Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

Remediation Design & Engineering for Contaminated Sites

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks qualified contractors to develop remedial action plans, feasibility studies, and detailed engineering designs to address soil and groundwater contamination at military installations across Europe. Work will focus on identifying the extent of pollutant sources, evaluating treatment technologies, and producing technically sound engineering solutions to remediate hazardous substances in compliance with environmental regulations. The effort is part of ongoing environmental restoration initiatives managed by the Department of Defense through its W2SD Endist Europe office, requiring expertise in environmental engineering, hydrogeology, and site characterization. All proposals must be submitted by July 30, 2026, at 1:00 PM, with the opportunity open as a subcontract under NAICS code 541330 for environmental consulting and engineering services. While the exact locations of performance are unspecified, the work is tied to U.S. military sites within Europe and requires adherence to DoD environmental protocols. Contractors must demonstrate proven experience in managing complex remediation projects, including the preparation of regulatory-compliant documentation and collaboration with federal environmental agencies. The contract does not specify any set-aside status, and all interested parties should access the official solicitation via the provided SAM.gov link for further details.

General Info

Contract for environmental remediation engineering at U.S. military sites in Europe, due July 30, 2026.

Agency

Department Of Defense → W2SD Endist EuropeView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

AE, DEU

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W2SD Endist Europe
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → W2SD Endist Europe
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Develop remedial action plans, feasibility studies, and engineering designs for soil and groundwater contamination at military sites.

Similar Contracts

Same NAICS industry code

NAICS: 541330
New
SLED
Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide Construction Management services through an Indefinite Delivery/Indefinite Quantity (IDIQ) contract to support a range of major construction projects across its facilities. These services will span the full lifecycle of projects including planning, design, construction, and closeout phases, with a focus on Design Build, Progressive Design Build, and alternative delivery methods. The contractor will be responsible for ensuring that all projects adhere to approved schedules, budgets, and quality standards while coordinating with Port staff and stakeholders to deliver complex infrastructure initiatives efficiently and effectively. The contract will serve as the primary mechanism for securing CM expertise across multiple future projects without specifying individual task orders at this time. The solicitation is classified under NAICS code 541330 for Architectural, Engineering, and Related Services and is managed by the Port’s Construction Management division. Primary point of contact for inquiries is Hala Rabbo, with additional support available from Project Manager Ann Davidson. The contract is forecasted for release in July 2026, though no formal solicitation number or set-aside details have been published. Performance will occur at various Port of Seattle locations, and interested firms are encouraged to monitor the official Port portal for official posting and submission guidelines. All contractors must demonstrate proven experience in managing large-scale public construction projects under similar delivery models.
Construction Management

POSTED

about 5 hours ago

DEADLINE

N/A
View Details
NAICS: 541330
New
SLED
Retro-Commissioning, TAB, Controls, and Regulatory Support IDIQThe consultant will deliver retro-commissioning, test/adjust/balance, controls, and regulatory support services across Seattle-Tacoma International Airport’s facilities and infrastructure systems, operating within a continuous 24/7/365 environment. The focus is on identifying and correcting performance deficiencies in mechanical, HVAC, plumbing, lighting, Direct Digital Controls, smoke control, and fire protection systems to enhance efficiency, reliability, comfort, and longevity while ensuring compliance with safety and regulatory standards. All work will be executed under Service Directives and executed in close coordination with Aviation Facilities and Infrastructure to meet agreed-upon deliverables. The contract is structured as an IDIQ vehicle under NAICS code 541330 and is managed by the Port of Seattle’s Aviation Facilities and Infrastructure division. Point of contact for inquiries and coordination includes Jason Gates as the primary liaison and Jim Farris as the project manager, with all communication and administrative details centered through the Port of Seattle’s official procurement portal. The solicitation was posted in July 2026 and is intended to establish a framework for ongoing support services critical to maintaining the airport’s complex operational systems.
Aviation Facilities & Infrastructure

