This Solicitation opportunity from Department Of Defense was posted on July 16, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
RACEWAY, NONMETALLIC
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
The contract is for the procurement of nonmetallic raceway under solicitation SPE4A7-26-T-577W, issued by the Department of Defense’s DLA Aviation, ASC Supplier Oper AE and AF Division, with a delivery requirement of 128 linear gallons, each equal to six feet, totaling 768 feet of product. The item is identified by NSN 5975-01-431-3657, with a delivery period of 168 days after contract award and a destination of the DLA Distribution New Cumberland Facility in Pennsylvania. All supplies must comply with DLA’s packaging requirements as outlined in RP001, adhering to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including mandatory barcoding for logistics tracking. Preservative methods are not required, and no special marking codes apply. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced through identifiers R and I, and quality control inspection must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required in sample lots unless otherwise specified. Attributes are to be classified as critical, major, or minor with corresponding verification levels and AQLs of VII/0.1, IV/1.0, and II/4.0 respectively. The contract mandates strict compliance with federal acquisition regulations and DFARS clauses, including the requirement to safeguard covered defense information per NIST SP 800-171 and basic safeguarding standards under deviation 2026-00038, as well as prohibitions on hexavalent chromium, toxic hazardous materials, and procurement from Communist Chinese military companies. Subcontracts for commercial products are subject to deviation-specific clauses, and contractors must submit electronic payment requests and receiving reports exclusively through WAWF. Hazardous materials delivered under the contract require full hazard communication labeling in accordance with OSHA regulations and must be accompanied by Material Safety Data Sheets prior to award. The seller, PANDUIT CORP, must ensure compliance with all marking and identification standards, including government labeling, and adhere to the requirement that non-accepted supplies be stripped of government identification. The solicitation is set aside without a specific socioeconomic preference, and while the contract type is unspecified, it is expected to be a firm-fixed-price arrangement. Electronic submission via DIBBS
General Info
Agency
NAICS
Place of Performance
2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USASet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
RACEWAY,NONMETALLIC
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
U/I LG = 00000000006FT
PANDUIT CORP
1 LG = 6 FT
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
TECH DATA AVAILABILITY
"DLA does not have a bidset available"
SAMPLING ADEQUATE DATA FOR THE NSN/Part Number: 5975-01-431-3657 Quantity: 128 LG Purchase Request: 7017529190QTY: 128 Delivery: 168 days ADO
More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Same awarding agency
