Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

RELAY, THERMAL

Active
SPE7M5-26-T-410ZFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of thermal relays, specifically Rockwell Automation part number 193-BSB30 (NSN 5945013361847). The agreement consists of five separate line items, each for a quantity of one unit, to be delivered to various naval vessels including the USS Pinckney, USS Kidd, USS Nitze, USS Sampson, and USS Forrest Sherman. The required delivery date for these items is August 11, 2026, with a delivery window of 20 days. The items are classified as commercial off-the-shelf hardware and must adhere to strict environmental and technical standards. Specifically, the contractor must ensure that mercury is not intentionally added to the supplies, except where functionally required. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with additional specific requirements for component lead finish markings according to IPC/JEDEC J-STD-609. Delivery is FOB Destination, and shipments to certain vessels must be made via the fastest traceable means, explicitly prohibiting the use of parcel post.

General Info

Procurement of five Rockwell thermal relays for five naval vessels by August 11, 2026.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

335314 - Relay and Industrial Control ManufacturingView NAICS

Place of Performance

UNIT 100201 BOX 1, FPO, AP, 96675, USA

Set-Aside

NONE

Documents

(1)

SPE7M5-26-T-410Z.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ACTIVE DEVICES DIVISION
View Agency Profile
Office AddressUSA
Contacts
Jeanette Heisey
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
RELAY,THERMAL
RELAY,THERMAL
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THIS IS A COMMERCIAL OFF-THE-SHELF ITEM.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
ROCKWELL AUTOMATION, INC. 01121 P/N 193-BSB30
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017858643 0001 EA 1.000
NSN/MATERIAL:5945013361847
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
SPE7M5-26-T-410Z
SECTION B
PR: 7017858643 PRLI: 0001 CONT’D
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
PARCEL POST ADDRESS:
N23145
USS PINCKNEY DDG 91
UNIT 100201 BOX 1
FPO AP 96675
US
RDD 777 SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
N23145
USS PINCKNEY DDG 91
SPE7M5-26-T-410Z
SECTION B
PR: 7017858643 PRLI: 0001 CONT’D
DLA VENDORS: USE VSM FOR
US
M/F: (TCN) N2314562091197
RDD: 777
PROJ: ZH9 TP 2
SUPP ADD: N48096 SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A41 DIST: V9B ADV: 2A FC: VO
Need Ship Date:00/00/0000 Original Required Delivery Date:08/11/2026

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 7017858672 0001 EA 1.000
NSN/MATERIAL:5945013361847
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association
SPE7M5-26-T-410Z
SECTION B
PR: 7017858672 PRLI: 0001 CONT’D
Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C UNIT CONT:ZZ OPI:M INTRMDTE CONT:ZZ INTRMDTE CONT QTY:AAA PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
PARCEL POST ADDRESS:
SPE7M5-26-T-410Z
SECTION B
PR: 7017858672 PRLI: 0001 CONT’D
N23152
USS KIDD DDG 100
UNIT 100209 BOX 1
FPO AP 96670
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N23152
USS KIDD DDG 100
DLA VENDORS: USE VSM FOR
US
M/F: (TCN) N2315262090013
RDD: 777
PROJ: ZH9 TP 2
SUPP ADD: N48096 SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A4A DIST: V9B ADV: 2A FC: VO
Need Ship Date:00/00/0000 Original Required Delivery Date:08/11/2026

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0003 7017858655 0001 EA 1.000
NSN/MATERIAL:5945013361847
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:AAA
PACK CODE:U
SPE7M5-26-T-410Z
SECTION B
PR: 7017858655 PRLI: 0001 CONT’D
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C UNIT CONT:ZZ OPI:M INTRMDTE CONT:ZZ INTRMDTE CONT QTY:AAA PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the
SPE7M5-26-T-410Z
SECTION B
PR: 7017858655 PRLI: 0001 CONT’D
Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C UNIT CONT:ZZ OPI:M INTRMDTE CONT:ZZ INTRMDTE CONT QTY:AAA PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
PARCEL POST ADDRESS:
N23147
USS NITZE DDG 94
UNIT 100514 BOX 1
FPO AE 09579
US
SPE7M5-26-T-410Z
SECTION B
PR: 7017858655 PRLI: 0001 CONT’D
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N23147
USS NITZE DDG 94
DLA VENDORS: USE VSM FOR
US
M/F: (TCN) N2314762121156
RDD: 777
PROJ: ZH9 TP 2
SUPP ADD: N48096 SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A4A DIST: V9B ADV: 2A FC: VO
Need Ship Date:00/00/0000 Original Required Delivery Date:08/11/2026

