Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

RAMP ASSY CORNER LH

Open
SPE8E5-27-T-0503Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE8E5-27-T-0503 is a federal procurement issued by the Defense Logistics Agency for the supply of 20 units of RAMP ASSY CORNER LH, identified by NSN 5440-01-553-0688. The contract requires delivery within 166 days after award, with a need ship date of May 9, 2027, and an original required delivery date of September 21, 2027. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Inspection and acceptance will occur at the destination per FAR 52.246-1. The procurement is a total small business set-aside under FAR 19.5 and falls under NAICS code 336611. Technical compliance is governed by the DLA Master List of Technical and Quality Requirements and specific TDP Rev A Gen 1 drawings. Packaging must adhere to ASTM D3951 and RP001, with marking and labeling following MIL-STD-129. Key regulatory requirements include CMMC Level 2 self-assessment, safeguarding of covered defense information, and compliance with the Buy American and Balance of Payments Program. Additive manufacturing is prohibited unless specifically authorized. Payment processing is managed through the Wide Area WorkFlow system.

General Info

DLA solicitation for 20 corner ramp assemblies, set aside for small businesses.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITY

NAICS

336611 - Ship Building and Repairing

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

SBA

Documents

1
PDF, High priority: read this first19 pages · rfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUSA
Organization / AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Office AddressUSA
Contacts
BRANDON WICKER
Sign up to see this detail
Sign up to see this detail

Full Description

Show more
RAMP ASSY CORNER LH
RAMP ASSY CORNER LH
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT
DLA DURING "OPEN SOLICITATION ONLY".
TO RECEIVE A COPY OF THE DRAWING(S)<(>,<)>
FOR EBS SOLICITATIONS USE URL
HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
RD002, COVERED DEFENSE INFORMATION APPLIES
TDP Rev A Gen 1 IAW BASIC DRAWING NR 81337 5-13-2515 REVISION NR AC DTD 08/30/2012 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 81337 5-13-2574 REVISION NR K DTD 10/17/2001 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 81337 5-13-2572 REVISION NR N DTD 04/14/2005 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 81337 5-13-2562 REVISION NR P DTD 04/02/2007 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 81337 5-13-2516 REVISION NR K DTD 03/17/2006 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 81337 5-13-2517 REVISION NR J DTD 03/17/2006
SPE8E5-27-T-0503
SECTION B
PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 81337 5-13-2518 REVISION NR L DTD 03/17/2006 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 81337 5-13-2554 REVISION NR F DTD 10/17/2001 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 81337 5-13-2515G10 REVISION NR DTD 03/27/2023 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7019095647 0001 EA 20.000
NSN/MATERIAL:5440015530688
DELIVERY (IN DAYS):0166
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
SPE8E5-27-T-0503
SECTION B
PR: 7019095647 PRLI: 0001 CONT’D
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:05/09/2027 Original Required Delivery Date:09/21/2027
SPE8E5-27-T-0503 NSN/Part Number: 5440-01-553-0688 Quantity: 20 EA Purchase Request: 7019095647QTY: 20 Delivery: 166 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336611
New
DIBBS
Fiberglass Stepladder SupplyThis subcontract through the Department of Defense DDSP New Cumberland Facility requires the supply of 16 fiberglass stepladders for prime contractors fulfilling DLA supply contracts. The equipment must be manufactured or sourced to meet specific technical standards, including a molded top, double rivet construction, a 300 lb weight capacity, and a total weight of 20 lb. Dimensions must adhere to a nominal spread of 26.500 inches and a bottom width of 19.750 inches, specifically following Louisville Ladder Inc 667R1 P/N FY8003. Eligible providers must possess a valid SAM registration, UEI, and CAGE code to participate. The performance location for this contract is New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 23, 2026, for this procurement under NAICS code 336611.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336611
New
DIBBS
STEPLADDER
Solicitation # SPE8E5-27-T-0523
Solicitation SPE8E5-27-T-0523 is for the procurement of 16 fiberglass stepladders for the Department of Defense, specifically the DLA Distribution DDSP New Cumberland Facility. The required ladders must feature a molded top and double rivet construction, with a nominal spread of 26.5 inches, a bottom width of 19.75 inches, and a total weight of 20 lbs. Each unit must support a weight capacity of 300 lbs. The procurement specifies a reference to Louisville Ladder Inc 667R1 P/N FY8003 and strictly prohibits the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions per NAVSEA 5100-003D. Delivery is required within 166 days after order, with a required delivery date of March 7, 2027, and a need ship date of May 9, 2027, shipped FOB Origin. Inspection and acceptance will occur at the destination. Packaging must comply with ASTM D3951 and RP001, while marking and labeling must adhere to MIL-STD-129. The contract incorporates several FAR and DFARS clauses, including requirements for the Buy American and Balance of Payments Program, basic safeguarding of contractor information systems, and the use of the Wide Area WorkFlow system for electronic invoicing. Quotations are due by November 23, 2026.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336611
New
DIBBS
CEMENT, INSULATION, HIGH
Solicitation # SPE8E6-27-T-0615
Solicitation SPE8E6-27-T-0615 is a federal procurement issued by DLA Distribution San Joaquin for 11 bags of high-temperature insulation cement (NSN 5640-00-272-2995). The contract is a fixed-price agreement with delivery required by July 15, 2027, and a need ship date of July 1, 2027. The shipment is FOB Origin and will be delivered to the DLA Distribution San Joaquin facility in Tracy, California. A critical requirement of this acquisition is the First Article Test (FAT), requiring the contractor to test one unit and submit a report for approval by the DCMA Administrative Contracting Officer. Technical compliance is governed by basic specification MIL-C-2861E, and the product must adhere to USCG 164.009 for fire resistance. At the time of offer, vendors must provide certifications for fire resistance and US Naval Toxicity Approval per MIL-C-2861. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with specific requirements for the handling and labeling of hazardous materials per IP025 and 29 CFR 1910.1200. The procurement also incorporates various FAR and DFARS clauses regarding small business preferences, cybersecurity safeguarding for covered defense information, and domestic material restrictions.
DLA DIST SAN JOAQUIN

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336611
New
DIBBS
BREECH ASSEMBLY
Solicitation # SPE7L1-27-T-4571
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336611
New
DIBBS
SOUND CONTROLLING FELT
Solicitation # SPE8E6-27-T-0629
This procurement, solicitation SPE8E6-27-T-0629, is for the supply of 12 rolls of sound controlling felt, identified by NSN 5640-00-542-3449. The material is a fibrous glass acoustic blanket with binder, unfaced, measuring 600 inches in length, 72 inches in width, and 2 inches in thickness. Key technical specifications include a maximum temperature limitation of 400 degrees Fahrenheit and a requirement that the material is not resin treated, woven together, or bound with thread. Vendors must provide a Health Hazard Assessment approved by the Navy Marine Corps Public Health Center per MIL DTL 32585. The contract requires strict adherence to quality and packaging standards, including a Certificate of Quality Compliance and compliance with MIL-STD-129 for marking and labeling. Packaging must follow ASTM D3951 for non-hazardous materials or TQ requirement IP025 for hazardous materials, with palletization governed by RP001. Delivery is required 59 days after order award on an FOB Origin basis, with the destination being the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Administration is handled via the Wide Area WorkFlow system, and the procurement is subject to the Buy American Act and Berry Amendment restrictions.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336611
New
DIBBS
BACK PANEL WITH LOCKS
Solicitation # SPE7M4-27-T-3125
This solicitation, issued by the DLA Weapons Support Fluid Handling Division under solicitation number SPE7M4-27-T-3125, is for the procurement of one back panel with locks, identified by NSN 2090-01-285-8131. The item must be delivered FOB Destination to the USS John Paul Jones DDG 53 within 20 days after the order. Technical specifications are governed by basic drawing number 53711 5959312 revision D, and the contract requires strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. The contract contains significant regulatory requirements, including a total prohibition on Class I ozone depleting chemicals and strict export controls under ITAR and EAR, requiring DLA contractors to have approved US/Canada Joint Certification Program certification. Cybersecurity compliance is mandatory, specifically referencing CMMC Level 2 and DFARS 252.204-7012 for safeguarding covered defense information. Invoicing and payment must be processed electronically through the Wide Area Workflow system. The procurement is open to full and open competition, with specific representations required for small businesses and those providing covered defense telecommunications equipment.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336611
New
SLED
Marine Propulsion & Machinery (Engine Replacement)This subcontract for the Chatham Area Transit Authority in Georgia involves the supply and installation of main engines for ferry projects. The scope of work requires replacing existing Cummins BT6 110HP main engines with upgraded 125HP units, ensuring they are fully installed and commissioned. Additionally, the contractor is responsible for providing the necessary technical data for the Inspection Test Plan and Quality Function Analysis to secure USCG approval. The project must strictly adhere to the Buy America Act. Interested parties should note that the solicitation was posted on November 10, 2026, with a response deadline of January 22, 2027. The work falls under NAICS code 336611 for Marine Propulsion and Machinery.
Chatham Area Transit Authority

POSTED

about 21 hours ago

DEADLINE

in 2 months
View Details
NAICS: 336611
New
SLED
CAT FERRY VESSEL SUSIE KING TAYLOR RESTORATION
Solicitation # 2027-04
The Chatham Area Transit Authority (CAT) is soliciting bids for the restoration of the Ferry Vessel Susie King Taylor, with a submission deadline of January 22, 2027. The scope of work includes comprehensive interior renovations of the pilothouse and passenger accommodations, such as refinishing floors, updating wood trim, and installing a new electronics suite and security system. Exterior work involves replacing running lights with LED fixtures. Critical technical requirements include the submission of Installation Test Protocols and Qualitative Failure Analysis for USCG approval, a stability test supervised by Dejong & Lebet, Inc., and the reinstallation of lead ballast and flotation foam. All welding and materials must adhere to USCG and ABS Standards for Steel Construction. The contract is subject to strict federal and state regulations, including Buy America requirements under 49 U.S.C. 5323(j), which mandate that steel and manufactured products be produced in the United States. Contractors must comply with E-Verify requirements per O.C.G.A. §13-10-91(b)(1), as well as ADA and Section 504 accessibility standards. Award selection will be based on the highest ranked proposer as determined by a CAT Evaluation Committee. Applicants must provide proof of Commercial General/Professional Liability insurance and complete various certifications regarding debarment, lobbying, and Disadvantaged Business Enterprise (DBE) status. Proposals must be submitted as one unbound original, three copies, and one electronic copy to the procurement manager in Savannah, Georgia.
Chatham Area Transit Authority

POSTED

about 21 hours ago

DEADLINE

in 2 months
View Details
NAICS: 336611
New
SLED
F&W, 2018 Munson Packman Boat Repower project
Solicitation # 2018 Munson Packman Boat Repower
The Confederated Tribes of the Colville Reservation Fish and Wildlife Department is seeking a factory-certified Honda Marine Authorized Dealer to perform a complete propulsion repower and helm system integration on a 30-foot Munson Packman landing craft. The project consists of six phases: decommissioning and removing two existing Honda BF250A outboards and legacy iST components; installing two new Honda BF250D Drive-by-Wire outboards; integrating dual-station Honda iST electronic control heads; upgrading the fuel system with USCG Type A1-15 lines; installing new digital gauges and NMEA 2000 network integration; and conducting final commissioning and a minimum two-hour sea trial. The contractor is responsible for all procurement, installation, and digital rigging, and must provide a secure facility for vessel storage. Proposals are due by November 13, 2026, and will be evaluated based on a 100-point scale considering technical expertise, budget, and TERO compliance, with a preference for qualified Indian Offerors. Awardees must provide a performance bond for contracts exceeding 100,000 dollars or accept a 25 percent retainage, and maintain comprehensive insurance including general liability and worker's compensation. All work must be performed by technicians with at least five years of experience in commercial aluminum vessels. The contract is subject to tribal law and the jurisdiction of the Colville Tribal Court, with payments contingent upon the availability of funds within the tribal treasury's fiscal year.
Confederated Tribes of the Colville Reservation

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 336611
New
DIBBS
PANEL, VEHICULAR OPERAT
Solicitation # SPE7M4-27-T-1904
Solicitation SPE7M4-27-T-1904 is a fixed-price request for quotations issued by the DLA Weapons Support Fluid Handling Division for the procurement of one Vehicular Operation Panel, NSN 2090-01-657-7212. This HUBZone set-aside acquisition falls under NAICS 336611 and requires delivery to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The required delivery date is June 9, 2028, with a delivery timeline of 161 days after order. The item must be produced according to TDP Rev A Gen 1 and comply with multiple Qualified Products Lists, including QPL-6363-5 and QPL-38999-99. Inspection and acceptance will occur at the point of origin, and the manufacturer's inspection system must meet SAE AS9003 or ISO 9001 standards. The contract imposes strict cybersecurity and export control requirements, including CMMC Level 2 certification and compliance with ITAR or EAR regulations. Access to technical data is limited to contractors with approved US/Canada Joint Certification Program certification and completed DLA export-control training. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and specific instruction SPI AK16577212. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. All quotes must be submitted via the DIBBS portal by November 9, 2026.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 336611
New
DIBBS
LADDER, DEBARKATION
Solicitation # SPE7M4-27-T-1892
Solicitation SPE7M4-27-T-1892, issued by the DLA Weapons Support Fluid Handling Division, is a request for quotations for one debarkation ladder, identified by NSN 2090016543153. The government identifies acceptable part numbers from Mazzella Lifting Technologies, Inc. (P/N 16955977) and Coast Marine & Industrial Supply Inc (P/N 4500468837). The required delivery date is October 16, 2027, with a delivery schedule of 340 days after order. Shipping is FOB Destination to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with palletization following DLA requirement RP001. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements. Invoicing must be processed electronically through the Wide Area WorkFlow system. Offerors must comply with the Buy American Act, the Berry Amendment, and DFARS cybersecurity reporting standards. Quotations were required to be submitted via the DIBBS portal by November 9, 2026, and the government will not evaluate items produced via additive manufacturing unless specifically authorized.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 336611
New
DIBBS
WINDSHIELD WIPER ASSEM
Solicitation # SPE7M4-27-T-1887
Solicitation SPE7M4-27-T-1887, issued by the DLA Weapons Support Fluid Handling Division, is a request for quotations for one windshield wiper assembly, NSN 2090-01-196-0072, part number KS-9180-G. The required delivery date is March 8, 2027, with a delivery timeline of 118 days after receipt of order. The item is to be delivered FOB Origin to DLA Distribution Warner Robins in Georgia, with both inspection and acceptance occurring at the destination. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 and RP001, with ASTM D3951 serving as the general packaging guideline. Technical and quality requirements are governed by the DLA Master List, and the contractor must ensure no mercury is intentionally added to the hardware. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses regarding cybersecurity, the Buy American Act, and the safeguarding of covered defense information.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 339999
New
DIBBS
Electrostatic Air Filter Supply
All Other Miscellaneous Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326199
New
DIBBS
Supply of MIL-PRF-23653D Plastic SheetsThis subcontract involves the manufacture and supply of 200 specialized plastic sheets measuring 12x12x.375 for prime contractors supporting the Department of Defense at the DDSP New Cumberland Facility. All materials must strictly conform to MIL-PRF-23653D and QPL-23653-31 standards, with packaging requirements adhering to MIL-STD-129 and RP001. The order consists of 200 sheets delivered in eight boxes on an FOB Origin basis. To be eligible, providers must hold QPL-23653-31 qualification and ensure full compliance with the Buy American Act. The project falls under NAICS code 326199 and is centered in New Cumberland, Pennsylvania. Interested parties must respond by November 23, 2026.
All Other Plastics Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333999
New
DIBBS
Centrifugal Fan Impeller SupplyThis subcontract, managed by the Department of Defense DDSP New Cumberland Facility, involves the supply of seven centrifugal fan impellers for prime contractors working on expeditionary systems projects. The required components must match NSN 4140016206010 and HDT Expeditionary Systems Inc Part Number 071-00087. All units must be packaged according to ASTM D3951 standards and labeled in compliance with MIL-STD-129. The procurement falls under NAICS code 333999, with performance taking place in New Cumberland. Interested parties must maintain current SAM representations and certifications to be eligible. The solicitation was posted on November 11, 2026, with a response deadline set for November 23, 2026.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333316
New
DIBBS
Adjustable Snap Gage Supplier
Photographic and Photocopying Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339112
New
DIBBS
Reflective Tape Supplier (Silver)
Surgical and Medical Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326291
New
DIBBS
Rubber Round Section SupplyThis subcontract involves the manufacture and supply of Rubber Round Sections, identified by NSN 9320121550824, to support prime contractors fulfilling Department of Defense supply contracts for the DDSP New Cumberland Facility. The contractor is responsible for producing items that strictly adhere to DLA Master List technical and quality requirements, while ensuring full compliance with the Buy American Act and Berry Amendment restrictions. Notably, the use of additive manufacturing is prohibited for this contract. Logistical requirements mandate that all items be packaged according to ASTM D3951, marked and labeled in accordance with MIL-STD-129, and palletized per RP001. The performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties must respond by November 23, 2026, under NAICS code 326291.
Rubber Product Manufacturing for Mechanical Use

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325412
New
DIBBS
Static Desiccant Manufacturer/Supplier
Pharmaceutical Preparation Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 423830
New
DIBBS
Supply of Fan Drive Belts (NSN 4210016185645)
Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334510
New
DIBBS
Borescope Equipment SupplierThis subcontract opportunity with the Department of Defense, specifically the DDSP New Cumberland Facility, seeks a supplier to provide high-precision borescope instruments for prime contractors supporting DLA Weapons Support contracts. The selected provider will be responsible for manufacturing or distributing optical inspection tools intended for use in Lead Lag Link Busing Inspection Kits, ensuring all delivered units are fully certified. The contractor must maintain strict adherence to the DLA Master List of Technical and Quality Requirements and comply with NAVSEA 5100-003D standards regarding mercury containment. This requirement falls under NAICS code 334510, with the place of performance located in New Cumberland, Pennsylvania. Interested parties must respond by November 23, 2026.
Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
Lead Lag Link Busing Inspection Kit SupplierThis subcontract involves the supply of 14 complete Lead Lag Link Busing Inspection Kits for prime contractors supporting DLA Weapons Support contracts. The supplier is responsible for assembling kits that meet NSN 6635-01-608-4820 specifications, which must include borescope systems. All deliverables must adhere to strict quality and packaging standards, specifically ASTM D3951 and DLA RP001 for packaging, MIL-STD-129 for marking, and MIL-STD-1916 or ASQ H1331 for sampling methods. The project is managed under the Department of Defense through the DDSP New Cumberland Facility, with performance taking place in New Cumberland, Pennsylvania. The opportunity is categorized under NAICS code 333998, with a response deadline set for November 23, 2026.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
Supply of Air Drier Parts Kits (NSN 4440-01-348-6358)
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332999
New
DIBBS
Industrial Fluid Cooler Baffle SupplyThis subcontract involves the manufacture or procurement of five industrial fluid cooler baffles designed to meet NSN 4420-0131-9790-4 specifications. The supplier is responsible for ensuring all units are packaged according to MIL-STD-2073-1E and RP001, and marked in compliance with MIL-STD-129. Additionally, the contractor must provide necessary hazard warning labels per 29 CFR 1910.1200 and Material Safety Data Sheets where applicable. The completed units must be delivered to the DLA Distribution DDSP New Cumberland Facility in New Cumberland. This requirement falls under NAICS code 332999 and supports prime contractors delivering on Department of Defense supply contracts. The response deadline for this opportunity is November 23, 2026.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 336611
New
Federal
Marine Boat Modification and Motor Installation Services
Fws Contracting Activity

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 336611
New
Federal
Marine Technology & Systems Integration
Department Of The Navy

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 336611
New
Federal
Supply of Non-Driving Vehicular Axles (UT70BA)
CG-SEA-C23

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 336611
New
Federal
USCGC Legare Pelican Hooks & Detachable links
Solicitation # 52000QR270000165
CG-SEA-C21

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 336611
New
Federal
EXHAUST RISER
Solicitation # 70ZU0327Q50472B00
CG-SEA-C23

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 336611
New
Federal
USS OKANE (DDG-77); 7MRB0604 Standalone
Solicitation # N5523627R0007
Southwest Regional Maintenance Center

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 336611
New
Federal
Dry Ice Cleaning and Inspection of Forward Ventilation System onboard Virginia Class Submarine
Solicitation # N6278927Q0003
Supply Of Shipbuilding Groton

POSTED

1 day ago

DEADLINE

in 2 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Get full access
Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS