focused on ensuring the city's wastewater infrastructure meets all necessary regulatory and performance benchmarks.

POSTED

about 14 hours ago

DEADLINE

in about 1 month

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

MIL-STD Packaging and Logistics ServicesThis subcontract for MIL-STD Packaging and Logistics Services supports prime contractors fulfilling Defense Logistics Agency supply contracts. The scope of work involves providing specialized military-grade packaging and palletization services, ensuring all items are processed according to MIL-STD-129, RP001, and ASTM D3951 standards. The provider must utilize compliant labeling and industrial equipment to deliver shipments that are fully prepared for FOB Origin transport. The project is managed under NAICS code 561910 for the Department of Defense and will be performed in Phoenix, Arizona. Interested parties should note the response deadline of November 9, 2026, for this specific logistics requirement.

Packaging and Labeling Services

POSTED

about 14 hours ago

DEADLINE

Safety Cone Supplier (NSN 6250-00-334-6183)This subcontract involves the procurement of 589 safety cones to support prime contractors fulfilling Defense Logistics Agency supply contracts. The supplier is responsible for manufacturing or sourcing cones identified by NSN 6250-00-334-6183, ensuring all materials strictly adhere to the DLA Master List of Technical/Quality requirements and comply with the Buy American Act. The completed order of 589 safety cones must be delivered FOB Origin to Phoenix, Arizona. This requirement falls under NAICS code 339999 and is managed by the Department of Defense for the Defense Logistics Agency.

All Other Miscellaneous Manufacturing

POSTED

about 14 hours ago

DEADLINE

Supply of Toggle Switches (NSN 5930-00-655-1507)This subcontract involves the supply of 11 toggle switches for prime contractors supporting Defense Logistics Agency contracts. The switches must strictly adhere to NSN 5930-00-655-1507 specifications, with a specific prohibition against the use of additive manufacturing. All items must be delivered FOB Destination and must comply with packaging and marking standards established by MIL-DTL-28786, MIL-STD-129, and RP001. The contractor is required to maintain rigorous cybersecurity and data protection standards, specifically ensuring compliance with NIST SP 800-171 and DFARS 252.204-7012. This procurement falls under NAICS code 334419 and is managed through the Department of Defense.

Other Electronic Component Manufacturing

POSTED

about 14 hours ago

DEADLINE

Domestic Electrical Component Supply (Berry Amendment Compliant)This subcontract involves the supply of raw wire, connectors, shielding, and housing for prime contractors working on Defense Logistics Agency procurement projects specifically for NSN 5995-01-696-1261. The provider is responsible for sourcing electrical grade materials that meet strict technical requirements and must include a Certificate of Conformance with all delivered components. A critical requirement of this agreement is the provision of certification of origin to ensure full compliance with the Buy American Act and the Berry Amendment. Managed under NAICS code 335131 for the Department of Defense, the contract ensures that all domestic electrical components meet the necessary federal standards for military application.

Residential Electric Lighting Fixture Manufacturing

POSTED

about 14 hours ago

DEADLINE

Special Purpose Electrical Cable Assembly FabricationThis subcontract involves the fabrication and assembly of a special purpose electrical cable assembly, specifically NSN 5995-01-696-1261, for prime contractors working on Defense Logistics Agency procurement projects. The manufacturer is required to produce one completed, tested, and packaged assembly in strict accordance with the DLA Master List of Technical and Quality Requirements (RA001), with a specific prohibition against the use of additive manufacturing. All deliverables must be packaged and marked according to MIL-STD-129 and MIL-STD-2073-1E standards. This opportunity falls under NAICS code 335931 and is managed by the Department of Defense. Interested parties must respond by November 5, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

about 14 hours ago

DEADLINE

Supplier of Flat Washers (NSN 5310-01-097-9936)This subcontract involves the procurement of 109 specialized flat washers to support Defense Logistics Agency aircraft component projects. The supplier is responsible for manufacturing or sourcing the components in strict accordance with Sikorsky Aircraft Corporation part number SS5104-01 and NSN 5310-01-097-9936. All items must be delivered to DLA Distribution DDSP New Cumberland. The contract mandates rigorous adherence to quality and regulatory standards, including compliance with the Buy American Act and the Berry Amendment. Packaging must meet ASTM D3951 specifications, while marking and palletization must follow MIL-STD-129 and RP001 guidelines. The opportunity falls under NAICS code 332722 and is managed by the Department of Defense.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 14 hours ago

DEADLINE

Military-Spec Packaging and International Shipping (Guam)This subcontract through the Defense Logistics Agency involves specialized military packaging, marking, and international transportation services for prime contractors delivering supplies to Guam. The scope of work specifically requires the packaging of mufflers in accordance with ASTM D3951, marking per MIL-STD-129, and palletization following RP001 requirements. The selected provider must utilize the fastest traceable shipping methods to ensure delivery to the MESG One Detachment in Guam. This opportunity falls under NAICS code 488330 and is managed by the Department of Defense.