POSTED

about 5 hours ago

DEADLINE

N/A
View Details
NAICS: 541330
New
SLED
Mechanical, Electrical, and Plumbing (MEP) EngineeringThe contract seeks qualified firms to design mechanical, electrical, plumbing, and fire protection systems for public buildings under a subcontract arrangement, classified under NAICS code 541330 for architectural and engineering services. The solicitation was posted on July 25, 2026, with a response deadline set for September 7, 2026, and is being managed by the State of Utah, though no specific city or office address is provided. Scope of work includes comprehensive MEP system design for public infrastructure projects, requiring technical expertise in integrated building systems to meet safety, efficiency, and code compliance standards. While no set-aside provisions or point of contact details are listed, interested parties must submit proposals through the designated online portal by the stated deadline.
Utah

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 541330
New
SLED
Structural Engineering ServicesThe contract titled Structural Engineering Services seeks qualified providers to perform structural analysis and design for buildings and structures, with specific emphasis on foundation systems and seismic evaluations to ensure compliance with safety and resilience standards. Work is expected to involve detailed engineering assessments, modeling, and documentation to support the integrity and durability of constructed facilities under dynamic and environmental loads. The opportunity is categorized as a subcontract and was posted on July 25, 2026, with responses due by September 7, 2026, and is governed under NAICS Code 541330 for architectural and engineering services. All performance obligations are tied to the state of Utah, though no specific city or address is provided, and the contracting entity is identified as the Utah state agency without further organizational subdivision or point of contact details listed.
Utah

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 541330
New
SLED
BD26-XX Pre-Qualified Design Professional Services Pre-Qualified Vendor ListThe State of Utah Division of Purchasing is seeking statements of qualifications from design professionals to establish a pre-qualified vendor list for architectural and engineering services, under the solicitation number BD26-XX. This open-ended list will remain active for twelve months from the date of approval, after which vendors must resubmit their qualifications for renewal. The State reserves the right to reopen the solicitation at any time, though not more frequently than once every twelve months, to accommodate additional qualified vendors or adjust criteria as needed. The posting date is July 25, 2026, with responses due by September 7, 2026, and all selections will be managed through the state’s procurement platform. Interested firms must submit their credentials to be considered for inclusion, which does not guarantee work but enables eligibility for future project assignments. The point of contact for this solicitation is Brayden Dent, reachable via email at braydend@utah.gov, and all submissions must be made through the official online portal at the provided UI link. The procurement is not subject to any specific set-aside classifications and applies across the State of Utah with no designated city or zip code for performance, meaning services may be required anywhere within the state. Vendors are expected to demonstrate relevant experience, expertise, and capability in design services appropriate for public sector projects. Approval does not constitute a contract or commitment to award work but allows the State to directly engage pre-qualified firms as needs arise, streamlining the selection process for time-sensitive or recurring design projects.
Utah

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 541330
New
DIBBS
Quality Assurance and Sampling Inspection ServicesThis contract requires the performance of quality assurance and sampling inspection services under MIL-STD-1916 or ASQ H1331 Table 1, with a strict zero tolerance policy for any non-conformances on critical, major, and minor attributes. The work involves rigorous inspection protocols to ensure every product meets exacting standards without exception, targeting high-stakes components where even minor deviations are unacceptable. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to respond, reinforcing the intent to support small business participation in defense-related quality initiatives. The NAICS code 541330 indicates the primary focus is on scientific and technical consulting services, specifically quality control and inspection activities, and the contracting activity is under the ASC Commodities Division of the Department of Defense. The opportunity was posted on July 25, 2026, with a response deadline of August 8, 2026, providing a two-week window for qualified small businesses to submit proposals. While no specific place of performance or point of contact is detailed in the provided data, the work is tied to a Defense Logistics Agency procurement platform, suggesting inspections will support the broader DOD supply chain. The absence of an office address or zip code implies that the location of performance may be flexible or determined by the nature of the subcontracted materials being inspected, potentially across multiple facilities or contractor sites under the DOD’s control. The requirement underscores the critical importance of precision and compliance in defense-related quality assurance, where failure to meet zero tolerance standards could compromise operational readiness and safety.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 541330
New
DIBBS
Supply Chain Traceability & Quality Documentation ServicesThe contract requires comprehensive documentation and recordkeeping services to ensure end-to-end supply chain traceability in alignment with DLA quality standards, focusing on full visibility and accountability across all procurement and logistics activities. All work must adhere to the specified compliance framework to support audit readiness and operational integrity, with deliverables designed to validate the provenance and integrity of materials throughout the supply chain. This subcontract falls under NAICS code 541330 and is managed by the ASC Commodities Division within the Department of Defense, with responses due by July 31, 2026. The place of performance and point of contact details are not specified, but performance is expected to support DLA’s broader mission of maintaining rigorous quality control across defense supply networks.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 541330
New
Federal
Inspection, Testing, and Quality Assurance ServicesThe contract requires the performance of technical inspection and testing on newly manufactured compressor ducts at both their origin and destination locations to verify full compliance with established engineering and qualification standards. This work is critical to ensuring that each duct meets stringent performance, safety, and reliability criteria before being accepted for use in defense-related systems. The scope is focused on quality assurance through rigorous testing protocols and documentation, with an emphasis on traceability and adherence to technical specifications throughout the supply chain. This is a subcontract under the NAICS code 541330 for engineering services, issued by the Department of Defense through the Ok DLA Aviation office in Oklahoma City. The solicitation was posted on July 25, 2026, with a response deadline of August 25, 2026. While specific location details for performance are not provided, the work must be conducted at manufacturing sites and final delivery points to cover the full lifecycle of the components. There is no set-aside designation, indicating this opportunity is open to all eligible contractors, and the successful bidder will be responsible for delivering comprehensive inspection reports and test data to confirm regulatory compliance.
Ok DLA Aviation At Oklahoma City

POSTED

1 day ago

DEADLINE

in 29 days
View Details
NAICS: 541330
New
Federal
On-Site Security System Testing & Compliance VerificationThe contract titled On-Site Security System Testing & Compliance Verification requires the performance of scheduled functional testing on security alarm components to ensure operational integrity and adherence to federal standards. Tasks include verifying system functionality, documenting test results, and providing support necessary for annual certification. All work must be conducted on-site at the specified location in Salem, with a zip code of 01970, and must meet rigorous compliance benchmarks tied to federal requirements for security systems. The contractor is expected to deliver thorough and accurate records to facilitate regulatory certification. This is a subcontract under NAICS code 541330, posted by the Department of the Interior through its office Ner Services Mabo (43000). The solicitation opened on July 25, 2026, with a deadline for responses set for August 7, 2026, at 2:00 PM. No set-aside classification is designated, and the contract is not associated with a specific point of contact or additional office address beyond the place of performance. All work must be completed in accordance with the stated federal compliance framework and submitted for certification purposes within the contractual obligations.
Ner Services Mabo (43000)

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 541330
New
SLED
Generator Condition Assessment & ReportingThe contract requires comprehensive assessments of generator systems to ensure operational readiness and compliance, encompassing load bank testing to verify performance under simulated full-demand conditions, emissions evaluations to meet environmental standards, and detailed fuel quality analyses to detect contamination or degradation that could compromise system reliability. All findings and test results must be compiled into formal technical reports and submitted electronically via email, with copies retained for audit purposes to support accountability and regulatory compliance. The work is scoped as a subcontract under NAICS code 541330, which pertains to engineering services, and is issued by the Texas Department of Public Safety with a response deadline of August 14, 2026. The assessment activities are critical for maintaining emergency power infrastructure and must be performed to a high standard of technical accuracy and documentation rigor.
Department of Public Safety

POSTED

2 days ago

DEADLINE

in 19 days
View Details
NAICS: 541330
New
SLED
Diagnostic and Troubleshooting Services for Water Treatment EquipmentThe contract awards services to perform up to three diagnostic evaluations aimed at identifying malfunctions within a water treatment system. Each evaluation includes comprehensive testing, root cause analysis, and detailed reporting to ensure accurate identification and documentation of system failures. The work is focused on ensuring operational integrity and compliance with water treatment standards, with all activities to be conducted at a designated location in Fresno. This is a subcontract under the NAICS code 541330, categorized as a professional, scientific, and technical service. The solicitation was posted on July 25, 2026, with responses due by August 11, 2026, at 10:00 PM Pacific Time. The contracting agency is the California Department of Fish & Wildlife, operating under the state of California, and the work is intended to support water infrastructure reliability within the state’s environmental management framework.
California Department of Fish & Wildlife

POSTED

2 days ago

DEADLINE

in 16 days
View Details
NAICS: 541330
New
SLED
MEP Engineering ServicesTexas Southern University is seeking qualified subcontractors to provide MEP engineering services for the design and integration of HVAC, electrical, plumbing, and fire alarm systems within renovated study rooms. The project requires seamless coordination across all disciplines to ensure functional, code-compliant, and efficient building systems that support the academic environment. The contract is open for responses until August 18, 2026, with work to be performed on campus at the university’s location. The solicitation falls under NAICS code 541330, classifying it as architectural and engineering services, and is structured as a subcontract opportunity through the Texas SmartBuy procurement portal. Bidders must demonstrate expertise in multi-system integration and experience with institutional facility upgrades, though no specific set-aside provisions apply. All proposals must align with the university’s operational standards and technical requirements for renovated study spaces.
Texas Southern University

POSTED

2 days ago

DEADLINE

in 23 days
View Details

More opportunities from Department Of Defense → W2SD Endist Europe

Same awarding agency

NAICS: 23
New
Federal
Reverse Industry Day – Capabilities and Experience with Alternate Design and Delivery Methodologies (ADDM) for USACE Europe DistrictThe U.S. Army Corps of Engineers Europe District is conducting a Reverse Industry Day on August 11, 2026, in Frankfurt, Germany, to gather direct industry input on emerging acquisition and project delivery methodologies, particularly Progressive Design-Build, Design-Build to Budget, Integrated Design and Construction, and Other Transaction Authorities. This event is not a procurement solicitation but an open forum for industry to share real-world experiences, challenges, and best practices in delivering federal and commercial infrastructure under collaborative delivery models, with a focus on overcoming Host Nation permitting barriers in Europe and aligning U.S. standards with local codes like German DIN/Eurocodes. Submission of case studies and panelist qualifications is required by July 28, 2026, with only up to five firms invited to present detailed project examples and another five to contribute to a roundtable on operational challenges including SOFA, tax/VAT clearance, labor shortages, and Bauamt timelines. Attendance is free, limited to two representatives per company, and all submissions must be public and non-proprietary. The event directly informs future USACE Europe acquisition planning, especially regarding the planned use of a PDB-OTA vehicle for the SOCEUR Command and Control Facility, a high-security project involving demolition of an existing structure and construction of a multi-story facility with advanced cybersecurity, redundancy, and AT/FP standards. Registration closes August 3, 2026, and interested parties must engage solely through designated points of contact using specified subject lines. The contract framework operates under an Other Transaction Authority (OTA) rather than traditional FAR-based procurement, enabling flexibility in structure and negotiation to support rapid, collaborative project advancement. The delivery model is phased: Phase 1 focuses on design development and establishment of a Guaranteed Maximum Price through a qualifications-based selection process, where evaluation emphasizes team composition, past relevant experience, innovation in collaboration, and overall competence—not price. Price is negotiated only after the most qualified team is selected. The agreement includes non-FAR provisions such as Article 25 on liquidated damages, Article 27 on Buy American compliance under trade agreements, Article 28 on small business subcontracting, and Article 31 requiring DX priority rating adherence. Additional requirements include strict compliance with UFC standards, Davis-Bacon wage determinations, NISPOM and ITAR/EAR controls, a unique provision granting the Government ownership of all design work if the project terminates before GMP negotiation, and financial risk allocation where the Government is not liable for subcontractor interest penalties
Construction

POSTED

2 days ago

DEADLINE

in 7 days
View Details
NAICS: 236220
New
Federal
Solicitation for DHA Minor Construction in Germany, Belgium, and ItalyThe United States Army Corps of Engineers Europe District is issuing a single-award indefinite-delivery indefinite-quantity design-build task order contract for minor construction services to support Defense Health Agency facilities in Germany, Belgium, and Italy. The contract will cover a broad range of activities including repair, renovation, conversion, alteration, additions, construction, and the procurement and installation of equipment. The base ordering period is three years, expected to begin around September 2026, with an optional two-year extension. Proposals are due on August 14, 2026, following a series of amendments that extended the submission deadline to May 27, 2026, updated key documentation such as the Bank Letter of Assurance template, modified Surety of Performance requirements, and revised anti-mafia screening protocols. A site visit is scheduled for July 29, 2026, and additional guidance on commencement and execution of work has been provided in updated attachments. The solicitation, identified as W912GB26RA019, falls under NAICS code 236220 and is managed by the Europe District office in APO, AE, with Jae Chang as the primary point of contact. The contract is open to all eligible offerors who progress through the evaluation phases, with advanced vendors receiving specific notices via Amendment 0004.
Commercial and Institutional Building Construction

POSTED

4 days ago

DEADLINE

in 19 days
View Details
NAICS: 23
New
Federal
Market Survey – Industry Capabilities and Experience with Alternate Design and Delivery Methodologies (ADDM) for USACE Europe DistrictThe U.S. Army Corps of Engineers Europe District is conducting a market survey to assess industry capabilities and interest in alternative design and delivery methodologies for architect-engineer and construction projects across its OCONUS area of responsibility. This special notice is not a solicitation and does not obligate the government to issue a contract or compensate respondents; all submissions become government property and must be submitted by July 13, 2026, in PDF or Word format not exceeding eight pages. The survey aims to collect detailed information on industry experience with collaborative delivery models including Progressive Design-Build, Design-Build to Budget, Integrated Design and Construction, Other Transaction Authorities, and early contractor involvement, with specific focus on budget control mechanisms, risk-sharing frameworks, cost-growth mitigation strategies, and successful implementation of these models in geopolitically complex environments. Respondents are asked to provide up to three project examples with outcomes, lessons learned, and details on tools used for real-time budget transparency and team collaboration. The survey results will inform the planning of a Reverse Industry Day scheduled for August 11, 2026, where selected firms may be invited to present case studies. The initiative is grounded in the use of Other Transaction Authorities, which operate outside the traditional FAR-based contract framework, allowing for greater flexibility in structuring agreements, reducing administrative barriers, and enabling commercial-style terms. The government has referenced a detailed playbook outlining templates for PDB with OTA processes, including evaluation plans, solicitation samples, and agreement templates, emphasizing a shift toward innovative, non-traditional contracting. Participation in the survey does not require a determination of responsibility or FAR compliance, but awardees must be registered in SAM.gov and not be excluded from federal awards. The NAICS code 23 applies, and no set-aside is utilized. Point of contact for submissions is Andrew Cochran with Ekaterina Oxley on CC, and responses must avoid proprietary or sensitive information. While no contract value or performance period is defined, the place of performance is tied to Wiesbaden, Hesse, and the overarching goal is to develop more agile, collaborative, and cost-efficient project delivery methods for future USACE Europe District procurements.
Construction

POSTED

4 days ago

DEADLINE

in 7 days
View Details
NAICS: 423830
New
Federal
ITAR/EAR-Compliant Supply Chain & Subcontracting
Industrial Machinery and Equipment Merchant Wholesalers

POSTED

5 days ago

DEADLINE

in 7 days
View Details
NAICS: 541611
New
Federal
Small Business Subcontracting Plan Implementation
Administrative Management and General Management Consulting Services

POSTED

5 days ago

DEADLINE

in 7 days
View Details
NAICS: 238290
New
Federal
Fire Protection Systems Installation
Other Building Equipment Contractors

