Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Recessed Washer Supply and Compliance

Active

Federal

Response Deadline08/07/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the procurement, manufacturing, or sourcing of recessed washers that fully comply with the National Stock Number 5310004529781 specification, ensuring all products meet rigorous military and federal quality standards. Suppliers must provide compliant packaging, accurate labeling, and submit Safety Data Sheets in accordance with applicable federal and Department of Defense regulations. The work is to be performed at the designated place of performance in Corpus Christi, Texas, with a zip code of 78406, indicating that delivery or production must align with this location. The solicitation is classified as a subcontract under NAICS code 332313, which pertains to bolt, screw, and rivet manufacturing. Bids must be submitted by the deadline of August 7, 2026, and the opportunity was posted on July 30, 2026, through the DLA DIBBS platform under the agency name ASC SUPPLIER OPER OEM DIVISION, part of the Department of Defense.

General Info

Procure recessed washers per NSN 5310004529781, deliver to Corpus Christi, TX, by August 7, 2026.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

332313 - Plate Work ManufacturingView NAICS

Place of Performance

CORPUS CHRISTI, TX, 78406, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 30

subcontract

Response DeadlineAug 7

Submission deadline

Response Deadline

08/07/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Procure, manufacture, or source recessed washers to NSN 5310004529781 specification, with compliant packaging, labeling, and SDS submission per federal and military standards.

Similar Contracts

Same NAICS industry code

Galvanized Steel Conductor Dead End Plate

Solicitation # Z4911

The contract solicits Galvanized Steel Conductor Dead End Plates compliant with the NES Specification LSK-1116, requiring the plates to be manufactured precisely according to the referenced detail design. Only approved manufacturers are eligible, including REINKE, SFORMS, THOMAS-B, UNIVERSA, HUGHESB, DIS-TRAN, DIXIE, and FALCONS, ensuring all submitted products meet the required quality and dimensional standards. The solicitation is issued by Nashville Electric Service under solicitation number Z4911 for use within Tennessee, with performance localized in Nashville. The solicitation was posted on July 31, 2026, and responses are due by August 5, 2026, at 7:00 PM Eastern Time. The procurement is classified under a SLED organization type and is managed by the agency’s procurement office in Nashville, Tennessee. All inquiries and submissions must be directed to the primary point of contact, Bailey Allen, via email at allen1@nespower.com or phone at 615-747-3724. Bidders must access the official portal at the provided UI link to submit proposals and review any additional documentation required for compliance.

Nashville Electric Service

POSTED

DEADLINE

Precision Fastener Supply (Machine Bolts)The contract entails the supply of 17 units of a specific machine bolt identified by NSN 5306016844706, manufactured to meet rigorous military specifications. Each unit must be delivered with packaging, preservation, and labeling fully compliant with ASTM D3951 and MIL-STD-129 standards, ensuring durability, traceability, and readiness for military logistics and deployment. The requirement is issued under a subcontract format by the ASC Commodities Division of the Department of Defense, with performance designated to occur in Tracy, California, at zip code 95304-5000. The solicitation, classified under NAICS code 332313, was posted on July 30, 2026, and responses are due by August 7, 2026, indicating a focused eight-day window for qualification and submission. The contract emphasizes strict adherence to defense-grade quality control and documentation procedures to ensure compatibility with existing military supply chains.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Commercial Off-the-Shelf (COTS) Hardware Supply – Flat Washer (NSN: 5310014473311)The contract calls for the supply of 41 flat washers meeting the military NSN specification 5310014473311, ensuring full compliance with government standards for material, dimensional accuracy, and performance. The seller is responsible for proper packaging and marking in accordance with military requirements, and all items must be delivered under FOB Origin terms, meaning the buyer assumes all transportation costs and risks once the goods leave the seller’s facility. The solicitation is classified as a subcontract under NAICS code 332313, targeting commercial off-the-shelf hardware, and is managed by the ASC Commodities Division of the Department of Defense. The place of performance is specified as New Cumberland, PA, with a posting date of July 30, 2026, and a firm response deadline of August 7, 2026, requiring timely submission of proposals to meet procurement timelines.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Metal Plate Manufacturing & SupplyThe contract seeks the manufacture and supply of defense-grade metal plates measuring 0.375 inches thick and 36 by 36 inches, manufactured to exacting specifications under SAE AMS5862M and SAE AMS2807C standards. All materials must be sourced exclusively from suppliers listed on the DLA QSLD approved vendor list, ensuring compliance with rigorous defense procurement protocols. Full material traceability is mandatory, requiring documented mill certifications for every batch to verify composition, heat treatment, and mechanical properties. The work is structured as a subcontract under the NAICS code 332313, managed by the Department of Defense under the Construction & Equipment MRO SVC I contract vehicle. Proposals must be submitted by August 6, 2026, with no set-aside designation applied, and performance is expected to align with federal defense logistics requirements. All parties must adhere to the stringent quality and documentation standards inherent in military-grade metal fabrication.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Hex Nut Supply – Plain Hexagon Nuts (NSN: 5310006067350)The contract requires the supply of 22 plain hexagon nuts identified by NSN 5310006067350, manufactured to meet military specifications without any fabrication or assembly work. All units must be packaged in strict accordance with MIL-STD-2073-1E and marked following MIL-STD-129 standards to ensure compliance with Department of Defense logistics and identification protocols. The requirement is issued under subcontract type, with the place of performance centered in San Diego, California, at ZIP code 92136-3581. The solicitation was posted on July 30, 2026, and responses are due by August 7, 2026, with the procurement managed by the ASC Commodities Division under the Department of Defense, utilizing NAICS code 332313 for fastener manufacturing.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Fastener Manufacturing – Flat WashersThe contract entails the manufacture and delivery of five flat washers identified by NSN 5310-01-517-3756 and part number 5/16FLATW, manufactured to meet all Department of Defense technical, quality, packaging, and labeling requirements. The work is classified as a subcontract under NAICS code 332313, with performance required at the specified location in New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation was posted on July 30, 2026, and responses must be submitted by August 7, 2026, with all deliverables expected to conform to stringent DoD standards for defense-grade components. The contracting activity is managed under the ASC Commodities Division of the Department of Defense, and the full details are accessible via the provided DIBBS link.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Fastener Supply – Grooved Pin RivetsThe contract involves the supply of 360 grooved pin rivets identified by NSN 5320014232381, specifically for military use with full compliance in packaging, labeling, and delivery standards. All items must meet stringent defense specifications to ensure compatibility and reliability in operational environments. The requirement is issued under a subcontract classification by the ASC Commodities Division of the Department of Defense, with performance expected at Anniston, Alabama, zip code 36201-4199. The solicitation was posted on July 30, 2026, and responses are due by August 7, 2026, indicating a tight turnaround for qualified suppliers to submit proposals. The NAICS code 332313 confirms the focus on forged, stamped, and rolled metal product manufacturing, aligning with precision fastener production capabilities. Compliance with military-grade requirements and adherence to the designated delivery location are critical for successful bid consideration.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Fastener ManufacturingThe contract entails the manufacture of four plain octagon nuts identified by NSN 5310007088738, requiring strict adherence to military specifications for material composition, dimensional tolerances, and marking as defined in RQ017. Quality assurance must comply with MIL-STD-1916, ensuring consistent conformance to defense-grade standards throughout production and inspection. The work is to be performed at a designated location in New Cumberland, Pennsylvania, with delivery expected within the timeframe specified by the solicitation. This is a subcontract under the Department of Defense, awarded by the ASC Commodities Division, with the North American Industry Classification System code 332313 indicating precision fastener manufacturing. The opportunity was posted on July 30, 2026, and responses are due by August 7, 2026. The contract is not subject to any specific set-aside classification and remains open to qualified subcontractors capable of meeting the technical and quality requirements without deviation. All proposals must be submitted through the official DIBBS platform linked in the solicitation details.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Hex Cap Screw SupplyThe contract requires the supply and delivery of 141 units of hex cap screws with NSN 5305015775868, to be furnished under FOB origin terms, meaning the buyer assumes responsibility for the goods once they leave the seller’s facility. All items must be packaged and marked in strict compliance with MIL-STD-129 standards to ensure proper identification, handling, and traceability throughout the supply chain. The procurement is listed under NAICS code 332313, indicating it relates to forged steel and nonferrous screw machine products, and is classified as a subcontract within the Department of Defense’s Nuclear Reactor Program. Performance is specified to occur in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 30, 2026, and responses are due by August 10, 2026, providing vendors with a twelve-day window to submit offers. The contract is accessible via a public DIBBS link, though no point of contact or set-aside details are provided.

