Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Reconditioning and Rebuild of Orifice Tip Fittings

Active

Federal

Response Deadline08/04/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks a subcontractor to perform the complete reconditioning and rebuilding of orifice tip fittings to stringent military and industrial specifications. This includes disassembling the fittings, inspecting all components for wear or damage, cleaning thoroughly, repairing or replacing defective parts as necessary, and reassembling the units to restore full operational capability. Each reconditioned fitting must undergo rigorous performance testing to ensure compliance with required standards, and all work must be documented to demonstrate adherence to technical and quality control protocols. The scope is focused on restoring functionality and reliability, with no new manufacturing involved. The contract is identified under NAICS code 332998 for Other Fabricated Metal Product Manufacturing and is issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. It is classified as a subcontract with no set-aside designation and has a response deadline of August 4, 2026. The work is not tied to a specific geographic location, and all deliverables must meet exacting defense standards without deviation. Interested parties must respond through the DIBBS system using the provided solicitation link before the deadline to be considered.

General Info

Recondition orifice tip fittings to military specs, no new manufacturing, testing and documentation required, deadline August 4, 2026.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

332998 - Enameled Iron and Metal Sanitary Ware ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 28

subcontract

Response DeadlineAug 4

Submission deadline

Response Deadline

08/04/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Disassemble, inspect, clean, repair, and reassemble orifice tip fittings to meet military or industrial specifications, including component replacement and performance testing.

Similar Contracts

Same NAICS industry code

Manufacture of Plain Seals (NSN 5330-99-852-6523)The contract requires the manufacture and delivery of exactly 111 units of a plain seal identified by NSN 5330-99-852-6523, adhering strictly to military specifications for form, fit, and function with zero tolerance for any deviation in quantity. All units must meet exacting standards to ensure compatibility and reliability in defense applications, and the supplier must guarantee that no more or fewer than the specified number of seals are delivered. The solicitation is designated as a Total Small Business Set-Aside under FAR 19.5, meaning only small businesses are eligible to compete, and it is classified under NAICS code 332998 for other fabricated metal product manufacturing. The performance location is specified as New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the award will be managed by the ASC Supplier Operations OEM Division under the Department of Defense. The request for quotation was posted on July 28, 2026, and responses are due by August 5, 2026, with the procurement process conducted as a subcontract under the DLA Dibbs system.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Precision Mechanical Components SupplyThe contract solicits the supply of high-specification mechanical components including bearings and couplings identified by NSN 3895-01-226-6156, requiring strict adherence to military specifications and full material traceability to ensure operational reliability and quality assurance. These parts are critical for defense equipment systems and must meet rigorous engineering and documentation standards to support long-term maintenance and readiness. The opportunity is structured as a subcontract under NAICS code 332998, with a response deadline of August 4, 2026, and was posted on July 28, 2026, by the Department of Defense through its Construction & Equipment Manufacture & Con organization. Performance is expected to align with federal supply chain requirements, though specific delivery locations and point of contact details are not provided in the available data.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Precision Diaphragm ManufacturingThe contract involves the precision manufacture of a specialized pump diaphragm in strict accordance with military technical specifications, demanding exacting fabrication standards and adherence to rigorous material and performance requirements. This subcontract is part of a broader defense supply initiative, with all work required to be performed at Fort Irwin, California, 92310-9986, and must meet the quality and reliability benchmarks essential for military operational use. The NAICS code 332998 indicates classification under Other Miscellaneous Manufacturing, underscoring the specialized, non-standard nature of the component being produced. Bidders must submit responses by August 10, 2026, following the solicitation issued on July 28, 2026, through the DIBBS platform under reference SPE7M126T235M. While no set-aside designation or specific organization type is defined, the contract is explicitly structured as a subcontract within the Department of Defense’s Maritime Supply Chain framework, implying the end product will support naval or maritime defense systems. Compliance with all technical, material, and delivery requirements is mandatory, with failure to meet specifications potentially resulting in rejection or contract termination.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Loop Clamp Manufacturing and SupplyThe contract requires the manufacture and delivery of 10,206 precision loop clamps that must fully comply with military specifications for materials, dimensional tolerances, and packaging standards. These components are intended for use in critical defense logistics and equipment systems, ensuring operational reliability under demanding conditions. The work must be performed under a total small business set-aside classification, reserved exclusively for small businesses as defined by the SBA, with the NAICS code 332998 applying to other fabricated metal product manufacturing. The place of performance is designated as Tinker AFB with a ZIP code of 73145-8000, indicating the primary operational location for delivery and integration. The solicitation was posted on July 28, 2026, with responses due by August 10, 2026, and is structured as a subcontract under the Department of Defense's Land Supply Chain organization.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Poppet Override Component (NSN 4820014840122)The contract requires the manufacture and delivery of one military-specification POPPET OVERRIDE component identified by NSN 4820014840122, adhering strictly to defense standards for design, materials, and performance. The supplier must provide full compliance with packaging, labeling, and hazardous materials documentation protocols to ensure safe handling, transportation, and storage in accordance with military regulations. The component is to be delivered to a specified performance location in Groton, Connecticut, with all associated logistical and regulatory requirements fully met prior to acceptance. The solicitation, issued under the Defense Logistics Agency on behalf of the Department of Defense, is a subcontract opportunity with a posting date of July 28, 2026, and a firm response deadline of August 10, 2026. The NAICS code 332998 indicates the work falls under other miscellaneous fabricated metal product manufacturing, suggesting specialized machining or fabrication capabilities are required. No set-aside preferences are specified, and all qualifying vendors may respond, with submissions managed through the DIBBS platform. Full adherence to technical, compliance, and delivery timelines is critical to meet operational readiness needs.

