Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Refrigeration System Inspection and Commissioning

Active

Response Deadline08/17/2026, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the post-installation inspection and commissioning of new refrigeration doors to ensure temperature integrity, system performance, and seamless integration into existing refrigeration infrastructure. The work requires verification that the installed doors maintain optimal thermal efficiency, operate without leaks or malfunctions, and are properly synchronized with controls and monitoring systems. All tasks must align with industry standards for cold chain reliability and safety, with documentation provided to confirm compliance and operational readiness. This is a subcontract under a Small Business Set-Aside, open exclusively to SBA-certified entities including Small Businesses, Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, Veteran-Owned Small Businesses, and Service-Disabled Veteran-Owned Small Businesses. The NAICS code 541330 indicates technical consulting services related to engineering and scientific evaluation. The solicitation was posted on August 4, 2026, with a response deadline of August 17, 2026, and the place of performance is unspecified, though the point of contact and agency location are tied to Management & Training Corporation. Submission must occur through the designated SBA opportunity portal.

General Info

Post-installation inspection and commissioning of refrigeration doors for cold chain compliance under Small Business Set-Aside.

Agency

Management & Training CorporationView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

WV, US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 4

subcontract

Response DeadlineAug 17

Submission deadline

Response Deadline

08/17/2026, 12:00:00 AM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyManagement & Training Corporation

ContactsNo contacts available

OfficeN/A

Organization / Agency

Management & Training Corporation

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Post-installation inspection and commissioning to verify temperature integrity, system performance, and proper integration of new refrigeration doors.

Similar Contracts

Same NAICS industry code

Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide Construction Management services under an Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract to support major construction projects across various phases including planning, design, construction, and closeout. These services will encompass a range of delivery methods such as Design Build, Progressive Design Build, and other alternative project delivery formats, with the primary goal of ensuring projects adhere to authorized schedules, budgets, and quality standards. The contract is intended to streamline oversight and coordination for the Port’s extensive capital improvement initiatives, requiring technical expertise in managing complex infrastructure developments. Primary point of contact for this opportunity is Hala Rabbo, who can be reached via email or phone, with additional support available from Project Manager Ann Davidson. The solicitation is classified under NAICS code 541330, which designates architectural, engineering, and related services. Although the contract is currently posted as a forecast with no official solicitation number or set-aside details, interested parties are encouraged to monitor the provided UI link for updates and future formal solicitations. The performance location will be at various Port of Seattle facilities and project sites, with no specific city or state specified in the metadata, indicating broad geographic scope across Port operations.

Construction Management

POSTED

about 5 hours ago

DEADLINE

SEEKING QUALIFIED SUBCONSULTANTS IN RIVERSIDE COUNTY/SOCAL TO SUPPORT WELL REPLACEMENT PROJECT WITH WATER DISTRICT

Solicitation # seeking-qualified-subconsultants-riverside-countysocal-support-well-replacement-project-water

GHD Inc. is inviting qualified firms including Disadvantaged Business Enterprises, Small Business Enterprises, Women-Owned Business Enterprises, and Minority-Owned Business Enterprises to submit qualifications for participation in the Corydon Well Replacement Design Project in Riverside County, California, on behalf of the Elsinore Valley Municipal Water District. The scope of work encompasses a broad range of professional services such as engineering, environmental assessment, surveying, geotechnical analysis, permitting, public outreach, and utility location, with applicable NAICS codes covering architecture and engineering, construction, and related consulting activities. The solicitation is targeted toward small and disadvantaged businesses under SBA set-aside categories including Small Business, Small Disadvantaged Business, Women-Owned Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business, with additional alignment to DBE requirements under the Department of Transportation guidelines. Interested firms must contact Charlie Brown at charles.brown@ghd.com by August 7, 2026, to request solicitation materials and submit their qualifications, with all submissions due no later than 5 p.m. PST on August 14, 2026, and the final proposal deadline set for September 15, 2026.

