Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Radiation Shielding & Structural Modifications

Active

State & Local

Response Deadline08/31/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the installation of comprehensive radiation shielding systems to support the safe operation of LINAC equipment, involving the use of lead-lined walls, barium plaster, and reinforced concrete barriers to ensure compliance with radiation safety standards. Structural modifications are required to provide adequate load-bearing capacity and stability for the heavy medical equipment, including reinforcement of floors and load-bearing walls to accommodate the weight and operational demands of the LINAC setup. The work must be executed in accordance with industry best practices for radiation containment and building integrity, with all materials and methods meeting applicable safety and regulatory requirements. The subcontract is issued by Harris County in Texas under NAICS code 238310 for specialized construction services. The opportunity was posted on July 24, 2026, with a response deadline of August 31, 2026, at 7:00 PM. Performance location details are not specified but are expected to occur within Harris County. No set-aside classification or point of contact information is provided. Contractors must be prepared to deliver high-precision shielding and structural integration work with full attention to safety, technical accuracy, and adherence to project specifications.

General Info

Install radiation shielding with lead, barium plaster, and reinforced concrete for LINAC equipment in Harris County.

Agency

Texas → Harris CountyView Agency

NAICS

238310 - Drywall and Insulation ContractorsView NAICS

Place of Performance

TX, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 24

subcontract

Response DeadlineAug 31

Submission deadline

Response Deadline

08/31/2026, 07:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyTexas → Harris County

ContactsNo contacts available

OfficeN/A

Organization / Agency

Texas → Harris County

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Installation of radiation shielding using lead-lined walls, barium plaster, and concrete barriers, along with structural reinforcement to support LINAC equipment.

Similar Contracts

Same NAICS industry code

Chain-Link Fence Preservation/RemovalThe contract involves the careful removal or preservation of existing chain-link fences located near areas designated for demolition, requiring precise work to avoid damage to surrounding infrastructure or property. All activities must be conducted with strict adherence to safety protocols, and any fences that are removed must be handled in a manner that ensures safe transport and disposal or storage. Comprehensive documentation is required for every step of the process, including pre-removal conditions, methods used, and final disposition of materials, ensuring full accountability and compliance with project specifications. This subcontract, classified under NAICS code 238310 for site preparation and related services, is issued by the City of Beaumont in Texas and is open for response until August 14, 2026. The scope emphasizes precision and care, making it suitable for contractors with experience in sensitive site work near demolition zones. The contract does not specify a set-aside status or point of contact, and performance is expected to occur within the City of Beaumont without further geographic detail provided. Interested parties must review the full solicitation through the provided online portal to understand all requirements, expectations, and submission procedures.

City Of Beaumont

POSTED

DEADLINE

Drywall, Framing, and Interior Partition InstallationThe contract pertains to the installation of metal and wood studs, drywall, taping, mudding, and finishing for reconfigured office spaces within Building 5000 at Scott Air Force Base, with a NAICS code of 238310 for interior construction work. This is a subcontract issued under a Total Small Business Set-Aside, meaning only small businesses are eligible to bid, and it is managed by the Department of Defense through the W7M6 Uspfo Activity Ilang 126. The opportunity was posted on July 24, 2026, with a firm response deadline of August 14, 2026, at 6:00 p.m. All work must be performed at the specified location in Scott Air Force Base, zip code 62225, and the project involves interior partitioning and finishing to meet new office layout requirements, requiring skilled labor in framing and drywall systems.

W7M6 Uspfo Activity Ilang 126

POSTED

DEADLINE

Interior Renovation and Architectural FinishesThe contract titled Interior Renovation and Architectural Finishes entails the complete demolition of existing interior structures, followed by extensive reconfiguration of interior spaces to meet modern functional and accessibility requirements. Work includes the installation of wall systems, ceiling grids, doors, hardware, and backlit signage, all of which must comply with ADA guidelines and local municipal building codes. The scope demands precision in material selection and craftsmanship to ensure seamless integration with existing architectural elements while maintaining regulatory compliance. All work must be executed to support usability, safety, and aesthetic standards expected in publicly accessible environments. This is a subcontract opportunity posted by the state of Utah with a response deadline of August 5, 2026, at 4:00 PM. The North American Industry Classification System code 238310 indicates the nature of the work falls under building finishing contractors, targeting skilled firms experienced in interior finish trades. The opportunity is accessible through the Utah BonfireHub platform, and while no specific location, point of contact, or set-aside designation is provided, bidders are expected to demonstrate capacity to fulfill the full scope under state and federal accessibility mandates. Participation requires submission before the deadline to be considered for award.