Defense Logistics Agency

POSTED

DEADLINE

O-Ring Manufacturing and SupplyThe contract calls for the manufacture and supply of three military-specification O-rings identified by NSN 5331016140064, with strict adherence to defense standards and hazardous material regulations to ensure operational safety and compliance in critical defense applications. The work is to be performed under a subcontract arrangement through the Department of Defense’s Land Supply Chain, with performance specifically required at Fort Sill, Oklahoma, zip code 73503-0000, and must meet all technical and quality requirements defined for military-grade sealing components. The solicitation was posted on July 28, 2026, and responses are due by August 10, 2026, leaving a narrow window for qualified suppliers to submit proposals. The NAICS code 332998 indicates the industry classification for other fabricated metal product manufacturing, underscoring the specialized nature of the production process. The contract is not subject to any specific set-aside categorization, meaning all eligible subcontractors may compete. The official solicitation details are accessible through the DIBBS platform, and all deliverables must align fully with DoD specifications to ensure integration into existing military systems.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Precision Manufacturing of Critical Application Clutch DiskThe contract pertains to the precision manufacture of a non-vehicular clutch disk with part number 367237 and NSN 3010008128162, designated as a Critical Application Item for use by the Department of Defense. The component must comply with stringent military-grade material and performance specifications, ensuring reliability and durability under demanding operational conditions. This subcontract is part of the Strategic Acquisition Program Directorate’s efforts to secure specialized components critical to defense systems, with all manufacturing requirements aligned to uphold the highest standards of quality and traceability mandated for DoD applications. The solicitation was posted on July 28, 2026, with a firm response deadline of August 12, 2026, giving potential suppliers approximately two weeks to submit proposals. The North American Industry Classification System code 332998 indicates the work falls under other fabricated metal product manufacturing, emphasizing the specialized nature of the machining and assembly processes involved. The place of performance and point of contact details are unspecified, but the work is expected to be completed in accordance with federal defense contracting protocols. The contract opportunity is accessible via the DIBBS portal, and bidders must be prepared to meet all defense industrial base compliance requirements, including security, reporting, and supply chain integrity standards.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Precision O-Ring Manufacturing for Defense ApplicationsThe contract calls for the manufacture of 750 high-specification O-rings intended for use in Mark 46 and Mark 48 torpedo systems, with stringent requirements for material traceability and compliance with military preservation standards. Each O-ring must be produced using materials that ensure a fixed shelf life of 180 months, with no possibility of extension, and must undergo cleaning and drying as the sole preservation method to meet defense-grade specifications. The production must maintain full documentation from raw material sourcing through final inspection to guarantee authenticity and integrity throughout the component’s lifecycle. The contract is issued under the NAICS code 332998 and is categorized as a subcontract tied to the Department of Defense’s Land Supply Chain organization. Performance is required at a facility in Tracy, California, with the ZIP code 95304-5000. All bids must be submitted by August 10, 2026, following a posting date of July 28, 2026. This procurement is part of a broader effort to sustain critical underwater warfare systems, underscoring the necessity for precision manufacturing, regulatory adherence, and secure supply chain practices without reliance on additives, coatings, or alternative preservation techniques.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Precision Bearing Component Manufacturing