POSTED

about 5 hours ago

DEADLINE

in about 1 month

Engineering Design Services

Solicitation # TPJCC Engineering Design Services 26-17

The contract is a solicitation for engineering design services to install a Viking Norsafe E-60 Conventional Lifeboat Davit on Pier 7 at the Tongue Point Job Corps Center in Astoria, Oregon, operated by Management & Training Corporation (MTC). The work requires a Professional Engineer with a valid license to produce signed and stamped engineering drawings, structural calculations, material specifications, and a bill of materials, along with electronic PDF copies and one full-size drawing set. All deliverables must meet MTC’s specifications and be of merchantable quality, free from defects, and constructed with good workmanship. The contract is a fee-for-service subcontracting opportunity under NAICS Code 541330 for engineering services, with a size standard of $9 million in annual revenue. It is set aside for small business categories including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business, and all subcontractors must self-certify their eligibility under FAR 52.219-8 and obtain a Unique Entity Identifier and Taxpayer Identification Number. The solicitation requires submission via email to Elizabeth Williamson by 2:00 PM PST on August 6, 2024, and mandates inclusion of a completed bid sheet, W-9, Self-Certification Form, and Acceptance of Terms & Conditions. Invoices must reference the purchase order number, service dates, itemized pricing with extended unit costs and totals, and include an invoice number and date, and payment is contingent upon delivery and acceptance of services. The contractor is obligated to indemnify MTC for all liabilities arising from performance, negligence, or contract breach, and must comply with labor standards including the Federal Contractor Minimum Wage and Wage Determination SCA WD 2015-5577 Rev. 28. Contractors and subcontractors must adhere to federal data protection requirements, including encryption and one-hour reporting of any privacy breaches involving personally identifiable information, and are prohibited from retaining or disseminating data covered under the Privacy Act or FOIA exemptions. The contract is subject to FFATA reporting if the value exceeds $40,000, and first-tier subcontractors over $30,000 must disclose debarment status. Insurance is not required, but MTC retains inspection rights at all reasonable times, and the contract may be terminated with 30 days' written notice or immediately if government funding

Tongue Point Job Corps

POSTED

about 5 hours ago

DEADLINE

Corydon Well Replacement (C2305)

Solicitation # C2305

Ardurra Group, Inc. is soliciting proposals from Disadvantaged Business Enterprise (DBE) firms for professional design, bidding support, and engineering services during construction for the Corydon Well Replacement Project in California, under solicitation number corydon-well-replacement-c2305-1. The project involves designing a new municipal groundwater production well to replace and decommission the existing Corydon well, with work divided into two phases: Phase 1 focuses on technical specifications, civil site design, and line-bid items for drilling and abandonment, including full-time on-site construction management oversight in compliance with Riverside County and California State Water Resources Control Board standards; Phase 2 covers detailed design of architectural, structural, mechanical, electrical, and instrumentation systems for equipping, testing, and commissioning the new well. Key deliverables include a Preliminary Design Report at 30% design completeness, review of up to 200 shop drawings and material submittals, assistance with the Domestic Water Supply Permit Amendment, and development of record drawings reflecting field changes. The design must adhere to AWWA standards for a 24-inch stainless steel Ful-Flo louvered screen, match existing vertical turbine pump applications, and tie discharge piping into the Corydon Blend station and Malaga blending location. The contract is set aside for small businesses including SB, SDB, WOSB, VOSB, SDVOSB, and DBE entities under SBA programs, and requires full compliance with Buy America and Build America Buy America Act provisions, including domestic content certifications and waiver procedures for non-compliant materials. Proposals must include detailed cost breakdowns by task, hourly rates, travel, and incidental charges, with a total estimated project cost of $2,260,788, though the final professional services fee is subject to negotiation. Evaluation is weighted with 25% each for relevant qualifications and understanding of the project, 20% for schedule and scope clarity, 10% for innovation, 10% for cost value, and 10% for overall proposal quality, with award based on demonstrated competence rather than lowest price. Required submissions include certifications for debarment, lobbying, American Iron and Steel compliance, Executive Order N-6-22, conflict of interest, insurance, public works registration, and detailed DBE subconsultant information. All proposals must be submitted via EVMWD’s PlanetBids portal by 10:00 a.m.

Ardurra Group, Inc.

