Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Sheet Metal and Ductwork Fabrication/Installation

Active

State & Local

Response Deadline08/12/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the supply, fabrication, sealing, insulation, and installation of sheet metal ductwork compliant with air quality and pressure standards, aligned with NAICS code 332312 for sheet metal work. The scope requires precise execution to meet technical specifications for performance and safety, ensuring the duct systems function effectively within the required environmental and operational parameters. Work is to be performed at various locations across Michigan under the oversight of DTMB, with no single fixed site designated for performance. The solicitation was posted on July 24, 2026, and responses are due by August 12, 2026, at 6:00 PM Eastern time. This is a subcontract opportunity with no set-aside designation applied, indicating it is open to all eligible contractors regardless of business size or ownership characteristics. There is no designated point of contact provided in the data, and the place of performance spans multiple unspecified locations within the state. Interested parties must access the official portal via the provided link to obtain full solicitation details and submit proposals.

General Info

Supply, fabricate, and install sheet metal ductwork across Michigan per NAICS 332312, due August 12, 2026.

Agency

Michigan → DTMBView Agency

NAICS

332312 - Fabricated Structural Metal ManufacturingView NAICS

Place of Performance

Various, MI, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 24

subcontract

Response DeadlineAug 12

Submission deadline

Response Deadline

08/12/2026, 06:00:00 PM UTCin 18 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyMichigan → DTMB

ContactsNo contacts available

OfficeN/A

Organization / Agency

Michigan → DTMB

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply, fabrication, sealing, insulation, and installation of ductwork meeting air quality and pressure standards.

Similar Contracts

Same NAICS industry code

Structural Steel Fabrication and ErectionThe contract calls for the fabrication and on-site assembly of a structural steel framework for a building project under the jurisdiction of San Diego County, California. Performance of all work is required to occur locally in San Diego, with no specified alternative locations, ensuring that steel components are manufactured and erected according to site-specific engineering and safety requirements. The naics code 332312 indicates this is a specialized subcontract focused on structural steel fabrication and erection, distinguishing it from general contracting or other construction services. The solicitation was posted on July 24, 2026, with a firm response deadline of August 1, 2026, at 1:00 AM, leaving a narrow window for interested parties to submit proposals. As a subcontract, this engagement is likely part of a larger construction initiative managed by a prime contractor or public entity, with the winning bidder responsible for delivering precise steel components and their secure, compliant installation. All work must meet applicable technical, quality, and scheduling standards expected by San Diego County, though specific performance metrics or compliance requirements are not detailed in the provided data.

San Diego County

POSTED

DEADLINE

Supply of Standard Screw Fasteners (e.g., Bolts, Nuts, Washers)Harris County is seeking suppliers to provide a wide range of standard industrial screw fasteners including machine screws, bolts, nuts, washers, and threaded rods in both metric and imperial sizes for general county operations. The contract is structured as a subcontract with a solicitation response deadline of August 24, 2026, and was posted on July 24, 2026. The procurement falls under NAICS code 332312, which classifies it within the screw, nut, and bolt manufacturing sector. All items must meet industry standards for quality and compatibility to support diverse maintenance and construction needs across county facilities. Deliveries are expected to be made to various county locations within Texas, with no specific point of contact provided. Bidders must ensure compliance with required specifications and be prepared to fulfill ongoing supply demands as needed by county departments. The opportunity is not subject to any set-aside provisions and is open to qualified vendors through the BonfireHub portal.

POSTED

DEADLINE

Pre-Engineered Metal Building Supply and ErectionThe contract involves the supply, delivery, and structural erection of a pre-engineered metal building ranging from 3,000 to 5,600 square feet, with integrated climate control systems to ensure environmental regulation within the structure. The scope requires compliance with engineering standards for load capacity, weather resilience, and energy efficiency, with all components manufactured and assembled to meet specified performance benchmarks. The project demands precise coordination for on-site assembly, including foundation preparation, crane operations, and connection of climate control infrastructure to existing utilities or designated power sources. This is a subcontract opportunity posted by the Vermont Office of the Department of Economic Development, with a response deadline of September 1, 2026. Bidders must demonstrate experience in metal building fabrication, structural installation, and climate system integration, along with the ability to meet strict timelines and quality controls. The NAICS code 332312 identifies the work as related to prefabricated metal building system manufacturing, and no specific set-aside provisions are stated, meaning competition is open to all qualified contractors. All deliveries and installations are expected to occur at an unspecified location within Vermont, with detailed site logistics to be confirmed by the awardee after contract award.

Department of Economic Development

POSTED

DEADLINE

in about 1 month

Metal Fabrication and Shelving RefurbishmentThe contract entitled Metal Fabrication and Shelving Refurbishment involves the comprehensive restoration of metal shelving components through a series of industrial processes including straightening warped parts, precision welding, thorough rust removal, and repainting to restore structural integrity and aesthetics. Replacement of any worn or damaged components is required to ensure the refurbished shelving meets operational standards, with all work performed to uphold durability and longevity under facility use conditions. The work is to be carried out at the place of performance in Dakar, Senegal, under the auspices of the US Embassy Dakar, which is part of the Department of State. This subcontract is open for response until August 31, 2026, and falls under the NAICS code 332312, which pertains to metal fabrication services. The solicitation was posted on July 24, 2026, and while no set-aside classification or point of contact details are provided, the project is expected to be executed by a qualified subcontractor capable of handling industrial refurbishment tasks with precision and adherence to safety and quality benchmarks. All deliverables must align with the Embassy’s functional requirements and operational environment in Dakar.

US Embassy Dakar

POSTED

DEADLINE

in about 1 month

Fence Materials Supply (Prefabricated Panels, Posts, Hardware)The contract is for the supply of prefabricated fencing panels, structural posts, fasteners, and corrosion-resistant coatings to extend a secure perimeter, with all materials required to meet strict durability and performance standards. The scope includes delivery of fully assembled components ready for installation, with an emphasis on long-term resistance to environmental degradation, particularly in coastal conditions given the place of performance in Atlantic Beach, North Carolina, zip code 28512. All items must be compatible with existing infrastructure and installed to ensure a continuous, tamper-resistant barrier. This is a total small business set-aside under the SBA program, classified under NAICS code 332312 for fabricated metal product manufacturing, ensuring that only small businesses are eligible to respond. The opportunity was posted on July 24, 2026, with a firm response deadline of August 14, 2026, and is structured as a subcontract under the Department of Homeland Security, managed by the Base Elizabeth City (00081) office. Performance will be executed on-site at Atlantic Beach, requiring precise scheduling and logistics coordination to meet operational timelines. The contract does not specify a point of contact, and details are accessible through the official SAM.gov workspace link.

Base Elizabeth CITY(00081)

POSTED

DEADLINE

Metal Fabrication and Structural RepairThe contract titled Metal Fabrication and Structural Repair pertains to the repair, refurbishment, and replacement of damaged or corroded metal components within sunshade structures at Luke Air Force Base, including frames, supports, and fasteners. The work involves specialized metal fabrication to restore structural integrity and ensure long-term durability of these components, with all activities required to meet military-grade standards for safety and performance. The scope is limited to on-site work at the designated location and demands precision in handling corroded materials while adhering to strict environmental and safety protocols. This is a total small business set-aside under the SBA, specifically designated as a FAR 19.5 set-aside, meaning only businesses certified as small by the SBA are eligible to bid. It falls under NAICS code 332312, which classifies metal fabrication services involving structural metal products. The contract was posted on July 24, 2026, with a response deadline of August 25, 2026, at 6:00 PM. The contracting activity is managed by the Department of Defense through the FA4887 56 Cons Cc office, and all work must be performed at Luke Air Force Base in Arizona, with zip code 85309. The procurement is structured as a subcontract, suggesting it may be part of a larger project, but bidders must comply fully with all applicable federal and defense contractual requirements.

FA4887 56 Cons Cc

POSTED

DEADLINE

in about 1 month

Steel Fabrication and Welding ServicesThe contract involves custom steel fabrication services for critical components including mulcher housings, cutting drums, and mounting frames, with an emphasis on precision welding to ensure compliance with high durability and performance standards required for heavy-duty operational environments. All work must adhere to strict quality and structural integrity benchmarks suitable for military-grade equipment usage. This is a total small business set-aside subcontract under NAICS code 332312, open exclusively to small businesses as defined by the SBA, and is managed by the Department of Defense under the Commanding General. The solicitation was posted on July 24, 2026, with a firm deadline for responses on July 29, 2026, at 4:00 PM. Performance will take place in Twentynine Palms, California, with zip code 92277, and the contract is intended to support defense-related equipment needs through specialized fabrication capabilities.

Commanding General

POSTED

DEADLINE

Structural Metal Fabrication and Installation (Riser Manway & Internal Ladder)The contract calls for the fabrication and installation of a new riser manway and internal access ladder, requiring comprehensive structural steel work, precision welding, and application of corrosion-resistant coatings to ensure long-term durability in demanding environments. All work must be performed at Goodfellow AFB, with the full scope centered on integrating these components into existing infrastructure while meeting strict safety and operational standards. The project demands qualified labor with expertise in industrial metal fabrication and protective coating applications, with particular attention to compliance with material specifications and environmental resilience requirements. This is a Total Small Business Set-Aside under SBA guidelines, meaning only small businesses certified under the Small Business Administration can compete for this opportunity. It is classified under NAICS code 332312, which specifically pertains to structural metal fabrication. The solicitation was posted on July 24, 2026, and responses are due by August 24, 2026, at 7:00 PM. The contracting entity is the Department of Defense through the FA3030 17 Cons Cc office, and the work location is firmly designated at Goodfellow AFB with a zip code of 76908. All proposers must be prepared to meet rigorous defense contract standards for quality, scheduling, and site safety.

FA3030 17 Cons Cc

POSTED

DEADLINE

Outdoor Recreation - Mobile BleachersThe 6th Contracting Squadron at MacDill Air Force Base in Tampa, Florida, is soliciting bids for two identical, brand-new, mobile hydraulic-operated bleacher units with a combined minimum seating capacity of 300 spectators to support the base’s Outdoor Recreation program. This acquisition is a 100 percent small business set-aside under FAR 19.5, with NAICS code 332312, and is issued as a firm fixed-price contract using a Lowest Price Technically Acceptable source selection method. The bleachers must be highway-compliant, feature integrated battery-powered hydraulic systems, ADA-compliant enclosed riser stairs with handrails, leveling jacks, and a towing coupler, and must be delivered F.O.B. destination to MacDill AFB within 60 calendar days after contract award. All units must comply with stringent DoD packaging and marking standards, including MIL-STD-129 for external shipment labeling and MIL-STD-130 for permanent Unique Item Identification (UII) using Data Matrix barcodes compliant with ISO/IEC 16022 ECC 200. Each item must be registered in the DoD IUID Registry via Wide Area WorkFlow (WAWF), and invoicing must be submitted exclusively through WAWF using appropriate document types based on the fixed-price nature of the line item. The contractor is required to comply with all applicable federal and defense regulations, including prohibitions on inverted domestic corporations, trafficking in persons, and the acquisition of covered telecommunications equipment from restricted sources. Offerors must hold a current Unique Entity Identifier (UEI) and self-certify as a small business, and any joint venture structure used to meet socioeconomic criteria must be fully disclosed. Personnel performing work on base must obtain proper identification passes compliant with Air Force security directives and submit advanced lists for access clearance. Technical specifications, performance standards, and acceptance criteria are detailed in the Statement of Work dated 14 July 2026, which was amended on 24 July 2026 to remove a prior requirement for enclosed ADA stairs, now fully defined in the updated document. Proposals must be submitted via email to two designated points of contact no later than 29 July 2026 at 11:00 a.m. EDT, and questions are due by 24 July 2026 at the same time. ZIP files are prohibited due to network security restrictions. Final acceptance

FA4814 6 Cons Pk

POSTED

DEADLINE

EOU Sunshades Creech AFBThe Contract F4FANG6133A001 for the Experimental Operations Unit at Creech AFB requires the design, supply, and construction of four new shade structures with four aircraft parking bays each, to be installed on the south ramp west of existing structures on the airfield’s parking apron in Indian Springs, Nevada. Concurrently, four existing sunshades must be relocated and reoriented to align with the new structures, and a fifth sunshade must be demolished. Each new structure must incorporate LED lighting with a 12-hour battery backup powered by a photovoltaic array, along with conduit, copper wiring, service power outlets, a service panel, Una-strut support assembly, and a solar-powered obstruction light. All designs must adhere to specified aesthetic standards including tapered I-beam girders and Frazee Paint #213 Travatan finish, and comply with structural codes including UFC 3-301-01, IBC 2018, ASCE 7-16, and AISC standards to withstand 110 MPH sustained winds. The contractor must deliver progressive design drawings, redline construction documents, and stamped as-built AutoCAD and PDF record drawings, along with a comprehensive Operations and Maintenance Manual detailing materials, fasteners, and torque specs, and submit required FAA Form 7460-1 notifications. The project is subject to a 210-day performance period from notice to proceed, with 90 days allocated for design and 120 days for construction. The solicitation is a Firm Fixed Price (FFP) contract under a Total Small Business Set-Aside (NAICS 332312, size standard: 500 employees), requiring offerors to self-certify as a small business and provide their Unique Entity Identifier and CAGE code. Proposals must be submitted electronically via email to the designated point of contact by the deadline of August 7, 2026, at 5:00 PM PDT, with no submissions accepted through SAM.gov. Evaluation will be conducted on a Lowest-Priced, Technically Acceptable (LPTA) basis, requiring only a pass-fail technical assessment and full, accurate line-item pricing with no trade-offs between cost and non-cost factors. All work must occur at Creech AFB under strict security protocols, including mandatory security clearances for personnel, no weapons on base, no photography on the flight line, and FOD mitigation

FA4861 99 Cons Lgc

POSTED

DEADLINE

EE517-270245 - Cylindrical fenders for Base-Côte-NordThe contract, titled EE517-270245 - Cylindrical fenders for Base-Côte-Nord, is a federal solicitation issued by the Department of Public Works and Government Services under the Government of Canada, with a NAICS code of 332312, indicating manufacture of marine hardware. The solicitation was posted on July 24, 2026, and requires responses no later than August 12, 2026, at 7:00 PM Eastern Time. The estimated contract duration is 16 months, with a proposed start date of August 14, 2026, and performance is scheduled to occur in Québec. The primary point of contact for inquiries is Anna Meyerovich, Contracting Authority, reachable via email at anna.meyerovich@tpsgc-pwgsc.gc.ca. The opportunity is open without specific set-aside designation and can be viewed on the Canada Buys portal.

Department of Public Works and Government Services

POSTED

DEADLINE

Structural Steel Fabrication and InstallationThe contract entails the full scope of structural steel fabrication and installation, requiring precise field measurements, template development, and on-site assembly of steel components. It includes delegated design responsibilities, coordination of welding activities, and the submission of detailed shop drawings along with structural analysis reports to ensure compliance with engineering standards. The work spans multiple locations across Michigan, with no single fixed site designated for performance, indicating a distributed project requiring mobility and adaptation to varied site conditions. This subcontract, classified under NAICS code 332312, is issued by DTMB Michigan and requires proposals to be submitted by August 12, 2026. There is no specified set-aside status, and the contract is open to qualified subcontractors capable of delivering end-to-end steel solutions from initial measurement through final installation. All work must meet stringent technical and quality requirements, with particular emphasis on accurate documentation, structural integrity, and coordination among design, fabrication, and field teams to ensure seamless execution across various project sites.

POSTED

DEADLINE

More opportunities from Michigan → DTMB

Same awarding agency

Minority, Woman, or Disabled-Owned Business (M/W/DBE) Subcontracting OpportunitiesCertified Minority, Woman, or Disabled-Owned Business (M/W/DBE) firms are invited to pursue subcontracting opportunities across multiple trades including electrical, plumbing, and environmental services under this solicitation issued by the Michigan Department of Technology, Management and Budget. Participation by M/W/DBE firms is actively encouraged as a means of promoting equitable economic inclusion, though it is not a mandatory requirement for bidders. The opportunity is categorized under NAICS code 238210, which aligns with electrical contracting services, and performance may occur at various locations across the state. Interested firms must submit their responses by the deadline of August 5, 2026, at 6:00 PM Eastern Time, with the solicitation posted on July 24, 2026. There is no formal set-aside designation, and the contract type is classified as a subcontract, allowing eligible businesses to position themselves as potential partners on larger project teams. All relevant details and submission instructions can be accessed through the provided state procurement portal link.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Security Guard Services (Temporary Site Security)The contract calls for the provision of temporary security personnel to guard construction sites during periods when permanent security systems are offline or when unsecured openings are created due to ongoing work. This subcontract is issued by the Michigan agency DTMB under NAICS code 561612 for private security services and is intended to ensure physical security continuity when automated or fixed protections are compromised. The services will be performed at various locations across the state, with no single fixed site of performance, requiring providers to deploy personnel flexibly to multiple active construction zones. Bids must be submitted by August 5, 2026, with the solicitation posted on July 24, 2026, and no set-aside provisions or specific organization type restrictions are indicated. The contract emphasizes rapid response and reliable on-site presence to mitigate risks during transient vulnerabilities in site security infrastructure.

Security Guards and Patrol Services

POSTED

DEADLINE

Waste Management & Recycling ServicesThe contract seeks subcontractors to provide onsite sorting, recycling, and disposal of construction debris across various locations in Michigan, requiring a comprehensive waste management plan to ensure compliance with environmental and regulatory standards. Contractors must implement procedures to maximize recycling rates, properly segregate materials, and safely dispose of non-recyclable waste, all while adhering to established protocols for handling hazardous and non-hazardous materials. Weekly progress reports are mandatory to document volumes processed, recycling percentages, disposal methods, and any deviations or issues encountered during operations. The solicitation is open for responses until August 5, 2026, under the NAICS code 562111 for solid waste collection and treatment services, and is structured as a subcontract opportunity managed by the Michigan agency DTMB. Performance will occur at multiple unspecified construction sites throughout the state, necessitating flexible logistics and local coordination. Bidders must demonstrate experience in construction waste management, possess the equipment and personnel to handle daily onsite operations, and submit a detailed plan outlining their approach to compliance, reporting, and sustainability goals. There is no set-aside designation, and responses must be submitted through the provided Michigan state procurement portal.

Solid Waste Collection

POSTED

DEADLINE

Lead-Based Paint AbatementThe contract titled Lead-Based Paint Abatement pertains to the safe removal and disposal of lead-based paint in various locations across Michigan, requiring strict adherence to state and EPA regulations. The work demands comprehensive containment measures to prevent cross-contamination, full protection protocols for workers including proper PPE and training, and detailed compliance reporting to document all procedures and waste handling. All activities must meet federal and state environmental and occupational safety standards to ensure public health and regulatory integrity. Submitted as a subcontract, the opportunity is open for responses until August 5, 2026, with the posting date listed as July 24, 2026. The NAICS code 562910 classifies this under Remediation Services, and the overseeing agency is DTMB under the Michigan state organization. Performance will occur at multiple unspecified sites within the state, and interested parties must access the official portal via the provided link to review requirements, submit proposals, and ensure alignment with all technical and administrative conditions outlined by the procuring entity.

Remediation Services

POSTED

DEADLINE

Asbestos Abatement ServicesThe contract for Asbestos Abatement Services requires the identification, containment, and safe removal of asbestos-containing materials during demolition activities across various locations in Michigan. All work must strictly adhere to state regulations governing asbestos handling, including proper encapsulation, worker protection, and decontamination procedures. Compliance with attestation requirements is mandatory, ensuring documentation of all steps taken to meet environmental and safety standards throughout the process. The work is classified under NAICS code 562910 and is structured as a subcontract, with responses due by August 5, 2026. The procurement is managed by DTMB under the State of Michigan, and performance is expected to occur at multiple unspecified sites within the state. Access to detailed solicitation materials is available through the provided online portal.

Remediation Services

POSTED

DEADLINE

Bathroom & Plumbing Renovation (Shower and Fixture Upgrades)The contract involves the demolition and complete replacement of plumbing systems and bathroom fixtures across multiple occupied state facilities in Michigan, with a focus on fully renovating shower rooms and restroom areas. Work must be performed without disrupting ongoing operations, requiring careful coordination and adherence to strict operational protocols to ensure safety and minimal interference with facility occupants. The scope includes removing outdated or damaged components and installing new, modern plumbing infrastructure and fixtures to meet current standards and improve functionality. This is a subcontract opportunity governed by NAICS code 238220, classified under plumbing, heating, and air-conditioning contracting, with a response deadline of August 5, 2026. The contract is managed by the Michigan Department of Technology, Management and Budget, and performance will occur at various locations throughout the state. Bidders must be prepared to handle complex logistics in active environments, and all work must comply with state facility regulations, health and safety standards, and timelines that accommodate ongoing occupancy. The solicitation is accessible via the Michigan state procurement portal.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Electrical Systems Installation (Power & Low-Voltage Wiring)The contract encompasses the full installation of electrical systems, covering power wiring, conduit, junction boxes, and both Class 2 and Class 3 low-voltage wiring systems. This includes all necessary testing, commissioning, and coordination with other trades to ensure seamless integration and operational readiness. Work is required across multiple locations identified as various sites within Michigan, with no single fixed address specifying the place of performance. The scope mandates compliance with industry standards for both high and low-voltage installations, with emphasis on precision, safety, and timely completion. This is a subcontract solicitation under NAICS code 238210 for Electrical Contractors, posted on July 24, 2026, with a response deadline of August 5, 2026. The contracting entity is DTMB, the Michigan Department of Technology, Management and Budget. The procurement is open to qualified subcontractors seeking to provide comprehensive electrical services, and interested parties must respond via the designated state portal before the deadline. There is no set-aside designation specified, and all proposals must meet the technical and logistical demands of a multi-site, coordinated installation effort.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Printing and Bidding Document ReproductionThe contract entails high-volume printing and reproduction of bidding documents and construction packages, with specialized handling of large-format materials and professional binding services required to meet project specifications. Work must be executed with precision to ensure documents are accurate, legible, and properly assembled for distribution to contractors and stakeholders involved in public construction initiatives. The scope demands capability in managing large quantities of technical documentation under tight deadlines and quality standards suitable for governmental procurement processes. This is a subcontract opportunity under the NAICS code 323111, issued by the Michigan agency DTMB, with a posting date of July 24, 2026, and a response deadline of August 6, 2026, at 6:00 p.m. No set-aside designation is specified, and the place of performance and point of contact details are not provided in the data, though the work is tied to Michigan-based projects. Interested parties must submit proposals through the designated online portal prior to the deadline to be considered for award.

Commercial Printing (except Screen and Books)

POSTED

DEADLINE

Environmental, Geotechnical, and Surveying Sub-Consultant ServicesThe contract outlines the provision of reimbursable sub-consultant services focused on environmental, geotechnical, and surveying support, including soil borings, site surveys, environmental testing, and laboratory analysis. These services are intended to support broader infrastructure or development projects under the oversight of the Michigan agency DTMB, with work to be performed at unspecified locations within the state. The solicitation is classified under NAICS code 541620, indicating it relates to environmental consulting services, and is structured as a subcontract with no set-aside designation, making it open to all eligible vendors. The opportunity was posted on July 24, 2026, with a response deadline of August 6, 2026, and bidders must submit proposals through the Michigan government’s online procurement portal. Payment for services rendered will be on a reimbursable basis, meaning costs incurred by the sub-consultant will be reimbursed by the prime contractor upon verification and approval. All technical work must meet applicable regulatory and industry standards to ensure accurate data collection and reporting for environmental compliance and geotechnical evaluation purposes.

Environmental Consulting Services

POSTED

DEADLINE

CAD Drafting and Technical DocumentationThe contract involves the production of detailed construction drawings, technical specifications, and as-built documentation compliant with AutoCAD and DMVA CAD standards, ensuring precision and consistency in engineering deliverables. The work is classified under NAICS code 541370, indicating it falls within the architectural and engineering services sector, and is structured as a subcontract requiring adherence to specific technical protocols established by the Michigan agency. All documentation must meet rigorous quality benchmarks to support construction and maintenance activities. The solicitation was posted on July 24, 2026, with a strict response deadline of August 6, 2026, at 6:00 PM, leaving a limited window for qualified vendors to submit proposals. The contracting entity is DTMB, operating under the Michigan state organizational structure, though the precise location of performance and point of contact details are not specified. The primary focus is on technical execution rather than procurement type or set-aside provisions, with all deliverables expected to be fully compliant with state-mandated CAD standards. Interested parties must access the official system via the provided UI link to submit responses.

Surveying and Mapping (except Geophysical) Services

POSTED

DEADLINE

Landscape Architecture ServicesThe contract titled Landscape Architecture Services seeks specialized expertise in designing sustainable exterior spaces with a focus on rain gardens and their seamless integration with civil and architectural systems. The work is intended to support environmentally resilient infrastructure, emphasizing water management, native vegetation, and harmonious coordination with surrounding built environments. This subcontract is issued under NAICS code 541320, which pertains to landscape architecture services, and is managed by the Michigan agency DTMB with a response deadline of August 6, 2026. The project is expected to involve detailed planning, analysis, and implementation of ecological design solutions that meet sustainability standards and enhance public or institutional spaces. There is no specified set-aside status or place of performance details provided, and all submissions must be completed through the specified Michigan state procurement portal prior to the deadline.

Landscape Architectural Services

POSTED

DEADLINE

Civil Engineering and Stormwater ManagementThe contract focuses on civil engineering and stormwater management services, requiring the design of comprehensive stormwater management systems, erosion control plans, rain gardens, and civil site layouts that include drainage and utility infrastructure. The work supports environmental compliance and sustainable land development through thoughtful hydrologic and hydraulic engineering solutions tailored to the project location in Michigan. All deliverables must align with applicable regulatory standards and local land use requirements to ensure effective water quality protection and stormwater runoff mitigation. Issued as a subcontract under NAICS code 541320 by the Michigan-based DTMB agency, the opportunity was posted on July 24, 2026, with a response deadline of August 6, 2026. The solicitation does not specify a set-aside classification or contracting office address, and technical submissions must be submitted through the designated Michigan state procurement portal. Interested parties are expected to demonstrate expertise in civil site design, stormwater infrastructure planning, and implementation of green stormwater practices such as rain gardens and erosion controls, with a strong emphasis on deliverables that integrate seamlessly into broader construction or development projects.

Landscape Architectural Services

POSTED

DEADLINE