This Solicitation opportunity from Department Of Defense was posted on May 29, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
RELAY, ELECTROMAGNET
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
The contract is for the procurement of four units of a relay, electromagnet, identified by NSN 5945014785203 and part number M83536/11-005L, to be delivered FOB destination within 20 days after date of order. The item is designated as a critical application item and must comply with both the base specification MIL-PRF-83536/11E(2) Revision 2 dated November 19, 2024, and the referenced specification MIL-PRF-83536H(1) Supplement 1, Revision 1 dated March 28, 2025. Technical and quality requirements referenced by R or I numbers are incorporated from the DLA Master List of Technical and Quality Requirements, and the contract includes specific qualification requirements for components listed on Qualified Products Lists or Qualified Manufacturers Lists. Packaging must conform to MIL-STD-2073-1E with specific codes for unit packaging, preservation method, wrapping, and container types, and all marking must adhere to MIL-STD-129, including a special marking code ZZ for unique requirements. A mandatory lead finish marking requirement based on IPC/JEDEC J-STD-609 must be applied to each unit pack to identify lead content or Pb-free status, with placement and application strictly following the standard’s guidelines. The delivery destination is USS GEORGE WASHINGTON CVN 73, FPO AP 96607, with shipment governed by DLAD Proc Note C19 and C20, and the contract includes provisions for safeguarding covered defense information with compliance to FAR 252.204-7012 and other cybersecurity clauses. The contractor is required to remove government identification from non-accepted supplies, comply with hazardous material labeling under 29 CFR 1910.1200, and adhere to the Berry Amendment and Buy American Act provisions. Invoicing and receiving reports must be processed through Wide Area Workflow, and the contractor must maintain current representations and certifications in SAM including small business status, employment eligibility, anti-trafficking compliance, and sustainable product requirements. The solicitation was issued under DLA’s Automated Simplified Acquisitions Master Solicitation, Revision 104, and is a set-aside for small business with a response deadline of May 29, 2026
General Info
Agency
NAICS
Place of Performance
UNIT 100148 BOX 1, FPO, AP, 96607, USASet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
RELAY,ELECTROMAGNET
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS
LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A
SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR
QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN
PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED
MANUFACTURERS LIST (QML)" APPLY.
CRITICAL APPLICATION ITEM
IAW BASIC SPEC NR MIL-PRF-83536/11E(2)
REVISION NR 2 DTD 11/19/2024
PART PIECE NUMBER: M83536/11-005L
IAW REFERENCE SPEC NR MIL-PRF-83536H(1) SUP 1
REVISION NR 1 DTD 03/28/2025
PART PIECE NUMBER: M83536/11-005L
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7013254750 0001 EA 4.000
NSN/MATERIAL:5945014785203
DELIVERY (IN DAYS):0020
SPE7M1-26-T-076R
SECTION B
PR: 7013254750 PRLI: 0001 CONT’D
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:EA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:M
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
PARCEL POST ADDRESS:
R21412
USS GEORGE WASHINGTON CVN 73
UNIT 100148 BOX 1
FPO AP 96607
US
VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
SPE7M1-26-T-076R
SECTION B
PR: 7013254750 PRLI: 0001 CONT’D
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
R21412
USS GEORGE WASHINGTON CVN 73
DLA VENDORS: USE VSM FOR
US
RDD 777 SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
M/F: (TCN) R2141251974B45
RDD: 777
PROJ: EK5 TP 2
SUPP ADD: SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A41 DIST: 9B ADV: FC: LR
Need Ship Date:00/00/0000 Original Required Delivery Date:08/05/2025
SPE7M1-26-T-076R NSN/Part Number: 5945-01-478-5203 Quantity: 4 EA Purchase Request: 7013254750QTY: 4 Delivery: 20 days ADO
More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN
Same awarding agency
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 650+ contractors already using CLEATUS