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Actuating Cylinder Assembly ManufacturingThe contract requires the manufacture of 44 actuating cylinder assemblies designated by NSN 3040014350999, encompassing full lifecycle production from design compliance and material sourcing through fabrication, assembly, and rigorous quality assurance processes adherence to military standards. All work must meet exacting technical specifications to ensure operational reliability and durability under demanding conditions, with compliance verified throughout each phase of production. The solicitation is a subcontract under the Department of Defense, managed by the LAND SUPPLY CHAIN organization, with performance required at Robins Air Force Base, Georgia, zip code 31098-1887. The contract falls under NAICS code 332998 for other fabricated metal product manufacturing and was posted on July 26, 2026, with responses due by August 6, 2026. Interested parties must submit proposals through the DIBBS portal using the provided RFQ link to be considered for award.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Precision Shaft ManufacturingA single precision shouldered shaft is to be manufactured and delivered in strict compliance with military or federal specifications, guided by detailed technical drawings and defense-related standards to ensure dimensional accuracy, material integrity, and performance under stringent operational conditions. The subcontract requires full adherence to quality control protocols inherent in defense supply chains, with production and inspection processes aligned to maintain traceability and certification for government use. The solicitation, posted on July 26, 2026, with a response deadline of August 6, 2026, is issued under the NAICS code 332998 for other fabricated metal product manufacturing and falls under the Department of Defense's LAND SUPPLIER OPNS VEHICLE SPT organization. Delivery must be made to the designated place of performance in FPO with postal code 34091, and all work must satisfy the technical and regulatory requirements mandated by the defense infrastructure, though no specific set-aside provisions are indicated. The contract opportunity is accessible through the DIBBS system for qualified subcontractors seeking to support defense vehicle support operations.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Mechanical Seal Parts Kit SupplyThe contract requires the manufacture and supply of 66 units of a mechanical seal replacement parts kit identified by NSN 5330-01-588-2609, all of which must fully comply with military specifications for packaging, labeling, and handling of hazardous materials. The work is for a subcontract under the Department of Defense, managed by LAND SUPPLIER OPNS VEHICLE SPT, with performance location specified as Tracy, California, zip code 95304-5000. The solicitation was posted on July 23, 2026, and responses must be submitted by August 3, 2026. The NAICS code 332998 indicates the work falls under other fabricated metal product manufacturing, emphasizing the precision and compliance requirements inherent to defense-related components. All deliverables must meet strict regulatory standards to ensure operational readiness and safe logistical handling throughout the defense supply chain.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

PANEL, STRUCTURAL, AI

Solicitation # SPE4A7-26-Q-0920

The contract is for one structural panel, item number 1560-01-196-4405, under solicitation SPE4A7-26-Q-0920, with a delivery deadline of 440 days after order. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions applicable based on the acquisition type and timeline—simplified acquisitions follow the revision in effect on the solicitation issue or award date, while large acquisitions use the revision active on the RFP issue date unless a later amendment supersedes it. The item is subject to multiple DLA-specific requirements including packaging, inspection and acceptance at origin, physical identification and marking of the bare item, measurement and test equipment standards, and configuration change management through engineering change proposals. Importantly, the item is exempt from item unique identification per service customer request, and government identification must be removed from non-accepted supplies. The technical data associated with this item is subject to export controls under ITAR or EAR, requiring explicit authorization for any disclosure to foreign persons, regardless of location, and only contractors with approved JCP certification, completed training, and DLA clearance may access such data. All applicable DFARS clauses, including those governing export control and contractor responsibilities, are in effect. The solicitation was posted on July 29, 2026, with a response deadline of August 5, 2026, and is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division, with NyA Currie as the primary point of contact.

Fabricated Structural Metal Manufacturing

POSTED

about 11 hours ago

DEADLINE

ARM, ACTUATING VANE

Solicitation # SPE4A7-26-T-599K

The contract pertains to the procurement of 5,059 units of an ARM, ACTUATING VANE with NSN 2840-00-199-5235, issued under solicitation SPE4A7-26-T-599K by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The item is classified as technical data subject to U.S. export control regulations, either ITAR or EAR, meaning any transfer, including electronic disclosure to foreign persons within or outside the United States, requires explicit government authorization. DFARS 252.225-7048 governs the handling of this controlled information, and access is restricted to contractors certified under the U.S./Canada Joint Certification Program who have completed mandatory DLA training and approval processes. Delivery is scheduled 547 days after award, with the place of performance located at Cherry Point, North Carolina, 28533-5040. The solicitation was posted on July 29, 2026, with responses due by August 6, 2026, under a NAICS code 336412 indicating aircraft and missile propulsion systems manufacturing. The primary point of contact for inquiries is Mahlon Marcus, reachable via email and phone. The acquisition is designated as a federal procurement with no set-aside classification. All parties handling the technical data must comply with stringent controls to prevent unauthorized disclosure, extending to U.S. companies and their foreign subsidiaries, and DLA mandates additional verification steps before granting access to the controlled technical information.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 11 hours ago

DEADLINE

DUCT ASSEMBLY, AIR COND

Solicitation # SPE4A7-26-Q-0921

The contract is for the procurement of four duct assemblies for aircraft air conditioning and heating systems, identified by NSN 1660-01-138-4412, with a delivery requirement within 300 days after award. The solicitation number is SPE4A7-26-Q-0921, issued by the Department of Defense through the ASC Supplier Oper AE and AF Division, with a response deadline of August 10, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation or award date depending on the acquisition size. The item is subject to export control under ITAR or EAR, restricting unauthorized disclosure of technical data to foreign persons, including foreign nationals within the U.S., and requires compliance with DFARS 252.225-7048. Access to controlled data is limited to contractors holding valid US/Canada Joint Certification Program certification, who have completed mandatory DOD export control training and been approved by DLA. Packaging, inspection at origin, removal of government identification from non-accepted items, and calibration of test equipment are governed by specific DLA requirements, and all delivered items must adhere to rigorous quality standards applicable to both manufacturers and non-manufacturers.

Sheet Metal Work Manufacturing

POSTED

about 11 hours ago

DEADLINE

LEAD, ELECTRICAL

Solicitation # SPE4A7-26-Q-0922

Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 11 hours ago

DEADLINE

TOW COLLAR, LANDING GEA

Solicitation # SPE4A7-26-T-600P

The contract is for the procurement of two TOW COLLAR, LANDING GEAR units with NSN 1620-01-073-1108 under solicitation SPE4A7-26-T-600P, issued by the Department of Defense through the Defense Logistics Agency. The requirement is designated as a Total Small Business Set-Aside under NAICS code 336413, with responses due by August 6, 2026, and delivery expected within 163 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and must comply with DLA packaging standards, inspection and acceptance at origin, and the removal of government identification from non-accepted supplies. Physical identification and bare item marking are mandatory, and the item is subject to Covered Defense Information requirements. The technical data associated with this part is controlled under ITAR or EAR, prohibiting unauthorized export or disclosure to foreign persons, even within the United States, and only contractors with approved JCP certification, completed DOD export training, and DLA authorization may access the data. Cybersecurity compliance requires CMMC Level 2 certification by a C3PAO, and performance is to occur at Tinker AFB, Oklahoma. Primary point of contact is Mahlon Marcus at DLA.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 11 hours ago

DEADLINE

Solicitation # SPE4A7-26-T-600B

This contract is for the procurement of 1,087 units of a spacer sleeve identified by NSN 5365-01-285-9796 and part number NAS42DD6-48N, classified as a commercial item under the DLA acquisition system. The item must comply with a comprehensive set of technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including specific provisions for inspection at origin, government identification removal, physical marking, and test equipment calibration. Packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization following DLA’s packaging standards, and all labeling must reflect the specified unit of issue and quantity per unit pack. The item is designated as a critical application component and must meet the technical specifications of NAS42 Revision 11 dated 10/31/2012. Delivery is required FOB origin within 86 days, with strict zero tolerance for quantity variance and acceptance also taking place at origin. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and verification levels are assigned based on attribute classification. The contract specifies a unit price and total value but does not include a shelf life requirement. All shipments must be directed to the DLA Distribution Depot at Hill AFB, Utah, with transportation protocols outlined in DLAD Proc Notes C19 and C20. The required delivery date is April 16, 2027, with an initial ship date of November 1, 2026, under solicitation SPE4A7-26-T-600B, issued by the Department of Defense’s ASC Supplier Operations division.

Apparel Accessories and Other Apparel Manufacturing

POSTED

about 11 hours ago

DEADLINE

PLATE, STRUCTURAL, AI

Solicitation # SPE4A7-26-T-600A

The contract is for the procurement of 16 structural plates designated for aircraft use, identified by part number 68A350868-2010 and NSN 1560-01-291-2535. The item is subject to strict export controls under either ITAR or EAR, prohibiting any disclosure or transfer of associated technical data to foreign persons, including foreign nationals within the United States, without prior authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is mandatory, and distribution is restricted to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed required training on handling DOD export-controlled technical data, and have received explicit approval from DLA. Packaging must adhere to DLA procurement standards, and physical identification of the item must follow specified marking requirements. Cybersecurity compliance is enforced through CMMC Level 2 certification for any assessed third-party organizations involved. The solicitation number is SPE4A7-26-T-600A, issued by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of August 6, 2026, and an expected delivery timeline of 166 days after award. Performance will occur at Robins Air Force Base, Georgia, with Mahlon Marcus listed as the primary point of contact. The NAICS code 336413 applies, indicating the item falls under aircraft manufacturing. No set-aside classification is specified, and the contract is open to federal contractors meeting all export, cybersecurity, and packaging requirements. The technical data associated with the item is tightly controlled, and failure to comply with export regulations or handling protocols will result in contract violation.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 11 hours ago

DEADLINE

Solicitation # SPE4A7-26-T-599M

This contract pertains to the procurement of 445 blind rivets identified by NSN 5320-01-192-1492 and part number NAS9308M-4-04, manufactured in accordance with Technical Data Package Revision B General 2, compliant with NAS9308 Revision 5 and reference drawing 13873 011921492-19241. The items must meet all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951, and packaging must comply with MIL-STD-129 and DLA Packaging Requirements. Inspection and acceptance occur at origin, following zero-defect sampling protocols under MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0. All items must be physically marked and labeled as required, with government identification removed from non-accepted supplies. Packaging shall be palletized per RP001, and the unit of issue is each, with no variance permitted in quantity. The delivery schedule requires fulfillment within 84 days of award, with delivery scheduled for October 30, 2026, and an original required delivery date of January 1, 2027. The destination is the DLA Distribution San Joaquin warehouse in Tracy, California, with freight and transportation governed by DLA procedural notes C19 and C20. The contract is issued under solicitation SPE4A7-26-T-599M with a total price of $445.00 per unit for the full quantity, and the point of contact is Brad Ingram of the Department of Defense.

Hardware Manufacturing

POSTED

about 11 hours ago

DEADLINE

SPACER, REACTION, IGNITI

Solicitation # SPE4A7-26-T-600N

The contract pertains to the procurement of four units of SPACER, REACTION, IGNITION with NSN 5365-01-230-3095, under solicitation SPE4A7-26-T-600N, with a response deadline of August 6, 2026, and a required delivery within five days after order placement. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The item is subject to export control under ITAR or EAR, restricting disclosure of associated technical data to foreign persons regardless of location, and mandates compliance with DFARS 252.225-7048. Access to such controlled data is limited to contractors with approved US/Canada Joint Certification Program status, who have completed mandatory DOD export control training and DLA questionnaire, and have received formal authorization from DLA. Packaging must adhere to DLA standards, inspection and acceptance occur at the manufacturer’s origin, and non-accepted items must have government identification removed. Covered defense information applies, and tailored higher-level quality requirements are enforced for both manufacturers and non-manufacturers. The solicitation is issued by the Department of Defense through the ASC Supplier Oper AE and AF Division, with Christian Roberson as the primary point of contact.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 11 hours ago

DEADLINE

DUCT, AIR CONDITIONING

Solicitation # SPE4A7-26-Q-0882

The contract is for the procurement of two duct air conditioning units under NSN 1560-00-878-4950, with a delivery requirement of 282 days after award. It is issued under solicitation SPE4A7-26-Q-0882, with a response deadline of August 10, 2026, and is classified under NAICS code 336413 for aircraft and parts manufacturing. The contract incorporates a comprehensive set of technical and quality requirements referenced from the DLA Master List, including packaging standards, inspection at origin, measurement and test equipment compliance, and configuration change management. Export control is strictly enforced under ITAR or EAR regulations, prohibiting unauthorized disclosure of technical data to foreign persons, including foreign nationals within the U.S., and applies to all contractors and their subsidiaries. Access to this data is restricted to contractors who hold a valid US/Canada Joint Certification Program certification, have completed required DLA training on handling export-controlled technical data, and have received formal approval from the DLA controlling authority. Additionally, government identification must be removed from non-accepted supplies, and all work must comply with tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers. The primary point of contact is April Reed of the Department of Defense’s ASC Supplier Oper AE and AF Division, reachable via email and phone provided in the contract data.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 11 hours ago

DEADLINE

BRUSH SEAL, COVER

Solicitation # SPE4A7-26-Q-0886

The contract specifies the procurement of 45 units of BRUSH SEAL, COVER, with each unit measured as 1PG equaling 2EA, resulting in a total of 90 individual items. The item is identified by NSN/Part Number 1680-01-062-1740 and is tied to Purchase Request 7016849191. Delivery is required within 106 days after delivery order. The solicitation number is SPE4A7-26-Q-0886, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of August 8, 2026, and a posted date of July 29, 2026. Primary point of contact is April Reed, reachable via email and phone provided. This item contains technical data subject to export control under either ITAR or EAR, meaning any disclosure, including to foreign nationals within the United States, requires prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 applies, and only DLA contractors with approved US/Canada Joint Certification Program certification, completion of required DOD export-controlled data training, and approval from the DLA controlling authority are permitted to access this data. Additional requirements include certification as a CMMC Level 2 C3PAO and compliance with physical identification and bare item marking standards. All distribution and handling must strictly conform to DLA’s export control protocols.

POSTED

about 11 hours ago

DEADLINE

FITTING, STRUCTURAL

Solicitation # SPE4A7-26-Q-0928

The contract specifies the procurement of 15 structural fittings with NSN 1560-01-649-2616 under solicitation SPE4A7-26-Q-0928, with a delivery requirement of 250 days after contract award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The supplier must comply with DLA packaging standards, inspection and acceptance at origin, and strict retention of supply chain traceability documentation as defined in DLA Procurement Note C03 from August 2016. Item Unique Identification is not required per the Service customer’s request, and DFARS 252.211-7003(c)(1)(i) applies. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise specified; critical, major, and minor attributes must be verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Export control of technical data is strictly enforced under ITAR or EAR, prohibiting any disclosure to foreign persons without prior authorization, and requires contractors to hold valid US/Canada Joint Certification Program certification, complete mandatory training and DLA questionnaires, and obtain formal approval from DLA to access controlled data. The contract is issued by the Department of Defense through the ASC Supplier Oper AE and AF Division, with point of contact Rekisha Burton, and the solicitation response deadline is August 11, 2026.

Fabricated Structural Metal Manufacturing

POSTED

about 11 hours ago

DEADLINE