POSTED

about 5 hours ago

DEADLINE

Corydon Well Replacement Project - Professional Design, Bidding Support, Engineering Services During Construction

Solicitation # corydon-well-replacement-project-professional-design-bidding-support-engineering-services-during-0

The Corydon Well Replacement Project, managed by the Elsinore Valley Municipal Water District, seeks professional design, bidding support, and ongoing engineering services during construction for a critical water infrastructure upgrade in Lake Elsinore, California. The solicitation, designated as C2305, requires a qualified firm to provide comprehensive engineering expertise spanning the full project lifecycle—from initial planning and design through bid evaluation and field support during construction. The work is classified under NAICS code 541330 and is set aside for Disadvantaged Business Enterprises under Department of Transportation guidelines, prioritizing participation by certified DBEs. The contract opportunity was posted on August 4, 2026, with responses due by September 1, 2026, and is being administered by AKM Consulting Engineers, with Katie Neubauer serving as the primary point of contact for inquiries. The project aims to enhance local water system reliability through the replacement of the Corydon Well, ensuring compliance with regulatory standards and efficient delivery of services to the community.

AKM Consulting Engineers

POSTED

about 5 hours ago

DEADLINE

Corydon Well Replacement Project – Professional Design, Bidding Support and Engineering Services During Construction

Solicitation # WO# C2305

The Corydon Well Replacement Project involves the design and construction support for a new municipal groundwater production well to replace and permanently abandon the existing Corydon Well, located on Elsinore Valley Municipal Water District property in California. The scope encompasses comprehensive engineering services across two phases: Phase 1 includes hydrogeological evaluation, aquifer analysis, well design aligned with AWWA standards, civil and mechanical site planning, wellhead and facility design, bidding assistance, and full-time construction management with hydrogeological oversight during drilling; Phase 2 covers detailed architectural, structural, electrical, mechanical, and instrumentation and controls design for well equipping, testing, and commissioning, along with continued engineering support during construction. All work must comply with Riverside County and California State Water Resources Control Board regulations, including proper casing depth, sanitary seal placement, and abandonment protocols. The project is subject to the Buy America Act and Build America, Buy America requirements, mandating domestic sourcing of iron, steel, and manufactured products, with certification and documentation requirements enforced through subcontracts exceeding $150,000. The project is funded partially by a $400,000 Bureau of Reclamation grant, with the remainder covered by non-federal sources, necessitating full compliance with 2 CFR Part 200, including audit rights, debarment and suspension checks, and lobbying restrictions. Proposals must include detailed cost breakdowns by task, hourly rates, travel, and incidental charges, capped at a not-to-exceed amount of $1,000,000. Evaluation prioritizes demonstrated qualifications and experience in municipal groundwater projects, technical understanding of the scope, realistic scheduling, innovation, and overall proposal quality, with cost being a secondary consideration. All respondents must provide certifications for non-collusion, American Iron and Steel compliance, debarment/suspension status via SAM, DBE participation, public works registration, insurance acknowledgment, and Executive Order N-6-22 compliance, along with resumes of key personnel and proof of California professional licensure. Work is scheduled to begin in November 2026 and conclude by May 2028, with monthly invoicing and progress reporting required, subject to 45-day payment terms. Subconsultants must be certified and disclosed, and the project emphasizes outreach to small, disadvantaged, women-owned, and minority-owned businesses. Proposals must be submitted via the PlanetBids portal by September 1, 2026, and include all mandatory attachments and forms

GEI Consultants, Inc.

POSTED

about 5 hours ago

DEADLINE

On-Call Pavement Preservation Engineering Services

Solicitation # 26085

The City of Bellevue Transportation Department is seeking qualified consulting firms to provide on-call engineering services focused on pavement preservation, covering civil engineering, geotechnical engineering, and survey/geomatics support. This solicitation, numbered 26085, is open for responses until August 25, 2026, with proposals due by 9:00 PM Pacific Time. The services will be performed within the state of Washington and are intended to support the City's infrastructure maintenance and improvement efforts. Interested firms must demonstrate expertise in pavement analysis, design, and related fields to be considered for inclusion on the on-call list. The primary point of contact for inquiries is Kelli Hoel, reachable via email at khoel@bellevuewa.gov or by phone at (425) 452-4378. The solicitation is posted on the City’s public procurement portal and is open to all eligible firms without specific set-aside provisions.

