Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

Relay Basler

Active
Z4850State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract solicits a Basler BE1-951-H1 digital protection relay, specifically the half-rack case configuration, which provides comprehensive multifunctional protection and monitoring capabilities for electrical systems. This relay delivers three-phase, ground, and negative sequence overcurrent protection with four-shot reclosing functionality, along with forward and reverse power protection, breaker failure detection, over and under frequency and voltage protection, and overexcitation protection. It also includes sync check, breaker monitoring and control, sequential event recording, detailed fault reporting, and metering functions to support operational integrity and diagnostic accuracy. The required unit must be the approved Basler model BE1-951-E3N1H3U or an equivalent approved alternative. The solicitation is issued by Nashville Electric Service under solicitation number Z4850, with a posted date of July 24, 2026, and a response deadline of July 29, 2026, at 7:00 PM. The procurement is categorized under a SLED organization type, with performance taking place in Nashville, Tennessee. Primary contact for inquiries is Tiffany Caruthers, Procurement Contact, reachable via email at tcaruthers@nespower.com or phone at 615-747-3593. Additional details and submission instructions are available through the vendor portal at the provided uiLink.

General Info

Basler BE1-951-H1 relay procurement by Nashville Electric Service, due July 29, 2026, for electrical protection in Nashville.

Agency

Tennessee → Nashville Electric ServiceView Agency

NAICS

335314 - Relay and Industrial Control ManufacturingView NAICS

Place of Performance

Nashville, TN, US

Set-Aside

NONE

Documents

(1)

Z4850_RFB.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyTennessee → Nashville Electric Service
Contacts1 person available
OfficeNashville, TN, US
Organization / Agency
Tennessee → Nashville Electric Service
View Agency Profile
Office AddressNashville, TN, US
Contacts
Tiffany CaruthersProcurement Contact
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
RELAY BASLER "BE1-951"H1(HALF RACK)CASE DIGITAL PROTECTION, MULTIFUNCTIONAL NUMERICAL RELAY THAT PROVIDES 3 PHASE, GROUND, AND NEGATIVE SEQUENCE OVERCURRENT PROTECTION WITH 4 SHOT RECLOSING, FORWARD OR REVERSE POWER PROTECTION, BREAKER FAILURE, OVER/UNDER FREQUENCY, OVER/UNDER VOLTAGE AND OVEREXCITATION PROTECTION, SYNC CHECK BREAKER MONITORING AND CONTROL, SEQUENTIAL EVENTS, FAULT REPORTING, AND METERING FUNCTIONS. WE ARE USING THE H1 (HALF RACK) CASE. Approved Manufacturers and/or Part Numbers: BASLERBE1-951-E3N1H3U OR EQUAL.

Similar Contracts

Same NAICS industry code

NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNETICThis contract specifies the procurement of an electromagnetic relay, socket mounted, identified by NSN 5945-01-264-2822 and part number 9224-10612, for use in Aircraft Launch and Recovery Equipment (ALRE) as a Critical Application Item. A total of 157 units are required with a firm fixed price and zero variance in quantity, to be delivered within 700 days after contract award. Serialization and lot numbering are mandatory for full traceability, covering all phases including manufacturing and scrap, with strict prohibitions against rebranding that obscures original OEM markings. All items must comply with MIL-STD-129 for marking, including unit packs labeled with NSN, contract number, lot number, contractor and manufacturer CAGE codes, and part number. Lead finish must be labeled per IPC/JEDEC J-STD-609, and packaging must adhere to MIL-STD-2073-1E with specified materials and methods. The item must meet NAVAIR ALRE traceability standards and technical data package requirements, including reference drawings and quality assurance plans. Only approved sources recognized by NAWC Lakehurst or NAVICP Philadelphia are eligible, requiring submission of a source approval letter or equivalent evidence. First Article Testing, Production Test and Inspection Reports, and Certificate of Quality Compliance are required unless waived. Ozone-depleting chemicals and intentionally added mercury are strictly prohibited except under specified exceptions, and all materials must comply with SAE AS9100 quality standards. The contract explicitly excludes the Certificate of Conformance and does not require Unique Item Identification. Deliveries must be shipped to DLA Distribution San Diego, with inspection and acceptance occurring at origin, and all documentation must reflect compliance with DLA quality and technical requirements as referenced in the DLA Master List.
NUCLEAR REACTOR PROGRAM

POSTED

about 7 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335314
New
Federal
59--RELAY,ELECTROMAGNETICThe contract solicitation seeks quotes for 160 electromagnetic relays, identified by NSN 5945012642822, with quantities distributed across four line items: 157 units to be delivered to DLA Distribution San Diego and one unit each to be delivered within 300 and 700 days after order, respectively. All offers must be submitted electronically and received by the deadline of July 31, 2026, to be considered, with no set-aside restrictions specified and the opportunity open to all responsible sources. The procurement is managed under solicitation number SPE7M226Q0671, classified under NAICS code 335314, and administered by the Department of Defense’s DLA Land and Maritime office located in Columbus, Ohio. The point of contact for inquiries is listed as DibbsBSM@dla.mil, with further details available via the SAM.gov portal using the provided solicitation number.
DLA Land And Maritime

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNETICThe contract is for the procurement of two electromagnetic relays with part number RA-3100L and NSN 5945-01-464-8886, under solicitation SPE7M5-26-T-351S, which is a total small business set-aside. Delivery is required within 168 days from the contract award, with shipment FOB origin and inspection and acceptance occurring at the destination. The item must comply with DLA packaging requirements per MIL-STD-2073-1E and MIL-STD-129 for marking, including special marking code ZZ for additional requirements, and must be palletized according to DLA standards. The relays must be free of intentional mercury or mercury compounds, except in limited exempted applications such as batteries, fluorescent lamps, sensors, or weapon systems approved by NAVSEA, with portable devices containing mercury requiring shockproof design and secondary containment as per NAVSEA 5100-003D. Each individual unit package must be marked in accordance with IPC/JEDEC J-STD-609 to identify lead content and other attributes, with placement strictly following the standard’s guidelines. The delivery address is DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581. The required ship date is January 19, 2027, with an original delivery deadline of November 18, 2026. All technical and quality requirements referenced by R or I numbers are incorporated from the DLA Master List and are binding.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 335314
New
DIBBS
SWITCH, FLOWThis contract specifies the procurement of a flow switch with NSN 5930-01-194-8584, under solicitation SPE7M8-26-T-5579, requiring delivery within 80 days FOB origin with no variance in quantity. The item is designated a critical application item and must comply with detailed technical documentation including TDP Rev A Gen 1 referencing drawing numbers 18876 and part number 11437885-108, with revision dates up to October 29, 2025. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with specific adherence to ANSI/ISO/ASQ 9001:2015 and AS9100 as tailored for operational processes. Ozone-depleting chemicals are strictly prohibited, and any substitute materials require prior approval. Packaging must conform to MIL-STD-129 and DLA-specific standards, with hazardous materials following FED-STD-313 and non-hazardous items meeting ASTM D3951, unless overridden by DLA requirements. Inspection and acceptance occur at origin, and the contractor must provide production lot testing in accordance with Procurement Note E04. A separate line item exists solely to fulfill the production lot test requirement. The contract mandates full and open competition, prohibits surplus supplies, and enforces configuration control through engineering change proposals and variance requests. The government point of contact is Dondiego Boler, and delivery is directed to the U.S. Army SSA facility in Zaczernie, Poland, with all packaging and marking subject to precise DLA specifications.
ELECTRICAL DEVICES DIV

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 335314
New
DIBBS
MOTOR, CONTROLThis contract is for the procurement of motor control units under solicitation SPE7M5-26-T-343B, issued by the Department of Defense’s Active Devices Division as a Total Small Business Set-Aside. The item, identified by NSN 6105-00-942-2297 and part numbers from multiple qualified suppliers, requires 50 units to be delivered FOB origin within 40 days of contract award, with strict no variance in quantity. Delivery must be made to DLA Distribution Depot Hill at Hill AFB, Utah, following all DLA packaging directives, which mandate compliance with ASTM D3951 and MIL-STD-129 for marking and labeling, and require palletization per RP001 standards. The DLA Master List of Technical and Quality Requirements overrides any conflicting specifications and governs all technical and quality criteria referenced by R or I numbers. Inspection and acceptance occur at the destination, and the unit of issue is each (EA) at a fixed price of $50 per unit, totaling $2,500. The contract includes specific transportation guidelines and mandates that all packaging and documentation meet exact DLA requirements, with a required ship date of September 13, 2026, and an original delivery deadline of January 9, 2027. The solicitation closed on August 3, 2026, with primary point of contact Corey Carter available for inquiries.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 335314
New
DIBBS
SWITCH, FLOWThis contract specifies the procurement of five flow switches identified by NSN 5930-01-570-4515 and part number 225527 from SETRA SYSTEMS, INC., with a total value of $25.00 at $5.00 per unit. Delivery is required within 168 days from contract award, delivered FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and all packaging must comply with MIL-STD-2073-1E, including specific packaging methods, materials, and unit containment codes. Marking must adhere to MIL-STD-129 with no special marking codes applied, and palletization must follow DLA’s packaging requirements. The item is subject to strict restrictions on mercury and mercury-containing compounds, barring intentional addition or direct contact unless explicitly exempted for functional components like batteries, lamps, or authorized instrumentation, with additional containment requirements for portable mercury devices per NAVSEA 5100-003D. Shipment must be addressed to the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation procedures are governed by DLAD Proc Notes C19 and C20. The original required delivery date was November 29, 2026, with a need ship date of January 19, 2027, under solicitation SPE7M8-26-T-5575, which was posted July 23, 2026, with a response deadline of August 3, 2026. The contract falls under NAICS code 335314 and is managed by the Department of Defense’s Electrical Devices Division, with Dondiego Boler as the primary point of contact.
ELECTRICAL DEVICES DIV

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNETThis contract specifies the procurement of an electromagnet relay under NSN 5945-01-220-4267, with a requirement for 42 units to be delivered within 168 days from the contract award, FOB origin. The item is designated as a critical application item and must conform to DLA packaging standards per MIL-STD-2073-1E, including specific preservation methods, container types, and labeling in compliance with MIL-STD-129. Each unit package must be marked according to IPC/JEDEC J-STD-609 to identify lead content and associated attributes, with placement strictly adhering to the standard’s guidelines. The contract incorporates technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, and configuration changes require formal engineering change proposals or variance requests. The delivery destination is DLA Distribution Cherry Point in North Carolina, and the shipment must be arranged under DLAD Procurement Notes C19 and C20. The original required delivery date is February 20, 2027, with a need-by date of January 19, 2027. The unit price is $42.00 per item, totaling $1,764.00, and the solicitation number is SPE7M5-26-T-343Y, issued by the Department of Defense’s Active Devices Division. Approved suppliers include Teledyne Defense Electronics, Hamilton Sundstrand Corporation, and TE Connectivity Corporation, each with specified part numbers.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNETICThis contract specifies the procurement of six electromagnetic relays with NSN 5945-01-500-8719 and part number 380-0327-001 from Honeywell International Inc., under solicitation SPE7M5-26-T-346Y, which is a total small business set-aside. Delivery is required FOB origin within 168 days, with no quantity variance permitted, and inspection and acceptance both occur at the destination. Packaging must comply with MIL-STD-2073-1E, using unit packaging code D3 with intermediate container DO, and marking must follow MIL-STD-129 with special code ZZ for additional requirements. The relays must be marked per IPC/JEDEC J-STD-609 to identify lead content, with placement governed by specified sections of the standard. The deliver-to address is DLA Distribution Cherry Point in North Carolina, and the origin inspection requirement has been changed to destination inspection. The contract references DLA's master list of technical and quality requirements, with revisions controlled by the solicitation issue or award date depending on acquisition size. The unit price is $6.00 per unit for a total contract value of $36.00. A required ship date is January 19, 2027, with an original delivery deadline of May 30, 2027, and transportation must adhere to DLAD Proc Notes C19 and C20.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNETICThis contract specifies the procurement of an electromagnetic relay identified by NSN 5945-01-029-8411 and part number M39016/14-002M, adhering to military specification MIL-PRF-39016J(1) Sup 1 and revision G dated December 9, 2023. The item is classified as a commercial item and a critical application item, requiring compliance with the Qualified Products List or Qualified Manufacturers List. Strict prohibitions ban the intentional addition of mercury or mercury-containing compounds in any hardware or supply, except for specific functional uses such as batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, and authorized chemical reagents; portable devices containing mercury must be shockproof and feature a secondary containment barrier per NAVSEA 5100-003D. The use of Class I ozone-depleting substances in any phase of design, manufacturing, or testing is strictly prohibited without explicit written approval from the contracting officer, though this restriction does not apply to commercial items as defined by FAR 11.001 or to part-numbered-only items. The contract mandates packaging in accordance with MIL-STD-2073-1E, with unit packaging requirements including specific lead finish labeling per IPC/JEDEC J-STD-609, which requires clear identification of lead, lead-free, or other material attributes on each individual unit pack. Marking must conform to MIL-STD-129, including the special marking code ZZ for additional requirements. Palletization follows DLA packaging guidelines. The order quantity is 11 units, with a delivery period of 168 days, FOB origin, inspection and acceptance occurring at the destination. The shipment must be delivered to Tinker AFB, Oklahoma, by January 19, 2027, with the original required delivery date set for March 15, 2027. The unit of issue is each, with a total price of $11.00 per unit. All technical and quality requirements referenced are governed by the DLA Master List, with revisions controlled by the solicitation issue date.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNETICThis contract specifies the procurement of an electromagnetic relay with NSN 5945-01-245-9664, quantity of eight units, under solicitation SPE7M5-26-T-323R, with a required delivery in 165 days. All supplies must comply with DLA packaging requirements per RP001 and technical quality standards referenced in the DLA Master List, which governs revisions based on solicitation or award dates. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs as specified. Mercury and mercury-containing compounds are strictly prohibited except for functional uses in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or NAVSEA-specified reagents, and portable mercury-containing devices must include shockproof construction and secondary containment per NAVSEA 5100-003D. Each unit pack must be marked per IPC/JEDEC J-STD-609 to indicate lead content, with placement guided by standard specifications, and all packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 with special marking code ZZ. The delivery is FOB origin, inspection and acceptance occur at destination, with no variance allowed in quantity. The shipment must be palletized per DLA requirements and sent to the DLA Distribution facility in New Cumberland, Pennsylvania, with the original required delivery date of April 18, 2027, and a need ship date of January 5, 2027.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 335314
New
DIBBS
SOLENOID, ELECTRICALThe contract pertains to the procurement of a single solenoid, electrical component identified by NSN 5945-25-161-9431, with a delivery requirement of 168 days after order. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size, and any amendments superseding prior versions. Packaging must comply with DLA standards, and the item must be physically marked according to RQ017 requirements. Since no data is available, the alternate offeror is obligated to submit a complete data package covering both the approved and alternate part. The solicitation number is SPE7M5-26-T-347X, issued on July 23, 2026, with responses due by August 3, 2026, under NAICS code 335314 for electrical equipment manufacturing. The acquisition is managed by the Department of Defense’s Active Devices Division, with performance occurring in New Cumberland, Pennsylvania, and primary contact information provided through Jeanette Heisey at the DLA office.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNETThe contract specifies the procurement of 12 electromagnetic relays with the NSN 5945-00-722-5578 and part number 7022AA, manufactured by Tyco Electronics/Agastat, under solicitation SPE7M5-26-T-342V. Delivery is required within 168 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with FOB origin terms and strict zero variance in quantity. The item is classified as a critical application item, and all supplies must comply with DLA packaging and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, including adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Mercury and mercury-containing compounds are strictly prohibited unless exempted for specific functional uses such as batteries or sensors, and any portable devices containing mercury must include shockproof design and a secondary containment boundary as per NAVSEA 5100-003D. Each unit must be marked with lead-free or lead content identification in accordance with IPC/JEDEC J-STD-609, with markings applied per the standard’s specifications. The contract mandates no intentional addition of mercury to the hardware and requires compliance with all government identification removal protocols for non-accepted supplies. The required delivery date is January 13, 2027, with a needed ship date of January 19, 2027, and the point of contact for inquiries is Jeanette Heisey of the Department of Defense’s Active Devices Division.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details

