Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

RCACS Workplace Furniture

Active
W2037-27-0485/AInternational

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Department of National Defence is soliciting offers for the purchase, delivery, and installation of Category 2 work surface products for the Royal Canadian Armoured Corps School. This requirement is issued under the General Stream of the Workspaces Supply Arrangement E60PQ-140003. The successful contractor must provide new materials that conform to technical specifications and provide a list of available finishes at no additional cost. All deliverables must be received and installed at CFB Gagetown in Oromocto, New Brunswick, by March 31, 2027, with the overall contract period extending to April 30, 2027. Award selection is based on the lowest evaluated price among offers that meet all mandatory technical criteria. The contractor is required to adhere to environmentally preferable packaging standards, ensuring materials are reusable, returnable, or recyclable. Following installation, a joint walk-through with the Project Authority is required to identify any deficiencies, which must be resolved within specific timeframes before final sign-off. Payment for undisputed invoices will be made within 30 days of receipt. While there are no specific security clearances required for the contract, all personnel must comply with site health, safety, and security regulations.

General Info

DND seeks a contractor to supply and install work surfaces at CFB Gagetown.

Agency

Government of Canada → Department of National Defence

NAICS

337214 - Office Furniture (except Wood) Manufacturing

Place of Performance

Canada, New Brunswick, CAN

Set-Aside

NONE

Documents

3

RCACS Category 2 Work Surface Products Bid Schedule

XLSX, High priority: read this first5 pages · specifications
High

RCACS Workplace Furniture/ CIC - V2037-27-0485/A

PDF, High priority: read this first48 pages · rfq
High

Solicitation W2037-26-0429/A - RCACS Workplace Furniture

PDF, High priority: read this first44 pages · rfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyGovernment of Canada → Department of National Defence
Contacts1 person available
OfficeN/A
Organization / AgencyGovernment of Canada → Department of National Defence
Office AddressN/A
Contacts
Aaron PoundContracting Authority
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
1. This NPP is issued pursuant to PWGSC Supply Arrangement (SA) # E60PQ-140003/D and covers a requirement from the following Product Category(ies) of the SA: - Product Category 2 - Work Surface Products; 2. Department of National Defence has a requirement for the purchase, delivery and installation of office furniture to Oromocto, NB by 31 March 2027. 3. This NPP covers a requirement to be solicited amongst the General Stream of Suppliers (SA holders).

Similar Contracts

Same NAICS industry code

NAICS: 337214
New
Federal
Request for Quote for Office Furniture and Installation Fresno, CA USDA Location
Solicitation # 12639527Q0007
Solicitation 12639527Q0007 is a combined synopsis and request for quotation issued by the USDA Agricultural Marketing Service for the procurement, delivery, assembly, and installation of new office furniture at their West Region Branch in Fresno, California. The project covers approximately 1,305.69 square feet, including four offices, a conference room, and a reception/flex/printing room. Required items include height-adjustable L-shaped standing desks, office chairs, a conference table, storage cabinets, bookcases, and a mobile room divider. The contractor is responsible for delivery, assembly, and the removal of all packaging debris, while building staff will handle the disposal of old furniture. No electrical, IT, or telecommunications work is included in this scope. This acquisition is a total small business set-aside under NAICS code 337214. Award will be based on a fair and reasonable price determination per FAR 12.204, as well as an evaluation of relevant experience and past performance from the last five years. All work must be completed within 90 calendar days of the contract award. Invoices must be submitted electronically through the Invoice Processing Platform. Quotations are due by October 23, 2026, and must be submitted via email with the solicitation name and number in the subject line.
Mrpbs Minneapolis Mn

POSTED

about 21 hours ago

DEADLINE

in 6 days
View Details
NAICS: 337214
New
International
Procurement of Office Furniture for the Valcartier Military Police Detachment
Solicitation # W0106-26E016/A
The Department of National Defence is soliciting offers for the supply, delivery, and installation of office furniture for the Valcartier Military Police Detachment located in Courcelette, Quebec. This procurement, conducted under Supply Arrangement E60PQ-140003/PQ, includes the dismantling and reinstallation of existing cubicle partitions and walls. The successful contractor must ensure that at least one installation team member is proficient in one of Canada's official languages and that all products are installed according to manufacturer specifications. Delivery and installation are expected to occur within a standard lead time of 8 to 10 weeks, with a final completion deadline of February 26, 2027. Award decisions will be based on the lowest total evaluated bid price, encompassing product, delivery, and installation costs. To be eligible, contractors must maintain a valid Designated Organization Screening and ensure all personnel accessing the site hold Reliability Status. The contract emphasizes green procurement, requiring reusable, returnable, or recyclable packaging materials in alignment with the Government of Canada's Greening Government Strategy. All offers must be submitted via the SAP Business Network by November 3, 2026, and must include the required Offer Submission and Offeror Declaration forms.
Department of National Defence