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Hex Cap Screw SupplyThe contract requires the supply of 25 units of Hexagon Head Cap Screws identified by NSN 5305015016071, fully compliant with all applicable military specifications, packaging requirements, and marking standards. The items must be delivered to the designated place of performance in New Cumberland, Pennsylvania, with zip code 17070-5002, ensuring adherence to defense logistics and quality control protocols. This is a subcontract under the Department of Defense, managed by the ASC Commodities Division, and falls under NAICS code 332313 for forged steel product manufacturing. The solicitation was posted on July 30, 2026, with a firm response deadline of August 7, 2026. Interested parties must submit proposals through the DIBBS system via the provided link before the deadline. There is no set aside designation specified, and no point of contact details are listed, implying that all inquiries must be directed through the official procurement portal. Compliance with military-grade standards is mandatory, and failure to meet packaging, marking, or specification requirements will result in disqualification.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Fastener Manufacturing – Machine ScrewsThe contract seeks the manufacture and supply of 28 units of machine screws adhering strictly to military specifications, ensuring full compliance with established material composition, dimensional tolerances, and performance criteria. These fasteners are required to meet rigorous defense industry standards, guaranteeing reliability and interoperability in critical applications. The solicitation is issued under the NAICS code 332313, classifying it as a precision fastener manufacturing subcontract, and is managed by the ASC Commodities Division within the Department of Defense. The deadline for responses is August 7, 2026, with the contract expected to be performed in New Cumberland, Pennsylvania, at the ZIP code 17070-5002. Although no set-aside provisions are specified, the procurement is open to qualified subcontractors capable of delivering compliant hardware within the defined parameters. All submissions must align with the technical and logistical requirements outlined by the DLA, with the official solicitation accessible via the DIBBS platform.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Self-Locking Hexagonal Nuts (Locknuts for Output Shaft)The contract entails the supply and delivery of 137 self-locking hexagonal nuts identified by NSN 5310011551892, designed to meet strict military specifications for form, fit, and function, ensuring compatibility and reliability in critical applications such as output shaft assemblies. All items must be packaged and marked in full compliance with MIL-STD-129 standards to ensure proper identification, handling, and logistics support throughout the defense supply chain. The requirement is classified as a subcontract under NAICS code 332313, with the Department of Defense’s ASC Commodities Division as the contracting agency. Performance is designated for Tracy, California, with a zip code of 95304-5000, indicating the location where delivery and acceptance will occur. The solicitation was posted on July 30, 2026, and responses are due by August 7, 2026, with all proposals required to be submitted through the DIBBS platform at the provided link.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

TRANSMITTER, PRESSURE

Solicitation # SPE4A5-26-Q-0661

The contract pertains to the procurement of 75 pressure transmitters, identified by NSN 6685-21-912-0457 and part number 622712-2-1 from Honeywell Limited, classified as a commercial item and designated as a critical application item. The requirement is firm fixed price with no variance allowed in quantity, and delivery is mandated 477 days after award date. Inspection and acceptance occur at origin, and the item is to be shipped FOB origin. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements referenced with R-numbers including RC001, RP001, RQ011, and RT001, which take precedence over any other standards. Packaging must conform to MIL-STD-129 and RP001, with hazardous materials adhering to FED-STD-313 and IP025, while non-hazardous items follow ASTM D3951 unless superseded by DLA requirements. Unit of issue is each, and palletization must meet DLA packaging standards. Item Unique Identification is not required per customer request, and DFARS 252.211-7003(c)(1)(i) applies. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The delivery destination is Warner Robbins Air Force Base with specific parcel post and freight shipping addresses provided, and the material need date is June 7, 2028.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 24 hours ago

DEADLINE

TRANSMITTER, PRESSUR

Solicitation # SPE4A5-25-T-785M

The contract involves the procurement of five units of the NSN 6685013158618 Transmitter, Pressure, which is designated for delivery to the DLA Distribution at W1A8 within 171 days after award. The procurement is set aside exclusively for Women-Owned Small Businesses (WOSB) under NAICS code 334512, emphasizing opportunities for eligible small business vendors. The solicitation is issued as a Request for Quotation (RFQ), accessible electronically through the provided link, with no hard copies or detailed specifications, plans, or drawings available. All responsible sources are encouraged to submit quotes by the deadline of October 1, 2025, and submissions must be made electronically. The contracting agency is DLA Aviation, part of the Department of Defense, based in Richmond, Virginia. Questions regarding the solicitation should be directed via email to the designated point of contact, with further details available through the official DIBBS website. The contract emphasizes timely response and compliance with the set-aside criteria, ensuring that qualified small businesses, particularly women-owned, have the opportunity to participate in fulfilling this procurement requirement.

Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

about 24 hours ago

DEADLINE

Solicitation # SPE4A5-26-Q-0618

The contract pertains to the procurement of three non-magnetic shackles identified by NSN 4030-01-481-9608 under solicitation SPE4A5-26-Q-0618, with a firm fixed price and zero variance in quantity. Delivery is required within 76 days after order date, with inspection and acceptance occurring at origin, and delivery terms set to FOB destination. Packaging must strictly comply with MIL-STD-2073-1E and DLA's RP001 packaging requirements, including preservation methods, material specifications, and MIL-STD-129 marking without special markings. Mercury and mercury-containing compounds are prohibited in all aspects of the supply chain including preservation, packaging, and direct contact with hardware, except for specific permitted applications such as batteries, fluorescent lamps, sensors, or weapon systems as outlined by NAVSEA, which must include secondary containment. Ozone-depleting substances are entirely banned, regardless of any conflicting specification language, and all substitutions require prior approval. Technical data is proprietary or insufficient, precluding competitive sourcing, and casting or forging may be necessary for manufacturing, requiring suppliers to request tooling and material assistance through DLA’s designated channels. The item is subject to zero-based sampling per MIL-STD-1916 or ASQ H1331, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Item unique identification is not required per customer request, but compliance with the DLA Master List of Technical and Quality Requirements is mandatory, with the applicable revision determined by the solicitation or award date based on acquisition type. The contract is a total small business set-aside, and all deliveries must be addressed to DLA Distribution in San Diego, California.

POSTED

about 24 hours ago

DEADLINE

LIGHT, NAVIGATIONAL, AIR

Solicitation # SPE4A5-26-Q-0660

This contract is for the procurement of two units of a light, navigational aircraft component identified by NSN 6220-01-454-3041 and part number 30-2443-2 from Grimes Aerospace Company. The item is classified as a critical safety item and a commercial product of a type, subject to stringent quality oversight including SAE AS9100 requirements for manufacturers and non-manufacturers. All supplies must comply with MIL-STD-129 marking standards, including lot and serial numbers, contractor and manufacturer CAGE codes, and part numbers, with special fragile labeling. Unit packaging and palletization must adhere to MIL-STD-2073-1E and DLA packaging requirements, with no government identification removed from non-accepted items. Inspection and acceptance occur at origin, with firm fixed pricing and zero variance allowed in quantity. Delivery is due 333 days after order date, with FOB origin terms, and freight is directed to the DLA Distribution facility in New Cumberland, Pennsylvania. Cybersecurity requirements include CMMC Level 2 self-assessment, and all deviations or waivers require formal approval from the DSC Contracting Officer. Technical and quality requirements are drawn from the DLA Master List, with documentation tied to QAP-106 Revision B dated July 9, 2012, and the item is not subject to Item Unique Identification per Service customer request.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 24 hours ago

DEADLINE

TRANSFORMER, POWER

Solicitation # SPE4A5-26-T-308A

The contract specifies the procurement of a critical application power transformer, part number 397849-07403, with NSN 5950009576725, requiring delivery of one unit under CLIN 0001 and an identical unit under CLIN 0002, both with a five-day delivery window after award and a required delivery date of July 23, 2026. Delivery is FOB origin, with inspection and acceptance occurring at the destination, specifically at Marine Aviation Logistics Squadron 16, Building 7209, MCAS Miramar, San Diego, CA. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, prioritizing RP001 for palletization and MIL-STD-129 for marking and labeling; non-hazardous items must be commercially packaged per ASTM D3951 unless superseded, while hazardous items require compliance with TQ requirement IP025 per FED-STD-313. Physical identification of the item must adhere to RQ017, and any government markings on rejected supplies must be removed per RQ011. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances mandated unless otherwise specified, and unspecified attributes are treated as major with an AQL of 1.0. Cybersecurity compliance is mandatory at CMMC Level 2 via self-assessment, supported by the application of FAR clauses 52.240-93 and deviation 2026-00038, which also extend to changes, subcontracting, and contractor information system safeguarding. The contractor must hold a valid UEI and CAGE code, and represent size status and socioeconomic classifications as applicable. Invoicing must be conducted electronically through WAWF, with payment administered via the DoDAAC system. The item is classified as a covered defense item, requiring adherence to all applicable cybersecurity, packaging, handling, and reporting standards. All documentation, including delivery, marking, and compliance reporting, must align with DLA and DoD directives, with no price information provided in the contract lines despite confirmed quantities.

