This Subcontract opportunity from Texas was posted on August 16, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Raw Material & Component Supply (Aluminum/Copper/Fin Stock)

Closed

State & Local

Submission Closed08/21/2025, 02:00:00 PM CDT

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 331410

New

SLED

Ferrous Scrap Metal Hauling and Recycling

Administrative Svcs., Procurement Division

POSTED

DEADLINE

Titanium Alloy (Ti-6Al-4V) and Commercially Pure Titanium Raw Material

Solicitation # 80NSSC27949305Q

The National Aeronautics and Space Administration (NASA) Shared Services Center is soliciting a firm-fixed-price contract for the procurement, cutting, and delivery of titanium alloy (Ti-6Al-4V) and commercially pure (CP) titanium raw materials, including bar, plate, sheet, and tube stock. These materials are intended to support propulsion hardware fabrication at the Marshall Space Flight Center (MSFC) in Huntsville, Alabama. A critical requirement is that all materials must be of domestic United States production, covering the initial melt, remelts, and all mill processing. The contract specifies strict manufacturing constraints, prohibiting torch or plasma cutting to avoid heat-affected zones, and requires comprehensive documentation, including Certified Material Test Reports (CMTR) and Certificates of Conformance (CoC) to ensure heat and lot traceability. Award will be granted to the responsible offeror with the lowest price technically acceptable (LPTA) bid. To be deemed technically acceptable, contractors must provide evidence of an active quality management system such as ISO 9001 or AS9100, identify the producing mills, and confirm the ability to deliver all items within six weeks of award. Deliveries are FOB Destination, with payment terms set at NET 30. The period of performance runs from December 1, 2026, through January 31, 2027. Contractors must also comply with U.S. export control laws, including ITAR and EAR, and maintain SAM registration to be eligible for the award.

NASA Shared Services Center

POSTED

DEADLINE

Niobium (formerly Columbium) Raw Materials

Solicitation # 80NSSC27949192Q

The NASA Shared Services Center is soliciting quotes for the procurement of Niobium-1% Zirconium (Nb-1Zr) round bars for the Marshall Space Flight Center. The material must be supplied in the annealed condition in accordance with ASTM B392 Type 4 (UNS R04261). A critical requirement of this procurement is strict domestic production, mandating that the material be melted and produced within the United States. The contract will be awarded as a firm-fixed-price agreement to the responsible offeror providing the lowest price technically acceptable (LPTA) offer. Successful contractors must maintain a documented quality management system, such as ISO 9001 or AS9100, and provide comprehensive documentation for each heat or lot, including a Certified Material Test Report per EN 10204 3.1 and a Certificate of Conformance. All materials must be delivered FOB Destination to Huntsville, Alabama, within 12 weeks of contract award. Packaging must follow commercial best practices, requiring individual wrapping of bars and the use of non-contaminating marking methods, as stamping is strictly prohibited. Offerors must be registered in the System for Award Management and submit their quotes by November 18, 2026.

NASA Shared Services Center

POSTED

DEADLINE

Corrosion-Resistant Steel (CRES) Raw Materials

Solicitation # 80NSSC27949259Q

The National Aeronautics and Space Administration (NASA) Marshall Space Flight Center is soliciting the procurement of precipitation-hardening (PH) and austenitic corrosion-resistant steel (CRES) raw materials, including bar, sheet, foil, wire, and tube stock, to support propulsion hardware fabrication. This small business set-aside contract is a firm-fixed-price award based on the lowest price technically acceptable (LPTA) evaluation method. All materials must be of domestic United States production, new and unused, and traceable to the original producing mill. The period of performance is scheduled from December 1, 2026, through January 31, 2027, with a strict requirement that all materials be delivered FOB Destination within six weeks of the contract award. Contractors must maintain a documented quality management system such as ISO 9001 or AS9100 and ensure all test equipment is NIST traceable. Deliverables include a Certified Material Test Report, heat treatment certification, and a Certificate of Conformance for each shipment. Packaging must follow commercial best practices to prevent contamination and damage, with specific requirements for rigid backing for foils and sheets and capped ends for tubes. NASA will perform visual and dimensional receipt inspections at the Marshall Space Flight Center within ten business days of delivery, with the right to perform source inspections at the contractor's facility. Payment terms are NET 30.

NASA Shared Services Center

POSTED

DEADLINE

Supply of Raw Metallic Stock for Valve Stem AssembliesThis subcontract, managed by the Department of Defense through DLA DIST SAN JOAQUIN, involves the supply of raw metallic stock such as bars, billets, or forgings intended for valve stem assemblies. The materials must strictly adhere to the chemical and physical properties specified in Basic Drawing NR 80064 4384536 Revision N. To ensure full traceability and quality assurance, the provider is required to deliver certified stock accompanied by Material Test Reports and Certificates of Conformance. The performance of this contract is centered in Tracy, California, under NAICS code 331410. Interested parties must note the response deadline of November 20, 2026, following the posting date of November 9, 2026. This procurement supports prime contractors fulfilling DLA supply requirements for critical metallic components.

POSTED

DEADLINE

Supply of Seal Replacement Parts Kits (NSN 5330-01-4863835)This subcontract involves the supply of seal replacement parts kits for prime contractors supporting DLA supply contracts. The scope of work includes the manufacturing or sourcing of components for NSN 5330-01-4863835, the assembly of these components into kits, and the delivery of seven completed units. All shipments must adhere to strict packaging and marking standards, specifically MIL-STD-2073-1E, RP001, and MIL-STD-129. The contract is managed by the Department of Defense under the DLA Weapons Support Land Supplier Operations Vehicle Support agency, with performance taking place in Albany. Interested parties must respond by November 16, 2026, for this requirement categorized under NAICS code 331410.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Supply of Nickel Copper Alloy Raw MaterialThis subcontract through the Department of Defense DDSP New Cumberland Facility involves the sourcing and casting of certified nickel copper alloy raw material, specifically bar stock or blanks for part number 42931. The selected provider is responsible for delivering certified alloy stock to the manufacturer and must provide Material Test Reports to verify all physical properties and chemical compositions. Compliance is a critical component of this agreement, requiring strict adherence to the Buy American Act, the Berry Amendment, and Mercury-Free certifications. The performance of the contract will take place in New Cumberland, Pennsylvania, under NAICS code 331410.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Sleeve and Slide for Directional Control Valve SupplyThis subcontract involves the fabrication and supply of three sleeve and slide assemblies for directional control valves, specifically identified by NSN 4810006011860, to support prime contractors on Department of Defense projects. The work is managed by Depot Hill and will be performed at Hill AFB. The contractor is required to use precision machining to meet strict technical specifications. Quality assurance and logistics are governed by specific military standards, with sampling performed according to MIL-STD-1916 or ASQ H1331, Table 1, and labeling conducted per MIL-STD 129. The opportunity falls under NAICS code 331410, with a response deadline set for November 16, 2026.

POSTED

DEADLINE

Lead Sourcing with Full TraceabilityThe contract mandates the supply of lead with complete chain-of-custody documentation from the original source through every stage of processing to the final delivered product, ensuring end-to-end traceability that complies with FAR 52.209-1 requirements. All materials must meet stringent qualification standards for origin, handling, and documentation to guarantee integrity and accountability throughout the supply chain. The work is classified under NAICS code 331410 and is structured as a subcontract under the Defense Logistics Agency, which operates under the Department of Defense. Delivery and performance are required to align with the government’s specifications for traceability, though the exact place of performance and point of contact are not specified. The solicitation was posted on August 5, 2026, and the contract reference is linked to the DIBBS system under award number SPE7LX26D0066 with delivery order SPE7LX26F88T1.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Magnesium Alloy Extruded Round BarsThe contract entails the supply of certified AZ31B magnesium alloy extruded round bars with a diameter of 0.500 inches and lengths ranging from 8 to 12 feet, all of which must be chrome pickled to meet specified surface and dimensional requirements. These materials are subject to strict compliance with the National Stock Number NSN 9530006186951 and must adhere to Defense Logistics Agency traceability protocols to ensure full documentation and accountability throughout the supply chain. The material is classified under NAICS code 331410, indicating its origin within the primary metals manufacturing sector, and the contract is issued as a subcontract under the Department of Defense, managed by the Defense Logistics Agency. Performance obligations are governed by federal defense procurement standards, with delivery and certification requirements focused on quality, traceability, and regulatory alignment with military specifications.

Defense Logistics Agency

POSTED

DEADLINE

Copper and Brass Extrusions and Strip SupplyThe contract involves the supply of copper and brass in extruded shapes and strip forms, specifically intended for use in electrical, mechanical, and marine applications under the TLSP program. These materials are critical components for high-performance systems requiring superior conductivity, corrosion resistance, and mechanical durability. The procurement is structured as a subcontract and falls under NAICS code 331410, which designates the manufacturing of nonferrous metal rolling, drawing, and extruding. Performance of the work is tied to Philadelphia, indicating that production, logistics, or delivery activities will center in that location, though no additional geographic details are provided. The contract is managed under the Department of Defense through DLA Troop Support, reflecting its strategic importance to defense-related infrastructure and equipment. Although solicitation details and set-aside classifications are not specified, the posting date of June 23, 2026, suggests this is a forward-looking opportunity for qualified suppliers to engage with federal defense supply chains. The absence of a point of contact and full office address may imply that administrative coordination occurs through centralized DLA channels, and interested parties must access the full solicitation through the provided SAM.gov link for detailed submission requirements, delivery timelines, and technical specifications.

POSTED

DEADLINE

Battery Component Supply (Lead, Electrolyte, Separators)The contract obligates the supplier to provide critical raw materials including lead plates, sulfuric acid, polyethylene separators, and ABS casings for the production of military-grade batteries designated under NSN 6140014469506. These components are essential for assembling robust energy storage units intended for defense applications, requiring adherence to stringent military specifications for performance, durability, and safety under extreme operational conditions. The materials must meet exacting quality standards to ensure reliability in mission-critical environments. Issued as a subcontract under the Department of Defense through the Defense Logistics Agency, the contract falls under NAICS code 331410, indicating its alignment with secondary lead metabolism and battery manufacturing. Although the solicitation number and specific place of performance details are not provided, the contract is active as of June 3, 2026, and the work is managed through the DLA’s procurement systems. The supplier is expected to maintain consistent delivery schedules and quality assurance protocols to support the military’s battery supply chain without interruption.

Defense Logistics Agency

POSTED

5 months ago

DEADLINE

N/A

AI Contract Overview

This subcontract opportunity, issued by Dallas Area Rapid Transit in Texas, seeks a supplier for raw materials and components essential for radiator core manufacturing. The scope of work specifically includes the provision of aluminum sheets, copper tubes, and fin stock, all of which must strictly comply with ASTM standards. To optimize production efficiency, the contract allows for the possibility of kitting or just-in-time delivery schedules. The solicitation was posted on August 16, 2025, and requires responses to be submitted by the deadline of August 21, 2025. Classified under NAICS code 331410, this procurement focuses on securing high-quality industrial metals to support critical infrastructure maintenance or manufacturing needs.

General Info

Dallas Area Rapid Transit seeks ASTM compliant radiator materials by August 21, 2025.

Agency

Texas → Dallas Area Rapid Transit

NAICS

331410 - Nonferrous Metal (except Aluminum) Smelting and Refining

Place of Performance

TX, USA

Set-Aside

NONE

Documents

This scope was carved out of 2094166.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

RADIATOR (W/O TANK) - ref 2094166

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedAug 16

subcontract

Response DeadlineAug 21

Deadline has passed

Submission Closed

08/21/2025, 02:00:00 PM CDT

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyTexas → Dallas Area Rapid Transit

ContactsNo contacts available

OfficeN/A

Organization / AgencyTexas → Dallas Area Rapid Transit

Office AddressN/A

ContactsNo contact information available

Full Description

Supply of aluminum sheets, copper tubes, and fin stock for radiator core manufacturing, with compliance to ASTM standards and potential for just-in-time delivery or kitting.