City of Bellevue

POSTED

about 6 hours ago

DEADLINE

26RFSQ69 Engineering Development Services

Solicitation # 26RFSQ69

Williamson County is seeking qualified engineering firms to provide specialized support for the review of third-party developer submissions and quality assurance activities related to plat and driveway permits, FEMA Flood Plain Program administration, and drainage and hydrologic/hydraulic engineering analyses. This engagement is specifically limited to evaluating designs created by external developers and does not encompass original infrastructure design work such as roadway or drainage conveyance design for county projects. The work will support multiple county divisions including Road and Bridge, Development Services & Drainage, and County Facilities, particularly in connection with projects funded through the County’s Road Bond Program. The County anticipates selecting approximately three firms but reserves the right to choose more or fewer based on evaluative criteria and operational needs. Firms interested in this opportunity must submit qualifications in response to solicitation number 26RFSQ69, with proposals due by August 18, 2026. The solicitation was posted on August 4, 2026, and all submissions must be directed to Williamson County in Georgetown, Texas. Primary points of contact for inquiries are Sandra Malcolm and Joy Simonton, with Kerstin Hancock available as a secondary contact. This contract does not involve direct construction or county-led engineering design and is strictly focused on third-party design review and compliance verification. Participation is open to firms capable of demonstrating expertise in the stated technical areas and an understanding of local regulatory frameworks and development processes in Williamson County.

WILLIAMSON COUNTY

POSTED

about 7 hours ago

DEADLINE

REQUEST FOR PROPOSALS FOR ENGINEERING SERVICES

Solicitation # PE-60900-NONST-2026-000000009

The Fitzgerald and Ben Hill County Regional Solid Waste Management Authority is seeking qualified engineering firms to provide comprehensive services for the closure of its Municipal Solid Waste and Construction & Demolition landfill units, with funding sourced through the Georgia Environmental Finance Authority. The scope of work includes site assessments, geotechnical investigations, surveying, regulatory permitting, engineering design, construction documentation, bid document preparation, construction administration, quality assurance and control, as-built drawings, post-closure reporting, and final project closeout. Selection will prioritize firms with demonstrated experience in similar landfill closure projects, and all contracts must comply with Georgia Environmental Finance Authority requirements. Proposals must be submitted by 2:00 PM on Tuesday, September 8, 2026, and delivered exclusively to the Ben Hill County Board of Commissioners at 212 E Central Street, Fitzgerald, GA 31750, addressed to County Manager Hampton Raulerson; any proposals received at other locations or after the deadline will be rejected. Interested firms must contact Lindsay Ray at the Southern Georgia Regional Commission to request the full Request for Proposals, Statement of Qualifications Form, and scoring criteria. The Ben Hill County Board of Commissioners retains the authority to accept or reject any proposal and to waive minor procedural irregularities. The solicitation number is PE-60900-NONST-2026-000000009, and additional information can be accessed through the provided state portal link.

Ben Hill County Board of Commissioners

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Annual Residential Rehabilitation Project (Phase 2D)

Solicitation # 20260803047

The City of Compton Public Works Department is soliciting bids for the Annual Residential Rehabilitation Project Phase 2D under solicitation number 20260803047, with a response deadline of August 28, 2026. The project is classified under NAICS code 541330 and is designated as a SLED procurement, indicating state, local, or educational government involvement. The work will be performed in Compton, California, with a zip code of 90220, and is aimed at rehabilitating residential properties within the city limits. The primary point of contact for inquiries is John D. Strickland, Jr., reachable at 310-605-5505. Bidders must submit their proposals through the designated online portal prior to the deadline to be considered for award.

City of Compton Public Works Department

POSTED

about 8 hours ago

DEADLINE

Road Repair Services Project Construction Management & Inspection Services

Solicitation # 20260803045

The City of Compton Public Works Department is seeking qualified contractors to provide construction management and inspection services for road repair projects under solicitation number 20260803045, with a contract value of $18. The solicitation was posted on August 4, 2026, and responses are due by August 21, 2026. This opportunity falls under NAICS code 541330, categorized as a state, local, or educational government procurement, and is targeted for performance in Compton, California, with a zip code of 90220. The work involves overseeing and inspecting road repair construction activities to ensure compliance with specifications, standards, and timelines. John D. Strickland, Jr. serves as the primary point of contact for inquiries, reachable at 310-605-5505. There is no set-aside designation specified for this contract, meaning it is open to all eligible bidders regardless of business size or ownership classification. Interested parties must submit their proposals through the official portal at the provided link prior to the deadline. The project requires professional engineering and construction oversight to support the city’s infrastructure maintenance objectives, with all work expected to be conducted in adherence to local regulations and public safety protocols.