POSTED

1 day ago

DEADLINE

in 17 days
View Details
NAICS: 337214
New
Federal
Request for Information (RFI)
Solicitation # N6600126Q6015
NIWC Pacific is conducting market research via a Request for Information (RFI) for the potential acquisition of office furniture, including delivery, assembly, and professional installation at a government installation in San Diego, California. The scope involves providing modular prefabricated workstations and freestanding furniture across buildings A33, A35, and A40. Key requirements include workstations of at least 48 square feet with adjustable height surfaces and specific cable management to maintain a 39-inch separation between SECRET and UNCLASS networks. All furniture must meet commercial grade ANSI/BIFMA standards, utilize high-pressure laminates for desktops and grade 3 fabric, and include steel frames. Additionally, the government requires a minimum 12-year warranty and compliance with the Buy American Act, Trade Agreements Act, and specific Unified Facilities Criteria for interior design. This notice is for market research purposes only and does not constitute a formal solicitation or a commitment to award a contract. Interested firms must respond by October 25, 2026, providing their company name, UEI, business size, and the names of up to two attendees for an escorted, unclassified site visit. Respondents must also identify any potential logistical constraints and confirm if the requirements can be met using commercial furniture and standard installation services. Evaluation criteria for the future procurement will focus on design appeal, quality, space utilization, and the maximization of requirements. All upholstered items must be PFOS and PFOA free.
Niwc Pacific

POSTED

2 days ago

DEADLINE

in 8 days
View Details
NAICS: 337214
New
International
Office Furniture: Categories 1, 2,3,4,5 and 6 Jasper National Park
Solicitation # 5P420-26-0157A
The Parks Canada Agency is soliciting bids for the purchase, delivery, and installation of office furniture for Jasper National Park in Alberta. This requirement, identified by solicitation number 5P420-26-0157A, includes a wide range of items across six product categories: workstation systems, work surface products, filing and storage products, phone booths and pods, ancillary products, and collaborative products. The procurement also encompasses certain items that fall outside the standard supply arrangement. This opportunity is issued under PWGSC Supply Arrangement E60PQ-140003/D and is open to suppliers within the PSIB stream. Interested parties must submit their responses by the deadline of October 28, 2026. All selected furniture must be delivered and installed in Jasper, Alberta, no later than February 12, 2027.
Parks Canada Agency

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 337214
New
International
Department of Justice Canada - CAT 1,2,3,5,6 Office Furniture
Solicitation # 1000037089
The Department of Justice Canada is soliciting offers for the purchase, delivery, and installation of office furniture to be delivered to 284 Wellington Street, Ottawa, Ontario, by January 25, 2027. This requirement is issued under the PSIB stream of the Workspaces Supply Arrangement (SA) # E60PQ-140003/D and is restricted to SA holders. The scope of procurement covers five product categories: workstation systems, work surface products, filing and storage products, ancillary products, and collaborative products. Key technical requirements include the provision of at least three electrical receptacles per workstation, acoustic tested privacy screens, and compliance with ANSI/BIFMA X5.5 and UL 962 standards. Additionally, materials must contribute to LEED credits using FSC-certified wood cores and GreenGuard Gold certified low-emitting adhesives. The contract will be awarded to the compliant offer with the lowest evaluated price. Delivery and installation are expected within a standard lead time of 8 to 10 weeks, with work performed during normal business hours of 08:00 to 17:00. The contractor is responsible for unpacking and inspecting goods at the installation site, with the Project Authority managing the deficiency list and final sign-off. Packaging must be reusable, returnable, or recyclable in alignment with the Government of Canada's Green Procurement policy, with specific exceptions for packaging tape and specialized technical packaging. Payment will be processed via direct deposit, and the contractor is responsible for determining their own insurance requirements.
Department of Justice

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 337214
New
SLED
MEB 6TH & 7TH FLOOR VERSTEEL BRAND FURNITURE PURCHASE CONTRACT
Solicitation # 003002
LSU Health Sciences Center - New Orleans is soliciting bids for the purchase, supply, inside delivery, and installation of Versteel Brand Furniture for the 6th and 7th floors of the Medical Education Building located at 1901 Perdido St, New Orleans, Louisiana. This is an all-or-none, brand-specific procurement that prohibits substitutions. The required items include 104 conference chairs, 16 large conference tables, 8 phone booth tables, 6 small conference tables (Type 1), and 2 small conference tables (Type 2). The selected vendor is responsible for conducting site visits to provide layout drawings, coordinating power requirements, and ensuring all furniture fits the designated spaces. Deliverables must include assembly, setting in place, and the removal of all packing materials and trash, with a preferred delivery timeline of six weeks from the issuance of the purchase order. The contract will be awarded to the lowest responsible and responsive bidder. Bidders must provide complete pricing including FOB Destination freight and maintain bid validity for at least 30 days. Requirements for submission include a sealed envelope containing a signed certification statement, an indemnification agreement, a certificate of liability insurance, and a minimum three-year warranty against defects. The contract mandates compliance with OSHA standards, the Americans with Disabilities Act, and various Louisiana state statutes, including preferences for products manufactured or assembled in Louisiana. Additionally, the agreement incorporates strict non-discrimination and affirmative action clauses, as well as a ten-year prohibition on organizational conflicts of interest.
LSU Health Sciences Center - New Orleans

POSTED

2 days ago

DEADLINE

in 24 days
View Details
NAICS: 337214
New
Federal
Office systems furniture
US Geological Survey

POSTED

3 days ago

DEADLINE

N/A
View Details
NAICS: 337214
New
International
Office Furniture Supplier (Categories 2, 3, and 5)This subcontract involves the supply of office furniture for prime contractors working on Department of National Defence projects. The scope of work specifically focuses on providing height-adjustable work surfaces and items categorized under Categories 3 and 5. The supplier is responsible for sourcing products according to Product Generator specifications, providing all necessary technical data sheets, and ensuring that all items comply with the Government of Canada green procurement standards. Logistically, the supplier must deliver all new office furniture to the designated staging area at the Valcartier Support Base in Québec. The contract is associated with NAICS code 337214 and is managed under the authority of the Government of Canada.
Department of National Defence

POSTED

3 days ago

DEADLINE

in 17 days
View Details
NAICS: 337214
New
SLED
American Fork Police Department Remodel
Solicitation # PD2026009
American Fork City is soliciting proposals from qualified furniture manufacturers and office furniture dealers for the purchase, delivery, and installation of furniture, fixtures, and equipment for the Police Department Remodel located at 75 E 80 N, American Fork, Utah. The scope of work encompasses office furnishings, open area workstations, conference tables, seating, and kitchen or breakroom equipment. Selected vendors must provide durable, functional, and aesthetically pleasing items that meet the city's design criteria, while noting that the delivery location lacks a loading dock. Bidders are required to demonstrate professional qualifications, necessary licensing, and relevant experience. The procurement process includes a facility tour on October 20th, with a deadline for clarification questions on October 26th and final proposals due by 2:00 PM on October 29, 2026. The project is tentatively scheduled to begin in December 2026.
Utah

POSTED

4 days ago

DEADLINE

in 12 days
View Details
NAICS: 337214
New
SLED
Privacy Pod Equipment SupplierThis subcontract agreement establishes a partnership for the supply of new privacy pods intended for prime contractors working on Texas Department of Transportation San Antonio District HQ projects. The supplier is responsible for manufacturing pods with a minimum footprint of 60 by 48 inches, featuring integrated power outlets, USB-A and USB-C ports, and three adjustable ventilation fans. To ensure safety and usability, all units must include safety decals compliant with ANSI 535.4 and comprehensive English operational manuals that include illustrated parts lists. The contract requires that all pods be delivered fully assembled and adjusted on a FOB Destination basis. This procurement opportunity is listed under NAICS code 337214, with a response deadline set for November 3, 2026.
Texas Department Of Transportation