POSTED

DEADLINE

PULLEY, GROOVEThe contract is for the procurement of three groove pulleys identified by NSN 3020-20-013-5998 and part number 9885-1 1/4 from 3M Canada Company, under solicitation SPE7L5-26-T-4602. Delivery is required within 168 days of contract award, with FOB origin terms and no tolerance for quantity variance. Inspection and acceptance occur at the destination facility in Barstow, California, and all items must be packaged in compliance with DLA’s packaging requirements, including MIL-STD-129 labeling and ASTM D3951 for non-hazardous materials, unless otherwise superseded by DLA’s Master List of Technical and Quality Requirements. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval. The unit of issue is each, with a total contract value of $9.00. All packaging and palletization must follow RP001 guidelines, and hazardous material handling must comply with TQ requirement IP025 if applicable. The required delivery date was originally November 1, 2026, with a needed ship date of January 19, 2027, and the contract remains active under the Department of Defense’s Land Supplier Operations Engines.

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Drywall, Painting, and Interior FinishesThe contract involves the installation and finishing of drywall along with all associated interior finishes, including taping, mudding, texturing, painting, trim, and baseboards for renovated rooms. The work is part of a total small business set-aside under the SBA program, exclusively available to small businesses as defined by the FAR 19.5 regulations, with the NAICS code 238310 classifying the scope as interior finish contracting. Performance of the work is required at a location in Columbus, Mississippi, with a zip code of 39710. The solicitation was posted on July 23, 2026, and all proposals must be submitted by August 24, 2026, at 7:00 PM Eastern Time. This is structured as a subcontract under the Department of Defense, specifically managed by the FA3022 14 Cons Lgca office, and it seeks qualified small business contractors to deliver comprehensive interior finish services across designated renovated areas. There is no specified point of contact listed publicly, and further details should be accessed through the official SAM.gov portal link provided for this opportunity.

FA3022 14 Cons Lgca

POSTED

DEADLINE

Spray Foam Insulation The contractor is required to furnish all supervision, labor, materials, and equipment necessary to perform surface preparation and apply spray foam insulation to the interior metal walls and ceiling of the Bldg. 9 Mezzanine. This work falls under NAICS code 238310 and is being procured as a total small business set-aside, meaning only small businesses are eligible to compete. The solicitation is issued under number N0016726Q1133 by the Naval Surface Warfare Center Carderock, part of the Department of Defense, with the office located in Bethesda, Maryland. Proposals must be submitted by August 6, 2026, at 5:00 p.m. EST, and the contract will be performed at the same location. Point of contact for questions and submissions is Michael Rossik, with Tanika Banks as the secondary contact, both reachable through their official Navy email addresses and phone number provided. The opportunity is listed on SAM.gov and must be accessed through the provided UI link for full solicitation details.

POSTED

DEADLINE

Interior Finishes – Drop Ceilings and PaintingThe contract encompasses the installation of drop ceilings with integrated insulation, along with interior and exterior painting services, all designed to harmonize with the existing architectural character of campus buildings. Work must comply with aesthetic and functional standards that align with the current building finishes, ensuring a cohesive visual and environmental experience across the facility. The project falls under NAICS code 238310 for specialized trade contractors and is classified as a subcontract, indicating it is part of a larger construction or renovation initiative managed by the Mississippi Department of Military. Bids are due by August 27, 2026, with the solicitation posted on July 22, 2026, allowing potential contractors approximately five weeks to prepare and submit proposals. The place of performance and contact details are not specified, but the work is tied to state-owned campus facilities under the Mississippi Department of Military’s jurisdiction. All painting and ceiling installations must meet quality specifications consistent with existing structures, and any materials or methods used must be approved to ensure uniformity with the campus’s established design language.

MS DEPT of MILITARY

POSTED

DEADLINE

in about 1 month

Wall Surface Refinishing

MS DEPT of MILITARY

POSTED

DEADLINE

in about 1 month

L1662-C4 RESIDENTIAL SOUND INSULATION PROGRAM, EAST BOSTON, MAThe contract concerns a residential sound insulation program in East Boston, Massachusetts, targeting 28 homes to receive FAA grant funding for comprehensive noise reduction upgrades. Work includes replacing existing windows and doors with acoustically rated products, installing HVAC systems with associated ductwork, upgrading electrical systems, and completing interior finishes such as sheetrock, painting, and final detailing. The base contract value is $5,461,411, with four optional alternates adding up to an estimated total potential value of $6,546,500. Each alternate corresponds to additional scope components under HVAC, electrical, and painting categories, offering flexibility in execution but requiring strict adherence to bid submission protocols. The procurement is managed by the Massachusetts Port Authority’s Capital Programs office under a solicitation issued on July 22, 2026, with a bid deadline of August 26, 2026. All submissions must be made electronically through the BidExpress portal; paper bids are not accepted, and sub-bids from specialty contractors are due one week before the general bid deadline. Special requirements include a 5% bid bond, 100% performance and payment bonds issued by a surety approved by the Authority, and mandatory Buy American Act compliance for all materials used in this AIP-funded project. Contractors must carry liability insurance with a minimum combined single limit of $2,000,000 and name the Massachusetts Port Authority as an additional insured. Compliance with Massachusetts wage laws, Executive Order 11246, Title VI of the Civil Rights Act, and non-discrimination policies is required, and contractors with 50 or more employees and subcontracts over $50,000 must develop a written affirmative action program within 120 days of contract start. Submission of SF-100 reports is mandatory for qualifying contractors and subcontractors within 30 days of award if no report was filed in the prior year. Only firms holding a current Certificate of Eligibility in General Building Construction from the Division of Capital Asset Management may bid, and a non-segregated facilities certification must be submitted prior to award. There is no formal FAR clause structure, contract type specification, or detailed evaluation factors publicized, suggesting a price-focused procurement likely under a lowest price technically acceptable methodology, with final acceptance and oversight resting with the contracting authority located at One Harborside Drive, Boston, MA.

CAPPROG - Capital Programs

POSTED

DEADLINE

in about 1 month

Air sealing and re-insulation of building attics.The project involves air sealing and re-insulation of building attics, air sealing of basements, and the installation of frost skirt insulation at the exteriors of buildings, all aimed at improving energy efficiency and structural integrity. All bids must be submitted electronically through Projectdog.com by the deadline of August 19, 2026, at 7:00 PM, and only bidders certified by the District of Columbia Agency for Contract Management and Procurement (DCAMM) are eligible to participate. Bidders are required to commit to contracting with certified minority business enterprises and women business enterprises as recognized by the Supplier Diversity Office. The solicitation, designated as BD-17-1871-HA329-HA329-131456, was posted on July 22, 2026, and is managed by the Westfield Housing Authority in Worcester, Massachusetts, with the place of performance located at Plantation Street, Worcester, MA 01605. Primary point of contact for the solicitation is Hugh Mackay, Purchaser, and all relevant information can be accessed via the official Commbuys portal.

HA329 - Westfield Housing Authority

POSTED

DEADLINE

Office Partitioning and Drywall InstallationThe contract calls for the construction of two drywall partitions to create a new office space within an existing laboratory facility, requiring full interior wall construction including framing, installation of drywall, taping, mudding, sanding, and finishing to ensure seamless integration with the surrounding conditions. All work must comply with existing architectural and aesthetic standards to maintain consistency across the lab environment, and the scope encompasses all labor and materials necessary to complete the partitions to a professional finish. This is a total small business set-aside under NAICS code 238310, classified as a subcontract opportunity posted on July 22, 2026, with a response deadline of August 20, 2026. The contracting agency is the Department of Agriculture under the Ppq Carolina Puerto Rico office, and performance is required at a location in Carolina with a zip code of 00979. The opportunity is exclusively reserved for small businesses as defined by the SBA, and interested parties must submit proposals prior to the stated deadline through the official SAM.gov portal.

Ppq Carolina Puerto Rico

POSTED

DEADLINE

Interior Finishes & Drywall (Level 5 Finish)

W072 Endist Louisville

POSTED

DEADLINE

More opportunities from Texas → Harris County

Same awarding agency

Lobbying Disclosure ServicesThe contract requires the provision of lobbying disclosure services to ensure compliance with federal regulations when the contract value surpasses $100,000. Specifically, it mandates the preparation and timely filing of the Federal Standard Form LLL to accurately report any lobbying activities associated with the contract. The solicitation is classified as a subcontract under NAICS code 541110, which pertains to architectural, engineering, and related services, and is posted by Harris County in Texas. Interested parties must submit responses by the deadline of August 17, 2026, at 7:00 PM ET, with no set-aside provisions specified. The opportunity is accessible through the Harris County Bonfire Hub portal, and while no point of contact or detailed office address is provided, the performance location remains unspecified within Texas.

Offices of Lawyers

POSTED

DEADLINE

Israel Boycott Compliance CertificationThe contract requires legal certification that the contractor does not participate in any boycott of Israel, as mandated by Texas Government Code Section 2270.002, and includes ongoing monitoring to ensure continued compliance with this requirement. This is a subcontract under Naics Code 541110, issued by Harris County in Texas, and the certification must be provided by the proposed contractor to affirm their adherence to state law prohibiting participation in boycotts of Israel. The contractor is expected to maintain compliance throughout the duration of the agreement and may be subject to verification or audit to confirm that no actions are taken that support or participate in such boycotts. The solicitation was posted on July 24, 2026, with a response deadline of August 17, 2026, and all submissions must be made through the designated online portal.

Offices of Lawyers

POSTED

DEADLINE

Insurance and Bonding Compliance SupportThe contract requires the provider to deliver insurance certificates that meet Harris County’s compliance standards, including a waiver of subrogation in favor of the county, ensuring that third-party insurers cannot seek reimbursement from Harris County for claims covered under the policy. The provider must also offer support for any bonding requirements necessary to guarantee the performance of the associated contract, ensuring all financial and legal safeguards are in place as mandated by the county. All documentation and services must be completed accurately and in a timely manner to fulfill contractual obligations. This opportunity is classified as a subcontract under NAICS code 524292 and is posted by Harris County in Texas, with submissions due by August 17, 2026. The provider is expected to operate in alignment with Harris County’s procurement and risk management protocols, without specifying a physical location for performance. There is no set-aside designation for small businesses or other categories, and responses must be submitted through the designated online portal by the stated deadline to be considered.

Pharmacy Benefit Management and Other Third Party Administration of Insurance and Pension Funds

POSTED

DEADLINE

Stormwater Pollution Prevention Plan (SWPPP) DevelopmentThe contract requires the development, implementation, and ongoing maintenance of a Stormwater Pollution Prevention Plan tailored to comply with environmental regulations set by the state of Texas and Harris County. The plan must be designed to ensure that all site operations during construction or activity phases minimize the risk of pollutants entering stormwater systems, thereby protecting local waterways and meeting regulatory obligations. The scope demands technical expertise in environmental planning and compliance, with a focus on practical measures that can be sustained throughout the project lifecycle. The solicitation is classified as a subcontract under NAICS code 541620, indicating it falls within environmental consulting services. The response deadline is set for August 17, 2026, with the opportunity posted on July 24, 2026. While the agency name listed is Harris County and the associated state is Texas, specific location details for performance or contact points are not provided. The contract is accessible via a public portal, and although there is no set-aside designation, interested parties must submit proposals by the stated deadline to be considered for award.

Environmental Consulting Services

POSTED

DEADLINE

Hazardous Materials Handling and SDS ManagementThe contract requires comprehensive management of hazardous materials through the supply of up-to-date Safety Data Sheets and the accurate labeling of all hazardous chemical containers in compliance with OSHA’s Hazard Communication Standard. It mandates strict adherence to protocols for the safe handling, storage, and disposal of hazardous substances on-site to ensure worker safety and regulatory compliance. All activities must align with industry best practices and federal requirements to minimize risks associated with chemical exposure and improper containment. This subcontract is issued by Harris County under NAICS code 541620 and is open for responses until August 17, 2026. The work will be performed at an unspecified location within Texas, with no set-aside provisions or specific organization type requirements identified. Interested parties must submit proposals through the provided online portal prior to the deadline, ensuring timely delivery of services critical to maintaining a compliant and secure work environment.

Environmental Consulting Services

POSTED

DEADLINE

Safety Compliance and OSHA Documentation ServicesThe contract requires the provision of comprehensive OSHA compliance services, including the accurate maintenance and submission of OSHA 300 and 300A logs, completion of detailed safety record questionnaires, and the execution of daily worksite safety inspections to ensure ongoing regulatory adherence. The goal is to maintain a robust safety program that prevents the contractor from being listed under OSHA’s Severe Violator Enforcement Program by proactively identifying and mitigating hazards. All activities must align strictly with OSHA standards to uphold workplace safety and avoid enforcement actions or penalties. The work is structured as a subcontract under Harris County’s procurement process, with a response deadline of August 17, 2026, and is categorized under NAICS code 541611 for management, scientific, and technical consulting services. Performance will be expected across all worksites under the county’s jurisdiction, though specific locations are not defined in the available data.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Supplier of Fastener-Related Hardware and ComponentsHarris County is seeking suppliers to provide ancillary hardware components that work in conjunction with screw fasteners, including anchors, rivets, threaded inserts, drive tools, and fastening systems. This subcontract opportunity is open to qualified vendors who can deliver these critical fastening elements to support infrastructure and construction projects within the county. The solicitation was posted on July 24, 2026, with responses due by August 24, 2026, at 7:00 PM. The contract falls under NAICS code 332215, which pertains to screw, bolt, and nut manufacturing, indicating the technical nature of the required hardware. While no specific place of performance or point of contact is listed, the work is expected to support operations in Texas. Interested parties must submit responses through the designated online portal before the deadline to be considered.

Metal Kitchen Cookware, Utensil, Cutlery, and Flatware (except Precious) Manufacturing

POSTED

DEADLINE

Packaging, Labeling, and Just-in-Time Delivery ServicesHarris County is seeking a subcontractor to provide comprehensive packaging, labeling, and just-in-time delivery services for fasteners across its facilities. The scope includes kitting, barcoding, and scheduled distribution of components, with potential vendor-managed inventory support to ensure continuous availability and reduce stockouts. Services must align with operational needs through precise logistics coordination, accurate labeling, and timely deliveries to multiple county locations. The contract is set to be awarded following a solicitation process with proposals due by August 24, 2026, and the work will fall under NAICS code 493190, which covers other warehousing and storage activities. Responses are to be submitted via the designated online platform, and the contract will be managed under the jurisdiction of Harris County, Texas, with no specific set-aside provisions indicated.

Other Warehousing and Storage

POSTED

DEADLINE

Supply of Specialty or High-Strength FastenersHarris County is seeking suppliers to provide specialty fasteners including high-tensile, stainless steel, corrosion-resistant, and custom-threaded components for use in infrastructure and public works projects. The opportunity is structured as a subcontract with a response deadline of August 24, 2026, and was posted on July 24, 2026, with no solicitation number assigned. The North American Industry Classification System code 332311 applies, indicating the focus is on forging and stamping operations related to fastener manufacturing. The place of performance and detailed office address are not specified, suggesting the work may be required across various county locations or projects. There is no set-aside designation indicated, meaning the contract is open to all qualified vendors without preference given to small businesses or other categories. Interested parties must submit responses through the designated online portal by the stated deadline.

Prefabricated Metal Building and Component Manufacturing

POSTED

DEADLINE

Supply of Standard Screw Fasteners (e.g., Bolts, Nuts, Washers)Harris County is seeking suppliers to provide a wide range of standard industrial screw fasteners including machine screws, bolts, nuts, washers, and threaded rods in both metric and imperial sizes for general county operations. The contract is structured as a subcontract with a solicitation response deadline of August 24, 2026, and was posted on July 24, 2026. The procurement falls under NAICS code 332312, which classifies it within the screw, nut, and bolt manufacturing sector. All items must meet industry standards for quality and compatibility to support diverse maintenance and construction needs across county facilities. Deliveries are expected to be made to various county locations within Texas, with no specific point of contact provided. Bidders must ensure compliance with required specifications and be prepared to fulfill ongoing supply demands as needed by county departments. The opportunity is not subject to any set-aside provisions and is open to qualified vendors through the BonfireHub portal.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Medical Gas System InstallationHarris County is seeking qualified contractors to install or modify medical gas piping systems within the oncology suite to ensure reliable delivery of oxygen, vacuum, and nitrous oxide essential for patient care. The work must comply with all relevant safety and healthcare standards to support critical clinical operations, with performance expected to occur at the designated facility in Texas. This subcontract opportunity, categorized under NAICS code 238220 for plumbing, heating, and air-conditioning contractors, requires proposals to be submitted by August 31, 2026, with the solicitation posted on July 24, 2026. Bidders must have proven experience in medical gas system installations and be prepared to meet stringent operational, regulatory, and timing requirements to avoid disruptions to patient services. All work must be completed in coordination with existing clinical workflows and facility protocols.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

in about 1 month

Mechanical, Electrical, and Plumbing (MEP) UpgradesThe contract involves comprehensive mechanical, electrical, and plumbing upgrades focused on supporting high-power linear accelerator operations, including electrical service enhancements to accommodate increased power demands, HVAC system improvements to maintain precise environmental control critical for sensitive medical equipment, and potential plumbing integration for medical gas systems where applicable. These upgrades are essential to ensure operational safety, regulatory compliance, and system reliability within a healthcare or research facility environment. The work is classified under NAICS code 238210 for electrical contracting and is structured as a subcontract opportunity managed by Harris County in Texas. The solicitation was posted on July 24, 2026, with a response deadline of August 31, 2026, at 7:00 PM local time. All performance is expected to occur within the jurisdiction of Harris County, though specific location details are not provided in the data.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

in about 1 month