Navigational Services to Shipping

POSTED

about 14 hours ago

DEADLINE

Exhaust Muffler Supply (NSN 2990-01-566-4579)This subcontract involves the manufacture or procurement of one specialized exhaust muffler, identified by NSN 2990-01-566-4579, to support prime contractors fulfilling Defense Logistics Agency supply contracts. The provider must ensure the product complies with DLA Master List of Technical and Quality Requirements RA001 and RQ011, while maintaining strict supply chain traceability documentation as specified in the contract terms. Managed under NAICS code 336390 for the Department of Defense, the agreement requires the delivery of a single completed unit. The solicitation was posted on October 28, 2026, with a response deadline set for November 4, 2026.

Other Motor Vehicle Parts Manufacturing

POSTED

about 14 hours ago

DEADLINE

Supply of Enamel (NSN 8010-00-297-0554)This subcontract involves the supply of 5,000 gallons of enamel paint to prime contractors supporting Defense Logistics Agency Troop Support contracts. The material must strictly adhere to NSN 8010002970554 and UFGS-09900 Division 09 specifications, while remaining compliant with the DLA Master List of Technical and Quality Requirements. Delivery is designated as FOB Destination, with the place of performance located at Hunter AAF. The contractor is responsible for ensuring all packaging and labeling meet MIL-STD-129 and MIL-STD-2073-1E standards, specifically including the provision of lot and batch numbers. This procurement falls under NAICS code 325510 and is managed by the Department of Defense. The response deadline for this requirement is November 3, 2026.

Paint and Coating Manufacturing

POSTED

about 14 hours ago

DEADLINE

Supply of Sleeve Spacers (NSN 5365-01-566-4847)This subcontract involves the manufacture or sourcing of four sleeve spacer units, identified by NSN 5365-01-566-4847, to support prime contractors under a Defense Logistics Agency supply contract. The selected provider must ensure all materials comply with the Buy American Act and the Berry Amendment. Final delivery of the units is required at Fort Bragg, North Carolina. Strict adherence to technical specifications is mandatory, including packaging according to ASTM D3951, labeling per MIL-STD-129, and palletization following RP001 standards. The opportunity falls under NAICS code 332721 and is managed through the Department of Defense.

Precision Turned Product Manufacturing

POSTED

about 14 hours ago

DEADLINE

Mold Release Agent Supplier (NSN 8030-01-233-1265)This subcontract involves the supply of a specific mold release agent, identified by NSN 8030-01-233-1265, to support prime contractors fulfilling Defense Logistics Agency requirements. The supplier must provide one 5-gallon can delivered FOB Destination to Illinois and US APO AE. To ensure product integrity, the agent must maintain a 12-month shelf life and be stored at temperatures between 60 and 80 degrees Fahrenheit. The contractor is required to adhere to strict regulatory and military standards, including compliance with the Buy American Act, the Berry Amendment, and 29 CFR 1910.1200. Additionally, all shipments must be packaged and marked in accordance with MIL-STD-2073-1E and MIL-STD-129. This procurement falls under NAICS code 325998 and is managed through the Department of Defense.

All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

about 14 hours ago

DEADLINE

Supply of Refractory Castable Mix (NSN 9350015694317)This subcontract involves the supply of refractory castable mix to prime contractors supporting Defense Logistics Agency contracts for the USS George H W Bush and USS Abraham Lincoln. The provider is responsible for manufacturing or sourcing material that meets NSN 9350015694317, with strict requirements for packaging according to MIL-STD-2073-1E and marking per MIL-STD-129. The agreement mandates full compliance with the Buy American Act and the Hazard Communication Standard. The scope of work requires the delivery of two units of castable mix on a FOB Destination basis. This procurement falls under NAICS code 327120 and is managed through the Department of Defense. Interested parties must adhere to the response deadline of November 9, 2026.

Clay Building Material and Refractories Manufacturing

POSTED

about 14 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Quality Inspection and Compliance Testing

POSTED

CLOSED

Quality Inspection & Zero-Defect Sampling Services

ASC COMMODITIES DIVISION

POSTED

CLOSED

Capability Assessment and Technical Compliance Support

Defense Logistics Agency

POSTED

DEADLINE

Quality Assurance and Inspection Services

Defense Logistics Agency

POSTED

DEADLINE

Technical Data and Drawing Compliance Services

Defense Logistics Agency

POSTED

DEADLINE

Quality Inspection and Acceptance Testing at Destination

ASC SUPPLIER OPER OEM DIVISION

POSTED

CLOSED

Quality Inspection & First Article Testing (FAI)

Defense Logistics Agency

POSTED

DEADLINE

Inspection and Acceptance Support at Origin

Defense Logistics Agency

POSTED

DEADLINE

Quality Assurance and Inspection Services

ASC COMMODITIES DIVISION

POSTED

CLOSED

Quality Inspection and Testing Services

ASC SUPPLIER OPER AE AND AF DIV

POSTED

CLOSED

Technical Data Package (TDP) Preparation & Documentation

ACTIVE DEVICES DIVISION

POSTED

CLOSED

Technical Data and Alternate Part Qualification

NUCLEAR REACTOR PROGRAM

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS