Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Supply of Standard Screw Fasteners (e.g., Bolts, Nuts, Washers)

Active

State & Local

Response Deadline08/24/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Harris County is seeking suppliers to provide a wide range of standard industrial screw fasteners including machine screws, bolts, nuts, washers, and threaded rods in both metric and imperial sizes for general county operations. The contract is structured as a subcontract with a solicitation response deadline of August 24, 2026, and was posted on July 24, 2026. The procurement falls under NAICS code 332312, which classifies it within the screw, nut, and bolt manufacturing sector. All items must meet industry standards for quality and compatibility to support diverse maintenance and construction needs across county facilities. Deliveries are expected to be made to various county locations within Texas, with no specific point of contact provided. Bidders must ensure compliance with required specifications and be prepared to fulfill ongoing supply demands as needed by county departments. The opportunity is not subject to any set-aside provisions and is open to qualified vendors through the BonfireHub portal.

General Info

Harris County seeks suppliers for industrial screw fasteners in metric and imperial sizes, due August 24, 2026, via BonfireHub.

Agency

Texas → Harris CountyView Agency

NAICS

332312 - Fabricated Structural Metal ManufacturingView NAICS

Place of Performance

TX, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 24

subcontract

Response DeadlineAug 24

Submission deadline

Response Deadline

08/24/2026, 07:00:00 PM UTCin 30 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyTexas → Harris County

ContactsNo contacts available

OfficeN/A

Organization / Agency

Texas → Harris County

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Procurement and delivery of standard industrial screw fasteners including machine screws, bolts, nuts, washers, and threaded rods in both metric and imperial sizes for general county use.

Similar Contracts

Same NAICS industry code

Structural Steel Fabrication and ErectionThe contract calls for the fabrication and on-site assembly of a structural steel framework for a building project under the jurisdiction of San Diego County, California. Performance of all work is required to occur locally in San Diego, with no specified alternative locations, ensuring that steel components are manufactured and erected according to site-specific engineering and safety requirements. The naics code 332312 indicates this is a specialized subcontract focused on structural steel fabrication and erection, distinguishing it from general contracting or other construction services. The solicitation was posted on July 24, 2026, with a firm response deadline of August 1, 2026, at 1:00 AM, leaving a narrow window for interested parties to submit proposals. As a subcontract, this engagement is likely part of a larger construction initiative managed by a prime contractor or public entity, with the winning bidder responsible for delivering precise steel components and their secure, compliant installation. All work must meet applicable technical, quality, and scheduling standards expected by San Diego County, though specific performance metrics or compliance requirements are not detailed in the provided data.

San Diego County

POSTED

DEADLINE

Pre-Engineered Metal Building Supply and ErectionThe contract involves the supply, delivery, and structural erection of a pre-engineered metal building ranging from 3,000 to 5,600 square feet, with integrated climate control systems to ensure environmental regulation within the structure. The scope requires compliance with engineering standards for load capacity, weather resilience, and energy efficiency, with all components manufactured and assembled to meet specified performance benchmarks. The project demands precise coordination for on-site assembly, including foundation preparation, crane operations, and connection of climate control infrastructure to existing utilities or designated power sources. This is a subcontract opportunity posted by the Vermont Office of the Department of Economic Development, with a response deadline of September 1, 2026. Bidders must demonstrate experience in metal building fabrication, structural installation, and climate system integration, along with the ability to meet strict timelines and quality controls. The NAICS code 332312 identifies the work as related to prefabricated metal building system manufacturing, and no specific set-aside provisions are stated, meaning competition is open to all qualified contractors. All deliveries and installations are expected to occur at an unspecified location within Vermont, with detailed site logistics to be confirmed by the awardee after contract award.

Department of Economic Development

POSTED

DEADLINE

in about 1 month

Metal Fabrication and Shelving RefurbishmentThe contract entitled Metal Fabrication and Shelving Refurbishment involves the comprehensive restoration of metal shelving components through a series of industrial processes including straightening warped parts, precision welding, thorough rust removal, and repainting to restore structural integrity and aesthetics. Replacement of any worn or damaged components is required to ensure the refurbished shelving meets operational standards, with all work performed to uphold durability and longevity under facility use conditions. The work is to be carried out at the place of performance in Dakar, Senegal, under the auspices of the US Embassy Dakar, which is part of the Department of State. This subcontract is open for response until August 31, 2026, and falls under the NAICS code 332312, which pertains to metal fabrication services. The solicitation was posted on July 24, 2026, and while no set-aside classification or point of contact details are provided, the project is expected to be executed by a qualified subcontractor capable of handling industrial refurbishment tasks with precision and adherence to safety and quality benchmarks. All deliverables must align with the Embassy’s functional requirements and operational environment in Dakar.

US Embassy Dakar

POSTED

DEADLINE

in about 1 month

Fence Materials Supply (Prefabricated Panels, Posts, Hardware)The contract is for the supply of prefabricated fencing panels, structural posts, fasteners, and corrosion-resistant coatings to extend a secure perimeter, with all materials required to meet strict durability and performance standards. The scope includes delivery of fully assembled components ready for installation, with an emphasis on long-term resistance to environmental degradation, particularly in coastal conditions given the place of performance in Atlantic Beach, North Carolina, zip code 28512. All items must be compatible with existing infrastructure and installed to ensure a continuous, tamper-resistant barrier. This is a total small business set-aside under the SBA program, classified under NAICS code 332312 for fabricated metal product manufacturing, ensuring that only small businesses are eligible to respond. The opportunity was posted on July 24, 2026, with a firm response deadline of August 14, 2026, and is structured as a subcontract under the Department of Homeland Security, managed by the Base Elizabeth City (00081) office. Performance will be executed on-site at Atlantic Beach, requiring precise scheduling and logistics coordination to meet operational timelines. The contract does not specify a point of contact, and details are accessible through the official SAM.gov workspace link.

Base Elizabeth CITY(00081)

POSTED

DEADLINE

Metal Fabrication and Structural RepairThe contract titled Metal Fabrication and Structural Repair pertains to the repair, refurbishment, and replacement of damaged or corroded metal components within sunshade structures at Luke Air Force Base, including frames, supports, and fasteners. The work involves specialized metal fabrication to restore structural integrity and ensure long-term durability of these components, with all activities required to meet military-grade standards for safety and performance. The scope is limited to on-site work at the designated location and demands precision in handling corroded materials while adhering to strict environmental and safety protocols. This is a total small business set-aside under the SBA, specifically designated as a FAR 19.5 set-aside, meaning only businesses certified as small by the SBA are eligible to bid. It falls under NAICS code 332312, which classifies metal fabrication services involving structural metal products. The contract was posted on July 24, 2026, with a response deadline of August 25, 2026, at 6:00 PM. The contracting activity is managed by the Department of Defense through the FA4887 56 Cons Cc office, and all work must be performed at Luke Air Force Base in Arizona, with zip code 85309. The procurement is structured as a subcontract, suggesting it may be part of a larger project, but bidders must comply fully with all applicable federal and defense contractual requirements.

FA4887 56 Cons Cc

POSTED

DEADLINE

in about 1 month

Steel Fabrication and Welding ServicesThe contract involves custom steel fabrication services for critical components including mulcher housings, cutting drums, and mounting frames, with an emphasis on precision welding to ensure compliance with high durability and performance standards required for heavy-duty operational environments. All work must adhere to strict quality and structural integrity benchmarks suitable for military-grade equipment usage. This is a total small business set-aside subcontract under NAICS code 332312, open exclusively to small businesses as defined by the SBA, and is managed by the Department of Defense under the Commanding General. The solicitation was posted on July 24, 2026, with a firm deadline for responses on July 29, 2026, at 4:00 PM. Performance will take place in Twentynine Palms, California, with zip code 92277, and the contract is intended to support defense-related equipment needs through specialized fabrication capabilities.

Commanding General

POSTED

DEADLINE

Structural Metal Fabrication and Installation (Riser Manway & Internal Ladder)The contract calls for the fabrication and installation of a new riser manway and internal access ladder, requiring comprehensive structural steel work, precision welding, and application of corrosion-resistant coatings to ensure long-term durability in demanding environments. All work must be performed at Goodfellow AFB, with the full scope centered on integrating these components into existing infrastructure while meeting strict safety and operational standards. The project demands qualified labor with expertise in industrial metal fabrication and protective coating applications, with particular attention to compliance with material specifications and environmental resilience requirements. This is a Total Small Business Set-Aside under SBA guidelines, meaning only small businesses certified under the Small Business Administration can compete for this opportunity. It is classified under NAICS code 332312, which specifically pertains to structural metal fabrication. The solicitation was posted on July 24, 2026, and responses are due by August 24, 2026, at 7:00 PM. The contracting entity is the Department of Defense through the FA3030 17 Cons Cc office, and the work location is firmly designated at Goodfellow AFB with a zip code of 76908. All proposers must be prepared to meet rigorous defense contract standards for quality, scheduling, and site safety.

FA3030 17 Cons Cc

POSTED

DEADLINE

Outdoor Recreation - Mobile BleachersThe 6th Contracting Squadron at MacDill Air Force Base in Tampa, Florida, is soliciting bids for two identical, brand-new, mobile hydraulic-operated bleacher units with a combined minimum seating capacity of 300 spectators to support the base’s Outdoor Recreation program. This acquisition is a 100 percent small business set-aside under FAR 19.5, with NAICS code 332312, and is issued as a firm fixed-price contract using a Lowest Price Technically Acceptable source selection method. The bleachers must be highway-compliant, feature integrated battery-powered hydraulic systems, ADA-compliant enclosed riser stairs with handrails, leveling jacks, and a towing coupler, and must be delivered F.O.B. destination to MacDill AFB within 60 calendar days after contract award. All units must comply with stringent DoD packaging and marking standards, including MIL-STD-129 for external shipment labeling and MIL-STD-130 for permanent Unique Item Identification (UII) using Data Matrix barcodes compliant with ISO/IEC 16022 ECC 200. Each item must be registered in the DoD IUID Registry via Wide Area WorkFlow (WAWF), and invoicing must be submitted exclusively through WAWF using appropriate document types based on the fixed-price nature of the line item. The contractor is required to comply with all applicable federal and defense regulations, including prohibitions on inverted domestic corporations, trafficking in persons, and the acquisition of covered telecommunications equipment from restricted sources. Offerors must hold a current Unique Entity Identifier (UEI) and self-certify as a small business, and any joint venture structure used to meet socioeconomic criteria must be fully disclosed. Personnel performing work on base must obtain proper identification passes compliant with Air Force security directives and submit advanced lists for access clearance. Technical specifications, performance standards, and acceptance criteria are detailed in the Statement of Work dated 14 July 2026, which was amended on 24 July 2026 to remove a prior requirement for enclosed ADA stairs, now fully defined in the updated document. Proposals must be submitted via email to two designated points of contact no later than 29 July 2026 at 11:00 a.m. EDT, and questions are due by 24 July 2026 at the same time. ZIP files are prohibited due to network security restrictions. Final acceptance

FA4814 6 Cons Pk

POSTED

DEADLINE

EOU Sunshades Creech AFBThe Contract F4FANG6133A001 for the Experimental Operations Unit at Creech AFB requires the design, supply, and construction of four new shade structures with four aircraft parking bays each, to be installed on the south ramp west of existing structures on the airfield’s parking apron in Indian Springs, Nevada. Concurrently, four existing sunshades must be relocated and reoriented to align with the new structures, and a fifth sunshade must be demolished. Each new structure must incorporate LED lighting with a 12-hour battery backup powered by a photovoltaic array, along with conduit, copper wiring, service power outlets, a service panel, Una-strut support assembly, and a solar-powered obstruction light. All designs must adhere to specified aesthetic standards including tapered I-beam girders and Frazee Paint #213 Travatan finish, and comply with structural codes including UFC 3-301-01, IBC 2018, ASCE 7-16, and AISC standards to withstand 110 MPH sustained winds. The contractor must deliver progressive design drawings, redline construction documents, and stamped as-built AutoCAD and PDF record drawings, along with a comprehensive Operations and Maintenance Manual detailing materials, fasteners, and torque specs, and submit required FAA Form 7460-1 notifications. The project is subject to a 210-day performance period from notice to proceed, with 90 days allocated for design and 120 days for construction. The solicitation is a Firm Fixed Price (FFP) contract under a Total Small Business Set-Aside (NAICS 332312, size standard: 500 employees), requiring offerors to self-certify as a small business and provide their Unique Entity Identifier and CAGE code. Proposals must be submitted electronically via email to the designated point of contact by the deadline of August 7, 2026, at 5:00 PM PDT, with no submissions accepted through SAM.gov. Evaluation will be conducted on a Lowest-Priced, Technically Acceptable (LPTA) basis, requiring only a pass-fail technical assessment and full, accurate line-item pricing with no trade-offs between cost and non-cost factors. All work must occur at Creech AFB under strict security protocols, including mandatory security clearances for personnel, no weapons on base, no photography on the flight line, and FOD mitigation

FA4861 99 Cons Lgc

POSTED

DEADLINE

EE517-270245 - Cylindrical fenders for Base-Côte-NordThe contract, titled EE517-270245 - Cylindrical fenders for Base-Côte-Nord, is a federal solicitation issued by the Department of Public Works and Government Services under the Government of Canada, with a NAICS code of 332312, indicating manufacture of marine hardware. The solicitation was posted on July 24, 2026, and requires responses no later than August 12, 2026, at 7:00 PM Eastern Time. The estimated contract duration is 16 months, with a proposed start date of August 14, 2026, and performance is scheduled to occur in Québec. The primary point of contact for inquiries is Anna Meyerovich, Contracting Authority, reachable via email at anna.meyerovich@tpsgc-pwgsc.gc.ca. The opportunity is open without specific set-aside designation and can be viewed on the Canada Buys portal.

Department of Public Works and Government Services

POSTED

DEADLINE

Sheet Metal and Ductwork Fabrication/InstallationThe contract involves the supply, fabrication, sealing, insulation, and installation of sheet metal ductwork compliant with air quality and pressure standards, aligned with NAICS code 332312 for sheet metal work. The scope requires precise execution to meet technical specifications for performance and safety, ensuring the duct systems function effectively within the required environmental and operational parameters. Work is to be performed at various locations across Michigan under the oversight of DTMB, with no single fixed site designated for performance. The solicitation was posted on July 24, 2026, and responses are due by August 12, 2026, at 6:00 PM Eastern time. This is a subcontract opportunity with no set-aside designation applied, indicating it is open to all eligible contractors regardless of business size or ownership characteristics. There is no designated point of contact provided in the data, and the place of performance spans multiple unspecified locations within the state. Interested parties must access the official portal via the provided link to obtain full solicitation details and submit proposals.

POSTED

DEADLINE

Structural Steel Fabrication and InstallationThe contract entails the full scope of structural steel fabrication and installation, requiring precise field measurements, template development, and on-site assembly of steel components. It includes delegated design responsibilities, coordination of welding activities, and the submission of detailed shop drawings along with structural analysis reports to ensure compliance with engineering standards. The work spans multiple locations across Michigan, with no single fixed site designated for performance, indicating a distributed project requiring mobility and adaptation to varied site conditions. This subcontract, classified under NAICS code 332312, is issued by DTMB Michigan and requires proposals to be submitted by August 12, 2026. There is no specified set-aside status, and the contract is open to qualified subcontractors capable of delivering end-to-end steel solutions from initial measurement through final installation. All work must meet stringent technical and quality requirements, with particular emphasis on accurate documentation, structural integrity, and coordination among design, fabrication, and field teams to ensure seamless execution across various project sites.

POSTED

DEADLINE

More opportunities from Texas → Harris County

Same awarding agency

Lobbying Disclosure ServicesThe contract requires the provision of lobbying disclosure services to ensure compliance with federal regulations when the contract value surpasses $100,000. Specifically, it mandates the preparation and timely filing of the Federal Standard Form LLL to accurately report any lobbying activities associated with the contract. The solicitation is classified as a subcontract under NAICS code 541110, which pertains to architectural, engineering, and related services, and is posted by Harris County in Texas. Interested parties must submit responses by the deadline of August 17, 2026, at 7:00 PM ET, with no set-aside provisions specified. The opportunity is accessible through the Harris County Bonfire Hub portal, and while no point of contact or detailed office address is provided, the performance location remains unspecified within Texas.

Offices of Lawyers

POSTED

DEADLINE

Israel Boycott Compliance CertificationThe contract requires legal certification that the contractor does not participate in any boycott of Israel, as mandated by Texas Government Code Section 2270.002, and includes ongoing monitoring to ensure continued compliance with this requirement. This is a subcontract under Naics Code 541110, issued by Harris County in Texas, and the certification must be provided by the proposed contractor to affirm their adherence to state law prohibiting participation in boycotts of Israel. The contractor is expected to maintain compliance throughout the duration of the agreement and may be subject to verification or audit to confirm that no actions are taken that support or participate in such boycotts. The solicitation was posted on July 24, 2026, with a response deadline of August 17, 2026, and all submissions must be made through the designated online portal.

Offices of Lawyers

POSTED

DEADLINE

Insurance and Bonding Compliance SupportThe contract requires the provider to deliver insurance certificates that meet Harris County’s compliance standards, including a waiver of subrogation in favor of the county, ensuring that third-party insurers cannot seek reimbursement from Harris County for claims covered under the policy. The provider must also offer support for any bonding requirements necessary to guarantee the performance of the associated contract, ensuring all financial and legal safeguards are in place as mandated by the county. All documentation and services must be completed accurately and in a timely manner to fulfill contractual obligations. This opportunity is classified as a subcontract under NAICS code 524292 and is posted by Harris County in Texas, with submissions due by August 17, 2026. The provider is expected to operate in alignment with Harris County’s procurement and risk management protocols, without specifying a physical location for performance. There is no set-aside designation for small businesses or other categories, and responses must be submitted through the designated online portal by the stated deadline to be considered.

Pharmacy Benefit Management and Other Third Party Administration of Insurance and Pension Funds

POSTED

DEADLINE

Stormwater Pollution Prevention Plan (SWPPP) DevelopmentThe contract requires the development, implementation, and ongoing maintenance of a Stormwater Pollution Prevention Plan tailored to comply with environmental regulations set by the state of Texas and Harris County. The plan must be designed to ensure that all site operations during construction or activity phases minimize the risk of pollutants entering stormwater systems, thereby protecting local waterways and meeting regulatory obligations. The scope demands technical expertise in environmental planning and compliance, with a focus on practical measures that can be sustained throughout the project lifecycle. The solicitation is classified as a subcontract under NAICS code 541620, indicating it falls within environmental consulting services. The response deadline is set for August 17, 2026, with the opportunity posted on July 24, 2026. While the agency name listed is Harris County and the associated state is Texas, specific location details for performance or contact points are not provided. The contract is accessible via a public portal, and although there is no set-aside designation, interested parties must submit proposals by the stated deadline to be considered for award.

Environmental Consulting Services

POSTED

DEADLINE

Hazardous Materials Handling and SDS ManagementThe contract requires comprehensive management of hazardous materials through the supply of up-to-date Safety Data Sheets and the accurate labeling of all hazardous chemical containers in compliance with OSHA’s Hazard Communication Standard. It mandates strict adherence to protocols for the safe handling, storage, and disposal of hazardous substances on-site to ensure worker safety and regulatory compliance. All activities must align with industry best practices and federal requirements to minimize risks associated with chemical exposure and improper containment. This subcontract is issued by Harris County under NAICS code 541620 and is open for responses until August 17, 2026. The work will be performed at an unspecified location within Texas, with no set-aside provisions or specific organization type requirements identified. Interested parties must submit proposals through the provided online portal prior to the deadline, ensuring timely delivery of services critical to maintaining a compliant and secure work environment.

Environmental Consulting Services

POSTED

DEADLINE

Safety Compliance and OSHA Documentation ServicesThe contract requires the provision of comprehensive OSHA compliance services, including the accurate maintenance and submission of OSHA 300 and 300A logs, completion of detailed safety record questionnaires, and the execution of daily worksite safety inspections to ensure ongoing regulatory adherence. The goal is to maintain a robust safety program that prevents the contractor from being listed under OSHA’s Severe Violator Enforcement Program by proactively identifying and mitigating hazards. All activities must align strictly with OSHA standards to uphold workplace safety and avoid enforcement actions or penalties. The work is structured as a subcontract under Harris County’s procurement process, with a response deadline of August 17, 2026, and is categorized under NAICS code 541611 for management, scientific, and technical consulting services. Performance will be expected across all worksites under the county’s jurisdiction, though specific locations are not defined in the available data.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Supplier of Fastener-Related Hardware and ComponentsHarris County is seeking suppliers to provide ancillary hardware components that work in conjunction with screw fasteners, including anchors, rivets, threaded inserts, drive tools, and fastening systems. This subcontract opportunity is open to qualified vendors who can deliver these critical fastening elements to support infrastructure and construction projects within the county. The solicitation was posted on July 24, 2026, with responses due by August 24, 2026, at 7:00 PM. The contract falls under NAICS code 332215, which pertains to screw, bolt, and nut manufacturing, indicating the technical nature of the required hardware. While no specific place of performance or point of contact is listed, the work is expected to support operations in Texas. Interested parties must submit responses through the designated online portal before the deadline to be considered.

Metal Kitchen Cookware, Utensil, Cutlery, and Flatware (except Precious) Manufacturing

POSTED

DEADLINE

Packaging, Labeling, and Just-in-Time Delivery ServicesHarris County is seeking a subcontractor to provide comprehensive packaging, labeling, and just-in-time delivery services for fasteners across its facilities. The scope includes kitting, barcoding, and scheduled distribution of components, with potential vendor-managed inventory support to ensure continuous availability and reduce stockouts. Services must align with operational needs through precise logistics coordination, accurate labeling, and timely deliveries to multiple county locations. The contract is set to be awarded following a solicitation process with proposals due by August 24, 2026, and the work will fall under NAICS code 493190, which covers other warehousing and storage activities. Responses are to be submitted via the designated online platform, and the contract will be managed under the jurisdiction of Harris County, Texas, with no specific set-aside provisions indicated.

Other Warehousing and Storage

POSTED

DEADLINE

Supply of Specialty or High-Strength FastenersHarris County is seeking suppliers to provide specialty fasteners including high-tensile, stainless steel, corrosion-resistant, and custom-threaded components for use in infrastructure and public works projects. The opportunity is structured as a subcontract with a response deadline of August 24, 2026, and was posted on July 24, 2026, with no solicitation number assigned. The North American Industry Classification System code 332311 applies, indicating the focus is on forging and stamping operations related to fastener manufacturing. The place of performance and detailed office address are not specified, suggesting the work may be required across various county locations or projects. There is no set-aside designation indicated, meaning the contract is open to all qualified vendors without preference given to small businesses or other categories. Interested parties must submit responses through the designated online portal by the stated deadline.

Prefabricated Metal Building and Component Manufacturing

POSTED

DEADLINE

Medical Gas System InstallationHarris County is seeking qualified contractors to install or modify medical gas piping systems within the oncology suite to ensure reliable delivery of oxygen, vacuum, and nitrous oxide essential for patient care. The work must comply with all relevant safety and healthcare standards to support critical clinical operations, with performance expected to occur at the designated facility in Texas. This subcontract opportunity, categorized under NAICS code 238220 for plumbing, heating, and air-conditioning contractors, requires proposals to be submitted by August 31, 2026, with the solicitation posted on July 24, 2026. Bidders must have proven experience in medical gas system installations and be prepared to meet stringent operational, regulatory, and timing requirements to avoid disruptions to patient services. All work must be completed in coordination with existing clinical workflows and facility protocols.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

in about 1 month

Mechanical, Electrical, and Plumbing (MEP) UpgradesThe contract involves comprehensive mechanical, electrical, and plumbing upgrades focused on supporting high-power linear accelerator operations, including electrical service enhancements to accommodate increased power demands, HVAC system improvements to maintain precise environmental control critical for sensitive medical equipment, and potential plumbing integration for medical gas systems where applicable. These upgrades are essential to ensure operational safety, regulatory compliance, and system reliability within a healthcare or research facility environment. The work is classified under NAICS code 238210 for electrical contracting and is structured as a subcontract opportunity managed by Harris County in Texas. The solicitation was posted on July 24, 2026, with a response deadline of August 31, 2026, at 7:00 PM local time. All performance is expected to occur within the jurisdiction of Harris County, though specific location details are not provided in the data.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

in about 1 month

Radiation Shielding & Structural ModificationsThe contract entails the installation of comprehensive radiation shielding systems to support the safe operation of LINAC equipment, involving the use of lead-lined walls, barium plaster, and reinforced concrete barriers to ensure compliance with radiation safety standards. Structural modifications are required to provide adequate load-bearing capacity and stability for the heavy medical equipment, including reinforcement of floors and load-bearing walls to accommodate the weight and operational demands of the LINAC setup. The work must be executed in accordance with industry best practices for radiation containment and building integrity, with all materials and methods meeting applicable safety and regulatory requirements. The subcontract is issued by Harris County in Texas under NAICS code 238310 for specialized construction services. The opportunity was posted on July 24, 2026, with a response deadline of August 31, 2026, at 7:00 PM. Performance location details are not specified but are expected to occur within Harris County. No set-aside classification or point of contact information is provided. Contractors must be prepared to deliver high-precision shielding and structural integration work with full attention to safety, technical accuracy, and adherence to project specifications.

Drywall and Insulation Contractors

POSTED

DEADLINE

in about 1 month