City of Compton Public Works Department

POSTED

about 8 hours ago

DEADLINE

Feasibility Study For Development Of An Additional Water Supply Source Interconnection To Azusa Light & Water Water Division

Solicitation # 20260803042

Azusa Light & Water is seeking proposals for a feasibility study to evaluate the development of an additional water supply source and its interconnection to the existing water division infrastructure. The solicitation, numbered 20260803042, was posted on August 4, 2026, with a response deadline of August 28, 2026, and carries a contract value of $18. The effort falls under NAICS code 541330, indicating it involves engineering services, and is classified as a state, local, or educational (SLED) procurement led by the California agency. All work is to be performed in Azusa, California, with a zip code of 91702. Primary point of contact for inquiries is Terry Kerger, reachable via phone at 626-633-4111 or email at waterengineering@azusaca.gov. No specific set-aside provisions are identified for this solicitation.

Azusa Light & Water

POSTED

about 8 hours ago

DEADLINE

More opportunities from Management & Training Corporation

Same awarding agency

Supply of Commercial Walk-In Refrigeration Doors and ComponentsThe contract seeks the supply of three commercial-grade walk-in refrigeration doors complete with all necessary components including gaskets, hinges, latches, seals, and hardware, ensuring full compliance with manufacturer specifications and industry standards for commercial refrigeration systems. All components must meet rigorous performance and safety requirements to guarantee durability, energy efficiency, and proper sealing under continuous operational use in commercial environments. This is a subcontract under a Small Business set-aside program, open exclusively to SBA-certified small business categories including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business. The North American Industry Classification System code is 423730, indicating distribution of building materials and supplies for plumbing and heating equipment. The solicitation was posted on August 4, 2026, with responses due by August 17, 2026, and the performance location and point of contact information are not specified, though the opportunity is accessible via the SBA’s online procurement portal.

Warm Air Heating and Air-Conditioning Equipment and Supplies Merchant Wholesalers

POSTED

about 5 hours ago

DEADLINE

Walk-In Refrigeration Door ReplacementThe contract entails the full replacement of three walk-in refrigerator doors, covering complete removal of existing units, installation of new doors, and inclusion of all necessary components such as hardware, gaskets, hinges, and latches, along with all associated labor to ensure seamless operational integration. This project requires attention to detail in aligning the new doors with existing refrigeration systems to maintain temperature controls, energy efficiency, and structural integrity. The scope is comprehensive, leaving no aspect of the replacement process to be handled separately, ensuring a turnkey solution from start to finish. The solicitation is designated as a subcontract under the Small Business Administration’s set-aside programs, making it available exclusively to small businesses including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone-certified firms, Veteran-Owned Small Businesses, and Service-Disabled Veteran-Owned Small Businesses. It falls under NAICS code 238220, which pertains to plumbing, heating, and air-conditioning contractors, indicating the specialized nature of the required work. The opportunity was posted on August 4, 2026, with responses due by August 17, 2026, and is managed by the Management & Training Corporation, though specific location and point of contact details are not provided. The official portal for submission and further information is accessible through the SBA’s opportunity website.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 5 hours ago

DEADLINE

2026-Maui-Relocation of Cameras- REBID

Solicitation # 2026-maui-relocation-cameras-rebid

This contract opportunity, issued by Management & Training Corporation (MTC) as the operator of the Hawaii Job Corps Center on Maui, solicits bids for the relocation of eleven security cameras from Building 13 to new designated areas within the facility to enhance surveillance coverage and eliminate blind spots. The work must be completed within 120 consecutive business days after issuance of a Notice to Proceed and includes site assessment, planning, cabling or conduit installation, camera mounting, network and power connection, configuration, functional testing, verification of image quality and system performance, and submission of comprehensive documentation including as-built diagrams, updated surveillance maps, and maintenance instructions. The contract is a fixed-price lump sum arrangement, and bidders must submit a detailed cost breakout covering materials, labor with categories and rates, equipment, permits, bonds, subcontractor costs, overhead, and profit. A bid bond of 20% of the base bid is required if the bid equals or exceeds $25,000, along with performance and payment bonds at 100% of the contract amount, all issued through A-rated surety companies using standardized forms. Weekly certified payroll reporting is mandatory to ensure compliance with applicable wage determinations, and contractors must adhere to DOL records management and drug-free workplace requirements. The contract is subject to Federal Acquisition Regulation clauses related to small business representation, reporting of executive compensation and subcontract awards for contracts over $40,000, protection of government interests in subcontracting, rights in data, and SF-1413 acknowledgments. Bidders must be registered with a UEI and tax ID, and must certify they are not debarred or suspended by the federal government. The solicitation is set aside exclusively for small business categories including SDB, WOSB, HUBZone SB, VOSB, and SDVOSB, and all offerors must complete a physical site visit and submit a signed bid form along with the MTC Supplier Packet, including W-9 and acceptance of terms. All submissions are due by August 21, 2026, at 3:00 PM HST via email to designated MTC contacts. Final acceptance requires successful completion of a punch list process following substantial completion, and liquidated damages of $150 per calendar day apply for delays or unsatisfactory work. Ten percent retainage is held until substantial completion and acceptance, and the contractor must carry general liability insurance of $1 million per occurrence and $3 million aggregate, auto insurance

