REEL, CABLE

REEL,CABLE
REEL,CABLE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT
DLA DURING "OPEN SOLICITATION ONLY".
TO RECEIVE A COPY OF THE DRAWING(S)<(>,<)>
FOR EBS SOLICITATIONS USE URL
HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
TDP Rev A Gen 1 IAW BASIC DRAWING NR 80063 SC-D-108721 REVISION NR P DTD 10/28/1987 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 80063 SC-C-108725
SPE8ED-27-T-0198
SECTION B
REVISION NR A DTD 08/03/1964
PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 80063 SC-C-108735 REVISION NR E DTD 10/05/1984 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 80063 SC-B-108723 REVISION NR E DTD 10/04/1984 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 80063 SC-B-108727 REVISION NR D DTD 10/03/1984 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 80063 SC-B-108729 REVISION NR G DTD 02/27/1985 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 80063 SC-B-108732 REVISION NR D DTD 10/04/1984 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 80063 SC-C-108722 REVISION NR C DTD 10/03/1984 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 80063 SC-C-108724 REVISION NR B DTD 10/04/1984 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 80063 SC-C-108731 REVISION NR D DTD 07/25/1984 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE SPEC NR MIL-DTL-14072G REVISION NR G DTD 05/17/2021 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018991052 0001 EA 2.000
NSN/MATERIAL:8130006561090
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
SPE8ED-27-T-0198
SECTION B
PR: 7018991052 PRLI: 0001 CONT’D
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W905UH
W8SC MD ARNG FMS 5
BLDG E4306 EDGEWOOD ARMORY
ABERDEEN PROVING GROU MD 21010-5401
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W90PWG
0111 AV BN 01 CO F AIR TRAFFI
EDGEWOOD ARMORY EDGEWOOD AREA
BLDG E4305 SIXTH STREET
GUNPOWDER MD 21010-5401
US
MARKFOR
W90PWG
0111 AV BN 01 CO F AIR TRAFFI
EDGEWOOD ARMORY EDGEWOOD AREA
BLDG E4305 SIXTH STREET
GUNPOWDER MD 21010-5401
US
M/F: (TCN) W90PWG63010004
RDD:
PROJ: TP 3
SUPP ADD: W23R7B SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 13
DIC: A3A DIST: ADV: FC: RL
Need Ship Date:00/00/0000 Original Required Delivery Date:11/02/2026
SPE8ED-27-T-0198 NSN/Part Number: 8130-00-656-1090 Quantity: 2 EA Purchase Request: 7018991052QTY: 2 Delivery: 20 days ADO