This Government Contract opportunity from Department Of Defense was posted on August 5, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Reel Assembly Manufacturing and Supply

Closed

Federal

Submission Closed08/17/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE7M1-26-Q-1485

Solicitation SPE7M1-26-Q-1485 is a Request for Quotation issued by DLA Land and Maritime for the procurement of two Axial Piston Pumps, identified by NSN 4320-01-542-3655. This is a Firm Fixed Price contract with a delivery requirement of 100 days after the date of order. The items are to be shipped FOB Origin to DLA Distribution San Joaquin in Tracy, California, where both inspection and acceptance will take place. Award will be based on the best value to the government, evaluating past performance, offered delivery, and price. The contractor must adhere to strict technical and quality requirements, including the removal of government identification from non-accepted supplies and a prohibition on the intentional use of mercury or mercury-containing compounds, except where functionally required. Packaging must comply with MIL-STD-2073-1E and RP001 for palletization, while marking must follow MIL-STD-129. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The solicitation also incorporates various FAR and DFARS clauses regarding cybersecurity, safeguarding covered defense information, and trade preferences.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE8EE-26-T-2368

Solicitation SPE8EE-26-T-2368 is a small business set-aside request for quotations issued by DLA Troop Support for the procurement of six hose reel frames, identified as critical application items. The required hardware consists of blank drumskins without predrilled holes, except for 28 holes with a 0.128 diameter that include pilot holes for ten dimpled holes, which must be match drilled at the next higher assembly. The items are associated with NSN 4930-01-515-1356 and part number 149D4000 from Mission Systems Davenport Inc. Delivery is required within 30 days after receipt of order, with shipping terms set as FOB Origin and delivery to DLA Distribution Jacksonville. Packaging must adhere to ASTM D3951 and RP001, while marking and labeling must comply with MIL-STD-129. Inspection and acceptance will occur at the destination. The procurement is governed by NAICS code 333914 and prohibits the use of additive manufacturing for the produced items. Payment and invoicing are to be processed through the Wide Area WorkFlow system.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Centrifugal Pump Unit Supplier

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

LOP Fire Protection and Unwatering Pump System

Solicitation # W9127N26QA155

Solicitation W9127N26QA155 is a total small business set-aside for the procurement of a new fire protection and unwatering pump system for the Lookout Point Powerhouse in Lane County, Oregon. Issued by the Department of Defense through the Army Corps of Engineers Portland District, the project is critical because a deep drawdown of the reservoir would otherwise disable essential service water and fire protection systems. The requirement is for a firm-fixed-price purchase order to provide various equipment, including a 650 GPM vertical pump/motor assembly, a 0.25 HP jockey pump system, a fire pump controller panel, a manual transfer switch, and associated piping, valves, and overload protection. All equipment must meet AWWA E103 and HI 9.1-9.5 standards, with final acceptance based on HI ANSI/HI 14.6 grade 2B requirements. The procurement process included three amendments that revised the statement of work, updated the NAICS code to 333914, deleted CLIN 0032, and extended the response deadline to September 14, 2026. Award will be based on technical compliance, past performance, and price, with a preference for HUBZone firms. The successful contractor must deliver all equipment to the Lowell, Oregon facility on or before March 1, 2027, and is responsible for all transportation costs. Compliance with various FAR and DFARS clauses is required, including Buy American certifications, cybersecurity standards under DFARS 252.204-7012, and strict adherence to MIL-STD-129 for shipment marking.

POSTED

DEADLINE

Solicitation # N0010426QBQ38

This solicitation is for the procurement of dirt deflectors under a small-business set-aside, with a response deadline of September 17, 2026. The contract is a fixed-price agreement for supplies delivered FOB-destination, requiring compliance with specific technical documentation, including Individual Repair Part Ordering Data (IRPOD) and various military specifications. Pricing for quotations is generally valid for 60 days following the closing date. Key requirements include strict adherence to the established order of precedence for technical documents and the prohibition of mercury in hardware. Contractors must maintain an acceptable inspection system and follow detailed packaging and cleanliness standards, such as MIL-PRF-23199. Deliverables include a Certificate of Compliance and a cure date certificate submitted at the time of material delivery. The contract also mandates cybersecurity maturity model certification and adherence to specific distribution statements for the safeguarding of technical data.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

120,000-GALLON FUEL SYSTEM SUPPLY POINT (FSSP), Navy Variant

Solicitation # N3943026Q0004

Navfac Systems And Experimental Warfare Ctr

POSTED

DEADLINE

43--PUMP UNIT,CENTRIFUGAL

Solicitation # SPE7M1-26-Q-1479

This solicitation, numbered SPE7M1-26-Q-1479, is issued by the Department of Defense Maritime Supply Chain for the procurement of 30 centrifugal pump units under NSN 4320-01-422-0469. The contract is designated as a Women-Owned Small Business Set-Aside under NAICS code 333914. Delivery is required within 30 days after order, with the destination and acceptance point located at the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The agreement incorporates several technical and quality requirements, including DLA packaging standards, the removal of government identification from non-accepted supplies, and a strict prohibition on the use of Class I ozone-depleting chemicals. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129. Additionally, the contract mandates compliance with DFARS clause 252.204-7012 regarding the safeguarding of covered defense information. Approved manufacturers and part numbers include entities such as Ampco Pumps Company LLC and Parker Hannifin Corporation.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Reciprocating Hydraulic Pump Assembly Supplier

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of Hydraulic Ram Hand Pumps (NSN 4320004923727)

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of Carver Pump Company Critical Application Item

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of Critical Application O-Rings

POSTED

DEADLINE

Supply of Hydraulic Ram Pumps (NSN 4320-00-911-5679)

MARITIME SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 9 days

AI Contract Overview

The contract requires the manufacture and delivery of 20 static discharge reel assemblies conforming to Hannay Reels MRGR75-50 specifications, with a left-side crank configuration as the designated design feature. All units must meet the technical and quality standards established by the Defense Logistics Agency to ensure operational reliability and uniformity across military applications. The assemblies are to be produced and delivered in full compliance with applicable DLA quality assurance protocols, emphasizing precision engineering and material integrity throughout the production process. The solicitation, titled Reel Assembly Manufacturing and Supply, was posted on August 5, 2026, with a response deadline of August 17, 2026, and is classified as a subcontract under NAICS code 333914 for Other Commercial and Service Industry Machinery Manufacturing. Performance is designated for New Cumberland, Pennsylvania, with a ZIP code of 17070-5002, indicating the primary site for delivery or final inspection. The contract is administered by the Department of Defense under the organization name Construction & Equipment Manu & Con, and all proposals must be submitted via the DIBBS portal using the provided identifier SPE8EE26T2255.

General Info

Manufacture and deliver 20 Hannay MRGR75-50 static discharge reels with left crank, per DLA specs, to New Cumberland, PA.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CONView Agency

NAICS

333914 - Measuring, Dispensing, and Other Pumping Equipment ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE8EE-26-T-2255.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

REEL ASSEMBLY, STATI

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedAug 5

subcontract

Response DeadlineAug 17

Deadline has passed

Submission Closed

08/17/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Manufacture and delivery of 20 static discharge reel assemblies per Hannay Reels MRGR75-50 specifications, including left-side crank configuration and compliance with DLA technical and quality standards.