This Solicitation opportunity from Government of Canada was posted on November 7, 2023. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Refuelling Tender Garage, 14 Wing Greenwood, NS

Closed

IE080419_80855International

Submission Closed12/12/2023, 01:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 236210

New

AMC-0171 LOU ATCT Public Announcement

Solicitation # amc-0171-lou-atct-public-announcement

The AMC-0171 LOU ATCT project involves a combination of electrical corrections and architectural repairs located in Kentucky. Electrical work focuses on grounding gates, installing surge protective devices, adding air terminals, and addressing parking lot light poles. Architectural requirements include reinforcing exterior siding, removing rust, applying protective paint, caulking, and replacing handrails. The estimated magnitude of construction for these services is between 250,000 and 500,000 dollars. Managed by PTSI Managed Services Inc. (Parsons), this solicitation is set aside for various small business categories, including Small Disadvantaged, Women-Owned, HUBZone, and Veteran-Owned Small Businesses. Interested parties must submit their responses by November 8, 2026. The project falls under NAICS code 236210 and is coordinated through the primary point of contact, Kurtis Kinard.

PTSI Managed Services Inc. (Parsons)

POSTED

DEADLINE

AMC-169 CVG ATCT Public Announcement

Solicitation # amc-169-cvg-atct-public-announcement

The AMC-169 CVG ATCT project is a comprehensive facility improvement solicitation managed by PTSI Managed Services Inc. (Parsons) located in Kentucky. With an estimated value between 1,000,000 and 5,000,000 dollars, the scope of work encompasses a wide range of multidisciplinary repairs. Key tasks include mechanical upgrades such as testing internal fan units and replacing disconnect switches and gates, as well as structural reinforcements to address water-damaged insulation. Architectural and civil improvements are also central to the project, featuring PVC roof replacement, roof hatch and drainage repairs, and the installation of new doors, railings, and tiles. Exterior work involves asphalt milling, sealing CMU wall joints, and updating parking lot signage and sidewalks. This opportunity is set aside for various small business categories, including SDB, WOSB, HUBZone, and VOSB, with a response deadline of November 2, 2026.

PTSI Managed Services Inc. (Parsons)

POSTED

DEADLINE

ASO-1230-00 VOR counterpoise and roof replacement in Marianna, FL

Solicitation # aso-1230-00-vor-counterpoise-roof-replacement-marianna-fl

This solicitation, managed by Parsons, involves the removal and replacement of the roof and the installation of a new counterpoise system at the VORTAC facility located in Marianna, Florida. The project falls under NAICS code 236210 and is open to various small business types, including SBA certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone Small Businesses. Interested parties must submit their responses by the deadline of January 28, 2027. The primary point of contact for this opportunity is Quentin Wack, who can be reached via email or phone for further inquiries regarding the scope of work and submission requirements.

POSTED

DEADLINE

AMC-0158 NEW RTR Public Announcement

Solicitation # amc-0158-new-rtr-public-announcement

This solicitation, managed by PTSI Managed Services Inc. (Parsons), involves a comprehensive set of facility repairs and upgrades in Louisiana. The scope of work encompasses electrical corrections to replace corroded disconnects, mechanical replacements for AHU and CU units, and civil repairs including grading and gravel addition. Additionally, the project requires structural reinforcement and concrete crack repair, alongside architectural improvements such as sandblasting, painting, and the replacement of plywood walls and gypsum ceiling panels. The estimated construction value for this project is between 500,000 and 1,000,000 dollars. This opportunity is set aside for small businesses, including SDB, WOSB, HUBZone, and VOSB certifications, under NAICS code 236210. Interested parties must respond by November 1, 2026.

PTSI Managed Services Inc. (Parsons)

POSTED

DEADLINE

AMC-0174 OWB ATCT Public Announcement

Solicitation # amc-0174-owb-atct-public-announcement

This solicitation, managed by PTSI Managed Services Inc. (Parsons), involves a comprehensive facility renovation project located in Kentucky with an estimated construction value between 500,000 and 1,000,000 dollars. The scope of work is multidisciplinary, encompassing electrical upgrades such as arc flash studies and SPD replacement, the installation of EPDM membranes on three roofs, and the replacement of various rooftop and condensing mechanical units. Architectural improvements include interior lighting and emergency light replacement, wall patching and painting, rust repair, and the installation of new handrails and door hardware. The opportunity is designated as a small business set-aside, welcoming bids from SDB, WOSB, HUBZone, and VOSB certified entities. Interested parties must submit their responses by the deadline of March 21, 2027. The project falls under NAICS code 236210 and is identified by solicitation number amc-0174-owb-atct-public-announcement.

PTSI Managed Services Inc. (Parsons)

POSTED

DEADLINE

Concrete Structure & ReinforcementThis subcontract for the California Department of Transportation involves the supply and installation of concrete structures and reinforcing steel for prime contractors on various infrastructure projects. The scope of work includes welding reinforcement, installing partially fabricated cages, and utilizing macro/micro synthetic fibers along with expanded polystyrene foam block-outs. The contractor is responsible for the delivery of all installed concrete structures and reinforcement cages. To ensure quality and regulatory adherence, the provider must submit mill certificates for all rebar and certificates of compliance for the cages. Responses for this opportunity are due by December 8, 2026.

California Department of Transportation

POSTED

DEADLINE

Facilities & Parks New Supply Warehouse Building

Solicitation # ITB FM 04-27

Okaloosa County, Florida, is soliciting bids under ITB FM 04-27 for the construction of a new 9,000 square foot metal supply warehouse for the Facilities and Parks Department located at 5489 Old Bethel Road in Crestview. The project aims to expand storage capacity and includes comprehensive site preparation, civil engineering for roadway or parking improvements, and the installation of mechanical, electrical, plumbing, and telecommunications systems. All work must comply with the 2023 8th Edition Florida Building Code, ADA standards, and OSHA regulations, with specific structural requirements to withstand ultimate wind speeds of 160 MPH. The contract will be awarded to the responsive and responsible vendor offering the lowest bid, provided they meet financial stability and registration requirements, including SAM.gov registration for grant-funded components. The selected contractor must provide a dedicated project manager and implement a quality control plan, with a total performance period of 12 months from the notice to proceed. Key compliance mandates include adherence to the Davis-Bacon Act for prevailing wages, Buy America certifications for materials, and strict anti-trafficking and non-discrimination policies. Bids must be submitted electronically via OpenGov by November 4, 2026, and must include a performance bond and comprehensive insurance coverage.

POSTED

DEADLINE

F-35 Composite Repair and Training Facility / F-35 Maintenance Facility, Hill Air Force Base, Utah

Solicitation # W9123827X

The U.S. Army Corps of Engineers, Sacramento District, is announcing an upcoming competition for the design and construction of an F-35 Composite Repair and Training Facility and an F-35 Maintenance Facility at Hill Air Force Base, Utah. The total program funding is estimated at 157,886,000 dollars for the repair and training facility and 213,716,000 dollars for the maintenance facility. The project involves the construction of specialized industrial spaces, including clean rooms, paint bays, and secure areas complying with Intelligence Community Directive 705 standards, all designed as permanent construction meeting Department of Defense Unified Facilities Criteria. The acquisition will be conducted under an Other Transaction framework using either a Progressive Design-Build or Construction Manager at Risk approach. The selection process will involve a two-step competitive sequence consisting of white paper submissions and pitch meetings to select a single entity for design and construction services. Interested parties must possess a Cybersecurity Maturity Model Certification Level 1 self-assessment. An informational virtual Industry Day is scheduled for November 17, 2026, with a registration deadline of November 12, 2026.

W075 Endist Sacramento

POSTED

DEADLINE

Tinker AFB 2026 Multiple Award Construction Contract (MACC)

Solicitation # FA8137-26-R-0040

Solicitation FA8137-26-R-0040 is a competitive Indefinite Delivery Indefinite Quantity (IDIQ) Multiple Award Construction Contract (MACC) for general construction services at Tinker Air Force Base, Oklahoma. The contract encompasses a broad range of sustainment, maintenance, repair, alteration, renovation, and minor construction projects. Work execution is categorized into three methods: Design-Build, Construction with Limited Design, and Construction Only. The MACC has a total aggregate maximum value of 950 million dollars, with a minimum guarantee of 500,000 dollars per awarded contract. The period of performance consists of a five-year base period starting March 26, 2027, with one five-year option period. The procurement is divided into a Small Business Pool, which is a 50 percent set-aside, and a Full and Open Pool. Awards are based on the Highest Technically Rated Offeror (HTRO) methodology, utilizing a Minimum Technical Threshold Rating (MTTR) based on validated self-scored matrices for technical experience, design experience, certifications, and staffing. There is no cost or price evaluation at the IDIQ level. Offerors must be registered in the System for Award Management and meet CMMC Level 1 certification requirements. Following several amendments, the final proposal response deadline was extended to November 16, 2026.

POSTED

DEADLINE

Modular Building FabricationThis subcontract involves the fabrication of prefabricated modular duplex units for prime contractors working on Parks Canada Agency projects located in Lutsël K’é, Northwest Territories. The selected provider is responsible for manufacturing the units according to approved designs, implementing a Factory Quality Management Plan, and performing essential factory air-tightness testing to ensure quality and performance. To facilitate delivery to the remote site, the contractor must reinforce the units to withstand the stresses of barge and air transport. The final deliverable consists of completed, factory-tested modular units that are fully prepared for shipment to the place of performance in Canada.

POSTED

DEADLINE

IFB 06-26 Biochar Facility Construction

Solicitation # IFB-06-26

The Southeastern Public Service Authority of Virginia (SPSA) is soliciting bids for the construction of a 40,872 square foot biochar processing plant located in Portsmouth, Virginia. The facility is designed to manage the organic portion of the SPSA SORT System. The successful contractor will be responsible for providing all labor, materials, and warranties to deliver a fully operational facility, which includes coordinating construction activities with SPSA and AMP regarding the installation and commissioning of specialized equipment. The contract will be awarded to the lowest responsive and responsible bidder, with evaluations based on technical compliance, the ability to meet quality standards, and the provision of descriptive literature and references for similar completed projects. Key requirements include the submission of performance and labor and material payment bonds totaling 50 percent of the contract amount and adherence to strict safety and accessibility standards, including the Americans With Disabilities Act. Bidders must provide one original and four copies of their bid, along with an electronic copy on a flash drive, by the deadline of November 20, 2026. The contractor is required to provide as-built drawings upon completion and must comply with various federal and state regulations, including drug-free workplace and non-discrimination provisions. All work must be performed in accordance with the CED Project Manual and associated drawings, with specific quality assurance testing for concrete and asphalt as outlined in the inspection criteria.

Southeastern Public Service Authority

POSTED

DEADLINE

IE181 - WHS Greenhouse Construction

Solicitation # 140A2327Q0297

Solicitation 140A2327Q0297 is a fixed-price contract set aside exclusively for Indian Small Business Economic Enterprises (ISBEE) to design and install an educational greenhouse facility at Wingate High School in Fort Wingate, New Mexico. The project, estimated between $100,000 and $250,000, involves a comprehensive scope of work including foundation installation, utility connections, greenhouse structure and glazing, ventilation, environmental controls, heating, and electrical systems. The work must be performed at a remote high-desert site at an elevation of approximately 6,900 feet on an occupied K-12 campus. The maximum allowable period of performance is 120 calendar days from the Notice to Proceed. Award will be made based on the Lowest Price Technically Acceptable (LPTA) method to a responsible offeror who meets all technical requirements, including the submission of a project-specific Quality Control Plan and a qualified project management team. Key requirements for offerors include registration in SAM.gov, current New Mexico contractor licensure for general building, electrical, and mechanical/gas work, and any necessary Navajo Nation tribal business licenses. Additionally, a bid bond is required for any quote exceeding $35,000. Proposals must be submitted to the Bureau of Indian Education by November 19, 2026, at 12:00 PM MDT, and must include a signed quote, UEI number, and the required Indian Economic Enterprise Representation.

Indian Education Acquisition Office

POSTED

8 days ago

DEADLINE

in 23 days

AI Contract Overview

Defence Construction Canada is seeking bids for Project IE080419_80855, which involves the construction of a Refuelling Tender Garage at 14 Wing Greenwood, Nova Scotia. The scope of work encompasses the provision of all necessary labour, materials, supervision, and equipment for civil work, excavation, the complete building structure, finishes, site work, and the installation of a steam distribution system connected to the existing facility. The estimated value of the project is 27,639,500.00 dollars. The successful contractor must hold a valid Designated Organization Screening at the Reliability level issued by the Contract Security Program. Project timelines require substantial completion within 810 calendar days of the contract award, with final completion due 90 days thereafter. This procurement follows the Canadian Free Trade Agreement and the World Trade Organization Agreement on Government Procurement. All official tender documents and amendments are managed through MERX, and bidders must be on the official list of document recipients to ensure bid validity.

General Info

Construction of Refuelling Tender Garage in Nova Scotia for 27,639,500.00 dollars.

Agency

Government of Canada → Defence Construction Canada - Atlantic Region

NAICS

236210 - Industrial Building Construction

Place of Performance

CAN

Set-Aside

NONE

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedNov 7

Solicitation

Response DeadlineDec 12

Deadline has passed

Submission Closed

12/12/2023, 01:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Defence Construction Canada - Atlantic Region

Contacts1 person available

OfficeN/A

Organization / AgencyGovernment of Canada → Defence Construction Canada - Atlantic Region

Office AddressN/A

Contacts

Donna MacDonaldPoint of Contact

contact@example.gov

+1 (555) 000-0000

Full Description

As per the terms and conditions of the Request for Expression of Interest (RFEOI), you are invited to submit a bid for the following project: DEFENCE CONSTRUCTION CANADA (DCC) – Project IE080419_80855 – Refuelling Tender Garage, 14 Wing Greenwood, NS The work includes, but is not necessarily limited to, the supply of labour, material, supervision and equipment necessary for the civil work, excavation, complete building structure, finishes, site work, and a steam distribution system which will connect to 14 Wing Greenwood’s existing system, 14 Wing Greenwood, NS The Plans and Specifications (P&S) for this opportunity may be ordered from MERX by logging on their website: MERX : Find New Contracts, Bids & Tenders for Canadian Businesses or by calling 1 (800) 964-MERX (6379). The P&S are also available for viewing at the local Construction Association. AMENDMENTS TO THE TENDER DOCUMENTS SHOULD BE OBTAINED FROM merx AS AMENDMENTS OBTAINED FROM OTHER SOURCES MAY NOT BE THE LATEST. Bids from bidders whose name does not appear on the official list of bidders who ordered the tender documents, may be declared invalid. A site visit will be held on the following date, time, and location. It is highly recommended that bidders attend this visit. Date: November 23, 2023 Time: 9:00am, local time Location: Pass Control, 179 Ad Astra Way, 14 Wing Greenwood, Nova Scotia The estimated cost for this opportunity is in the range of $ 27,639,500.00 The Work must reach Substantial Completion no later than 810 calendar days after notification of contract award and must be completed no later than 90 calendar days after the date of Substantial Completion. This procurement is being conducted in accordance with the requirements set out in Chapter Five of the Canadian Free Trade Agreement (CFTA) and the World Trade Organization Agreement on Government Procurement (GPA). The selected contractor will be required to hold a valid Designated Organization Screening (DOS) at the level of Reliability, issued by the Contract Security Program (CSP) within Public Services and Procurement Canada (PSPC). Details concerning the Security Requirements for this project are identified in the Tender Documents. Please note that the preliminary tender results for this project will be available on MERX. Inquiries relating to this solicitation are to be directed ONLY to the DCC Contracting Authority mentioned above. Bidders who contact anyone other than the DCC Contracting Authority to obtain clarifications during the solicitation period may, for that reason alone, be disqualified. The STANDARD CONSTRUCTION CONTRACT DOCUMENTS FOR ELECTRONIC BIDDING (DCL250E), including the Instructions to Tenderers for Electronic Bidding (Form DCL 193E), form part of the Tender Package by reference. A hard copy of these documents can be ordered from MERX or downloaded from the DCC website at Forms - Defence Construction Canada (dcc-cdc.gc.ca). Bidders can obtain contract award results from the DCC website at Contract Activity - Defence Construction Canada (dcc-cdc.gc.ca). DCC now publicly discloses information on payments made to prime contractors so that subcontractors know when they can expect payment. Information on payments made in the past 90 days on construction contracts over $100,000, as well as further information regarding DCC’s prompt payment commitment, can be obtained from the DCC website at Contract Activity - Defence Construction Canada (dcc-cdc.gc.ca)Bidding and Documents are available on http://www.merx.com. Fees may apply; See https://www.merx.com/public/pricing for more information.