POSTED

5 days ago

DEADLINE

in 7 days
View Details
NAICS: 238220
New
Federal
Mechanical & HVAC Systems Installation
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

5 days ago

DEADLINE

in 7 days
View Details
NAICS: 238210
New
Federal
Electrical Systems Installation
Electrical Contractors and Other Wiring Installation Contractors

POSTED

5 days ago

DEADLINE

in 7 days
View Details
NAICS: 236220
New
Federal
Construction Management & Execution (Phase 2)
Commercial and Institutional Building Construction

POSTED

5 days ago

DEADLINE

in 7 days
View Details
NAICS: 541310
New
Federal
Design Development & Guaranteed Maximum Price (GMP) Proposal
Architectural Services

POSTED

5 days ago

DEADLINE

in 7 days
View Details
NAICS: 541330
Federal
New Environmental A-E MATOC - GermanyThe United States Army Corps of Engineers Europe District is soliciting bids for a Multiple Award Task Order Contract (MATOC) to secure architect-engineering services under NAICS code 541330, Engineering Services, in support of environmental missions across the U.S. European Command Area of Responsibility. The procurement aims to award up to three Indefinite Delivery Contracts with a combined estimated value of $49 million over a five-year base ordering period, with an option to extend each contract for up to six months under FAR 52.217-8. The effort follows the Brooks Act and is governed by the Revolutionary FAR Overhaul provisions in FAR 36.102 and 36.202, along with DFARS 236.102 under class deviation 2026-O0019. Work will involve delivering technical environmental engineering services such as soil and groundwater investigations, asbestos surveys, facility improvement planning, and permitting support to military installations, primarily in Bavaria and surrounding areas including Ansbach, BENELUX, Rhineland-Palatinate, and Wiesbaden, with potential expansion to other locations in Germany. All deliverables must adhere to U.S. and German regulatory standards, and the contractor must ensure compliance through a corporate-level QA/QC plan aligned with ER 1110-1-12, submitted for government approval prior to task order award. Offerors must be currently registered in the System for Award Management and maintain active registration throughout performance, as mandated by FAR 52.204-7 and 52.204-13. Proposals must be submitted as a typed, tabbed, and organized SF 330 via email in English, with each section clearly delineated and accompanied by supporting documentation including a past performance questionnaire and letter of commitment. Each proposed firm, including subconsultants and freelance associates, must submit its own SF 330 Part II. Evaluation will be based on a subjective assessment across five weighted criteria: specialized experience and technical competence (with up to six qualifying projects), personnel qualifications including professional certifications and language proficiency in both English and the host nation’s language, past performance verified through CPARS evaluations, knowledge of the local operational environment, and demonstrated capacity to handle up to seven task orders annually with a combined value of $2.5 million. Mandatory requirements include project eligibility (minimum 90% financial completion or completion within the last six years), certification
Engineering Services

POSTED

26 days ago

DEADLINE

in 4 days
View Details
NAICS: 541620
Federal
Quality Assurance/Quality Control (QA/QC) for Environmental ProjectsThe contract seeks a subcontractor to develop and implement Quality Assurance/Quality Control (QA/QC) plans aligned with ER 1110-1-12 for environmental projects, ensuring all technical deliverables meet required standards for compliance and accuracy. The work involves systematic review of project outputs to verify adherence to regulatory and technical specifications, with a focus on maintaining rigorous quality controls throughout the project lifecycle. The opportunity is classified under NAICS code 541620 and is issued by the Department of Defense through W2SD Endist Europe. The solicitation was posted on June 30, 2026, with responses due by July 30, 2026, at 1:00 PM. The place of performance and specific location details are not provided, and no set-aside information is specified. The contract is structured as a subcontract, indicating it supports a broader prime contract effort. Interested parties must submit proposals through the provided SAM.gov link before the deadline.
Environmental Consulting Services

POSTED

27 days ago

DEADLINE

in 4 days
View Details