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0004 7017858683 0001 EA 1.000
NSN/MATERIAL:5945013361847
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the
SPE7M5-26-T-410Z
SECTION B
PR: 7017858683 PRLI: 0001 CONT’D
Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C UNIT CONT:ZZ OPI:M INTRMDTE CONT:ZZ INTRMDTE CONT QTY:AAA PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
SPE7M5-26-T-410Z
SECTION B
PR: 7017858683 PRLI: 0001 CONT’D
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C UNIT CONT:ZZ OPI:M INTRMDTE CONT:ZZ INTRMDTE CONT QTY:AAA PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify
SPE7M5-26-T-410Z
SECTION B
PR: 7017858683 PRLI: 0001 CONT’D
Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
PARCEL POST ADDRESS:
N23161
USS SAMPSON DDG 102
UNIT 100214 BOX 1
FPO AP 96678
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N23161
USS SAMPSON DDG 102
DLA VENDORS: USE VSM FOR
US
M/F: (TCN) N2316162121164
RDD: 777
PROJ: ZH9 TP 2
SUPP ADD: N48096 SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A4A DIST: V9B ADV: 2A FC: VO
Need Ship Date:00/00/0000 Original Required Delivery Date:08/11/2026
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
SPE7M5-26-T-410Z
SECTION B
PR: 7017858665 PRLI: 0001 CONT’D
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0005 7017858665 0001 EA 1.000
NSN/MATERIAL:5945013361847
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
SPE7M5-26-T-410Z
SECTION B
PR: 7017858665 PRLI: 0001 CONT’D
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C UNIT CONT:ZZ OPI:M INTRMDTE CONT:ZZ INTRMDTE CONT QTY:AAA PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid
SPE7M5-26-T-410Z
SECTION B
PR: 7017858665 PRLI: 0001 CONT’D
State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C UNIT CONT:ZZ OPI:M INTRMDTE CONT:ZZ INTRMDTE CONT QTY:AAA PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C UNIT CONT:ZZ OPI:M
SPE7M5-26-T-410Z
SECTION B
PR: 7017858665 PRLI: 0001 CONT’D
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
PARCEL POST ADDRESS:
N23149
USS FORREST SHERMAN DDG 98
UNIT 100327 BOX 1
FPO AE 09569
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N23149
USS FORREST SHERMAN DDG 98
DLA VENDORS: USE VSM FOR
US
M/F: (TCN) N2314962120586
RDD: 777
PROJ: ZH9 TP 2
SUPP ADD: N48096 SIG: C
SPE7M5-26-T-410Z
SECTION B
PR: 7017858665 PRLI: 0001 CONT’D
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A4A DIST: V9B ADV: 2A FC: VO
Need Ship Date:00/00/0000 Original Required Delivery Date:08/11/2026

SPE7M5-26-T-410Z NSN/Part Number: 5945-01-336-1847 Quantity: 1 EA Purchase Request: 7017858655QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNET
Solicitation # SPE7M5-26-T-410V
This contract is for the procurement of two electromagnetic relays, identified by NSN 5945016676044 and associated with ITW Food Equipment Group LLC part numbers 00-976005 and PL-60189. The order is managed under solicitation SPE7M5-26-T-410V with a required delivery date of August 11, 2026, and a delivery timeframe of 20 days. The items are to be delivered FOB Origin and are destined for the USS Ralph Johnson DDG 114. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards such as MIL-STD-129 and MIL-STD-2073-1E. Additionally, the contractor must comply with IPC/JEDEC J-STD-609 for the marking and labeling of component lead finishes. Inspection and acceptance will take place at the destination, and the contract specifies a zero percent quantity variance.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335314
New
DIBBS
STUD, PLAIN
Solicitation # SPE4A6-26-T-16MH
This solicitation, issued by the Department of Defense ASC Commodities Division, is for the procurement of 10 plain studs under NSN 5307-01-187-8903. The contract requires a rapid delivery turnaround of five days after the order is placed. Interested parties must respond to solicitation SPE4A6-26-T-16MH by August 21, 2026. The agreement is subject to several strict technical and security mandates, including DLA packaging requirements and the protection of covered defense information. Contractors must adhere to the DLA Master List of Technical and Quality Requirements and complete a Cybersecurity Maturity Model Certification Level 2 self-assessment. Additionally, the contract specifies the removal of government identification from any supplies that are not accepted.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335314
New
Federal
61--NOTICE OF INTENT TO SOLE SOURCE
Solicitation # 140R6026Q0132
The Bureau of Reclamation's Nebraska-Kansa Area Office, under the Department of the Interior's Great Plains Regional Office, intends to award a sole source purchase order to Border States. This procurement is for Rockwell Automation ControlLogix components required for the NKAO SCADA AB Upgrade. The solicitation, identified by number 140R6026Q0132, was posted on August 13, 2026, with a response deadline of August 27, 2026. The contract falls under NAICS code 335311 and is managed by David Bryan out of the office located in Billings, Montana.
Great Plains Regional Office

POSTED

about 8 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335314
New
DIBBS
Electromagnetic Relay Supply and Delivery
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 335314
New
DIBBS
Electronic Relay Subassembly Manufacturing
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 335314
New
DIBBS
Electromagnetic Relay Supply (NSN: 5945002385147)This subcontract opportunity with the Department of Defense Maritime Supply Chain involves the procurement of an estimated 679 electromagnetic armature relays under NSN 5945002385147. The scope of work includes the supply, packaging, labeling, and delivery of these units in strict accordance with established military and federal standards. The requirement is designated as a Service-Disabled Veteran-Owned Small Business set-aside under NAICS code 335314. Interested parties must submit their responses by the deadline of August 27, 2026, following the posting date of August 12, 2026.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 335314
New
DIBBS
Electromagnetic Relay SupplyThis subcontract opportunity with the Department of Defense Maritime Supply Chain involves the supply of an estimated 24 electromagnetic relays, identified by NSN 5945013614286. The required components must adhere to both military and commercial specifications under an indefinite-quantity contract structure. The procurement is designated as a Total Small Business Set-Aside under NAICS code 335314. Interested parties must submit their responses by August 27, 2026, following the posting date of August 12, 2026.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 335314
New
DIBBS
Electromagnetic Relay Supply (NSN 5945-01-226-3534)This subcontract, issued by the Department of Defense under the Maritime Supply Chain ESOC Buys agency, requires the supply of two electromagnetic relays identified by NSN 5945-01-226-3534. The items must be delivered according to specific military specifications and adhere strictly to DLA standards for packaging, labeling, and documentation. The procurement is structured with two separate Contract Line Item Numbers to account for each unit. The opportunity was posted on August 12, 2026, with a response deadline of August 18, 2026. It falls under NAICS code 335314, which pertains to the manufacture of electrical equipment. Interested parties can find further details and submission guidelines through the DIBBS portal.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 335314
New
DIBBS
Supply of Electromagnetic Relays (COTS)
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 335314
New
DIBBS
Electromagnetic Relay Supply (Restricted Source Item)
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNET
Solicitation # SPE7M5-26-T-408M
This solicitation from the Department of Defense Active Devices Division is for the procurement of 22 electromagnetic relays under NSN 5945-01-440-3140. The contract requires adherence to DLA packaging requirements and specific technical and quality standards as outlined in the DLA Master List. Delivery is expected within 203 days after the order is placed, with performance located in New Cumberland, Pennsylvania. Suppliers must comply with strict environmental regulations regarding mercury, prohibiting its intentional addition to hardware except for specific functional exceptions such as batteries or sensors. Additionally, the contract mandates the removal of government identification from any non-accepted supplies. Offerors providing alternate parts must submit a complete data package for both the approved and alternate components to be considered.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNET
Solicitation # SPE7M5-26-T-409X
This contract is a solicitation for the procurement of six electromagnetic relays, identified by NSN 5945-01-681-3521 and part number 1CH/14998 from SAAB, Inc. The acquisition is a total small business set-aside issued by the Department of Defense Active Devices Division. Delivery is required within 184 days, with a final need date of February 25, 2027, shipped FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards such as MIL-STD-2073-1E and MIL-STD-129. Additionally, the contractor must comply with IPC/JEDEC J-STD-609 for component lead finish marking and is prohibited from using Class I ozone-depleting chemicals in the delivered items. Inspection and acceptance will take place at the destination.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

NAICS: 335313
New
DIBBS
CIRCUIT BREAKER BOX
Solicitation # SPE7M5-26-T-410R
This contract is a solicitation from the Department of Defense Active Devices Division for the procurement of one Frymaster/Dean circuit breaker box, identified by part number 920-0156 and NSN 5925-01-456-0577. The delivery is required within 20 days after receipt of order, with a final destination of the USNS Marie Tharp (T-AGS 66). The agreement mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129. It includes a prohibition on the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions. Inspection and acceptance will take place at the destination, and the contract follows the technical and quality requirements set forth in the DLA Master List.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR NETWORK, FI
Solicitation # SPE7M5-26-T-410Q
This contract is a solicitation issued by the Department of Defense Active Devices Division for the procurement of one resistor network, identified by NSN 5905-01-436-1354 and part number 885353 from North Atlantic Industries, Inc. The agreement specifies a delivery timeline of 10 days after order, with shipping handled FOB Origin and inspection and acceptance occurring at the destination in Fort Wainwright, Alaska. The contractor must adhere to strict technical and quality requirements, including DLA packaging standards, MIL-STD-129 marking, and MIL-DTL-39032 preservation specifications. Specific mandates include the application of IPC/JEDEC J-STD-609 markings to identify lead finish attributes on individual unit packs. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions defined by NAVSEA.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334419
New
DIBBS
FILTER ELEMENT SET,
Solicitation # SPE7M5-26-T-411D
This contract, identified as SPE7M5-26-T-411D, is a solicitation by the Department of Defense for the procurement of two filter element sets. The items are identified by NSN 5999017276784 and part number SYS-04 from Omega Engineering, Inc. The delivery is set for FOB Origin with a required delivery date of November 10, 2026, and a need ship date of February 2, 2027. The agreement mandates strict adherence to DLA technical and quality requirements, specifically regarding packaging, palletization, and marking standards such as MIL-STD-129 and MIL-STD-2073-1E. Inspection and acceptance will occur at the destination, with the final shipment directed to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania.
Other Electronic Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335931
New
DIBBS
FUSE, CARTRIDGE
Solicitation # SPE7M5-26-T-411A
Contract SPE7M5-26-T-411A is a solicitation for the procurement of cartridge fuses, specifically NSN 5920016211927, with a part number from Walz and Krenzer Inc. The contract consists of three separate line items, each requiring one unit to be delivered to different destinations: the USS Marinette (LCS 25), the USS Cooperstown (LCS 23), and the USS St Louis (LCS 19). Delivery is required within 20 days, with an original required delivery date of August 11, 2026. The agreement mandates strict adherence to DLA packaging requirements, including MIL-STD-129 for labeling and ASTM D3951 for non-hazardous commercial packaging. Environmental restrictions prohibit the use of Class I ozone-depleting chemicals and the intentional addition of mercury, except in specific authorized functional applications. Additionally, the contractor must comply with CMMC Level 2 self-assessment standards and ensure all shipments are sent via the fastest traceable means, explicitly prohibiting the use of parcel post.
Current-Carrying Wiring Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334417
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE7M5-26-T-411B
This contract is for the procurement of electrical connector shields and backshells, identified as critical application items. The primary requirement consists of 116 units under NSN 5935004955698, with a delivery timeframe of 343 days. The agreement specifies that the items must be produced according to various technical data packages and reference drawings, including specific requirements for configuration change management and the prohibition of class I ozone depleting chemicals. The contract mandates government source inspection and a first article test requirement, which is represented by a separate line item. Quality assurance will be managed through sampling methods aligned with MIL-STD-1916 or ASQ H1331. Packaging must adhere to DLA requirements and MIL-STD-129, with delivery designated as FOB Origin to the DLA Distribution Depot at Hill AFB, Utah.
Electronic Connector Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335931
New
DIBBS
FUSE, CARTRIDGE
Solicitation # SPE7M5-26-T-411P
This contract is for the procurement of 15 cartridge fuses, identified as commercial off the shelf items with part number 0FLQ002.T from Littelfuse, Inc. and NSN 5920017354709. The order is designated as a critical application item and must adhere to strict mercury-free requirements, prohibiting the intentional addition of mercury or mercury compounds unless specifically exempted for functional use. Delivery is required within 20 days and is set as FOB Destination for the USNS Earl Warren T-AO 207. The contract mandates compliance with several DLA technical and quality requirements, including specific packaging standards under RP001 and MIL-STD-129, and source approval documentation via RC001. Inspection and acceptance will take place at the destination.
Current-Carrying Wiring Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334413
New
DIBBS
TRANSFORMER, POWER
Solicitation # SPE7M5-26-T-411L
This solicitation, issued by the Department of Defense Active Devices Division under solicitation number SPE7M5-26-T-411L, is for the procurement of 19 power transformers, identified by NSN 5950-00-686-1685. The contract requires delivery within 28 days after receipt of order, with the place of performance located in San Diego, California. Because this is a restricted source item, it requires engineering source approval from the government design control activity. Alternate offerors must provide extensive documentation per MIL-T-31000, including all manufacturing drawings, process operation sheets, and identification of critical process sources. Additionally, a shock extension report according to MIL-S-901 is required. If original equipment manufacturer drawings are unavailable, the offeror must submit a detailed engineering analysis report or a comprehensive reverse engineering procedure for review by the engineering support activity. Compliance with DLA packaging requirements and specific configuration change management protocols is also mandatory.
Semiconductor and Related Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECTRI
Solicitation # SPE7M5-26-Q-0875
This solicitation, issued by the Department of Defense Active Devices Division, is for the procurement of 74 electrical plug connectors under NSN 5935-00-574-3775. The contract is designated as a total small business set-aside with a delivery requirement of 306 days after order. Performance will take place in Jacksonville, Florida, and the response deadline for solicitation SPE7M5-26-Q-0875 is August 28, 2026. Strict compliance is required regarding DLA packaging standards and export control regulations. Because the technical data is subject to ITAR or EAR restrictions, it cannot be exported or disclosed to foreign nationals without prior authorization from the Department of State or Commerce. Access to this data is limited to contractors with an approved US/Canada Joint Certification Program certification who have completed the necessary DOD export-controlled technical data training and questionnaires.
Electronic Connector Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, FIXED, FILM
Solicitation # SPE7M5-26-T-410P
This contract is for the procurement of 150 fixed film resistors, part number RNC55K9881DS, under NSN 5905010757039. The items must adhere to the basic specification MIL-PRF-55182/1R and be delivered FOB Origin within 20 days. The contract specifies a zero percent quantity variance and designates both inspection and acceptance at the destination, with delivery to Fort Hood, Texas. Strict environmental and technical requirements are mandated, including a prohibition on Class I ozone-depleting substances and the intentional addition of mercury. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with specific requirements for lead finish marking per IPC/JEDEC J-STD-609. Additionally, the components require specialized electrostatic discharge and electromagnetic interference protection using qualified materials in accordance with MIL-PRF-81705 to prevent damage to leads and terminals.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334419
New
DIBBS
NRP, BOARD, PC, SYSTEM
Solicitation # SPE7M5-26-T-411G
This solicitation, issued by the Department of Defense Active Devices Division under solicitation number SPE7M5-26-T-411G, is for the procurement of three units of a system PC board identified by NSN 5999-01-620-0469. The contract requires adherence to specific DLA packaging and quality standards, including the protection of covered defense information and strict guidelines regarding the removal of government identification from non-accepted supplies and physical item marking. The delivery timeline is set for 202 days after the order is placed. Because no current data is available for the item, any alternate offeror must provide a comprehensive data package for both the approved and alternate parts. The response deadline for this federal requirement is August 24, 2026, with the place of performance located in Tracy, California.
Other Electronic Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334413
New
DIBBS
LIGHT EMITTING DIODE
Solicitation # SPE7M5-26-T-410S
This contract is for the procurement of 10 light emitting diodes, identified by NSN 5980015034554 and part number CMD15-21UCG from Chicago Miniature Lighting, LLC. The order is managed under solicitation number SPE7M5-26-T-410S with a required delivery date of August 11, 2026, and a delivery window of 10 days after the order is received. Shipping is set as FOB Origin, with both inspection and acceptance occurring at the destination. The items are to be delivered to the US Army 0215 CS BN CO A Distribution center at Fort Hood, Texas. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must adhere to DLA packaging requirements RP001. The contract emphasizes that the provided items must meet all cited technical data and quality requirements specified in the DLA Master List, including the removal of government identification from any non-accepted supplies.
Semiconductor and Related Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details