Welding and Soldering Equipment Manufacturing

POSTED

about 24 hours ago

DEADLINE

HOUSING, AIR OUTLET,

Solicitation # SPE4A5-26-T-306Q

The contract pertains to the procurement of one unit of a housing, air outlet, identified by NSN 1660016656502 and part number 189386-2, under solicitation SPE4A5-26-T-306Q, issued by the Department of Defense’s ASC Supplier Oper OEM Division. Delivery is required 169 days after award, with a need ship date of January 17, 2027, and an original delivery target of February 13, 2028, to Tinker Air Force Base, Oklahoma, under FOB Destination terms. The item is exempt from Item Unique Identification per DFARS 252.211-7003(c)(1)(i), but must be physically marked per RQ017 and packaged in compliance with ASTM D3951, with all packaging and labeling requirements superseded by the DLA Master List of Technical and Quality Requirements and governed by MIL-STD-129, including precise palletization under RP001. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, with unspecified attributes treated as major and acceptance criteria demanding zero non-conformances unless stated otherwise; accelerated life testing at 105% of rated voltage is an approved alternative to standard testing. The contractor must comply with CMMC Level 2 self-assessment requirements and adhere to NIST SP 800-171 DOD assessment mandates, with hazardous materials properly labeled per 29 CFR 1910.1200 and reported prior to award. Inspection and acceptance occur at the destination, performed by government personnel, with contract performance governed by FAR and DFARS clauses covering equal opportunity, trafficking in persons, employment eligibility, sustainable products, cybersecurity, subcontracting, safety notifications, and transportation. Payment processing is required via WAWF, with no unit price or total value disclosed in the solicitation. The contract includes mandatory representations regarding small business status, unique entity identifier, and covered defense telecommunications equipment, all to be certified by the offeror. All technical and quality specifications referenced in the DLA Master List override industry standards, and the supply must conform to all applicable packaging, marking, environmental, and cybersecurity obligations outlined in the solicitation.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 24 hours ago

DEADLINE

ADAPTER, STRAIGHT, FL

Solicitation # SPE4A5-26-T-299Z

The contract is for the procurement of two straight flange-to-tube adapters with NSN 4730-01-196-6006 and part number 9969M50P02 from General Electric Company, issued under solicitation SPE4A5-26-T-299Z by the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION. Delivery is required within 171 days after order placement, with an original delivery deadline of November 27, 2027, and a need ship date of January 17, 2027. The item must be manufactured and delivered FOB destination to the DLA Distribution facility in New Cumberland, Pennsylvania, with no tolerance for quantity variance. Packaging must comply with ASTM D3951, but all requirements from the DLA Master List of Technical and Quality Requirements take precedence, including RP001 for palletization and RQ017 for physical identification and bare item marking. All packaging and labeling must adhere to MIL-STD-129, including barcoding per DoD logistics standards, with the unit of issue as each and quantity per unit pack as specified. Sampling for inspection follows MIL-STD-1916 or ASQ H1331 Table 1, requiring zero non-conformances for acceptance unless otherwise stipulated, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0, respectively. Inspection and acceptance are conducted at the origin. The adapter is designated as a critical application item with no shelf life requirement, and item unique identification is not required per DFARS 252.211-7003(c)(1)(i). The contract enforces compliance with hazardous material identification via FAR 52.223-3, cybersecurity protections under 252.204-7012, prohibition of hexavalent chromium, and restrictions on the use of foreign-flag vessels for shipping, which require prior approval and certification. The contractor must flow down applicable clauses to subcontractors and comply with labor laws, including combating trafficking in persons, employment eligibility verification, and whistleblower protections. Invoicing must be submitted electronically via Wide Area WorkFlow, and no pricing information is provided in the contract, as unit and total prices remain blank. The solicitation required electronic submission through

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 24 hours ago

DEADLINE

MOTOR-TACHOMETER GE

Solicitation # SPE4A5-26-T-307W

The contract seeks the delivery of one MOTOR-TACHOMETER GENERATOR with NSN 6105-00-068-7214 under solicitation SPE4A5-26-T-307W, with a required delivery within five days after order placement to San Diego, California. The item must conform to stringent military standards for packaging and marking, including MIL-STD-2073-1E for preservation and packaging, and MIL-STD-129 for labeling with mandatory linear and 2D Data Matrix barcodes. Physical identification of the bare item is required, and all packaging must adhere to DLA’s RP001 requirements, prohibiting parcel post in favor of traceable transportation methods. Sampling for acceptance follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required for acceptance, unless otherwise specified, and attributes are assigned AQLs of 0.1 for critical, 1.0 for major, and 4.0 for minor characteristics. The contractor must comply with DLA’s Technical and Quality Requirements referenced through R and I numbers in the DLA Master List, with the applicable revision controlled by the solicitation issue or award date. The contract imposes robust cybersecurity and compliance obligations under CMMC Level 2 self-assessment and NIST SP 800-171 requirements, mandating safeguarding of covered defense information and reporting of cyber incidents per DFARS 252.204-7012. Hazardous materials must be labeled and documented with Safety Data Sheets compliant with 29 CFR 1910.1200 and submitted prior to award, and any ocean transport must use U.S.-flag vessels unless a prior waiver is granted with detailed documentation and bill of lading submission. The contractor is subject to payment levies for outstanding government debts and must immediately report any potential safety issues with the item. Invoicing must be conducted via WAWF, and compliance with FAR and DFARS clauses covering employment eligibility, trafficking in persons, sustainable products, subcontracting, inspection at destination, and prohibitions on procurement from communist Chinese military companies is required. Offerors must provide UEI and CAGE codes, represent their small business status, and disclose joint venture partners if applicable, with deviations applying to multiple clauses under Deviation 2026-00038. All proposals must be submitted electronically via DIBBS by the

Motor and Generator Manufacturing

POSTED

about 24 hours ago

DEADLINE

PANEL, STRUCTURAL, AI

Solicitation # SPE4A5-26-T-308G

The contract covers the procurement of a single structural panel, identified by NSN 1560016882236 and part number 113T1617Y103, for use in critical aerospace applications under The Boeing Company. The item is subject to stringent technical, quality, and regulatory requirements, including compliance with the DLA Master List of Technical and Quality Requirements, FAA airworthiness standards for certified parts, and configuration change management protocols. Packaging and preservation must adhere strictly to MIL-STD-2073-1E with preservation method 10, no preservation material, and packaging code U, while marking must conform to MIL-STD-129 without special markings. Palletization follows DLA Packaging Requirements for Procurement, and shipment must utilize traceable freight methods—parcel post is prohibited. Inspection and acceptance occur at the destination, with sampling governed by MIL-STD-1916 or a comparable zero-based plan, requiring zero non-conformances unless otherwise specified. Item Unique Identification is not required per the service customer’s request. Delivery is due within five days of order, FOB origin, to McConnell AFB, KS, with required dates of July 15 and July 21, 2026, depending on the line item. The contract includes multiple clauses under FAR and DFARS addressing cybersecurity, hazardous materials, export controls, trafficking in persons, employment eligibility, and supplier diversity, with numerous deviations authorized through formal deviation numbers. All pricing information is omitted, and no total contract value is provided, though three separate CLINs each specify one unit to be delivered. Invoicing must be processed via Wide Area WorkFlow, and contractors must comply with NIST SP 800-171 for safeguarding covered defense information, with cyber incidents requiring reporting within 72 hours. Prohibitions on hexavalent chromium, covered defense telecommunications equipment, and Communist Chinese Military Companies apply, and the contractor must ensure compliance with all applicable hazardous materials reporting and handling standards. Supply chain traceability documentation must be retained per DLA Procurement Note C03, and the contractor is responsible for full compliance with FAA airworthiness approval requirements, including the submission of a Certificate of Airworthiness and Conformance.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 24 hours ago

DEADLINE

SHAFT ASSEMBLY, ACTU

Solicitation # SPE4A5-26-T-307M

The contract solicitation SPE4A5-26-T-307M is for the procurement of one unit of a shaft assembly, actuator, identified by NSN 1680010118060 and part number AA8586 from Simmonds Precision Products Inc. The item is classified as a critical application item and must be delivered 172 days after receipt of order, with an original required delivery date of February 1, 2027, and a need ship date of February 1, 2026. Delivery is FOB origin and acceptance occurs at the destination facility, specifically the DDSP New Cumberland Facility in New Cumberland, Pennsylvania. The contractor must comply with stringent packaging and marking requirements per ASTM D3951 and MIL-STD-129, including barcoding with Data Matrix and UCC-128 labels, and palletization in accordance with DLA Packaging Requirements RP001. All packaging and labeling must adhere to the DLA Master List of Technical and Quality Requirements, which supersedes ASTM D3951 where applicable. Inspection and acceptance criteria mandate zero nonconformances in sampling, using MIL-STD-1916 or ASQ H1331 Table 1 with specified verification levels and AQLs for critical, major, and minor attributes; unspecified attributes default to major level. The item must be physically marked per RQ017, and government identification must be removed from non-accepted supplies per RQ011. Invoicing must be conducted electronically via Wide Area WorkFlow. The contract includes numerous Federal Acquisition Regulation clauses addressing cybersecurity, trafficking in persons, employment eligibility, sustainable products, hazardous material handling, safeguarding of covered defense information, changes, and subcontracting, all applied under Deviation 2026-00038 or 2026-O0025 as appropriate. Compliance with prohibitions on covered defense telecommunications equipment and hexavalent chromium is mandatory, and the contractor must affirm its small business status, UEI, and CAGE code, with additional reporting triggered if covered equipment is provided. The contracting officer has not specified the contract type, pricing, or evaluation factors, leaving offerors to submit competitive proposals under an undefined acquisition strategy. All submissions must be made through the DLA Internet Bid Board System by the response deadline of August 5, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 24 hours ago

DEADLINE

SENSOR ASSY, SKIN TE

Solicitation # SPE4A5-26-T-307L

The contract pertains to the procurement of a SENSOR ASSY, SKIN TEMPERATURE, identified by NSN 1680007929233 and part number 969-0032-001, with a total quantity of 67 units to be delivered FOB origin to Tinker Air Force Base, Oklahoma, within 133 days of the award, with inspection and acceptance occurring at the destination. The item is classified as a commercial item, and the procurement is structured as a total small business set-aside under NAICS code 336413. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which take precedence over all other standards including ASTM D3951, and contractors must comply with specific requirements such as RQ017 for bare item marking, RQ011 for removal of government identification from non-accepted items, and RT001 for measuring and test equipment. Sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required for acceptance unless otherwise specified; attributes are classified with verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must meet DLA Packaging Requirements for Procurement, with all UoI and QUP as contractually defined. Cybersecurity compliance requires a CMMC Level 2 self-assessment and adherence to NIST SP 800-171 DOD assessment requirements, while safeguarding of covered contractor information systems is mandatory under applicable clauses. Item Unique Identification is not required per DFARS 252.211-7003(c)(1)(i). The contract includes clauses on equal opportunity, combating human trafficking, employment eligibility verification, sustainable products, hazardous material identification, and accelerated payments to small business subcontractors, with multiple deviations applied. Invoicing must be processed electronically through Wide Area WorkFlow, and delivery must be to the designated DLA Distribution Depot Oklahoma address. The contract does not specify option quantities or a formal contract type, and pricing information for the identified line item is listed at $67.00 per unit, though additional PRLIs with higher unit costs appear in partial data without full context.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 24 hours ago

DEADLINE

SHAFT ASSEMBLY, ACTU

Solicitation # SPE4A5-26-T-9432

The contract specifies the procurement of a Shaft Assembly, Actuator with NSN 1680010118060 and part number AA8586, manufactured by Simmonds Precision Products Inc, under solicitation SPE4A5-26-T-9432. Four units are required at a fixed quantity with zero variance, to be delivered FOB origin within 27 days of contract award, with delivery scheduled for April 13, 2027. Inspection and acceptance occur at the destination, and all items must comply with the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging must conform to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization and labeling strictly following government specifications. Sampling and inspection must adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical attributes are subject to the most stringent verification levels. The supplier must manage configuration changes through formal Engineering Change Proposals and ensure all non-accepted supplies are properly de-identified per RQ011. All technical, quality, and packaging directives, including those identified by R or I numbers, are binding and must be referenced from the official DLA eProcurement portal. The item is classified as a Critical Application Item, and delivery must be sent to the designated DLA distribution facility in New Cumberland, Pennsylvania, with transportation details governed by DLAD Proc Notes C19 and C20.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 24 hours ago

DEADLINE