This Government Contract opportunity from Connecticut was posted on May 15, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Recreational Trail Feature Design (Benches, Signage, Boardwalks)

Closed

State & Local

Submission Closed06/01/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332323

New

DIBBS

HEATING ELEMENT, ELECTR

Solicitation # SPE8E8-27-T-0350

Solicitation SPE8E8-27-T-0350 is a procurement request by the DLA Distribution San Joaquin for 37 electrical immersion heating elements, identified by NSN 4520-01-530-8693. The contract specifies a delivery timeframe of 167 days after order, with a need ship date of April 26, 2027. Performance is based on FOB Origin terms, while inspection and acceptance will occur at the destination in Tracy, California. The procurement incorporates technical and quality requirements from the DLA Master List, and requires compliance with ASTM D3951 for packaging and MIL-STD-129 for marking and labeling. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and adherence to DFARS regulations regarding the Berry Amendment, Buy American Act, and cybersecurity reporting under DFARS 252.204-7012. Offerors must submit quotes through the DLA Internet Bid Board System and provide necessary small business representations. The contract is managed by Alexis Selby at DLA Troop Support, Construction and Equipment.

POSTED

DEADLINE

HEATING ELEMENT, ELECTR

Solicitation # SPE8E8-27-T-0367

This solicitation, issued by DLA Troop Support Construction and Equipment, is a Request for Quotations for the procurement of 24 electrical immersion-type heating elements, identified by NSN 4520-01-597-3589. The contract is designated as a Service-Disabled Veteran-Owned Small Business Set-Aside under NAICS code 332323. Delivery is required within 167 days after order, with the place of performance and delivery located at DLA Distribution San Diego, California. Inspection and acceptance will occur at the destination. The contractor must adhere to strict packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129, and comply with DLA packaging requirements under RP001. Technical and quality requirements are governed by the DLA Master List (RA001), and the contract prohibits the intentional addition of mercury or mercury-containing compounds, except where functionally required. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system. Key regulatory requirements include compliance with the Buy American Act, the Berry Amendment, and various DFARS clauses regarding the safeguarding of covered defense information and the prohibition of certain telecommunications equipment. Quotations must be submitted via the DLA Internet Bid Board System (DIBBS) by November 9, 2026.

POSTED

DEADLINE

HEATING ELEMENT, ELECTR

Solicitation # SPE8E8-27-T-0352

This fixed-price solicitation, issued by DLA Troop Support Construction and Equipment, is for the procurement of three non-immersion electrical heating elements identified by NSN 4520-01-530-8694. The contract is designated as a HUBZone set-aside under NAICS code 332323. Delivery is required within 167 days after receipt of order, with a specified need ship date of April 26, 2027, and a final required delivery date of May 26, 2027. The items are to be delivered FOB Origin to the DDSP New Cumberland Facility in Pennsylvania, where both inspection and acceptance will occur at the destination. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, with DLA packaging requirements RP001 and the DLA Master List of Technical and Quality Requirements taking precedence. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. The contract incorporates various federal and defense regulations, including the Buy American Act, the Berry Amendment, and stringent cybersecurity requirements such as DFARS 252.204-7012 for safeguarding covered defense information. Offerors are encouraged to submit quantity ranges via DIBBS and must provide full data packages if proposing alternate parts.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Tapered Aluminum Street Light Pole Supplier

Planning and Public Works

POSTED

DEADLINE

GDOT-Certified Guardrail Material SupplyThis subcontract opportunity with the City of Fairburn requires a GDOT certified supplier to provide new and unused guardrail and anchorage materials for prime contractors. The scope of work includes the sourcing and delivery of Type T and Type W guardrail components, as well as TP T1 and TP T2A anchorage, to designated project sites or storage yards. All provided materials must be certified and strictly adhere to GDOT Standard Specifications. The solicitation was posted on October 28, 2026, with a response deadline of December 7, 2026. This procurement falls under NAICS code 332323 and is specifically intended for the supply of critical infrastructure materials to support municipal projects within the state of Georgia.

POSTED

DEADLINE

CMP Pipe SupplyThis subcontract agreement involves the supply of Corrugated Metal Pipe for prime contractors working on projects managed by the Henry County Board of Commissioners in Georgia. The scope of work requires the furnishing and delivery of 208 total linear feet of 36-inch and 42-inch pipe to various project sites within Henry County, ensuring all materials meet GDOT specifications. The opportunity was posted on October 28, 2026, with a response deadline set for November 25, 2026. Classified under NAICS code 332323, this contract focuses specifically on the procurement and logistical delivery of specified piping materials to support local infrastructure development.