POSTED

4 days ago

DEADLINE

in 18 days
View Details
NAICS: 337214
New
SLED
Privacy Pods for the San Antonio District HQ
Solicitation # 601320000071896
The Texas Department of Transportation (TxDOT) is soliciting bids for the provision and installation of privacy pods at the San Antonio District Headquarters, Area Office, and Maintenance Facility. The procurement is conducted as an Invitation for Bid (IFB) under solicitation number 601320000071896, with a response deadline of November 3, 2026. The required pods must be equipped with wheels, a power cord not exceeding 125V, a desk approximately 30 inches wide by 20 inches long by 29 inches high, and a built-in chair with commercial-grade upholstery. Each unit must be delivered with English operational and service manuals and comply with all federal and state of Texas safety, health, and lighting standards, including ANSI 535.4 for safety plaques and decals. Award decisions will be based on best value, with purchase price and compliance with specifications serving as the primary considerations. Delivery timeframes and warranties will also be reviewed. To be considered, respondents must pass an initial screening involving a documentation review and a vendor performance rating of A, B, or C in the CPA Vendor Performance Tracking System. All goods must be shipped FOB Destination, and the vendor is responsible for all shipping and handling costs. Required submission documentation includes an execution of response, a preferences schedule, a completed bid table, a child support obligation schedule, and detailed compliance documentation. The selected vendor must maintain comprehensive insurance coverage, including professional liability, employer's liability, commercial automobile liability, and umbrella/excess liability, with minimum limits ranging from 600,000 to 1,000,000 dollars. Payments will be made via direct deposit or warrant following an acceptance inspection and performance testing period that will not exceed 15 working days after delivery and installation. All materials must be of high quality and in current production; used or reconditioned materials are strictly prohibited.
Texas Department Of Transportation

POSTED

4 days ago

DEADLINE

in 18 days
View Details
NAICS: 337214
New
International
EF926-261591 - PSIB - Purchase under the Furniture SA for category 6 for the New Montreal Justice Complex LOT 3
Solicitation # WS5917863319
The Department of Public Works and Government Services is issuing a request for proposal for the purchase, delivery, and installation of office furniture for the New Montreal Justice Complex LOT 3. This solicitation, identified by number WS5917863319, falls under supply arrangement E60PQ-140003/D and specifically pertains to category 6 furniture requirements. The project will be executed in Montreal, Quebec, Canada. Interested parties must submit their responses by the deadline of October 22, 2026. Corine Lavoie serves as the primary contracting authority for this federal government procurement process.
Department of Public Works and Government Services

POSTED

4 days ago

DEADLINE

in 5 days
View Details

More opportunities from Government of Canada → Department of National Defence

Same awarding agency

NAICS: 484220
New
International
Specialized Delivery to CFB GagetownThis subcontract involves the specialized transportation of 148 office work surfaces for prime contractors working on Department of National Defence projects. The selected provider will haul the furniture from the manufacturer or warehouse to Building J7, Door 31, at the Royal Canadian Armoured Corps School located within CFB Gagetown, New Brunswick. All deliveries must be completed during normal business hours by March 31, 2027. To fulfill the requirements, the contractor must provide freight trucks specifically suitable for furniture transport and ensure all drivers possess the necessary security clearances for entry into CFB Gagetown. This opportunity was posted on October 16, 2026, with a response deadline of October 27, 2026.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 238990
New
International
Work Surface Installation ServicesThis subcontract for Work Surface Installation Services involves the assembly and installation of office furniture for prime contractors on Department of National Defence projects at the Royal Canadian Armoured Corps School in New Brunswick. The scope of work requires the contractor to unload and transport 148 work surfaces from Building J7, Door 31, to their final designated locations, followed by full assembly, placement, and the coordination of site inspections with the Project Authority. The successful contractor must ensure full compliance with CFB Gagetown site access requirements to deliver fully installed work surfaces. This opportunity is categorized under NAICS code 238990 and is associated with the Government of Canada. The response deadline for this requirement is October 27, 2026.
All Other Specialty Trade Contractors

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 336612
New
International
Supply of Fixed Height Work SurfacesThis subcontract involves the supply of 148 fixed-height work surfaces for prime contractors working on Department of National Defence projects at the Royal Canadian Armoured Corps School. All provided units must adhere to the technical specifications outlined in Annex A and the Category 2 Product Builder, and must be approved under the Workspaces Supply Arrangement E60PQ-140003. The contract requires the delivery of these compliant work surfaces to CFB Gagetown in New Brunswick, Canada. The solicitation was posted on October 16, 2026, with a response deadline of October 27, 2026.
Boat Building