More opportunities from Tennessee → Nashville Electric Service

Same awarding agency

NAICS: 331491
New
SLED
Strandvise Guy 3/8 Long BailThe contract solicits the Strandvise Guy 3/8 Long Bail Automatic Deadend, a specialized assembly designed for use with 3/8 inch universal grade steel strand or guy wire, with a wire range of 0.325 to 0.392 inches. The assembly includes a Type-C bail, yoke, spring, jaws, tapered aluminum housing cartridge, and pilot cup, ensuring secure and reliable anchoring for utility applications. Only approved manufacturers and part numbers are acceptable, specifically MACLEAN5202-L, POWERLIPACD38U-L, HUBBELGDE-5202L, ALLIEDBAB520200L, and GRIDPOWAGDE38U-L, ensuring compatibility and performance standards are met. Solicitation number Z4853 was posted by Nashville Electric Service, a SLED agency operating under Tennessee, with bids due by August 3, 2026 at 7:00 PM. The place of performance is Nashville, Tennessee, and all deliveries must align with the agency’s operational needs. The primary point of contact for procurement inquiries is Tiffany Caruthers, reachable via email at tcaruthers@nespower.com. Interested parties must submit responses through the official vendor portal at the provided uiLink, adhering strictly to the specified timelines and technical requirements to remain eligible for award.
Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 423610
New
SLED
TerminalThe contract calls for the procurement of terminal lugs designed for #4/0 stranded copper conductors, featuring two holes with standard NEMA drilling pattern "D" dimension of 3 inches and an overall length of approximately five inches. These terminals, marketed under approved part numbers such as HOMACL4/0-N, TELEDYNEBBLU-4/OD, RICHARDSCL12-2N, BURNDY HY-LUG YA28-2N, and ASKINCELL4012/1.75XSH, must meet specified dimensional and material standards to ensure compatibility and reliability in electrical installations. The components are intended for use in utility-scale applications requiring robust, high-current connections. This solicitation, identified by the number Z4851 and posted by the Nashville Electric Service under the Tennessee state agency, is open for responses until July 29, 2026, with submissions due by 7:00 PM Eastern Time. The procurement is classified under a SLED (State, Local, and Educational) organization and is managed by Procurement Contact Tiffany Caruthers, reachable at 615-747-3593 or tcaruthers@nespower.com. All bids must be submitted through the vendor portal linked via the official solicitation URL, and the place of performance is specified as Nashville, Tennessee, with no set-aside provisions applied to this contract.
Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 335313
New
SLED
Surge ArresterThe contract calls for a station-class polymer-housed lightning arrester rated at 3 kilovolts, featuring a metal oxide varistor (MOV) technology designed for use on a grounded neutral 4160 volt line-to-line electrical system. The arrester must have a minimum maximum continuous operating voltage (MCOV) rating of 2.55 kilovolts and be constructed with a gray polymer housing to ensure durability and environmental resistance. It is specifically engineered for mounting on a three-bolt pattern arranged in a 10-inch circle, ensuring secure and standardized installation compatibility. Only approved manufacturers are permitted, including Siemens with part number 3EL1003-1PC21-4YH5, Cooper with UHAA003002A0845A11, ABB with AUTOQ003SA002A, and Hubbell with EVP0003003001. The solicitation, issued by Nashville Electric Service under reference number Z4855, is open for response until July 29, 2026, with proposals submitted through the vendor portal. Procurement inquiries are to be directed to Bailey Allen at the designated contact information, and the equipment is intended for performance within Nashville, Tennessee.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 424950
New
SLED
Brush, Paint 3 InchThe contract solicits 3-inch polyester paint brushes for use by Nashville Electric Service in Tennessee, with approved manufacturers and part numbers including WEILER40060, WOOSTER5378-3, P. P. G., BEST with NESTK numbers 4603260 and 2589, SHERWIN with NESTK number 4603260 and 441, and GRAY-SEA with NES number 4603260 and 979HOOSER. The solicitation is issued under number Z4854 and was posted on July 24, 2026, with a response deadline of July 28, 2026, at 7:00 PM. This procurement falls under the SLED classification, indicating it is targeted toward state, local, or educational entities, and the place of performance is specifically in Nashville, Tennessee. The point of contact for inquiries is Bailey Allen, Procurement Contact, reachable via email at ballen1@nespower.com or by phone at 615-747-3724, and additional information can be accessed through the vendor portal at the provided UI link.
Paint, Varnish, and Supplies Merchant Wholesalers

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
SLED
Pole Band Fastening EquipmentThe contract outlines the procurement of pole band fastening equipment consisting of .75 inch fixed and sliding retainer extrusions compatible with .75 inch stainless steel bands. The aluminum extrusions must be manufactured from 6061-T6 aluminum or meet or exceed a minimum tensile strength of 38,000 PSI and a minimum yield strength of 35,000 PSI. Each assembly must include carriage bolts sized either 3/8 inch by 6 inches or 5/8 inch by 7-1/2 inches, paired with Grade 5 nuts conforming to ASTM A449 standards. All hardware must be hot dipped galvanized in accordance with ASTM A153 and include both a flat washer and a lock washer for each bolt. Approved manufacturers and part numbers are specified as HUBBEL CBAB38 and ALUMA-FOBAB-38. This solicitation, identified as Z4849, is issued by Nashville Electric Service under the Tennessee state agency and is categorized as a SLED procurement. The solicitation was posted on July 24, 2026, with a firm response deadline of July 30, 2026, at 7:00 PM. The work is to be performed in Nashville, Tennessee, and all proposals must be submitted through the vendor portal at the provided UI link. Tiffany Caruthers serves as the primary procurement contact, reachable via phone at 615-747-3593 or email at tcaruthers@nespower.com for inquiries related to the bid.
Hardware Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423610
New
SLED
Wildlife Protection Cover Oil SwitchThe contract pertains to the procurement of wildlife protection covers specifically designed for oil switches, intended to safeguard against intrusion by squirrels and birds. The only approved manufacturer and part number for this item is UTILCOR7033, ensuring standardization and compatibility with existing infrastructure. The solicitation, identified by number Z4852, was posted on July 24, 2026, with a firm response deadline of July 29, 2026, at 7:00 PM. It is issued by Nashville Electric Service, a state, local, and educational government entity based in Tennessee, with the place of performance centered in Nashville. The procurement is managed through the organization’s vendor portal, accessible via the provided web link. Primary point of contact for all inquiries is Tiffany Caruthers, Procurement Contact, reachable by phone at 615-747-3593 or email at tcaruthers@nespower.com.
Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 484220
New
SLED
Flatbed Trucking and Delivery of Oversized Steel ComponentsThe contract requires the transportation of 120 fabricated steel crossarms from the manufacturer’s location to Nashville, Tennessee, using open flatbed trucks equipped for oversized load securement. All shipments must comply with federal and state regulations for transporting heavy and oversized freight, ensuring the structural integrity of the components during transit through proper tying, blocking, and bracing techniques. The work is classified under NAICS code 484220 and is structured as a subcontract, with the Nashville Electric Service as the contracting entity under its Tennessee operations. Bidders must submit proposals by the deadline of July 28, 2026, at 7:00 PM Eastern Time, following the solicitation process outlined on the vendor portal linked in the contract details. Delivery performance, safety certifications, and adherence to load securement standards are critical to compliance and successful award.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 332312
New
SLED
Fabrication and Supply of Weathered Steel CrossarmsThe contract calls for the fabrication and delivery of 120 weathered steel crossarms designed for electrical utility dead-end applications, adhering strictly to NES Specification 33-506R4 and Drawing LSK-1116-L. These crossarms must be manufactured to meet exacting technical standards to ensure durability, structural integrity, and compatibility with existing utility infrastructure. The work is scheduled under a subcontract type, with responses due by July 28, 2026, and the solicitation was posted on July 22, 2026. The North American Industry Classification System code 332312 indicates this falls under the fabricated metal product manufacturing sector, specifically for structural metal fabrication. Performance of the contract is required in Nashville, Tennessee, where Nashville Electric Service, the awarding organization, operates. All delivered units must align with the specified design and material requirements to qualify for acceptance and payment.
Fabricated Structural Metal Manufacturing

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 335313
New
SLED
Supply of Polymer Distribution Elbow Surge Arresters (12kV, 13.8kV System)Nashville Electric Service is seeking suppliers to provide 300 units of polymer distribution elbow surge arresters rated for 12kV systems with full compatibility for 13.8kV networks, intended for installation on dead-front pad-mounted transformers. The contract is structured as a subcontract with a response deadline of August 4, 2026, at 7:00 PM, and the solicitation was posted on July 22, 2026. The equipment must meet technical specifications ensuring reliable surge protection in utility distribution networks, and delivery is expected to be performed at the Nashville, Tennessee location. The procurement falls under NAICS code 335313, which designates the manufacturing of other electrical equipment and components. Interested parties must submit proposals through the vendor portal at the provided URL by the stated deadline.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

3 days ago

DEADLINE

in 11 days
View Details
NAICS: 335931
New
SLED
Supply of Parallel Groove Connectors for Electrical Systems
Current-Carrying Wiring Device Manufacturing

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 484220
New
SLED
Logistics and Delivery Services for Electrical Hardware
Specialized Freight (except Used Goods) Trucking, Local

POSTED

3 days ago

DEADLINE

in 10 days
View Details
NAICS: 335931
New
SLED
Supply of Hot Line Clamp Connectors (Electrical Tapping Hardware)
Current-Carrying Wiring Device Manufacturing

POSTED

3 days ago

DEADLINE

in 10 days
View Details