This Government Contract opportunity from Department Of Defense was posted on August 31, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Raw Material Supply for Panel Assembly

Closed

Federal

Submission Closed09/11/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 331221

New

DIBBS

Aerospace Grade Raw Material Supply (Aircraft Skin Stock)This subcontract involves the supply of raw aerospace-grade aluminum or titanium alloys for prime contractors supporting DLA Weapons Support ASC projects. The provider is responsible for sourcing and certifying materials that strictly adhere to Boeing P/N 527-13401-2 metallurgical specifications, delivering the certified raw material stock directly to the fabricator. To ensure quality and regulatory adherence, the supplier must provide Mill Test Reports for full traceability and maintain compliance with the Buy American Act and DFARS cybersecurity standards. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, the performance of this contract is centered at Tinker AFB. The opportunity is categorized under NAICS code 331221, with a response deadline set for November 12, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Supply of Aluminum Alloy Alclad Metal SheetsThis subcontract involves the supply of three specialized Aluminum Alloy Alclad metal sheets for prime contractors working on DLA Troop Support Construction and Equipment projects. The sheets must be manufactured to precise dimensions of 0.100 inches in thickness, 60.00 inches in width, and 144.00 inches in length, featuring 0.0025 inches of cladding on both sides. All materials must strictly conform to NSN 9535008905488 and all applicable DLA Technical and Quality Requirements. The contract is issued under the Department of Defense for Depot Oklahoma, with the place of performance located at Tinker AFB. Interested parties must respond by November 16, 2026, regarding this requirement categorized under NAICS code 331221.

POSTED

DEADLINE

Supplier of Electromagnetic Relays (NSN 5945-01-517-9146)This subcontract involves the supply of one electromagnetic relay, identified by NSN 5945-01-517-9146, to support DLA Weapons Support projects for the USS DWIGHT D EISENHOWER CVN 69. The supplier must ensure the components adhere to NAVSEA 5100-003D mercury restrictions and comply with specific technical standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and IPC/JEDEC J-STD-609 for lead finish labeling. Managed by the Department of Defense under the DLA Weapons Support Active Devices Division, the contract requires delivery within 88 days after the order is placed. The performance location is designated as FPO 09532, and the procurement falls under NAICS code 331221.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Zee Extrusion 60-11478 SupplierThis subcontract involves the supply of Zee Extrusions for prime contractors supporting Department of Defense projects through the DLA Fleet Readiness Center. The scope of work requires the manufacture of 2,016 inches of aluminum extrusion for profile 60-11478, utilizing precision tooling and adhering strictly to SAE AMS-QQ-A-200/3 REV. A(2024-T3511) standards. The supplier is responsible for rigorous quality control, including sampling and inspection conducted per MIL-STD-1916 or ASQ H1331. Final deliverables must be packaged and marked according to ASTM D3951, RP001, and MIL-STD-129 specifications and must be accompanied by a Certificate of Quality Conformance. The project falls under NAICS code 331221 and is performed in the 28533-0021 zip code area.

DLA FLEET READINESS CENTER DLA PSC

POSTED

DEADLINE

Supply of Aluminum Alloy 2024 & T-8511 Extruded Flat BarThis subcontract involves the supply of extruded aluminum alloy 2024 and T-8511 flat bars for prime contractors working on DLA and Army aerospace projects. The required material must adhere to SAE AMS-QQ-A-200C and ASTM B666/B666M-20 standards, specifically featuring dimensions of 3.500 inches in thickness and 7.250 inches in width. The contract covers the delivery of metal bar NSN 9530005036712 and mandates the use of precision cutting equipment and the provision of Mill Test Reports to certify full material compliance. Managed by the Defense Logistics Agency under the Department of Defense, the project falls under NAICS code 331221. Performance for this contract is located in Minneapolis, Minnesota. Interested parties must note the response deadline of November 16, 2026, to ensure all technical and certification requirements are met for the procurement of these specialized aerospace components.

Defense Logistics Agency

POSTED

DEADLINE

WIRE ROPE ASSEMBLY, SIN

Solicitation # SPE4A5-27-T-2227

Solicitation SPE4A5-27-T-2227 is a request for quotations from the DLA Weapons Support ASC Supplier Oper OEM Division for the procurement of 117 units of a single leg wire rope assembly, identified by NSN 4010-00-475-9058. This item is designated as a critical application item and must be manufactured in accordance with TDP Rev B Gen 2 and basic drawing 96124 744075. The required delivery date is May 31, 2027, with a need ship date of May 3, 2027. Delivery is set as FOB Origin under the First Destination Transportation program, with the shipping destination located at the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict quality and technical compliance, requiring the manufacturer's inspection system to meet SAE AS9003 or ISO 9001 standards. Sampling must follow MIL-STD-1916 or ASQ H1331, and the use of additive manufacturing is strictly prohibited. Packaging and marking must adhere to RP001 and MIL-STD-129, while payment processing is required through the Wide Area WorkFlow system. Key regulatory requirements include CMMC Level 2 self-assessment, adherence to the Berry Amendment and Buy American Act, and compliance with DFARS cybersecurity and hazardous material labeling standards. Evaluation preferences are provided for certified HUBZone small business concerns.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Solicitation # SPE8E4-27-T-0236

This solicitation, issued by DLA Troop Support Construction and Equipment (Metals), is a total small business set-aside for the procurement of four units of structural ordinary strength rolled steel plate, Grade A. The material must be 0.250 inches thick, 96 inches wide, and 396 inches long, conforming to MIL-S-22698C(2) and American Bureau of Shipping (ABS) rules. A critical requirement for acceptance is the inclusion of an ABS Surveyor's endorsement on the certificates, and the material must be produced by an approved steel mill. The procurement is subject to the Qualified Suppliers List for Distributors (QSLD) and Manufacturers (QSLM) requirements, meaning only approved suppliers are eligible for award unless a deviation is explicitly indicated. The contract mandates strict quality and marking standards, including the requirement for a Certificate of Quality Compliance (Mill-Material Certification) with every shipment. Marking must comply with MIL-STD-129 and include specific details such as the DLA contract delivery order number, NSN, and manufacturer's heat and lot number; specifically, material manufactured to MIL-S-22698 must be marked with the letters AB. Packaging and preservation must adhere to ASTM A700 and RP001, with inspection and acceptance occurring at the point of origin. Additionally, the contractor must comply with cybersecurity requirements, including CMMC Level 2 self-assessment and DFARS 252.204-7012 for safeguarding covered defense information. Delivery is required within 20 days after order, with the final destination being DLA Distribution Puget Sound in Bremerton, Washington.

POSTED

DEADLINE

Supply of Annealed 4140 Steel PlatesThis subcontract, issued by the Department of Defense via W6QM Micc-Ft Drum, requires the procurement of six new annealed 4140 steel plates for prime contractors supporting US Army RIA JMTC projects. Each plate must measure 2.0 by 48 by 96 inches and strictly conform to ASTM A829/A82 standards. To ensure quality and verification of salient characteristics, the supplier must provide all necessary descriptive literature, illustrations, or drawings. The contract is designated as a total Small Business Set Aside under NAICS code 331221. It explicitly prohibits the delivery of used or remanufactured products, requiring all materials to be new and delivered directly to the government site. Interested parties must respond by November 13, 2026.

POSTED

DEADLINE

Supply of Steel Comp XM-13 Round BarsThis subcontract, managed by the Department of Defense through DLA DIST SAN JOAQUIN, requires the supply of 26 linear feet of centerless ground round metal bars manufactured from STEEL COMP XM-13. The bars must have a diameter of 2.250 inches and be provided in whole foot lengths of 10, 11, or 12 feet. All materials must strictly adhere to NSN 9510004867745 specifications and comply with DFARS 252.225-7001 Buy American standards. The performance of this contract will take place in Tracy, California. It is important to note that additive manufacturing is prohibited unless explicit approval is granted by the ESA. Interested parties should note the response deadline of November 16, 2026, for this procurement under NAICS code 331221.

POSTED

DEADLINE

Supply of Type 304 Corrosion Resistant Steel PlatesThis subcontract, issued by the DLA Weapons Support Nuclear Reactor Program under the Department of Defense, requires the supply of 45 precision-cut Type 304 corrosion resistant steel plates. The plates must be hot rolled and annealed with a pickled or sand blasted surface finish, measuring 0.250 inches in thickness, 24 inches in width, and 96 inches in length. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 331221, with performance taking place in Tracy, California. Compliance with strict regulatory standards is mandatory, including DFARS Buy American requirements, Hexavalent Chromium prohibitions, and MIL-STD-129 marking specifications. Interested parties must submit their responses by November 16, 2026, to support prime contractors fulfilling DLA supply contracts.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Supply of HY-100 High-Yield Strength Steel PlateThis subcontract, issued by the Department of Defense under the DLA Weapons Support Maritime Supply Chain, requires the supply of a single high-strength, quenched and tempered Grade HY-100 hot rolled steel plate. The specified material must be 1 inch thick, 96 inches wide, and 29 feet long with sheared edges and a primer coating. To fulfill these requirements, the provider must possess industrial shearing equipment and specialized quenching and tempering facilities. The contract is designated as a Total Small Business Set-Aside under NAICS code 331221, with performance taking place in Portsmouth. Essential deliverables include the metal plate along with Mill-Material Certification and CoQC documentation provided via DD Form 1423s. Responses to this solicitation are due by November 16, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Supply of Chrome-Nickel-Moly (Alloy 4340) Steel BarsThis subcontract, managed by Construction & Equipment MRO SVC I for the Department of Defense, requires the supply of 107 linear feet of cold-finished, annealed Chrome-Nickel-Moly Alloy 4340 round steel bars. The materials must have a diameter of 1.750 inches and be provided in whole foot lengths of 10, 11, or 12 feet. Performance will take place in Cherry Point, North Carolina, supporting prime contractors on DLA Troop Support projects. The contractor is responsible for ensuring all materials are preserved according to ASTM A700 standards and feature legible stamping or adhesive labeling as specified. Additionally, Mill-Material Certification must accompany every shipment to verify quality and compliance. The solicitation was posted on November 3, 2026, with a response deadline of November 16, 2026.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

1 day ago

DEADLINE

in 12 days

AI Contract Overview

This subcontract involves the supply of certified raw materials to prime contractors responsible for manufacturing Panel Assemblies for DLA Troop Support Construction and Equipment. The supplier is required to source and deliver materials that strictly adhere to the specifications outlined in Drawing 81337 5-4-4657. To ensure compliance with military and industrial standards, the provider must furnish Material Test Reports and Certificates of Conformance upon delivery to the fabricator. Managed under the Department of Defense through Depot Hill, the contract is categorized under NAICS code 331221. Performance of the contract will take place at Hill AFB, zip code 84056-5734. The solicitation was posted on August 31, 2026, with a response deadline set for September 11, 2026.

General Info

Supply certified raw materials for DLA Panel Assemblies at Hill AFB per specifications.

Agency

Department Of Defense → DEPOT HILL

NAICS

331221 - Rolled Steel Shape Manufacturing

Place of Performance

HILL AFB, UT, 84056-5734, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE8E5-26-T-4105.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PANEL ASSEMBLY

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedAug 31

subcontract

Response DeadlineSep 11

Deadline has passed

Submission Closed

09/11/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → DEPOT HILL

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DEPOT HILL

Office AddressN/A

ContactsNo contact information available

Full Description

Supplies certified raw materials for prime contractors manufacturing Panel Assemblies for DLA Troop Support Construction & Equipment. Sources and delivers materials meeting specifications in Drawing 81337 5-4-4657. Provides Material Test Reports (MTRs) and Certificates of Conformance (CoC) to ensure military or industrial standards are met. Delivers certified raw materials to the fabricator.