POSTED

1 day ago

DEADLINE

in 10 days
View Details
New
International
VALVE PARTS
Solicitation # W8482-275593/A
The Department of National Defence is soliciting offers for the procurement of various valve parts to be delivered to CFB Halifax, Nova Scotia, and CFB Esquimalt, British Columbia. The requirement includes butterfly valves with Monel discs from Bray Controls Canada Ltd, stop-check valves and special shaped actuator valve diaphragms from Montreal Bronze Ltd, and saddle valves from Swagelok Co. Bids will be assessed on a Delivery Duty Paid basis, and the award will be based on the lowest evaluated price on an item-by-item basis, with the possibility of multiple contracts being awarded. The contract is governed by the Defence Production Act and includes specific requirements for priority ratings for both U.S. and Canadian-based contractors. Quality standards are stringent, requiring compliance with ISO 9001:2015 and specific packaging and marking standards such as MIL-STD-2073 for U.S. contractors and NATO standards for EU contractors. Any proposed equivalent products must meet Specification D-03-003-007/SG-000 Grade 1 Type A and provide certification of shock testing. Offerors must submit a technical offer and a financial offer, including the Offeror Submission Details in both spreadsheet and PDF formats, by the deadline of November 16, 2026.

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 424350
New
International
MP4240 Catalyst BIB Pants
Solicitation # W8482-275455/A
The Department of National Defence is soliciting offers for the procurement of MP4240 Catalyst BIB Pants, specifically designed for the Canadian Forces to provide hypothermia and environmental protection in maritime settings. The requirement consists of 1,000 total units of buoyant, black men's bib overalls from Mustang Survival Corp, distributed across sizes Small through XXL. These items are to be delivered in equal quantities to CFB Halifax and CFB Esquimalt on a Delivery Duty Paid basis. The selection process is based on the lowest evaluated price among compliant offers that meet all mandatory technical criteria, including the provision of correct part numbers and NCAGE codes. Contractors must adhere to strict quality assurance standards, including ISO 9001 compliance and specific packaging and marking regulations based on their region of operation, such as MIL-STD-2073 for U.S. contractors or NATO TL8100-0100 for European Union contractors. Special requirements include mandatory registration or exemption under the Controlled Goods Program and the provision of bilingual Safety Data Sheets for any hazardous materials. Bidders proposing equivalent products must provide full technical specifications and guarantee that third-party warranties for existing equipment will not be adversely affected. Invoices are to be submitted to Maritime Forces Atlantic and CFB Esquimalt for payment via direct deposit or wire transfer within 30 days of receipt.
Clothing and Clothing Accessories Merchant Wholesalers

POSTED

1 day ago

DEADLINE

in 9 days
View Details
New
International
Refrigeration Clip-On Repair & overhaul
Solicitation # W8486-249130

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 336340
New
International
LIGHT SUPPORT VEHICLE WHEELED/
Solicitation # W8486-270934/A
The Department of National Defence has issued solicitation W8486-270934/A for the procurement of various spare parts for the Light Support Vehicle Wheeled (LSVW). The requirement consists of 26 line items, including map pockets, propeller shafts, side shaft assemblies, ball joints, safety belts, rotary switches, brake proportion valves, brake shoe sets, brake discs, pressure transmitters, and metallic treads. These items are to be delivered to 7 CFSD in Edmonton, Alberta, and 25 CFSD in Montreal, Quebec, with a requested delivery deadline of January 2027. All prices must be quoted as Delivery Duty Paid (DDP). The contract will be awarded to the compliant offer with the lowest evaluated price on an aggregate basis per NATO Stock Number. Bidders must submit their proposals electronically by October 16, 2026, divided into technical, financial, and administrative sections. All supplied materials must be new and conform to the latest applicable drawings and specifications. Strict packaging and marking standards are required, including specific Canadian Forces packaging specifications and the use of standard wood pallets for shipments exceeding certain size or weight thresholds. Additionally, the successful contractor must adhere to confidentiality and non-disclosure agreements and certify that the work is not produced using forced labour.
Motor Vehicle Brake System Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
New
International
NISO for PROTRACTOR, RECTANGULAR
Solicitation # W8486-260619/A
The Department of National Defence is establishing a Standing Offer for the procurement of rectangular protractors, with an initial term of two firm years and three optional extension years. The contract is conditionally set aside under the Procurement Strategy for Indigenous Business and will be awarded to the compliant offer with the lowest evaluated price. Deliveries are requested via call-ups to 25 CFSD Montreal and 7 CFSD Edmonton, with an estimated annual quantity of up to 2,000 units per location. Goods must be delivered Delivery Duty Paid within 90 days of a call-up. The contractor is expected to maintain a quality management system based on ISO 9001:2015 and adhere to strict packaging and marking standards. All wood packaging must comply with ISPM15 standards, and materials must be reusable, returnable, or recyclable in accordance with the Policy on Green Procurement and the Ocean Plastics Charter. Each item must be clearly stamped or etched with the manufacturer's name and part number. Payment will be made via direct deposit, EDI, or wire transfer within 30 days of receiving an undisputed invoice. To access the Technical Data Package, offerors must sign a Non-Disclosure Agreement and provide their security clearance profile.

POSTED

1 day ago

DEADLINE

in 20 days
View Details
NAICS: 325120
New
International
TERMINATION,SHIELD,ELECTRICAL CONNECTOR & CALIBRATING GAS MIXTURE
Solicitation # W8482-275727/A
The Department of National Defence is soliciting offers for the procurement of electrical connector shield terminations and calibrating gas mixtures to support the Damage Control Monitoring and Alarm System for HFX Class Ships. The requirement consists of 80 electrical connector shield terminations (Part Number TCFS-24-62C-020-100 CH) and 30 bottles of calibrating gas mixture (Part Number AMC-CK2600-02), consisting of 2.5 percent methane balanced with air. Deliveries are split between CFB Halifax and CFB Esquimalt, with bids assessed on a Delivery Duty Paid basis. The contract will be awarded to the compliant offer with the lowest evaluated price on an item-by-item basis, and multiple contracts may be awarded. Bidders must provide the specific Part Number and NCAGE for all items; those proposing equivalent products must provide full specifications and guarantee that third-party warranties will not be adversely affected. Strict adherence to NATO Marking and Packaging Standards or US MIL-STD-2073/129 is required, and hazardous materials must comply with the Transportation of Dangerous Goods Act and the Hazardous Products Act, including the provision of bilingual Safety Data Sheets. Proposals must be submitted via ePost or fax by October 6, 2026, and must include a technical proposal, a financial offer based on the Annex Basis of Payment, and completed submission and declaration forms. The resulting contract will be governed by standard terms and conditions covering performance, warranties, and security safeguarding for classified materials. Undisputed invoices will be paid within 30 days following the completion of work and submission of a packing slip or waybill to the designated payment offices in Halifax and Victoria.
Industrial Gas Manufacturing

POSTED

1 day ago

DEADLINE

in 3 days
View Details
New
International
WIRE SHELL,HYDROPHONE
Solicitation # W8482-275764/A
The Department of National Defence is soliciting offers for the procurement of hydrophone wire shells, specifically part number 1210C0030 from Pelmor Laboratories, Inc. The requirement consists of two primary delivery lots: 600 units to be delivered to CFB Halifax and 300 units to CFB Esquimalt. While the specified part is preferred, bidders may propose equivalent or substitute products provided they include the brand name, model, part number, and NCAGE. The contract is awarded based on the lowest evaluated price among compliant offers on an item-by-item basis. Deliveries must be shipped Delivery Duty Paid (DDP) and adhere to strict packaging and marking standards based on the contractor's location, utilizing MIL-STD-2073 for US firms, D-LM-008-001/SF-001 for Canadian firms, and NATO TL8100-0100 for EU firms. All items must be bar-coded using UCC/EAN-128 symbology. The contract includes rigorous security and legal requirements, including compliance with the Controlled Goods Program, anti-forced labour laws, and security clearances for NATO RESTRICTED materials. Payment is processed within 30 days of receiving a compliant invoice, which must be supported by a packing slip or waybill and sent to the respective accounts payable offices in Halifax or Victoria.

POSTED

1 day ago

DEADLINE

in 17 days
View Details
New
International
Senior Learning Designer Training Plan (TP) and Master Lesson Plans (MLPs)
Solicitation # W3915-260198B

POSTED

1 day ago

DEADLINE

in 20 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS