Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

This Solicitation opportunity from Illinois was posted on December 3, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Rebid D1, D2 Pressure Washers

Closed
25-494DOT-FINAD-B-49440State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 423850
New
SLED
Commercial Washing Machines - ISVH Pocatello
Solicitation # 1487
The State of Idaho, through the Division of Veterans Services, is soliciting quotes for the procurement, delivery, and installation of three new, unused, commercial-grade washing machines for the Idaho State Veterans Home in Pocatello. The equipment must be of current production, as refurbished or discontinued models are prohibited, and must meet specific technical requirements including a usable capacity of 60–80 lbs, extraction of 200–250 G, and a spin speed of 590–600 RPM. All units must be UL or ETL listed, CSA certified for gas components, and meet ANSI safety standards. The three units must fit within a 158-inch wide space. The scope of work includes full installation and an optional trade-in of three existing units on an as-is, where-is basis. Award will be granted to the responsive and responsible bidder offering the lowest total cost, factoring in any trade-in value. Bidders must be authorized dealers of the equipment offered. Delivery and installation are required within 30 days after receipt of order on an FOB Destination basis. The contractor is an independent contractor responsible for all labor, taxes, and insurance. Required certifications include a boycott of Israel certification for contracts exceeding $100,000 with 10 or more employees, and a certification that the company is not owned or operated by the government of China. There is no set-aside status specified for this solicitation.
State of Idaho

POSTED

2 days ago

DEADLINE

in 12 days
NAICS: 423850
New
SLED
Child Nutrition Kitchen Equipment Replacement – Combination Ovens, Refrigerators, and Heated Cabinets
Solicitation # CSP #F1093-26
Lewisville Independent School District is soliciting Competitive Sealed Proposals under CSP #F1093-26 for the turnkey replacement of child nutrition kitchen equipment. The procurement includes one single-section pass-through refrigerator, two double-section pass-through heated cabinets, one single-section reach-in heated cabinet, and three double-stacked electric combination oven sets. All products must be factory new with full factory warranties and meet specific certifications, including cETLus, ENERGY STAR, and applicable sanitation standards. The scope of work is comprehensive, requiring vendors to provide all-inclusive pricing that covers equipment, freight, inside delivery, installation, necessary electrical modifications, and the removal and disposal of existing equipment. The contract is governed by the laws of the State of Texas and must comply with 2 CFR Part 200, USDA, and TDA requirements for the use of federal funds, including a Buy American provision. Proposals will be evaluated based on best overall value rather than lowest price alone, with scoring weights assigned to purchase price, quality of goods, vendor reputation, and the extent to which needs are met. Required documentation for submission includes manufacturer cut sheets, a Public Records Agreement, a Vendor Insurance Acknowledgment, and a Pre-Employment or Pre-Service Affidavit. The term of the resulting contract is one year with no successive renewals. There is no set-aside status for this solicitation.
Lewisville ISD

POSTED

2 days ago

DEADLINE

in about 2 months
NAICS: 423850
New
SLED
RFP-CUS-270000000369-1 | FOOD SERVICE EQUIPMENT
Solicitation # RFP-CUS-270000000369
Chesaning Union School in Michigan is soliciting proposals for the purchase and installation of food service equipment at Chesaning Middle School. The project scope includes the delivery, assembly, and installation of a refrigerated self-serve display case (Structural Concepts Model B47R), a heated floor model display case (Structural Concepts Model B3632H), and an OPTEX RCTD-20U Wireless 2000 kit. The selected dealer must manage all logistics, coordinate with relevant trades, and provide on-site dumpsters for the disposal of crates and debris. Additionally, the contractor is required to provide digital operating manuals and conduct factory-authorized training for staff upon project completion. Proposals are due by December 8, 2026, at 1:00 PM EST and must be delivered via mail or courier, as emailed bids are not accepted. The contract is expected to be awarded by December 14, 2026, with a required installation window between March 26 and April 2, 2027. Evaluation factors include the bidder's competency, responsibility, experience, and reputation. Payment will be issued upon project completion with net forty-five terms. There is no specified set-aside status for this solicitation. All equipment must comply with OSHA standards and the Buy American Provision associated with the National School Lunch Program and School Breakfast Program.
Chesaning Union School

POSTED

2 days ago

DEADLINE

in 16 days
NAICS: 423850
New
DIBBS
HOSE ASSEMBLY, NONMETAL
Solicitation # SPE4A6-27-T-124C
This solicitation, issued by the DLA Weapons Support ASC Commodities Division, is for the procurement of two nonmetallic fire fighting hose assemblies. The items are designated as critical application items, specifically Northrop Grumman Systems Corporation part number 1977747-8 (NSN 4210-01-354-9014). The contract specifies a delivery timeline of 171 days after order, with an original required delivery date of August 15, 2028, and a need ship date of May 18, 2027. Delivery is FOB Destination, with the shipping point located at the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. There is no set-aside used for this procurement. Technical requirements include strict adherence to DLA master lists for quality and technical standards, with sampling methods governed by MIL-STD-1916 or ASQ H1331. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with specific protocols for hazardous materials under IP025 and the Hazard Communication Standard. The contract mandates destination inspection and acceptance per FAR 52.246-2. Key regulatory clauses include the Buy American and Balance of Payments Program, NIST SP 800-171 assessment requirements, and various DFARS deviations regarding cybersecurity and hazardous material identification. Item Unique Identification is not required for this order.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

3 days ago

DEADLINE

in 5 days
NAICS: 423850
New
SLED
Statewide Industrial Laundry Equipment, Qualified Vendor List (QVL)
Solicitation # STATE 0000000627SL
The State of Missouri, through the Office of Administration, Division of Purchasing, is establishing a Qualified Vendor List (QVL) for the purchase of industrial laundry equipment and repair services for various state agencies. This is a preferred use contract rather than an exclusive arrangement, meaning agencies may seek alternate services if it is in the state's best interest. The state intends to award contracts to all vendors determined to be responsive, responsible, and reliable. Award evaluations include a compliance review and a bonus point preference for commitments to nonprofit organizations for the blind or sheltered workshops, with a maximum of 15 points awarded for commitments of 6% or more of the total contract value. Contractors are required to provide new equipment and must submit firm, fixed pricing via individual quote requests. All pricing must be FOB Destination, Freight Prepaid and Allowed. Key obligations include providing manufacturer manuals at no cost and submitting utility requirements for site preparation within five days of an award notification. Contractors must also submit quarterly administrative fee reports and usage reports to the Division of Purchasing, with the administrative fee calculated as 1% of total payments received. Legal requirements include compliance with the Domestic Product Procurement Act, the Americans with Disabilities Act, and the Anti-Discrimination Against Israel Act. Payments are generally due within 30 calendar days of receiving a valid invoice.
PROC OA DIVISION OF PURCHASING PROCUREMENTS

POSTED

4 days ago

DEADLINE

in 15 days

AI Contract Overview

Show more

The Illinois Department of Transportation (IDOT) has issued solicitation number 26-494DOT-FINAD-B-49440 for the procurement and installation of new heavy-duty pressure washers for Districts 1 and 2. This Invitation for Bid (IFB) requires bidders to provide newly manufactured stationary cold, hot water, and steam high-pressure washer units, with strict exclusion of remanufactured equipment. The contract encompasses comprehensive responsibilities including delivery, site preparation, installation, utility connections, and removal of existing washers at designated IDOT maintenance yards in Illinois. Equipment and installation must comply with detailed specifications covering pump flow and pressure, electric motor and burner features, solution dispensing, and cabinet construction, while conforming to relevant state and local building codes, safety standards, and manufacturer guidelines. Warranties must be fully transferable to the State, with provisions ensuring repair, replacement, or correction of defects within one year post-delivery. Bidders are required to submit their offers electronically by January 30, 2026, via the BidBuy portal, including mandatory documentation such as Vendor Disclosure or IPG Active Registered Vendor Disclosure forms, Offer to the State of Illinois, and executed contract documents. The solicitation follows a Lowest Price Technically Acceptable (LPTA) award methodology, meaning the contract will be awarded to the responsive and responsible bidder offering the lowest price. The contract term is initially 12 months with potential renewal up to ten years, and deliveries are FOB destination to specified IDOT facilities. Invoicing instructions designate submission to specified IDOT financial offices, with payment contingent upon successful inspection and acceptance at delivery sites. The contract also contains special provisions covering background checks, personnel conduct, confidentiality in compliance with FOIA, and tax credit eligibility for hiring veterans or formerly incarcerated individuals. Compliance with all applicable laws and regulations, including prevailing wage requirements where applicable, is mandatory, and audits may be conducted to ensure adherence to contract terms.

General Info

IDOT contract for new heavy-duty washers installation, delivery, compliance, warranties, 12-month term, lowest price award.

Documents

6
DOCX, High priority: read this first5 pages · specifications
High
DOCX, High priority: read this first10 pages · ifb
High
DOCX, High priority: read this first19 pages · contract-document
High
DOCX, High priority: read this first21 pages · vendor-disclosure
High
PDF, High priority: read this firstitb
High
DOCX, Low priorityvendor-disclosure
Low

Read all 6 documents

Every page of every file, in your free workspace.

Read the documents

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

View Full Breakdown

This one is closed. Find the next one like it.

Open contracts like this one, right now:

  • Commercial Dryer - Idaho State Veterans Home - PocatelloOpen now, due in 13 days
  • Commercial Washing Machines - ISVH PocatelloOpen now, due in 13 days
See open contracts like this

Ask CLEATUS

I've read this contract. Ask me anything.

Timeline

PhaseClosed
Posted

Solicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyIllinois Department of Transportation
Contacts1 person available
OfficeN/A

Full Description

Show more
D1 and D2 are seeking to purchase and have installed new Heavy Duty Pressure Washers.

Get AI-powered intelligence on the opportunities still open

Every solicitation package arrives shredded into a compliance breakdown and matched to your past performance, with incumbent history and alerts on amendments and award.

Miguel
Hillary
Keith Deutsch
Christine

Join 900+ contractors already using CLEATUS