Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Remote Annunciator and Control Integration

Active

Federal

Response Deadline08/11/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the installation and integration of remote annunciators and control interfaces to connect fire detection systems with chamber control systems, enabling centralized monitoring across facilities at Fort Huachuca, Arizona. This effort is critical to ensuring real-time visibility and coordinated response capabilities between fire safety infrastructure and environmental control systems within sensitive operational chambers. The work requires precise technical coordination to interface legacy and modern systems, ensuring full compatibility, reliability, and compliance with mission-critical safety standards. The opportunity is structured as a subcontract under the NAICS code 541330, indicating it falls within engineering services, and is administered by the Department of Defense through the W6QK Acc-Apg Cont Ct Software Sector. The solicitation was posted on August 7, 2026, with proposals due by August 11, 2026, and performance is expected to be completed at the designated location in Fort Huachuca. While no set-aside provisions or point of contact information are provided, interested parties must adhere strictly to the submission deadline and technical requirements to qualify for award.

General Info

Install remote annunciators and control interfaces for fire and chamber system integration at Fort Huachuca.

Agency

Department Of Defense → W6QK Acc-Apg Cont Ct Software SectorView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

Fort Huachuca, AZ, 85613, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 7

subcontract

Response DeadlineAug 11

Submission deadline

Response Deadline

08/11/2026, 04:00:00 PM UTCin 3 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W6QK Acc-Apg Cont Ct Software Sector

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → W6QK Acc-Apg Cont Ct Software Sector

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Installation and integration of remote annunciators and control interfaces to link fire detection systems with chamber control systems for centralized monitoring.

Similar Contracts

Same NAICS industry code

SEEKING QUALIFIED SUBCONSULTANTS IN RIVERSIDE COUNTY/SOCAL TO SUPPORT WELL REPLACEMENT PROJECT WITH WATER DISTRICT

Solicitation # seeking-qualified-subconsultants-riverside-countysocal-support-well-replacement-project-water

GHD Inc. is soliciting qualified subcontractors to support the Corydon Well Replacement Design Project for Elsinore Valley Municipal Water District in Riverside County, California, with a focus on engaging Disadvantaged Business Enterprises, Small Business Enterprises, Women-Owned Business Enterprises, Minority-Owned Business Enterprises, and other eligible firms under SBA set-aside programs. The scope of work encompasses a broad range of professional services including engineering, environmental consulting, surveying, geotechnical analysis, permitting, public outreach, and utility location, aligned with NAICS codes such as 541330 and others related to architectural and engineering services, construction, and regulatory support. Interested firms must submit a qualifications package by August 7, 2026, and request solicitation documents by 5 p.m. PST on August 14, 2026, to receive full project details, with the formal response deadline for proposals set for September 15, 2026. All interactions and submissions should be directed to Charlie Brown at charles.brown@ghd.com, and performance is expected to occur within the service area of the Elsinore Valley Municipal Water District in Southern California.

POSTED

about 12 hours ago

DEADLINE

in about 1 month

Corydon Well Replacement (C2305)

Solicitation # C2305

Ardurra Group, Inc. is soliciting proposals from Disadvantaged Business Enterprise (DBE) firms to provide comprehensive design, bidding support, and engineering services during construction for the Corydon Well Replacement Project in California, under solicitation number corydon-well-replacement-c2305-1. The project entails designing a new municipal groundwater production well to replace and abandon the existing Corydon well, with work divided into two phases: Phase 1 includes technical specifications, civil site design, line-bid items for drilling and abandonment, bidding assistance, and full-time on-site construction management oversight in compliance with Riverside County and California State Water Resources Control Board requirements; Phase 2 involves detailed architectural, civil, mechanical, structural, electrical, and instrumentation and controls design drawings along with a line-item bid schedule for equipping, testing, and commissioning. The new well must meet AWWA standards, utilize a 24-inch diameter stainless steel Ful-Flo louvered screen, match existing vertical turbine equipment, tie into the Corydon Blend station and Malaga blending location, and comply with SWRCB-DDW, DWR, and EVMWD requirements. Key deliverables include a Preliminary Design Report at up to 30% design completion, review of approximately 200 submittals, assistance with a Domestic Water Supply Permit Amendment, and development of Record Drawings reflecting field changes alongside start-up and operator training support. The contract is governed by the Federal Acquisition Regulation with incorporated clauses including 2 CFR Subtitle A, Part 200, 2 CFR 1400 and 1401, DOI Standard Award Terms, and 48 CFR 52.203-17 for subawards over the simplified acquisition threshold. Respondents must complete mandatory certifications in Attachment “2,” including American Iron and Steel Certification, Debarment and Suspension Certification, SAM Information, Executive Order N-6-22 Certification, Conflict of Interest Disclaimer, Insurance Acknowledgment, Public Works Contractor Registration, and DBE Subconsultant Information. The RFP requires strict adherence to Build America Buy America Act compliance, including domestic-content documentation and waiver procedures for non-compliant materials, and prohibits procurement of equipment from Huawei or ZTE. The award will be based on demonstrated competence and professional qualifications, with evaluation factors weighted as follows: Relevant Qualifications/Experience (25%), Understanding of Project and Project Approach (25%), Scope of Work and Schedule (20%),

Ardurra Group, Inc.

POSTED

about 12 hours ago

DEADLINE

Corydon Well Replacement Project - Professional Design, Bidding Support, Engineering Services During Construction

Solicitation # corydon-well-replacement-project-professional-design-bidding-support-engineering-services-during-0

The Corydon Well Replacement Project, managed by the Elsinore Valley Municipal Water District, calls for comprehensive professional design, bidding support, and engineering services during construction for a critical water infrastructure upgrade in Lake Elsinore, Riverside County, California. The work encompasses the full lifecycle support of replacing an existing well, including detailed engineering plans, assistance with the procurement process, and ongoing technical oversight during implementation to ensure compliance, safety, and efficiency. The solicitation is open to qualified firms with expertise in water system design and construction support, and participation is encouraged for Disadvantaged Business Enterprises as part of the Department of Transportation’s DBE program. The NAICS code 541330 classifies the required services under engineering services, and all proposals must be submitted by September 1, 2026, with inquiries directed to Katie Neubauer of AKM Consulting Engineers, the contracting agency.

AKM Consulting Engineers

POSTED

about 12 hours ago

DEADLINE

Corydon Well Replacement Project – Professional Design, Bidding Support and Engineering Services During Construction

Solicitation # WO# C2305

The Corydon Well Replacement Project entails the design of a new municipal groundwater production well to replace and formally abandon the existing Corydon Well on Elsinore Valley Municipal Water District (EVMWD) property, with all work conducted in compliance with California State Water Resources Control Board and Riverside County regulations. The project is divided into two phases: Phase 1 focuses on hydrogeological evaluation, aquifer analysis, well design matching the existing casing depth and sanitary seal standards per AWWA guidelines, civil and site engineering for wellhead facilities, bidding assistance, and full-time on-site construction management and hydrogeological oversight during drilling. Phase 2 involves engineering design for well equipping—including architectural, structural, mechanical, electrical, instrumentation, and controls systems—alongside support during bidding and ongoing engineering oversight during construction. Technical specifications require a 24-inch diameter stainless steel Ful-Flo louvered screen compatible with local geology, and all materials must comply with the Build America, Buy America Act and domestic content requirements under 2 CFR Part 184, with documented efforts to source U.S.-produced iron, steel, and manufactured products. The project spans from initiation in November 2026 through completion in May 2028, with a contract value not exceeding $1,000,000, partially funded by a $400,000 Bureau of Reclamation grant requiring adherence to federal administrative, audit, and procurement rules under 2 CFR Part 200. Proposals must include detailed qualifications, resumes of key personnel, relevant municipal water and groundwater project experience, current California professional licensure, DBE subconsultant participation details, and a comprehensive cost proposal broken down by task with hourly rates and incidental costs. Submissions must be made through EVMWD’s PlanetBids portal by the September 1, 2026 deadline and include mandatory certifications for debarment and suspension, lobbying compliance, American Iron and Steel compliance, executive order N-6-22 sanctions screening, insurance acknowledgment, and non-collusion declarations. Evaluation prioritizes demonstrated technical competence and experience (25%), followed by understanding of project objectives (25%), schedule and risk management (20%), innovation (10%), cost value (10%), and overall proposal quality (10%), with the award based on qualifications rather than lowest cost. The consultant must provide monthly progress reports, detailed invoices, and maintain full records for four years post-final payment subject to audit. All

GEI Consultants, Inc.

POSTED

about 12 hours ago

DEADLINE

Design and Engineering of Integrated PA SystemThe contract involves the system design, architectural integration, and development of detailed technical specifications for a district-wide public address system to be implemented across multiple school facilities within North East ISD in Texas. The scope requires comprehensive engineering work to ensure seamless communication capability throughout all designated locations, with strict adherence to life-safety codes and industry standards to guarantee reliability in emergency situations. The project demands coordination with existing infrastructure and future expansion plans, requiring expertise in acoustic planning, network integration, and fail-safe communication protocols. This is a subcontract opportunity under NAICS code 541330, which pertains to architectural, engineering, and related services. The solicitation was posted on August 7, 2026, with responses due by August 27, 2026. All work must be performed within the district’s jurisdiction, and contractors are expected to demonstrate proven experience in large-scale educational facility deployments. The contract does not specify a set-aside program, and while no point of contact is listed, all inquiries and submissions must follow the process outlined through the provided online portal.

POSTED

about 17 hours ago

DEADLINE

A/E RFQ - Ballistic Aero-Optics and Materials Range Phase 2 - Bryan, Texas

Solicitation # TAMUS-RFQ-01-3489

The Texas A&M University System, through its Office of Facilities Planning & Construction, is seeking qualified Architect/Engineer firms to support the Ballistic Aero-Optics and Materials Range Phase 2 project at the RELLIS Campus in Bryan, Texas. This initiative expands upon a facility completed in 2024 to significantly enhance capabilities in aero-optics and hypersonic testing, including extending aero-optics performance beyond 1,000 meters and hypersonic testing beyond 500 meters, while doubling the recovery tube length from 305 meters to approximately 610 meters. The project calls for the design and construction of critical infrastructure components including a new Tail Building at the south end of the range to house the relocated Laser Firing Tank and final sections of the recovery tube, as well as at least two additional test buildings aligned with project test sections. Standardized 14.6-meter range tube sections will be used throughout the expansion. The total planning budget for the project is $70,605,000, with $17,129,803 allocated specifically for the construction contract, while the remainder covers fees, furnishings, contingencies, and related expenses. Selection will proceed through a qualifications-based process where firms submit statements of qualifications via the e-Builder portal by 2:00 p.m. Central Time on September 1, 2026. The top-ranked respondents may be invited to present their qualifications in an interview, but no pricing or cost information is solicited at this stage. All firms must complete the State of Texas Subcontracting Plan form, for which guidance and a tutorial are provided by the system’s Office of Procurement & Business Services. Inquiries must be directed to Jeff Herring at the Texas A&M University System Office of Facilities Planning & Construction, with contact information provided for phone and email. The solicitation is issued under NAICS code 541330 and administered by a state educational agency with no set-aside provisions identified.

Texas A&M University System

POSTED

about 17 hours ago

DEADLINE

Transportation and Economic Corridors - Request for Proposal - CON0025815-OVERLAYS of HWY 49:06 and HWY 49:08

Solicitation # AB-2026-05586

Alberta Transportation and Economic Corridors is soliciting proposals from three pre-qualified firms—Associated Engineering Alberta Ltd., Progressive Engineering and Consulting Ltd. (dba CAP Engineering), and ISL Engineering and Land Services Ltd.—for comprehensive engineering services on two sections of Highway 49: Overlay limits 34.946 to 52.425 (WAC0077705) and 0.000 to 2.486 (WAC0077705). The scope includes preliminary engineering, detailed design, contract tendering, contract administration, construction supervision, post-construction review, and warranty inspections. Proposals must be submitted in two separate PDF files under 10 MB each: one detailing technical qualifications and the other containing the proposal fee. This is a Request for Proposal, not an Invitation to Tender, and only submissions from the listed firms will be considered. Alberta Transportation and Economic Corridors reserves the right to request clarifications, accept or reject proposals without negotiation, or negotiate changes with the selected firm. There is no reimbursement for proposal preparation costs. Selection will be based on overall value, not simply the lowest price. The deadline for submissions is September 2, 2026, at 5:30 AM MT, and inquiries should be directed to Rence Balaccua, Project Procurement Officer.

Transportation and Economic Corridors

POSTED

about 20 hours ago

DEADLINE

Construction Engineering & Inspection (CEI) ServicesThe contract is for Construction Engineering & Inspection services encompassing onsite inspection, materials testing, and quality assurance and quality control activities related to road, grading, and utility construction projects. It is issued as a subcontract under NAICS code 541330 by the Development Authority of Dawson County in Georgia, with a posted date of August 7, 2026, and a mandatory response deadline of September 7, 2026. The scope requires qualified contractors to provide technical oversight throughout all phases of construction, ensuring compliance with engineering standards and specifications. Performance will occur at unspecified locations within Dawson County, and while the exact point of contact and physical address details are not provided, interested parties must submit proposals through the designated state portal by the stated deadline.

Development Authority of Dawson County

POSTED

about 20 hours ago

DEADLINE

in about 1 month

Civil Site Engineering & Grading DesignThe contract entails the comprehensive design and engineering services for the site grading, access roads, and overall layout of a 200,000 square foot industrial park, with a strong emphasis on integrating topographic data and accurate earthwork calculations to ensure proper land transformation and infrastructure alignment. The scope requires detailed civil site engineering expertise to translate terrain conditions into practical, buildable designs that meet regulatory and functional standards for industrial development. The work is solicited as a subcontract under NAICS code 541330, with a response deadline of September 7, 2026, and is managed by the Development Authority of Dawson County in Georgia. The project is set to be performed on-site within Dawson County, though specific location details are not provided. The contract was posted on August 7, 2026, and no set-aside provisions or point of contact information are indicated, leaving potential bidders to engage directly through the provided online portal for further instructions and submissions.

Development Authority of Dawson County

POSTED

about 20 hours ago

DEADLINE

in about 1 month

RFQ for Engineering and Construction Services

Solicitation # BIP-0001-2026-R

The Dawson County Development Authority is seeking qualified consulting firms or teams to submit Statements of Qualifications for engineering and construction services related to the Business and Innovation Park Project, a major development encompassing approximately 200,000 square feet of buildings along with comprehensive site improvements including grading, roads, utilities, stormwater management, erosion control, environmental assessments, and archaeological evaluations. The project also requires offsite infrastructure extensions, specifically a water main connection to the City of Dawsonville’s existing water system and a sanitary sewer lift station with a force main linked to the city’s sewer network. This solicitation does not involve any immediate work but serves as a pre-qualification process to identify capable consultants for future contract awards. Proposals must be submitted by September 7, 2026, and are to be directed to Mandy Power at the Development Authority of Dawson County, with all information available through the provided state portal link. The solicitation is open to any qualified firm without set-aside restrictions and is classified under a state-level procurement process.

Development Authority of Dawson County

POSTED

about 20 hours ago

DEADLINE

in about 1 month

Preconstruction ServicesThe contract involves providing comprehensive preconstruction services for a project managed by the Georgia Institute of Technology, with responsibilities including detailed planning, accurate cost estimating, development of realistic scheduling timelines, and value engineering initiatives conducted in close coordination with the design team to optimize efficiency and budget alignment. These services are critical to laying the foundation for successful project execution by identifying potential risks, reducing cost overruns, and enhancing design functionality before actual construction begins. The solicitation is classified as a subcontract under NAICS code 541330, which pertains to architectural, engineering, and related services, and the response deadline is set for August 28, 2026, with the posting date indicating a forward-looking procurement cycle beginning in August 2026. The place of performance and organizational details are not fully specified, but the agency’s name and the nature of the services confirm the project’s institutional context within an academic and research infrastructure environment.

Georgia Institute of Technology

POSTED

about 20 hours ago

DEADLINE

Cabling Design, Project Management & Technical SupportThe contract pertains to the engineering design of cabling systems, encompassing the planning and specification of structured cabling infrastructure for large-scale deployments. It also includes comprehensive project management services to oversee the execution, coordination, and timely delivery of cabling projects across multiple locations, ensuring alignment with technical standards and operational requirements. Technical support is a core component, requiring responsive troubleshooting, diagnosis, and repair of cabling-related issues to minimize downtime and maintain system integrity. The contract is classified as a subcontract under NAICS code 541330 and is issued by the Department of Information Resources in Texas. It was posted on August 7, 2026, with a submission deadline of September 24, 2026. While no specific location or point of contact is provided, performance is expected to support state-level initiatives under the Texas agency’s purview. Interested parties must respond through the designated state procurement portal before the deadline to be considered for award.

Department of Information Resources

POSTED

about 20 hours ago

DEADLINE

in about 2 months

More opportunities from Department Of Defense → W6QK Acc-Apg Cont Ct Software Sector

Same awarding agency

Fire Detection System Testing and CommissioningThe contract involves comprehensive testing, inspection, and commissioning of fire alarm and VESDA systems to ensure full compliance with NFPA 72, UFC-3-600, and operational readiness standards. The work requires detailed evaluation of system performance, calibration of detection devices, verification of control panel functions, and coordination with building systems to guarantee reliable operation under all conditions. All activities must be documented and certified to meet federal fire safety requirements and support mission-critical infrastructure integrity. This subcontract is issued under NAICS code 541350 and is associated with the Department of Defense through the W6QK Acc-Apg Cont Ct Software Sector. Performance is located at Fort Huachuca, Arizona, with a zip code of 85613. The solicitation was posted on August 7, 2026, and responses are due by August 11, 2026, at 4:00 PM. The contract emphasizes adherence to strict technical protocols and timely deliverables to ensure systems are fully functional and compliant prior to operational activation.

Building Inspection Services

POSTED

DEADLINE

Electrical Conduit and Wiring Installation (EMT)The contract mandates the installation of electrical metallic tubing conduit and fire-rated wiring dedicated to fire alarm and VESDA detection systems across the facility at Fort Huachuca, Arizona, with strict adherence to NEC Article 760 standards for fire alarm circuits. All work must ensure compliance with fire safety codes, including proper routing, support, and termination of wiring to maintain system integrity under fire conditions. The scope encompasses the full installation process from conduit fabrication and secure mounting to the placement and termination of rated cables, ensuring seamless integration with existing fire protection infrastructure. This subcontract, classified under NAICS code 238210 for electrical contracting, is issued by the Department of Defense through the W6QK Acc-Apg Cont Ct Software Sector and requires submission of proposals by August 11, 2026. Performance is exclusively tied to the location at Fort Huachuca with zip code 85613, and all contractors must be prepared to meet rigorous federal construction and safety requirements. The work is critical to maintaining life safety systems within a military installation, necessitating precision, documented compliance, and qualified personnel familiar with military facility protocols and fire protection system integration.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

VESDA System IntegrationThe contract involves the supply, installation, and commissioning of VESDA high-sensitivity smoke detection units across Chambers 1 through 4, with integrated cross-zone detection capabilities designed for secure environments requiring early fire detection. The system must meet stringent performance standards typical of military and defense-sensitive areas, ensuring rapid smoke identification and alarm activation even in low-smoke conditions. Installation must be completed in accordance with technical specifications for secure facility compliance, including configuration for seamless integration with existing security and monitoring infrastructure. The contract is classified as a subcontract under NAICS code 334511, related to instrumentation and laboratory equipment manufacturing, and is issued by the Department of Defense through the W6QK Acc-Apg Cont Ct Software Sector. Performance is required at Fort Huachuca, Arizona, with a bid response deadline of August 11, 2026. The solicitation was posted on August 7, 2026, and the work will be executed under a government contract framework with no specified set-aside type. All equipment must be fully operational and commissioned upon delivery, with documentation and training provided to ensure long-term system reliability and maintenance.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Addressable Fire Alarm System Design and InstallationThe contract entails the full design, supply, and installation of an addressable fire alarm system meeting stringent compliance standards under NFPA 72 and UFC-3-600, encompassing all core components including control panels, detectors, notification appliances, and associated wiring. This is a subcontract opportunity issued under NAICS code 238220, specifically for a Department of Defense project managed by the W6QK Acc-Apg Cont Ct Software Sector, with the work to be performed at Fort Huachuca, Arizona, 85613. The system must be engineered for reliable performance in a military environment, ensuring seamless integration and compliance with federal defense safety regulations. Proposals must be submitted by the deadline of August 11, 2026, at 4:00 PM, with the solicitation posted on August 7, 2026. While the contract type is classified as a subcontract, no set-aside preferences or organizational details are specified, and no point of contact information is provided. The successful bidder will be responsible for delivering a complete, code-compliant solution with full turnkey execution, including all materials, labor, and testing necessary for system activation and certification at the designated location.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Notice of Intent to Award Sole Source - Chamber Services, Inc.-

Solicitation # PANAPG26P0000052283

The U.S. Department of Defense, through the W6QK Acc-Apg Cont Ct Software Sector office located at Fort Huachuca, Arizona, has issued a Notice of Intent to Award a sole source contract to Chamber Services, Inc. for services under the NAICS code 339999, which covers other miscellaneous manufacturing. There is no set-aside designated for this procurement, meaning it is open without restrictions for small businesses or other socio-economic categories. The solicitation number is PANAPG26P0000052283, and the notice was posted on August 7, 2026, with a response deadline of August 11, 2026, at 4:00 p.m. Eastern Time. The place of performance is also Fort Huachuca, Arizona. Primary point of contact is Neil Mendiola, reachable at neil.s.mendiola.civ@army.mil, with secondary contact Rosa L Rascon at rosa.l.rascon.civ@army.mil. Additional details regarding the scope, requirements, and rationale for sole source selection are contained in the attached Notice of Intent to Award document, accessible via the provided SAM.gov link.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

ARMY OPEN SOLICITATION (AOS)

Solicitation # W9128Z-25-S-A002

The Army Open Solicitation (AOS), identified by solicitation number W9128Z-25-S-A002, is an indefinite, open solicitation issued by the U.S. Army Contracting Command – Aberdeen Proving Ground to rapidly acquire innovative commercial technologies and research-driven solutions across all Army mission areas. Designed to revitalizing the industrial base and enhancing Warfighter lethality, the solicitation leverages a flexible acquisition framework under multiple FAR, DFARS, and U.S. Code authorities, including Other Transactions, Commercial Solutions Opening, and prototype authorities. It supports both Active Capability Gap submissions and periodic Calls for Solutions, with responses evaluated based on technical merit, feasibility, schedule, price estimation, viability, and desirability using a trade-off approach rather than lowest price technically acceptable. The solicitation remains open indefinitely until canceled, with recent amendments through March 2026 expanding and clarifying Army Example Areas, refining submission procedures, and updating contracting information including Active Capability Gap mailboxes. All submissions must adhere to strict formatting requirements, including a single PDF submission not exceeding five pages or fifteen slides, with mandatory inclusion of an executive summary, company information, and rough order of magnitude cost and schedule estimates. Offerors must be registered in SAM, use WAWF for invoicing, and comply with stringent data storage and security requirements, including U.S.-only data hosting and full organizational conflict of interest disclosures. The solicitation encourages participation from small businesses, nontraditional defense contractors, and nonprofit research institutions, with specific certifications required through the Affirmation of Business Status Certification. Performance may occur at government facilities including Aberdeen Proving Ground and other CONUS/OCONUS locations as directed, with award timing anticipated in fiscal year 2026, and support expected through 2032. No fixed contract value is provided, as pricing is determined through competitive evaluation of commercial proposals under the solicitation's open-ended structure.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

Repair Buffalo Soldier Gate Fence

Solicitation # W91RUS26RA010

The contract titled Repair Buffalo Soldier Gate Fence is a small business set-aside solicitation issued by the Department of Defense under the Office of W6QK Acc-Apg Cont Ct Software Sector, located at Fort Huachuca, Arizona. The solicitation number is W91RUS26RA010 and was posted on July 22, 2026, with a response deadline of August 24, 2026, at 7:00 PM Eastern Time. It is classified under NAICS code 237990, indicating it pertains to other heavy and civil engineering construction, and is wholly reserved for small businesses as per the SBA’s Total Small Business Set-Aside guidelines. Work is to be performed at Fort Huachuca, Arizona, with no specific city or state provided beyond the ZIP code 85613. The primary point of contact for inquiries is Nadia Firestone, reachable by phone at 520-692-1411 or via email at nadia.i.firestone.civ@army.mil. Interested parties must submit proposals through the SAM.gov platform using the provided URL before the deadline to be considered.

Other Heavy and Civil Engineering Construction

POSTED

DEADLINE

Repair Van Deman Gate Fence

Solicitation # W91RUS26RA011

The contract titled Repair Van Deman Gate Fence is a small business set-aside solicitation issued by the Department of Defense under the W6QK Acc-Apg Cont Ct Software Sector, with solicitation number W91RUS26RA011 and NAICS code 237990. It is exclusively reserved for small businesses as defined under the SBA Total Small Business Set-Aside provision, ensuring opportunities for qualified small business contractors. The solicitation was posted on July 22, 2026, with a response deadline of August 24, 2026, at 7:00 PM Eastern Time. Work will be performed at Fort Huachuca, Arizona, 85613, and all performance obligations must be satisfied at this location. The primary point of contact for inquiries is Nadia Firestone, reachable via phone at 520-692-1411 or email at nadia.i.firestone.civ@army.mil. This contract falls under the Office category and is part of the broader Department of Defense infrastructure maintenance efforts focused on securing and restoring critical perimeter fencing assets at the Fort Huachuca installation.

Other Heavy and Civil Engineering Construction

POSTED

DEADLINE

Capstone Project Design and Evaluation for DE Certification ProgramThe contract entails the design and evaluation of a capstone project for the DE Certification Program, specifically tailored to allow trainees to apply digital engineering and model-based systems engineering principles to authentic U.S. Army acquisition scenarios. The project must incorporate structured rubrics for assessment, targeted mentoring support, and a clear methodology for evaluating trainee performance against defined competency benchmarks. Its purpose is to bridge theoretical knowledge with practical application in a military acquisition context, ensuring participants develop the skills necessary to contribute effectively to modern defense systems development. This effort is classified as a subcontract under NAICS code 611430, indicating an educational services focus, and is issued by the Department of Defense through the W6QK Acc-Apg Cont Ct Software Sector. The solicitation was posted on August 5, 2026, with a response deadline of August 11, 2026, at 4:00 PM. While details such as the place of performance and point of contact are not specified, the project is expected to operate within the broader framework of Army modernization initiatives and must align with existing DE and MBSE standards used across defense acquisition programs. The successful bidder will be responsible for creating a scalable, measurable, and pedagogically sound capstone experience that delivers tangible outcomes for certification readiness.

Professional and Management Development Training

POSTED

DEADLINE

Data Governance and Digital Thread Implementation TrainingThe contract seeks to deliver specialized training on managing engineering data through digital thread methodologies, focusing on establishing end-to-end traceability and seamless interoperability across disparate systems and platforms. Participants will learn how to implement governance structures that ensure data integrity, consistency, and accessibility throughout the product lifecycle, enabling efficient collaboration and decision-making in complex engineering environments. The training is designed to equip technical teams with practical skills to align data processes with industry best practices and support modernized defense acquisition and systems engineering workflows. Issued under the NAICS code 541690 for other professional, scientific, and technical services, this subcontract falls under the Department of Defense’s W6QK Acc-Apg Cont Ct Software Sector and is open for responses until August 11, 2026. The work is not subject to a specific set-aside classification, and performance location details are not specified, indicating flexibility in delivery format or site. While no point of contact is listed, the opportunity is accessible via the SAM.gov portal, and proposers are expected to demonstrate expertise in digital thread frameworks, data governance, and cross-platform integration within defense or aerospace engineering contexts.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Cybersecurity Integration via NIST RMF in Digital Engineering TrainingThe contract seeks to deliver specialized training on integrating the NIST Risk Management Framework into Digital Engineering workflows to enhance secure development practices, ensure proper data handling, and maintain model integrity throughout the system lifecycle. This effort is targeted at organizations and personnel involved in cyber-secure engineering environments, with a focus on embedding NIST RMF controls directly into digital engineering processes to reduce vulnerabilities and promote compliance with federal cybersecurity standards. The training must be practical, hands-on, and aligned with current DoD cyber resilience objectives. Issued as a subcontract under the Department of Defense’s W6QK Acc-Apg Cont Ct Software Sector, the opportunity is classified under NAICS code 541690 for Other Scientific and Technical Consulting Services. The solicitation was posted on August 5, 2026, with a response deadline of August 11, 2026, at 4:00 PM. There is no specified set-aside status or place of performance location, and the contract does not include a designated point of contact. Interested parties must submit proposals through the provided SAM.gov link before the deadline to be considered for award.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

AI and LLMs Integration in Systems Engineering TrainingThe contract seeks the development and delivery of specialized training modules focused on integrating artificial intelligence and large language models into systems engineering workflows, with emphasis on practical applications in requirements generation, risk analysis, and documentation automation. The training is designed to equip systems engineering professionals with the skills to leverage AI tools effectively, improving efficiency and accuracy in critical project phases. The work is structured as a subcontract under the Department of Defense, specifically managed by the W6QK Acc-Apg Cont Ct Software Sector, and classified under NAICS code 541715 for research and development in the physical, engineering, and life sciences. The solicitation was posted on August 5, 2026, with a deadline for responses set for August 11, 2026, at 4:00 PM. Performance location and specific agency office details are not provided, and no set-aside provisions or point of contact information are included in the posting.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE