Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Raw Material Supply for Aerospace-Grade Fasteners

Active

Federal

Response Deadline11/12/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of raw metal stock, specifically certified bars, rods, or wire, to support prime contractors on DLA Weapons Support ASC projects. The materials must meet the precise chemical and physical properties required for NSN 5306-00-508-6351 and are intended for use in aerospace-grade fasteners. Performance will take place at Robins Air Force Base, falling under NAICS code 331110. The supplier is required to ensure strict compliance with the Buy American Act and the Berry Amendment. To maintain full traceability and quality assurance, the contractor must provide comprehensive Material Test Reports and Certificates of Conformance with all deliveries. The solicitation was posted on November 4, 2026, with a response deadline of November 12, 2026.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

331110 - Iron and Steel Mills and Ferroalloy Manufacturing

Place of Performance

ROBINS A F B, GA, 31098-1887, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-27-T-8279.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BOLT, SHEAR

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 4

subcontract

Response DeadlineNov 12

Submission deadline

Response Deadline

11/12/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies raw metal stock for prime contractors on DLA Weapons Support ASC projects. Provides certified bars, rods, or wire meeting chemical and physical properties for NSN 5306-00-508-6351. Ensures compliance with the Buy American Act and the Berry Amendment. Provides Material Test Reports (MTRs) and Certificates of Conformance (CoC). Delivers certified raw material stock with full traceability.

Similar Contracts

Same NAICS industry code

ABS-Certified Structural Steel Plate ProductionThis subcontract involves the manufacture of four units of ordinary strength rolled Grade A structural steel plate for prime contractors supporting DLA Troop Support Construction and Equipment projects. The steel must be rolled to dimensions of 0.250 inches by 96 inches by 396 inches in strict accordance with MIL-S-22698C(2) and American Bureau of Shipping rules. Essential deliverables include physical markings on the material and the provision of Mill-Material Certification. The project requires formal endorsement from an ABS Surveyor and QSLM approval to ensure quality and compliance. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 331110, with performance taking place in Bremerton. The contract is managed through the Department of Defense for the Puget Sound agency.

POSTED

DEADLINE

Alloy Steel Bar Stock SupplyThis subcontract opportunity is for the supply of raw alloy steel bar stock to support prime contractors on DLA Weapons Support Land projects. The selected provider must deliver certified material that adheres to the specific metallurgical requirements of NSN 3040-00-877-3619 and provide accompanying Material Test Reports. Strict compliance with the Berry Amendment for domestic sourcing of specialty metals and the Buy American Act is mandatory for this requirement. Managed by the Department of Defense under the DLA Weapons Support Land Supplier Operations Vehicle Support agency, this opportunity is designated as a total set-aside for small businesses under NAICS code 331110. The solicitation was posted on November 4, 2026, with a response deadline of November 19, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 6 hours ago

DEADLINE

Specialized Metal Stock SupplyThis subcontract involves the supply of certified raw metal stock for prime contractors working on NAVSUP Weapons Systems Support projects for the Department of Defense. The selected provider is responsible for sourcing and delivering certified alloys and metals that strictly adhere to the material specifications outlined in NAVSEA drawings. Key compliance requirements include providing certification of the country of origin in accordance with Buy American and Trade Agreements-Basic standards, as well as the submission of Material Safety Data Sheets. This opportunity falls under NAICS code 331110 and requires the delivery of fully certified raw material stock.

Navsup Weapon Systems Support Mech

POSTED

about 6 hours ago

DEADLINE

in about 1 month

Solicitation # W911S227U0111

Solicitation W911S227U0111 is a Request for Quotation issued by the Department of Defense, specifically the W6QM Micc-Ft Drum, for the procurement of new steel plates. This acquisition is designated as a Total Small Business Set-Aside under NAICS code 331110. The requirement consists of four specific line items: two 4140 steel hot rolled plates conforming to ASTM A829 or SAE AMS6349, and two 1020 hot rolled steel plates conforming to ASTM-A830. The government will award the contract to the responsible offeror whose proposal is most advantageous, based on price and technical evaluations. Only new equipment will be accepted, and products from non-qualifying countries are prohibited. Key deliverables include the provision of a Certificate of Conformance and Certified Test Reports at the time of shipment. Additionally, any material containing multiple heat or lot numbers must be clearly identified and separately palletized. Delivery is specified as F.O.B. Destination, with a preferred timeline between 4 and 12 weeks, though offerors are encouraged to specify a delivery time within 30 days. All quotes must be submitted via the PIEE Solicitation module and must include a completed Attachment 1 regarding certifications and country of origin to avoid being rejected as nonresponsive. For those offering equal products, detailed descriptive literature and a clear explanation of any modifications required to meet salient characteristics are mandatory.

W6QM Micc-Ft Drum

POSTED

about 6 hours ago

DEADLINE

Corrosion Resistant Steel Sheet SupplyThis subcontract, managed by Construction & Equipment MRO SVC I for the Department of Defense, involves the supply of 6,000 corrosion-resistant, cold-rolled, and solution heat-treated steel sheets. These materials are intended for prime contractors fulfilling DLA Troop Support supply contracts. Each sheet must measure 36 by 96 inches with a thickness of 0.187 inches, ensuring full compliance with the DLA Master List of Technical and Quality Requirements. The contract mandates strict adherence to RP001 packaging and MIL-STD-129 marking standards. Performance for this requirement is centered in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 16, 2026, under NAICS code 331110.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Grade AH-36 Hot Rolled Structural Angle SupplyThis subcontract involves the supply of 357 feet of Grade AH-36 hot rolled steel structural angles for the DLA Weapons Support Nuclear Reactor Program. The required materials are L-shaped equal leg angles with a 0.250 inch flange thickness and 4.000 inches width and height, provided in lengths ranging from 20 to 30 feet. All supplies must conform to MIL-S-22698 and ASTM-A6 Table A2.7 standards. To ensure quality and compliance, production must be carried out by an ABS-approved mill with QSLD certification for FSGs 95 and 96. The project is managed under NAICS code 331110 for the Department of Defense, with the place of performance located at Robins Air Force Base. Responses for this requirement are due by November 16, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Hot Rolled Steel Sheet SupplierThis subcontract involves the supply of 34 commercial quality hot rolled steel sheets with milled edges to support prime contractors delivering for DLA Troop Support, Construction and Equipment Metals. The required specifications for the steel sheets are a thickness between 0.1116 and 0.1276 inches, a width of 48 inches, and a length of 96 inches. The contract is managed under the Department of Defense through the Albany Transportation Officer, with performance taking place in Albany. All administrative requirements, including the submission of receiving reports and invoices, must be processed through the Wide Area Workflow system. The response deadline for this opportunity is November 16, 2026.

ALBANY TRANSPORTATION OFFICER

POSTED

DEADLINE

Supply of Cold Drawn Round Steel Bars (1018/1020)This subcontract through the Department of Defense DDSP New Cumberland Facility involves the supply of cold drawn round steel bars to support DLA Troop Support Construction and Equipment Metals contracts. The required materials consist of 1018/1020 steel composition bars with a diameter of 0.500 inches and lengths ranging from 10 to 12 feet. The contractor is responsible for delivering physical metal bars that adhere to strict dimensional and material specifications. A critical requirement of the contract is the continuous marking of all units, which must include the contract delivery order, NSN, specification number, grade, alloy, and manufacturer heat or lot numbers. Performance will take place in New Cumberland, Pennsylvania.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Supply of AH-36 High-Strength Round Steel BarsThis subcontract, managed by Construction & Equipment MRO SVC I for the Department of Defense, involves the supply of high-strength Grade AH-36 round steel bars to support DLA Troop Support supply contracts. The required materials must have a 1.375 inch outer diameter, lengths ranging from 10 to 12 feet, and a reference weight of 5.0 LB/FT. The total delivery requirement consists of 39 linear feet of steel bars. A critical requirement of this agreement is the provision of mandatory Mill-Material Certification for every shipment to verify the quality and grade of the steel. The place of performance for this contract is located in New Cumberland, Pennsylvania. The solicitation was posted on November 3, 2026, with a response deadline of November 16, 2026.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

High-Temperature Superalloy SupplyThis subcontract involves the supply of raw high-temperature superalloy materials, including billets, forgings, or castings, for prime contractors working on DLA Weapons Support ASC projects. All materials must strictly adhere to TDP Rev B Gen 2 specifications and be accompanied by full material certifications, traceability documentation, and material test reports. Managed by the Department of Defense under NAICS code 331110, the contract requires the supplier to hold JCP Certification to access necessary export-controlled technical data. The solicitation was posted on November 3, 2026, with a response deadline of November 13, 2026, for performance located in zip code 32212-0103.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Annealed Steel Flat Bars (4140 HR)This subcontract involves the supply of 4140 HR annealed steel flat bars for prime contractors working on DLA Troop Support Construction and Equipment projects. The required materials must have a thickness of 1.000 inch, a width of 6.000 inches, and lengths ranging from 8 to 12 feet, with a total delivery requirement of 27.000 feet. The project is managed by the Department of Defense through the DDSP New Cumberland Facility. To be eligible, suppliers must be listed on the Qualified Suppliers List for Distributors and ensure all materials comply with the DLA Master List Technical and Quality Requirements. The performance of this contract will take place in New Cumberland, Pennsylvania. Interested parties must respond by November 16, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Supply of Steel Comp XM-13 Metal BarsThis subcontract involves the supply of 43 linear feet of specialized STEEL COMP XM-13 metal bars to support prime contractors for DLA Troop Support Construction and Equipment contracts. The material must feature a hot finish and flat profile with a thickness of 0.500 inches and lengths ranging from 10 to 12 feet. All supplies must adhere to NSN 9510-00-448-1394 specifications and maintain a reference weight of 5.100 LB/FT. The contract is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance taking place in New Cumberland, Pennsylvania. Interested parties must respond by November 16, 2026, under NAICS code 331110.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

MIL-SPEC Packaging and Fragile Logistics ServicesThis subcontract for MIL-SPEC Packaging and Fragile Logistics Services involves providing specialized packaging for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work focuses on the secure packaging of optical components in strict accordance with MIL-STD-2073-1E and RP001 standards, requiring the use of MIL-SPEC anti-static, shock-absorbent, or moisture-barrier materials and the application of fragile marking code 01. The contractor is responsible for coordinating the delivery of shipment-ready, compliant packages to the USS George Washington (CVN 73) at FPO AP 96607. This requirement falls under NAICS code 488410 and is managed by the Department of Defense.

Motor Vehicle Towing

POSTED

DEADLINE

Precision Optical Lens Fabrication (NSN 6210-01-460-6632)This subcontract involves the manufacture and supply of a single precision light lens for the DLA Weapons Support ASC Commodities Division under NSN 6210-01-460-6632. The contractor is required to fabricate the optical lens to exact government specifications using precision grinding and polishing techniques, with a strict prohibition on the use of additive manufacturing. To qualify, the provider must maintain SAE AS9003 or ISO 9001 quality systems and hold certification from the US/Canada Joint Certification Program. Additionally, the contractor must ensure full compliance with ITAR or EAR export controls. The project is categorized under NAICS code 332994 and requires performance at FPO 96607.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

DEADLINE

Special Purpose Electrical Cable Assembly SupplierThis subcontract opportunity is for a supplier to provide four units of special purpose electrical cable assemblies, specifically NSN 5995017291083, to prime contractors supporting the DLA Weapons Support ASC Commodities Division. The selected provider must manufacture or source these assemblies in strict accordance with the DLA Master List of Technical and Quality Requirements and adhere to DFARS Buy American standards. To be eligible, the supplier must maintain a quality system compliant with either SAE AS9003 or ISO 9001. The solicitation was posted on November 4, 2026, with a response deadline of November 12, 2026, falling under NAICS code 334418.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

MIL-SPEC Packaging and International Freight ForwardingThis subcontract involves providing specialized military packaging, marking, and international freight forwarding services for the DLA Weapons Support ASC Commodities Division. The contractor is responsible for preparing a cable assembly according to MIL-STD-2073-1E and MIL-STD-129 standards, ensuring all items are correctly marked and packaged for secure transport. The scope of work includes coordinating FOB Origin transportation and managing all necessary customs documentation for final delivery to Spangdahlem Air Base in Germany. To be eligible, the provider must have experience with WAWF invoicing and the capability to manage logistics through to the destination inspection point.

Freight Transportation Arrangement

POSTED

DEADLINE

Manufacture and Supply of RF Cable Assembly (P/N 583R094H44)This subcontract involves the manufacture and supply of one completed and tested Radio Frequency Cable Assembly for the Department of Defense, specifically supporting DLA Weapons Support ASC projects. The contractor is responsible for fabricating the assembly according to Northrop Grumman part number 583R094H44 specifications and adhering to the DLA Master List of Technical and Quality Requirements RA001. Quality assurance is a critical component of the agreement, requiring sampling and inspection performed in accordance with MIL-STD-1916 or ASQ H1331. Additionally, the contractor must maintain a CMMC Level 2 self-assessment to meet security requirements. The opportunity is categorized under NAICS code 335999 and was posted by the DLA Weapons Support ASC Commodities Division.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

Electrical Component & Wire SupplyThis subcontract for Electrical Component and Wire Supply supports the DLA Weapons Support ASC Commodities Division within the Department of Defense. The scope of work involves sourcing and delivering raw materials and specialized components, specifically Mil-Spec wire, terminals, connectors, and heat shrink tubing, in strict accordance with Drawing 53711 8690753 Revision A. All materials must be delivered to the prime manufacturer and accompanied by Certificates of Conformance to ensure quality and specification adherence. A critical requirement of this agreement is full compliance with the Buy American Act for all sourced components. The project is categorized under NAICS code 335999, with the place of performance located in Hampton, Virginia. Interested parties should note the response deadline of November 12, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

Custom Wiring Harness FabricationThis subcontract involves the fabrication of a custom wiring harness, specifically the Bran model with NSN 5995-01-690-7408, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work requires the assembly of the harness according to Basic Drawing 53711 8690753 Revision A, encompassing all necessary wire cutting, stripping, crimping, and electrical continuity testing to ensure full functionality. The project mandates strict adherence to quality and security standards, including MIL-STD-2073-1E, MIL-STD-129, and NIST SP 800-171. The final deliverable consists of one completed, packaged, and marked wiring harness to be performed in Hampton. Interested parties must respond by November 12, 2026, under NAICS code 335931.

Current-Carrying Wiring Device Manufacturing

POSTED

DEADLINE

Supply of Power Cable Assemblies (NSN 5995-01-729-2713)This subcontract involves the supply of four electrical power cable assemblies for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The contractor is responsible for manufacturing or sourcing assemblies that strictly adhere to NSN 5995-01-729-2713 specifications. Quality assurance must be maintained through sampling and inspection conducted per MIL-STD-1916 or ASQ H1331, with all product markings applied in accordance with MIL-STD-129. The agreement requires full compliance with DFARS 252.225-7001 regulations. This procurement falls under NAICS code 334418 and is managed by the Department of Defense. Interested parties must note the response deadline of November 12, 2026.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

Special Purpose Electrical Cable Assembly SupplierThis subcontract, managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division, requires the supply of two special purpose electrical cable assemblies for prime contractors. The supplier is responsible for the manufacture or procurement of L3Harris part number 12282-0710-A006, ensuring that all units undergo quality assurance sampling in accordance with MIL-STD-1916 or ASQ H1331 standards. The contractor must provide all necessary documentation for covered defense telecommunications equipment as mandated by FAR requirements. Performance for this contract is located at Schofield Barracks, and the procurement falls under NAICS code 334418.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

Manufacturer of Thrust Washer Bearings (NSN 3120-01-484-0447)This subcontract involves the manufacture and supply of 490 Thrust Washer Bearings under NSN 3120-01-484-0447 for prime contractors supporting DLA Weapons Support ASC projects. The selected provider must ensure all items are precision manufactured, marked according to RQ017 standards, and packaged in compliance with ASTM D3951 and MIL-STD-129. The final products are to be delivered FOB Origin to New Cumberland, Pennsylvania. To qualify for this contract, the manufacturer must maintain either SAE AS9003 or ISO 9001 quality systems and hold CMMC Level 2 certification. The opportunity is categorized under NAICS code 333241 and is managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division.

Food Product Machinery Manufacturing

POSTED

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract involves providing specialized military-grade packaging and marking services for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work focuses on the processing of critical bearing components, specifically 26 units of bearing retainers and rollers, ensuring full compliance with MIL-DTL-197M, MIL-STD-2073-1E, and MIL-STD-129 standards. The contractor is responsible for utilizing specialized marking equipment to meet regulatory requirements and managing shipping documentation through the Wide Area Workflow system. All completed units are to be delivered to Norfolk, Virginia. The project falls under NAICS code 488510 and is managed under the Department of Defense.

Freight Transportation Arrangement

POSTED

DEADLINE

Precision Manufacturing of Bearing Retainers and RollersThis subcontract involves the precision manufacturing of 26 bearing retainers and rollers for the DLA Weapons Support ASC Commodities Division. The components must be produced in strict accordance with drawings 76301 ST4M151, 76301 ST4M162, and 98752 200415485, while adhering to quality assurance reference QAP 13873 QAP-B02. Performance of the contract will take place in Norfolk. Eligible contractors must possess precision machining equipment and hold either SAE AS9003 or ISO 9001 certification. Additionally, the provider must be certified under the US/Canada Joint Certification Program. The solicitation was posted on November 4, 2026, with a response deadline of November 12, 2026.

Mechanical Power Transmission Equipment Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS