Top

Remanufacturing the Miter Gate Actuators of Locks Four and Five

Awarded

W911WN26P1BT6Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

The US Army Corps of Engineers plans to award a sole-source purchase order to Kerry Company, Inc. for the comprehensive remanufacturing of the Miter Gate Actuators for Locks 4 and 5 on the Allegheny River, with the work to be performed to a new and improved design. The contract requires full disassembly of both actuators, followed by rigorous inspection, electrical testing, cleaning, and surface preparation including steam cleaning, bake-out, and sandblasting. Key deliverables include reassembly with two new bearings per actuator, re-honing of cylinders, installation of updated pistons and glands with enhanced seal designs, and provision of complete seal kits for cylinders and hydraulic power units. Also required are the supply and installation of valve kits, approximately 60 gallons of food-grade hydraulic oil, stainless-steel tubing and fittings, replacement of two bronze bushings per trunnion, and repair and re-chroming of thrust rods. The actuators must be refinished with Macropoxy 646 primer at 4.0 to 6.0 mils dry film thickness and an Acrolon 218 HS topcoat at 2.0 to 4.0 mils, matched to the original factory color. Additional critical components to be furnished and installed include a quick-disconnect manifold, reservoir end plate, two pressure tubes, two suction strainers, a P3AAN3040 bi-rotational hydraulic gear pump, and a full set of pump-to-motor couplings and spider assemblies. This action does not include modifications to the Cardanic Ring. This is a non-competitive procurement with the sole intent of awarding the contract to Kerry Company, Inc., and interested parties may submit a capability statement by July 7, 2026, to express interest or capability, though submission does not guarantee competition. All responses must include company name, UEI number, CAGE code, point of contact details, and a detailed technical capability statement addressing the full scope of work. The procurement is managed by the Office of Water Resources in Pittsburgh, Pennsylvania, and is issued under 41 U.S.C. § 3304(a)(1) for public transparency.

General Info

Kerry Company to remanufacture Miter Gate Actuators at Locks 4 and 5 per new specs with full rebuild, repaint, and upgraded components.

Agency

Department Of Defense → W072 Endist PittsburghView Agency

NAICS

333995 - Fluid Power Cylinder and Actuator ManufacturingView NAICS

Place of Performance

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseAwarded

PostedJun 22

Justification (J&A)

AwardedSep 12

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

AgencyDepartment Of Defense → W072 Endist Pittsburgh

Contacts1 person available

OfficePITTSBURGH, PA, 15222-4198, USA

Organization / Agency

Department Of Defense → W072 Endist Pittsburgh

View Agency Profile

Office AddressPITTSBURGH, PA, 15222-4198, USA

Contacts

ISAIAH JOHNSON

contact@example.gov

Full Description

The US Army Corps of Engineers intends to award the Kerry Company, Inc. with a purchase order to remanufacture the Miter Gate Actuators of Locks 4 and 5 on the Allegheny River. The contractor shall remanufacture both actuators simultaneously to their new and improved design. This contract does not include any modifications or improvements performed on the Cardanic Ring.The work includes disassembly of the motors, electrical testing and inspection of all components for wear and damage, steam cleaning, bake-out, sandblasting of required components, reassembly with two new bearings per actuator, final electrical testing, and painting. The contractor shall provide and install valve kits, approximately 60 gallons of food-grade hydraulic oil, re-hone the cylinders, furnish new pistons with updated seal designs, furnish new glands with updated seal designs, and provide complete seal kits for both the cylinders and hydraulic power units.The contractor shall sandblast and repaint the actuators using Macropoxy 646 at a dry film thickness of 4.0 to 6.0 mils, followed by an Acrolon 218 HS topcoat at a dry film thickness of 2.0 to 4.0 mils in the original factory color. The work also includes repair and re-chroming of the thrust rods, replacement of two bronze bushings in each cylinder trunnion, and furnishing stainless-steel tubing, fittings, and hardware as required.Additional components to be furnished and installed include a quick-disconnect manifold, reservoir end plate, two pressure tubes, two suction strainers, a P3AAN3040 bi-rotational hydraulic gear pump, and a complete set of pump-to-motor couplings and spider assemblies.THIS NOTICE IS NOT A REQUEST FOR COMPETITIVE QUOTES However interested parties may identify their interest and capability to fulfill this requirement by submitting a capability statement no later than 07 July 2026 to the point of contact listed below.SUBMISSION AND CONTACT INFORMATION Responses must include Company name, UEI number, CAGE code, point of contact information, and a detailed capability statement addressing the requirement. DisclaimerDetermination by the Government not to compete this proposed contract action based on responses to this notice is solely within the discretion of the Government.This notice is in accordance with 41 U.S.C. - 3304(a)(1) and fulfills the requirement for publicizing proposed contract actions.