Henry County Board of Commissioners

POSTED

DEADLINE

Custom Steel Security Gate FabricationThis subcontract for Custom Steel Security Gate Fabrication involves the production and delivery of two powder-coated steel double swing gates for Valley Center Pauma USD facility projects. Each gate must measure approximately 18 feet wide by 5 feet tall. The project strictly prohibits the use of chain link materials and requires full compliance with California Air Resources Board standards. The selected subcontractor is responsible for the complete fabrication and delivery of the finished gates to the project site in Valley Center, California. This opportunity is categorized under NAICS code 332323 and is intended for prime contractors managing the district's facility improvements.

Valley Center Pauma USD

POSTED

DEADLINE

Supply of Ameristar Impasse Trident (or Equal) Fencing ComponentsThis subcontract, issued by the Department of Veterans Affairs Network Contract Office 01, requires the supply of high-security fencing materials for projects at the VA Boston Healthcare System. The scope of work involves providing Ameristar Impasse Trident components or approved equivalents, specifically including fence panels, posts, brackets, rails, and fasteners. All materials must feature corrosion-resistant and tamper-resistant hardware, and outdoor steel components must have protective coatings that match existing finishes. The selected provider is responsible for delivering these materials to the Brockton VA Campus and providing all necessary manufacturer product documentation and warranties. This opportunity is designated as a Service-Disabled Veteran-Owned Small Business set-aside under NAICS code 332323. Interested parties must submit their responses by November 5, 2026, at 3:00 PM. The contract focuses on ensuring the security and durability of the facility's perimeter through the procurement of specialized, high-grade fencing hardware.

241-NETWORK Contract Office 01 (36C241)

POSTED

DEADLINE

Custom Schedule 40 Steel Gate Fabrication

POSTED

DEADLINE

Custom Decorative Guardrail SystemsThis subcontract involves the fabrication and installation of custom decorative guardrail systems for prime contractors working on City of Danville Riverfront Park projects. The scope of work includes the production of steel posts and rails, the integration of stainless steel mesh infill panels, and the execution of core drilling into existing walls with a six-inch embedment utilizing non-shrink epoxy grout to ensure a fully installed and aligned system. Compliance requirements are strict, necessitating full adherence to OSHA safety standards and mandatory background certifications for all employees, specifically requiring no felony convictions within the last seven years. Interested parties must respond by November 17, 2026, to provide these specialized fabrication and installation services within the City of Danville.

POSTED

DEADLINE

IFB-26-27-031-Riverfront Park Guardrail and Fence Improvements

Solicitation # IFB-26-27-031

The City of Danville, Virginia, is soliciting bids under IFB-26-27-031 for the construction of decorative guardrail and fence improvements at Riverfront Park, specifically near the Martin Luther King Jr. Memorial Bridge. The scope of work includes the installation of custom fabricated decorative guardrails with steel posts and stainless steel mesh infill panels, as well as a 48-inch-high decorative welded-wire fence system. Key technical requirements include core drilling with a minimum 6-inch embedment using non-shrink epoxy grout, site restoration including grading and mulch replacement, and final alignment of all components. The project must be completed within 60 consecutive calendar days from the Notice to Proceed. The contract will be awarded to the lowest responsible and responsive bidder, with consideration also given to the proposed completion time. Bidders must provide a 5% bid bond, and the successful contractor must provide performance and payment bonds for 100% of the contract amount. A 5% retainage will be withheld from each invoice until final acceptance. Compliance requirements include adherence to OSHA safety standards, non-discrimination policies, and a mandatory employee background certification stating that staff have not been convicted of a felony in the past seven years. Bids must be submitted by November 17, 2026, via the eVA portal or as a sealed paper submission.

POSTED

DEADLINE

Metal Beam Guardrail Material SupplierThis subcontract opportunity is for a Metal Beam Guardrail Material Supplier to provide galvanized steel beam rails, steel posts, and specialized mounting hardware for prime contractors working on Texas Department of Transportation projects within the Paris District. The selected supplier is responsible for the procurement or fabrication of these components and must ensure all materials strictly adhere to TxDOT approved product lists and specifications. The scope of work includes the delivery of all required guardrail materials directly to project sites or designated staging areas located in Lamar County, Texas. Interested parties must submit their responses by November 19, 2026, to support these highway infrastructure projects.

Texas Department of Transportation

POSTED

about 23 hours ago

DEADLINE

in 22 days

AI Contract Overview

The contract involves the design and development of recreational trail amenities, specifically focusing on interpretive signage, wooden boardwalks, benches, and safety features. It aims to enhance the overall trail experience by incorporating strategically designed elements that both inform and provide comfort to trail users while ensuring their safety. The project is managed by the Connecticut Department of Administrative Services (DAS Procurement) and is categorized under NAICS code 332323. This subcontract opportunity was posted on May 15, 2026, with a deadline for responses set for June 1, 2026. While specific location details for the place of performance and agency office are not provided, interested parties can access additional information through the DAS portal. The contract does not specify any set-aside type or particular organization type requirements, indicating it is open to qualified entities capable of delivering quality design services for the trail features.