Security Systems Services (except Locksmiths)

POSTED

about 5 hours ago

DEADLINE

2026-Maui-Dorm Exhaust Fans

Solicitation # 2026-maui-dorm-exhaust-fans

This subcontracting opportunity with Management and Training Corporation (MTC) for the Hawaii Job Corps Center – Maui involves the removal and replacement of approximately 25 exhaust fans across three dormitories, with associated restoration, cleanup, and compliance tasks. The work requires complete dismantling and disposal of existing units per local regulations, installation of new approved fans with secure mounting and ventilation connections, repair or replacement of damaged drywall and plaster, repainting to match existing finishes, and thorough testing to ensure proper operation and airflow. Contractors must also provide two complete operation and maintenance manuals with manufacturer data, parts lists, and maintenance requirements, along with a minimum of two hours of on-site training for facility personnel. All work must adhere to MTC’s strict shipping instructions, standard commercial packaging practices, and federal and state building codes, with final acceptance contingent upon a punch list resolution and written notification by the contractor after all corrections are completed. The solicitation is restricted to small business set-asides, including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone, Veteran-Owned, and Service-Disabled Veteran-Owned Small Business, with NAICS code 238220 applicable. Bidders must submit a detailed cost breakout on contractor letterhead covering materials, labor with categories and rates, equipment, permits, disposal, testing, commissioning, bonds, subcontractor costs, overhead, profit, and other direct or indirect expenses. A signed MTC Bid for Lump Sum Contract form is mandatory, alongside a W-9, Supplier Self-Certification, and Terms & Conditions acceptance form. For bids equal to or exceeding $25,000, a 20% bid bond and 100% performance and payment bonds from an A-rated surety are required, along with proof of insurance: $1M per occurrence/$3M aggregate general liability with MTC named as additional insured, $1M auto liability, $500K worker’s compensation, and $1M/$3M professional liability if applicable. Compliance with federal wage requirements under Executive Order 13658, submission of weekly certified payroll reports, and posting of bilingual Davis-Bacon notices are mandatory. Contractors must conduct a physical site visit and sign an attendance roster prior to bidding, disclose any debarred first-tier subcontractors over $30,000, provide a Unique Entity Identifier (UEI), DUNS number, and nine-digit tax ID, and comply with data rights, executive compensation reporting, and strict information protection

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 5 hours ago

DEADLINE

RFQ#3857 Freezer Door Replacement

Solicitation # RFQ#3857

Management & Training Corporation is seeking qualified small businesses to submit proposals for the replacement of a freezer door at the Charleston Job Corps Center located in Charleston, West Virginia. This solicitation, designated as RFQ#3857, is specifically targeted toward small business set-asides including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business entities certified by the SBA. The NAICS code for this opportunity is 238220, indicating it falls under the specialty trade contracting category, likely involving mechanical or HVAC-related installation work. Proposals must be submitted by the deadline of August 17, 2026, with the solicitation officially posted on August 4, 2026. All work is to be performed on-site at the facility located at 1000 Curtis Price Way. For questions or additional information, interested parties should contact Wendy Lawrence, the primary point of contact, via phone at 801-693-2920 or email at wendy.lawrence@mtctrains.com.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 5 hours ago

DEADLINE

2026-Maui-HBI Classroom Repair

Solicitation # 2026- Maui- HBI Classroom Repair

This subcontracting opportunity with Management and Training Corporation (MTC) for the Hawaii Job Corps Center on Maui seeks bids for siding contractor services to repair the HBI North wall, including removal of existing siding, mitigation of lead-based paint hazards, repair or replacement of damaged studs, and installation of new siding matching the existing exterior. The project requires full compliance with state and federal regulations for hazardous waste handling and disposal, particularly concerning lead, and all work must be performed by qualified personnel trained in lead hazard remediation and safety protocols. The solicitation is set aside for small business categories including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone, Veteran-Owned, and Service-Disabled Veteran-Owned Small Business under NAICS code 238170, with bidders required to self-certify their business classification and provide UEI, DUNS, and Tax ID numbers. Bidders must complete and submit the MTC Supplier Packet, including W-9, Self-Certification, and Terms & Conditions acceptance forms, along with a detailed cost breakout covering materials, labor, equipment, fees, bonds, subcontractors, overhead, and profit, presented on company letterhead. A physical site visit and signature on an attendance roster are mandatory prior to bid submission, and a pre-construction meeting will be held after issuance of the Notice to Proceed to finalize staging and schedule. The contract is a fixed-price, single lump sum agreement with an estimated threshold for bonding at $25,000; bids above this amount require a 20% bid bond and 100% performance and payment bonds executed on AIA A-311/A-312 or SF25/SF25A forms through an A-rated surety company approved by MTC. Insurance requirements include workers’ compensation with $500,000 employer liability, general liability coverage of $1 million per occurrence/$3 million aggregate (with MTC as additional insured), and optional but recommended comprehensive automobile and professional liability coverage. Contractors must submit weekly certified payrolls, use AIA G702 and G703 forms for payment applications, and provide a Schedule of Values before the first invoice. Ten percent retainage is withheld until substantial completion and acceptance. Liquidated damages of $150 per day apply for delays, and contractors must submit Safety Data Sheets for all hazardous chemicals used. Final inspection and acceptance occur at the MTC-designated location, with all materials and work required to be merchantable

Siding Contractors

POSTED

about 5 hours ago

DEADLINE

2026-Nalo-Concrete Patching and CMU Wall Repair

Solicitation # 2026- Nalo- Concrete Patching and CMU Wall Repair

This subcontracting opportunity issued by Management and Training Corporation (MTC) for the Hawaii Job Corps Center in Waimanalo seeks bids for concrete patching and CMU wall repair services under a fixed-price lump sum contract. The scope includes demolition and removal of approximately 230 linear feet of failing CMU wall and associated debris disposal, installation of a new 8-foot-high galvanized chain-link fence with steel posts in concrete footings, repair and replacement of 168 square feet of concrete walkway, structural repair of a 4-linear-foot stairwell corner, and removal and regrading of 150 square feet of uplifted concrete slab to ensure proper drainage. All work must comply with federal, state, and local regulations including HUD, EPA, OSHA, DOT, and HIOSH standards, and includes a one-year workmanship warranty. The solicitation is restricted to small business categories including SBA-certified Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business under NAICS code 238140. Bidders must have completed three comparable projects and submit detailed cost breakdowns covering materials, labor, equipment, permits, disposal, bonds, subcontractors, overhead, and profit on contractor letterhead. A mandatory physical site visit and signature on an attendance roster are required before bid submission. Proposals must be submitted via email by 3:00 PM HST on August 28, 2026, and include completed MTC Supplier Packet forms, W-9, SF 1413 Statement and Acknowledgement, and UEI, DUNS, and Tax ID numbers. Performance and Payment Bonds are required for bids $25,000 or more, issued in MTC’s name at 100% of the contract value using AIA A-311, AIA A-312, SF25, or SF25A forms, with sureties holding at least an A rating; letters of credit are not accepted. Bidders must also provide Safety Data Sheets for all hazardous chemicals and comply with Davis-Bacon Act wage requirements, submitting weekly certified payroll reports as a condition of payment. Payments will be made upon submission of AIA G702/G703 pay applications with 10% retainage held until substantial completion and acceptance. Final payment requires submission of a Notice of Final Completion,

Masonry Contractors

POSTED

about 5 hours ago

DEADLINE

Project Management and Compliance AdministrationThe contract encompasses comprehensive project management and compliance administration for a subcontracted work scope requiring strict oversight of subcontractors and adherence to federal labor standards under the Davis-Bacon Act, including the preparation and submission of certified payroll reports. Bonding requirements are integral to the agreement, ensuring financial accountability and project protection. Coordination is mandated with MTC procurement teams and on-site staff to align subcontractor activities with overall project timelines, budgets, and operational needs. All work must be performed under the authority of a Small Business set-aside designation, open exclusively to SBA-certified small businesses including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, Veteran-Owned Small Businesses, and Service-Disabled Veteran-Owned Small Businesses. The solicitation is classified under NAICS code 238990 for other specialty trade contractors and requires responses by August 21, 2026, with performance expected to support MTC’s operational objectives under the Maui relocation initiative.

