Synopsis of the proposed dredging - Red Hook Flats Anchorage, New York Harbor, Federal Navigation Project The New York District of the U.S. Army Corps of Engineers (Corps) proposes to perform maintenance dredging of the Red Hook Flats Anchorage, New York Harbor, Federal Navigation Project. The sediment from this project was tested and meets the criteria for remediation material at the Historic Area Remediation Site (HARS) and is therefore proposed to be placed at the HARS. The proposed maintenance dredging would remove up to approximately 793,000 cubic yards of sediment (approximately 104,000 cubic yards as basic work, and the remaining 689,000 cubic yards as options), subject to the availability of funds. Dredging in the project work areas will be required to depths of 35, 40, and 45 feet below Mean Lower Low Water (MLLW) with 2 feet allowable over-depth, in their respective reaches. The proposed work in Red Hook Flats Anchorage can be performed by a large mechanical dredge, hopper dredge, or similar plant. The proposed work may be required to be performed with a large mechanical dredge having a closed environmental clamshell bucket, but can also be performed with a hopper dredge if allowed by the state water quality certificate. Additionally, multiple barges and tug boats may be needed to perform the work during dredging, transport and placement of the dredged material. This solicitation is subject to FAR Part 14 sealed bidding procedures and is UNRESTRICTED and open to all prospective bidders. All bids must be received on time to be considered. The IFB will be evaluated based on price with award being made to the lowest responsible bidder. The applicable NAICS Code is 237990 and the small business standard size is $20.0 million. The contractor will be required to commence work within five (5) calendar days after the date of receipt of the Notice to Proceed. The estimated range for this project is $7,500,000 and $12,500,000. The contractor will be required to prosecute said work diligently and to complete the basic work ready for use not later than thirty (30) calendar days after the receipt by him of the notice to proceed for the basic work. There are two (2) options to the contract. If the options are exercised, their performance periods will be consecutive. The time for contract completion of each option will be determined by allowing a rate of one calendar day for each 6,000 cubic yards removed. The contractor is required to maintain an integrated production of at least 6,000 cubic yards per calendar day. Large business concerns must submit as part of their bid a subcontracting plan for this project in accordance with FAR Clause 52.219-8 and FAR Clause 52.219-9. Failure to submit an acceptable subcontracting plan may make the bidder ineligible for award of the contract. Small Business Goals: If a large business, the prime contractor shall provide its small business subcontracting plan conforming to the requirements of FAR 19.704 and DFARS 219.7. The small business subcontracting goals for USACE New York District are as follows: Small Business 50.0%, Small Disadvantaged Business 17.0%, Women-Owned Small Business 18.0%, HubZone Small Business 10.0%, Veteran Owned Small Business 4.0% and Service Disabled Veteran Owned Small Business 4.0%. A subcontracting plan reflecting goals less than indicated, shall provide, as part of the subcontracting plan submission, those extenuating circumstances of why the goal cannot be met. You may contact the District, Deputy of Small Business or your local SBA for assistance. A contract will not be awarded until the Contracting Officer has determined that the subcontracting plan provides maximum practicable opportunities for Small Business, Small Disadvantaged Business, Veteran-Owned Small Business, Service Disabled Veteran-Owned Small Business, HubZone Small Business and Women-Owned Small Business program concerns to participate in contract performance. The media selected for issuance of Synopsis/Solicitation and amendments shall solely be at the discretion of the Government; accordingly, the media utilized for this project shall be the internet. Paper copies of this solicitation and amendments, if any, will not be available or issued. In accordance with DFARS 252.204-7007, all vendors who want access to the solicitation must be registered with System for Award Management (SAM), located at https://www.sam.gov/portal/public/SAM/ and Federal Business Opportunity (FedBizOpps), located at http://www.fbo.gov, in order to safeguard acquisition-related information for all Federal Agencies. Interested parties may download and print the solicitation at no charge from the FedBizOpps website http://www.fbo.gov. Some contractor tools are as follows: 1. Register to receive Notification, and 2. Subscribe to the Mailing List for specific solicitations at Federal Business Opportunities (www.fbo.gov) or utilize the Vendor Notification Service in ASFI (https://www.acquisition.army.mil/asfi). FedBizOpps directs vendors to hyperlinks for Federal Business opportunities, such as solicitations, plans, specifications, and amendments. Check www.fbo.gov frequently for information and updates. Project specification files and drawings are portable document files (PDF). The Office of the Under Secretary of Defense (Acquisition Technology & Logistics (OUSD{AT&L}) A Guide to Collection & Use of Past Performance Information dated 2003 and FAR Part 36 requires the collection and use of past performance information (PPI) in acquiring best-value goods and services. FAR Subpart 36.3 and DFARS Subpart 236.2 mandate the use of Construction Contractor Appraisal Support System (CCASS) by all DoD agencies for construction contracts greater than or equal to $650,000 or more than $10,000 if the contract was terminated for default. CCASS is a module of the Contractor Performance Assessment Reporting System (CPARS) and is located at: https://www.cpars.csd.disa.mil. More definitive guidance and instructions will be incorporated in the solicitation and resultant contract. Point of Contact is Lisa Assim, Contract Specialist, US Army Corps of Engineers, New York District, 26 Federal Plaza, Room 1843, New York, 10278-0090 Phone:
+1 (555) 000-0000 Fax:
+1 (555) 000-0000 Email:
contact@example.gov.