All Other Specialty Trade Contractors

POSTED

about 17 hours ago

DEADLINE

Equipment Supply (Security Cameras and Components)The contract is for the supply of new or refurbished security cameras along with essential components such as mounts, enclosures, power supplies, and related hardware as detailed in the bid specifications. All equipment must meet the technical and performance standards outlined in the requirements, ensuring compatibility, durability, and reliability for security operations. The solicitation is designated as a subcontract under the Small Business Administration’s set-aside programs, making it available exclusively to Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business concerns. The North American Industry Classification System code 423690 identifies the scope as other electronic parts and equipment merchant wholesalers. The opportunity was posted on August 4, 2026, with a response deadline of August 21, 2026, and the performance location is not specified, though the contracting entity is Management & Training Corporation, operating under a rebid initiative tied to the 2026 Maui relocation project.

Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

about 17 hours ago

DEADLINE

General Labor and Site Support ServicesThe contract entails the provision of general labor and site support services for the demolition, debris removal, equipment handling, and site cleanup activities associated with the removal and installation of cameras. Work is required to be performed in support of a relocation effort, with all tasks centered around ensuring safe, efficient, and thorough site preparation and restoration during both phases of camera infrastructure changes. The nature of the work demands skilled labor capable of managing heavy machinery, handling hazardous materials, and adhering to strict safety and environmental protocols on site. This subcontract is set aside exclusively for small business concerns, including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, Veteran-Owned Small Businesses, and Service-Disabled Veteran-Owned Small Businesses, in accordance with SBA regulations. The North American Industry Classification System code 238990 applies, reflecting specialized construction services not elsewhere classified. The solicitation was posted on August 4, 2026, with responses due by August 21, 2026, and is administered by the Management & Training Corporation. All work must comply with the designated performance requirements, though specific location details are not provided in the available data.

All Other Specialty Trade Contractors

POSTED

about 17 hours ago

DEADLINE

Low-Voltage Cabling and Network Infrastructure UpgradeThe contract covers the installation or extension of low-voltage cabling including coaxial, fiber, and Cat6 wiring to support the relocation of security cameras, with full responsibility for conduit routing, termination, testing, and seamless integration with existing NVR or network infrastructure. The scope requires precise execution of all physical and technical components necessary to ensure reliable video transmission and system compatibility, adhering to industry standards for performance and durability. Work must be completed in alignment with current best practices for cabling deployment and network connectivity to guarantee system integrity and operational continuity. This is a subcontract under the SBA’s Small Business programs, designated for Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business entities. The NAICS code 517919 classifies it under Other Telecommunications, indicating its focus on specialized communication infrastructure. The solicitation was posted on August 4, 2026, with a response deadline of August 21, 2026, and is managed by Management & Training Corporation. While specific performance location details are not provided, the work is tied to a camera relocation initiative, likely at a facility operated by or under contract with the agency. All bidders must qualify under one of the listed SBA set-aside categories to be eligible for award.

All Other Telecommunications

POSTED

about 17 hours ago

DEADLINE

Security Camera Removal and Relocation InstallationThe contract involves the complete removal of eleven existing security cameras from Building 13 at the Hawaii Job Corps Center and their reinstallation at new designated locations within the same facility. This work includes all necessary electrical connections, wiring updates, and full system integration to ensure seamless operation with the existing security infrastructure. The project requires precise planning and execution to maintain surveillance coverage without disruption while relocating the equipment to optimized vantage points. This is a subcontract classified under NAICS code 238210 and set aside specifically for small business concerns, including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, Veteran-Owned Small Businesses, and Service-Disabled Veteran-Owned Small Businesses. The solicitation was posted on August 4, 2026, with a response deadline of August 21, 2026. The contracting entity is Management & Training Corporation, and the work must be performed at the Hawaii Job Corps Center, though specific location details are not provided. The goal is to enhance security effectiveness through strategic camera relocation and proper technical integration.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 17 hours ago

DEADLINE